Professional Documents
Culture Documents
66 Full Test 2
66 Full Test 2
My Tests Subject: CE
(../studentpanel/page.php? Language: English
page=product&view=product_list)
Q.1
My Results Choose the one which can be substituted for the given sentence.
(../studentpanel/page.php?
Occurring at regular intervals in time.
page=report&view=overall_report)
Epidemic
✉ Message Endemic
(../studentpanel/page.php?
Temporal
page=message&view=message_list)
Sporadic
Solution
Documents
(../studentpanel/page.php? Occurring at regular intervals in time Sporadic.
page=doc&view=doc_list)
Unseen
News & Updates
(../studentpanel/page.php? Your Ans
page=news&view=news_list)
Correct Ans d
Time (Secs) 0
Bookmarked
Questions Bookmark
(../studentpanel/page.php?
page=bookmarkq&view=q_list) Q.2
Injurious
Shattering
Destructive
Disparaging
Solution
Unseen
Your Ans
Correct Ans d
Time (Secs) 0
Bookmark
Q.3
The manager wanted to meet you __________ the theft in the office.
referring to
with regard to
with reference to
in connection with
Solution
Unseen
Your Ans
Correct Ans d
Time (Secs) 0
Bookmark
Q.4
Solution
If divisor is less than 1 from base of the polynomial then remainder is always 1.
Unseen
https://iesmaster.org/onlinetestseries/tm/studentpanel/page.php?page=report&view=test_report&test_id=167 1/29
7/29/2019 Student Test Report | TestMent
Your Ans
Correct Ans c
Time (Secs) 0
Bookmark
Q.5
M2
3M2
8M
9M2
Solution
{a + b + c}2 = {3M}2
a2 + b2 + c2 = 9M2
Unseen
Your Ans
Correct Ans b
Time (Secs) 0
Bookmark
Q.6
In Gumbel’s distribution the relation between the reduced variateyT and the return period Tr is given by
Solution
Unseen
Your Ans
Correct Ans a
Time (Secs) 0
Bookmark
Q.7
A rising gradient of 1 in 40 meets a falling gradient of 1 in 60. The length of vertical curve if the stopping sight distance is 120m.
116 m
126 m
136 m
146 m
Solution
N = n1 – (–n2)
= n1 + n2
= =
Assuming L > S.
L= = = 136.4m
Unseen
Your Ans
Correct Ans c
Time (Secs) 0
Bookmark
https://iesmaster.org/onlinetestseries/tm/studentpanel/page.php?page=report&view=test_report&test_id=167 2/29
7/29/2019 Student Test Report | TestMent
Q.8
Suppose that a ‘X’ is a continuous random variable whose probability density function in given by
F(x) =
3/8
5/8
4/7
1/3
Solution
Total probability
c= .
Unseen
Your Ans
Correct Ans a
Time (Secs) 0
Bookmark
Q.9
For what value of a, the system of linear equations has a non-trivial solutions?
x – ay + z = 0
2x – y – 2z = 0
2x + y + 2z = 0
0.5
1.0
– 0.5
–1
Solution
Given system is a homogeneous system AX = 0. The condition for many solutions of AX = 0 is |A| = 0 (or) f(A) number of variables = 3.
=0
1 (– 2 + 2) + a (4 + 4) + 1 (4 + 4) = 0
8a + 4 = 0
a = – 1/2 = – 0.5.
Unseen
Your Ans
Correct Ans c
Time (Secs) 0
Bookmark
Q.10
In a state of plane strain, the shear strain is equal to 12µ in x-y plane and the normal strain is equal to 0, in x and y-direction. The diameter as the Mohr’s
circle of strain will be.
6µ
8µ
12µ
24µ
Solution
=0
Normal strain =0
https://iesmaster.org/onlinetestseries/tm/studentpanel/page.php?page=report&view=test_report&test_id=167 3/29
7/29/2019 Student Test Report | TestMent
= 12µ
Unseen
Your Ans
Correct Ans c
Time (Secs) 0
Bookmark
Q.11
A cantilever beam of length 4m carries UDL of intensity through out as length. If the maximum bending moment in the cantilever beam is 100 kN-m and
EI is the flexural rigidity as the beam. Slope of the free end of the cantilever beam will be
Solution
Given data :
Mmax=100kN-m
L = 4,
Unseen
Your Ans
Correct Ans b
Time (Secs) 0
Bookmark
Q.12
Solution
3-moments theorem is applicable to only continuous beams. The beam need not be prismatic and there can be settlement of supports. Besides the spans may
be unequal.
