Professional Documents
Culture Documents
M-ANM-300000-GH00-FOR-000198 - Hot Work Checklist
M-ANM-300000-GH00-FOR-000198 - Hot Work Checklist
TIME START
YES
YES
YES
YES
YES
YES
YES
NO
NO
NO
NO
NO
NO
NO
PRE-TASK INSPECTION
1 A valid work permit available at work area?
NOTE:
1. Prior to start of the activity, this checklist must be properly filled-up and
signed by the Work In charge / Supervisor.
2. Any Hot Work activity WILL NOT START if deviation will be found on
any of the requirements on this checklist.
Signature:
Signature:
Signature:
Signature:
Signature:
Signature:
Signature:
3. Avoid any Hot Work activity in the Basement Area, Energized Rooms
Name:
Name:
Name:
Name:
Name:
Name:
Name:
POST-INSPECTION
Housekeeping was done after the activity; extension cords and welding
1
cables properly arranged?
All electrical tools / extension cords are unplugged and shut-off? i.e.
2
welding equipment, power tools, etc.
Removal and wetting of fire blanket and scaffold planks to ensure area
3
is free from hot slugs and/or molten metals done?
Returning of portable fire extinguisher, fire bucket, etc. at designated
4
area or staging point done?
Hot Work activity ended at ______________
5
and fire watcher on standby for a minimum of 30 minutes?
NOTE:
The Hot Work PERMIT TO WORK (PTW) shall NOT BE CLOSED until all of the Post-Inspection requirements are complied with.
REMARKS _______________________________________________________________________________
_________________________________________________________________________________________
_________________________________________________________________________________________
M-ANM-300000-GH00-FOR-000198 28 July 2019