Professional Documents
Culture Documents
Piston, Engine TESTING
Piston, Engine TESTING
X F4-2.5L DOHC Turbo (2006) > Engine, Cooling and Exhaust > Engine > Cylinder Block Assembly > Piston, Engine > Component Information > Specifications …
Custom Search
Search Piston: Testing and Inspection
INSPECTION
Privacy Policy
CYLINDER AND PISTON
1. The cylinder bore size is stamped on cylinder block's front upper surface.
Donate and help keep workshop manuals
freely available. NOTE:
^ Measurement should be performed at a temperature of 20°C (68°F).
^ Standard sized pistons are classified into two grades, "A" and "B". These grades should be used as a guide line in selecting a standard
piston.
Standard diameter.
99.505 - 99.515 mm (3.9175 - 3.9179 inch)
99.495 - 99.505 mm (3.9171 - 3.9175 inch)
Other Subaru Workshop Manuals
Other Makes
Taper.
Standard 0.015 mm (0.0006 inch)
Limit 0.050 mm (0.0020 inch)
Out-of-roundness:
Standard 0.010 mm (0.0004 inch)
Limit 0.050 mm (0.0020 inch)
Engine, Cooling and Exhaust > Engine > Cylinder Block Assembly > Piston, Engine > Component Information > Specifications > Page 1370
[PREV P
https://workshop-manuals.com/subaru/impreza_wrx/f4-2.5l_dohc_turbo/engine_cooling_and_exhaust/engine/cylinder_block_assembly/piston_engine/component_information/specifications/page_1370/ 2/2