Unseen
Your Ans
Correct Ans c
Time (Secs) 0
Bookmark
Q.13
L.L = 60%
PL = 25%
https://iesmaster.org/onlinetestseries/tm/studentpanel/page.php?page=report&view=test_report&test_id=167 4/29
7/29/2019 Student Test Report | TestMent
According to Indian standard classification system, the soil is classified as
CL
CH
CI
MH
Solution
Since more than 50% passes through 75 µ sieve, it is fine grained soil
Ip of soil = 60 – 25 = 35%
Soil classification = CH
Unseen
Your Ans
Correct Ans b
Time (Secs) 0
Bookmark
Q.14
A rectangular beam of effective dimension 250mm × 350 mm is subjected to factored shear force of 30 kN. Calculate the spacing of 2-lagged 6 mm dia
vertical strips. (in mm)
180
200
250
Solution
Sv
Sv 204.2 mm
Unseen
Your Ans
Correct Ans b
Time (Secs) 0
Bookmark
Q.15
In steady flow through a pipe, the density, velocity and area at a section are 3 kg/m3, 8m/sec and 0.5m2 respectively. The velocity at another section having
area of 1m2 and density of 4kg/m3 will be
2 m/sec
3 m/sec
4 m/sec
1 m/sec
Solution
By continuity equation
3 × 0.5 × 8 = 4 × 1 × V2
https://iesmaster.org/onlinetestseries/tm/studentpanel/page.php?page=report&view=test_report&test_id=167 5/29
7/29/2019 Student Test Report | TestMent
Unseen
Your Ans
Correct Ans b
Time (Secs) 0
Bookmark
Q.16
2000 m3/day of wastewater having BOD of 400 mg/l is treated in ASP at 90% efficiency. Assuming net VSS production as 0.25 kg per day of BOD removed
and phosphorous content is 2% of the VSS produced. The phosphorous removal in kg per day is _____.
7.5
3.6
4.5
Solution
Incoming BOD =
Unseen
Your Ans
Correct Ans c
Time (Secs) 0
Bookmark
Q.17
Identical
Solution
Unseen
Your Ans
Correct Ans b
Time (Secs) 0
Bookmark
Q.18
If a sample of air is analysed at standard temperature and pressure and is found to contain 0.3 ppm of SO2, The equivalent SO2 concentration in µg/m3 will be
{Given : atomic weight of S = 32 gm and O = 16 gm}
8570
857
85.7
0.857
Solution
Unseen
Your Ans
Correct Ans b
Time (Secs) 0
Bookmark
Q.19
Match the List-I with List-II and select the correct answer using the codes given below.
https://iesmaster.org/onlinetestseries/tm/studentpanel/page.php?page=report&view=test_report&test_id=167 6/29
7/29/2019 Student Test Report | TestMent
List-I (Type of Irrigation)
P.Border Irrigation
Q.Furrow Irrigation
R.Sprinkler Irrigation
S.Drip-Irrigation
1.
2.
3.
4.
Codes:
Solution
Unseen
Your Ans
Correct Ans b
Time (Secs) 0
Bookmark
Q.20
The concrete floor of a head regulator is level with the channel bed and is 13 m long. The floor is provided with u/s cutoff usually at its upstream and d/s ends.
Depth of u/s cutoff is 2m and the d/s wall is 2m long. The exit gradient is ____________.
12.36%
39.4%
16.35%
24.09%
Solution
d=2m, Hs = 2m, b = 13 m
=3.7882
= = 0.163
= 16.36%
Unseen
Your Ans
Correct Ans c
Time (Secs) 0
Bookmark
Q.21
A simply supported beam of triangular cross section carries a uniformly distributed load. The ratio of length of plastic hinge to total length will be _______.
