Professional Documents
Culture Documents
TS-L.C Quick Guide
TS-L.C Quick Guide
TS-L.C Series
Balance Series
1. CONTENT
Models: TS-L-225.C
Balance Weighing pan Draft shield Centring ring Bottom insert Power adapter
x1 x1 x1 x1 x1 x1
Balance Weighing pan Draft shield Grounding foot Foot Power adapter
x1 x1 x1 x1 x3 x1
Models: TS-L-6002.C
Balance Weighing pan Draft shield Grounding foot Foot Power adapter
x1 x1 x1 x1 x1 x1
2. WORKROOM AND BASIC OPERATION GUIDELINES
o Operate the device in a room where the temperature ranges between 10–40 °C
+40 C
(50–104 °F) and where the relative humidity is below 80%.
+104oF
o
Place the balance on a solid surface to ensure stability. To obtain stable and
+10 C repeatable weighing results, an anti-vibration table is recommended.
+50 oF
Place the balance away from heat Avoid exposing the balance to a Do not place the balance in a hazardous
sources. Avoid exposing the balance magnetic field. Do not weigh area. Do not weigh explosive materials.
to the sunlight. magnetic substances.
Avoid air drafts and air movements Make sure that the balance is placed Do not place the balance on an unstable
at the workstation. on an even surface. ground exposed to shocks and vibrations.
3. UNPACKING
1 2 TOP 3
1 2
Keep the transport
lock should a
warranty claim or
service be required.
1 2
Keep the transport
lock should a
warranty claim or
service be required.
1 2 3 4
1 2 3
1 2 3
Install the
grounding foot
in a freely
selected
opening.
1 Install the 2
grounding foot
in a freely
selected
opening.
Models: TS-L-6002.C
1 2 Install the 3
grounding foot
in a freely
selected
opening.
6. PREPARING FOR WORK
Prior to switching the device on it is necessary Balance temperature stabilization time ranges
to ensure that it has reached a temperature between 1 - 8 hours.
equal to room temperature.
rn
Ethe
SB 2
1 U
USB
Connect the power adapter to DC connector. Connect the power adapter to the mains.
8.1. Adjustment
1 2
Press key to start the adjustment Wait for the adjustment completion
8.2. Zeroing
1 2
Unload the weighing pan and press The balance has been zeroed.
"Zeroing" button.
8.3. Taring
1 2
When the weighing result has been The balance has been tared.
displayed press "Tare" button.
8.4. Working modes accessibility
1 2
3 4
In the "Accessibility" position, press key Using keys to select working modes for
which accessibility is to be set and press
key.
1 2
Press key to enter working modes menu. Using keys, select working mode and
press key to confirm.
1 2
Press to enter "Setup" menu. Using keys, select "Units" and press
key
3 4
In the "Accessi
"Accessibility" position, press Using keys to select unit for which
accessibility is to be set and press key.
1 2
Press key to enter "Database" menu To enter user parameters, press key
3 4
Using keys select "Admin" and press Using keys select "1111" and press
key to confirm key to confirm.
1 2
3 4
To select "Users" parameters, press key Using keys select "Admin" and press
key to confirm.
Press key to add new user. Using keys to enter user name and
8 9
Using keys select "Code" and press key Using keys enter user code and
press key to confirm
10 11
Using keys select "Password" and press Using keys enter user password and
key to confirm press key to confirm
12 13
Using keys select "Access Level" and Using keys select permissions level and
press key to confirm. press key to confirm.
14 15
Using keys select "Language" and press Using keys to select menu language
key to confirm press key to confirm.
10. PERIPHERAL DEVICES CONNECTORS
Power adapter
Additional Barcode Additional Barcode scanner
display scanner display
DB9 DB9
DC RS 232 RS 232
Keyboard
Computer Printer
Computer
Barcode Printer
scanner
11. DEVICE CLEANING
Prior to cleaning, it is necessary to Use soft cloths made of microfiber, Apply the cleanser onto the cloth first.
disconnect th e balance from the mains. natural fiber or man-made fiber. Avoid Avoid applying the cleanser directly
using abrasive cloths or cloths that might onto the device.
scratch the surface.
Avoid using cleansers containing chlorine, corrosive chemicals and bleach. Do not use
cleansers containing abrasive substances or scouring preparations.