Professional Documents
Culture Documents
ChemFlo As
ChemFlo As
ChemFlo As
ChemFlo AS
Antistatic self‐levelling epoxy floor system
DESCRIPTION APPLICATION
ChemFlo AS is a pigmented, ready-to-use, solvent-free The A-component must be stirred for at least 1–2
2-component floor coating system of high-grade epoxy minutes. Then the entire content of the B-component is
resin. ChemFlo AS used with the conductive layers emptied into the A-component container and the two
ChemFlo AS Primer, produces tough, electrically components are homogeneously mixed using a suitable
conductive coatings according to DIN 51953 / electric stirrer (for at least 2–3 minutes). The inclusion of
DIN EN 1081 / DIN IEC 93, which are easy to clean and air in the mixing process is to be avoided. The mixture is
exhibit a good level of resistance to fuels and lubricants, poured into another container and briefly stirred again.
most solvents and many chemicals. ChemFlo AS is poured onto the surface and spread over
the entire area using a serrated spatula (tooth size no.
USES 25) (layer thickness control). The fluid coating can be
rolled with a spiked roller, as required. The operative
ChemFlo AS is used as a conductive surface coating wears spiked shoes to walk on the still wet coating. It may
system for industrial floors with high demands in terms of be necessary to activate the floor coating electrically after
electrostatic discharge, especially in explosion proof it has fully cured.
areas and fire protection zones.
Areas of application are chemical plants, places where
organic (flammable) solvents are stored and surrounding PHYSICAL PROPERTIES
areas, hospitals, operating theatres electronic
manufacturing, packing and others. LIQUID MIXTURE (A+B)
98%
ANTISTATIC FLOORING SYSTEM Solid Content
Solvent/ Additives 2%
ChemFlo AS is used as a topcoat for the following Density (20º C) 1.5 g/cm
3
CHEM COATS PRIVATE LIMITED
Monnoo Chowk, Defence Road, Off Raiwind Road, Near Nobel TV, Lahore, Pakistan.
Tel: +92 42 35322201-03 Fax: +92 42 35322204 www.chemcoats.com.pk Email: info@chemcoats.com.pk
CHEM COATS PRIVATE LIMITED
PHYSICAL PROPERTIES
IMPORTANT NOTE
LIQUID MIXTURE (A+B)
100 : 19 by weight
The information given in this data sheet is based on
Mixing ratio A : B current development work and many years of field
Processing time (20°C) 20–25 min. experience. Whilst every effort is made to ensure that the
Processing temperature 15–25°C (min. 3°C above information is reliable, we cannot accept responsibility for
Material consumption approx. 1800 g/m2 any work carried out with our materials as we have no
Can be walked on (20°C) after approx. 24 hours
controls over methods of applications, site conditions etc.
In view of the continuing research and development being
Consecutive layer (20°C) within 12–24 hours
undertaken in our laboratories we advice customers in
their own interest to ensure that this data sheet has not
Fully capable of withstanding
been superseded by a more up-to-date publication. All
stress
mechanical (20°C) products are sold subject to our standard conditions of
after 7 days
chemical (20°C) sale which are available on request. Field services, where
after 28 days
provided, does not constitute supervisory responsibility.
For additional information, please contact your local
REWORKING ChemCoats representative.
If reworking the coating layer within 24 hours after
application the layer need not be ground. Reworking after
that is only possible after grinding it carefully.
PROTECTION/MAINTENANCE ON COMPLETION
PACKAGING
RANGE OF PRODUCTS
WATERPROOFING SYSTEMS PREPACKED REPAIR MORTARS SEALANTS
INDUSTRIAL FLOOR SURFACES CEMENTITIOUS & EPOXY GROUTS CRACK INJECTION
PROTECTIVE COATINGS CONCRETE ADMIXTURES CONCRETE ADHESIVE
CHEM COATS PRIVATE LIMITED
Monnoo Chowk, Defence Road, Off Raiwind Road, Near Nobel TV, Lahore, Pakistan.
Tel: +92 42 35322201-03 Fax: +92 42 35322204 www.chemcoats.com.pk Email: info@chemcoats.com.pk