0.571
0.642
0.707
0.756
Solution
https://iesmaster.org/onlinetestseries/tm/studentpanel/page.php?page=report&view=test_report&test_id=167 7/29
7/29/2019 Student Test Report | TestMent
for triangular section, SF = 2.34
Unseen
Your Ans
Correct Ans d
Time (Secs) 0
Bookmark
Q.22
What is the design shear strength of 20 mm bolts of 4.6 grade, used in a lap joint such that the distance between first and last bolt in the joint measured in
direction of load is 400 mm.
45.27 kN
44.14 kN
40.74 kN
51.26 kN
Solution
Vdsb =
= 1.075 – 0.005
INFO]{mp=1,mn=0.33}
Unseen
Your Ans
Correct Ans b
Time (Secs) 0
Bookmark
Q.23
Parallel to grains
45° to grains
Perpendicular to grains
Solution
Unseen
Your Ans
Correct Ans a
Time (Secs) 0
Bookmark
Q.24
Vector overlay
Buffer operation
Raster overlay
Intersecting operation
Solution
Unseen
Your Ans
Correct Ans a
Time (Secs) 0
Bookmark
Q.25
https://iesmaster.org/onlinetestseries/tm/studentpanel/page.php?page=report&view=test_report&test_id=167 8/29
7/29/2019 Student Test Report | TestMent
A bar of circular section of dia ‘D’ is subjected to a torque ‘T’ as shown in figure. The angle of twist at X is k times as that at Y (with respect to fixed end z).
The value of ‘k’ is____
Solution
Unseen
Your Ans
Time (Secs) 0
Bookmark
Q.26
A finite soil slope is to be made from soil with the following properties c = 30 kN/m2, kN/m3. Taking FOS = 3, Sn = 0.12, the safe height of
slope (in m correct upto two decimal places) would be.
Solution
Sn =
0.12 =
H = 4.63 m
Unseen
Your Ans
Time (Secs) 0
Bookmark
Q.27
A large cubic ice block (S = 0.9) floats in seawater (S = 1.05). If a 5 cm high portion of ice block extends above the water surface, then the complete height of
the ice block in ‘m’ is ________. (Answer correctupto two decimal place).
Solution
By equIlibrium
Wice cube=FB
0.9 × h =1.05 (h – 5)
h =35 cm
https://iesmaster.org/onlinetestseries/tm/studentpanel/page.php?page=report&view=test_report&test_id=167 9/29
7/29/2019 Student Test Report | TestMent
Unseen
Your Ans
Time (Secs) 0
Bookmark
Q.28
In a very wide rectangular channel the rate of flow is increased by 40% due to the heavy rain and the water surface slope is 0.45 times to its original value.
The approximate change in the depth of water level (in%, correct upto one decimal place) will be.
Solution
So increased by 55.4%.
Unseen
Your Ans
Time (Secs) 0
Bookmark
Q.29
A Kaplan turbine develops 15 MW of shaft power under a net head of 8.0 m. The speed of rotation of the runner is 85 rpm. The hub diameter of the turbine
will be ____ m (Take speed ratio 2 and ratio of hub dia to runner diameter 0.3) {Answer correct upto two decimal place}
Solution
H=8m
Ku (speed ratio) = 2
N = 85 rpm
We know that
DI = runner diameter
Unseen
Your Ans
Time (Secs) 0
Bookmark
Q.30
For a flow of 5.7 MLD and a detention period of 2 hours, the surface area of a rectangular sedimentation tank to remove all particles having settling velocity of
0.33 mm/sec is _______ m2. {Answer correct upto one decimal place}
Solution
https://iesmaster.org/onlinetestseries/tm/studentpanel/page.php?page=report&view=test_report&test_id=167 10/29
7/29/2019 Student Test Report | TestMent
V = 1.188 m/hr
Unseen
Your Ans
Time (Secs) 0
Bookmark
Q.31
The bar graph given below shows the sales of books (in thousand number) from six branches of a publishing company during two consecutive years 2000
and 2001.
What percentage of the average sales of branches B1, B2 and B3 in 2001 is the average sales of branches B1, B3 and B6 in 2000?
114.3%
77.5%
82.5%
87.5%
Solution
= × (80 + 95 + 70) =
= × (105 + 65 + 110) =
Required percentage =
Unseen
Your Ans
Correct Ans d
Time (Secs) 0
Bookmark
Q.32
Find the number of positive integersupto 100 which are not divisible by any 2, 3 and 5?
27
26
25
24
Solution
https://iesmaster.org/onlinetestseries/tm/studentpanel/page.php?page=report&view=test_report&test_id=167 11/29
7/29/2019 Student Test Report | TestMent
Total number of numbers upto 100 which are divisible by atleast one of 2, 3 and 5 = 74
Total number of numbers upto 100 which are not divisible by any 2, 3 or 5 = 100 – 74 = 26
Unseen
Your Ans
Correct Ans c
Time (Secs) 0
Bookmark
Q.33
Statements :
No pocket is a pouch
Conclusions :
Solution
Some bags are pockets. So some pockets must be bags. Also, when ‘Some bags are pockets’ and ‘No pockets are pouches’ then we can conclude that some
bags (which are pockets) are not pouches. Therefore only conclusion 2 and 3 are correct.
Unseen
Your Ans
Correct Ans b
Time (Secs) 0
Bookmark
Q.34
200 litres of mixture contains 15% water and the rest is milk. The amount of milk that must be added so that the resulting mixture contains 87.5% milk is
30 litres
35 litres
40 litres
45 litres
Solution
170 + x =
170 + x =
= 1360 + 8x = 1400 + 7x
https://iesmaster.org/onlinetestseries/tm/studentpanel/page.php?page=report&view=test_report&test_id=167 12/29
7/29/2019 Student Test Report | TestMent
Unseen
Your Ans
Correct Ans c
Time (Secs) 0
Bookmark
Q.35
A man sold his goods at 44% loss. He used 30% less weight than actual. Find his profit or loss %.
30%, loss
22%, profit
20%, loss
25%, profit
Solution
Loss % =
Unseen
Your Ans
Correct Ans c
Time (Secs) 0
Bookmark
Q.36
A function is defined as
Solution
https://iesmaster.org/onlinetestseries/tm/studentpanel/page.php?page=report&view=test_report&test_id=167 13/29
7/29/2019 Student Test Report | TestMent
Unseen
Your Ans
Correct Ans b
Time (Secs) 0
Bookmark
Q.37
Solution
Let
So,
Unseen
Your Ans
Correct Ans b
Time (Secs) 0
Bookmark
Q.38
A prismatic bar of volume ‘V’ is subjected to a compressive force in the longitudinal direction. If ‘µ’ is the poisson’s ratio and ‘e’ is the longitudinal strain, then
the final volume of the bar will be.
(1 + e) (1 – µ2)V
(1 + e) (1 + µe)2 V
(1 – e2) (1 + µe) V
(1 – e) (1 + µe)2 V
Solution
Longitudinal strain = e
Length=(1 – e)L = L’
Breadth=B’ =
Height=H’ =
where L’, B’, H’ are new dimensions and L, B, H are original dimension.
V’=New volume
V’=L’B’H’ =
Unseen
Your Ans
Correct Ans d
Time (Secs) 0
Bookmark
Q.39
The value of fixed end moments at ‘A’ for the loaded beam as shown is
https://iesmaster.org/onlinetestseries/tm/studentpanel/page.php?page=report&view=test_report&test_id=167 14/29
7/29/2019 Student Test Report | TestMent
Solution
Because end B is a hinge, so we apply a counter moment = . The other end A being fixed, half of the counter moment gets carried over.
Unseen
Your Ans
Correct Ans c
Time (Secs) 0
Bookmark
Q.40
A concrete pile, 40 cm diameter is driven upto 25 m into a soft clay (cu = 25 kN/m2, kN/m3). Determine the allowable load using Vijayvergia and
Focht method. (FOS = 2.5). The water table is at ground surface. Take
https://iesmaster.org/onlinetestseries/tm/studentpanel/page.php?page=report&view=test_report&test_id=167 15/29
7/29/2019 Student Test Report | TestMent
61.6 kN
168.4 kN
292.5 kN
295.0 kN
Solution
Point resistance, Qp = Cu Nc Ap
= = 28.3 kN
Skin friction =
Qs= fsAs
Qa = = 292.5 kN
Unseen
Your Ans
Correct Ans c
Time (Secs) 0
Bookmark
Q.41
A concrete dam having sheet piles on both heel and toe which extend half way down to an impervious stratum. The water head is 10 m on u/s face and 1 m
and d/s face. From a flow net made up of square figures in the transformed scale it is found, there are 5 seepage paths and 18 equipotential drops. If the avg.
value of coefficient of permeability is 6 × 10–5 cm/sec horizontally and 2 × 10–5 cm/sec vertically. The seepage through the dam is
0.433 cm3/sec/m
0.866 cm3/sec/m
1 cm3/sec/m
1.33 cm3/sec/m
Solution
Q=
Ke =
H = 10 – 1 = 9 m
Nf = 5
Nd = 18
Q=
= 0.866 cm3/sec/m
Unseen
Your Ans
Correct Ans b
Time (Secs) 0
Bookmark
Q.42
An embankment will be constructed of soil having c' = 4.0 kg/cm2 & . The shear strength of the material on a horizontal plane at a point 10 m below
the surface of embankment if bulk density of soil is 2.3 g/cc and the pore pressure at that point is 1.8 kg/cm2.
4.24 kg/cm2
8.48 kg/cm2
2.12 kg/cm2
5.12 kg/cm2
Solution
= 26°
u = 1.8 kg/cm2
= 2.3 gm/cc
shear strength =
https://iesmaster.org/onlinetestseries/tm/studentpanel/page.php?page=report&view=test_report&test_id=167 16/29
7/29/2019 Student Test Report | TestMent
= × 10
= 2.3 kg/cm2
= 2.3 – 1.8
= 0.5 kg/cm2
= 4 + 0.244
s= 4.244 kg/cm2
Unseen
Your Ans
Correct Ans a
Time (Secs) 0
Bookmark
Q.43
Match List-I with List-II and select the correct answer by using codes given below.
A.Bandage joint
C.Collar joint
List-II
2.Concrete pipes
Codes:
Solution
Unseen
Your Ans
Correct Ans a
Time (Secs) 0
Bookmark
Q.44
After applying geometric increase method the population in the year 2000 will be ______.
47066
74166
74000
74066
Solution
https://iesmaster.org/onlinetestseries/tm/studentpanel/page.php?page=report&view=test_report&test_id=167 17/29
7/29/2019 Student Test Report | TestMent
= 16.37%
Unseen
Your Ans
Correct Ans d
Time (Secs) 0
Bookmark
Q.45
Solution
I:
II :
https://iesmaster.org/onlinetestseries/tm/studentpanel/page.php?page=report&view=test_report&test_id=167 18/29
7/29/2019 Student Test Report | TestMent
Collapse load =
Unseen
Your Ans
Correct Ans d
Time (Secs) 0
Bookmark
Q.46
For a cantilever prestressed beam of span L, the cable profile equation to be provided such that profile exactly balance external loading is given by.
Solution
Py = …(i)
y=
At x = L, y = l
e= …(ii)
https://iesmaster.org/onlinetestseries/tm/studentpanel/page.php?page=report&view=test_report&test_id=167 19/29
7/29/2019 Student Test Report | TestMent
Unseen
Your Ans
Correct Ans b
Time (Secs) 0
Bookmark
Q.47
A continuous beam of effective dimension 200 mm × 300 mm carries 4 no of 16 mm dia longitudinal bars, with MOR = 43.56 kNm. Calculate the factored
shear force at the point of inflection so as to be safe in bond.
Given, M20 and Fe 250 grades of materials are used and = 1.5 MPa
130 kN
75 kN
155 kN
180 kN
Solution
Ld =
Ld= 580mm
580
V = 155.6 kN
Unseen
Your Ans
Correct Ans c
Time (Secs) 0
Bookmark
Q.48
Given that :
Scale of photograph is 50 m = 1 cm
Size of photograph = 18 cm × 18 cm
Side overlap =
200
400
500
600
Solution
Length of photograph, I = 18 cm
Width of photograph, w = 18 cm
Scale, S =
N=
= 499.75 500
Unseen
Your Ans
Correct Ans c
Time (Secs) 0
Bookmark
Q.49
https://iesmaster.org/onlinetestseries/tm/studentpanel/page.php?page=report&view=test_report&test_id=167 20/29
7/29/2019 Student Test Report | TestMent
Horton’s infilteration equation for a basin is given by f(t) = fc + (f0 – fc)e–kt where f(t) in cm/hr and ‘t’ is in hrs, Initial Infilteraton rate was 10 cm/hr. which
decreased to a equilibrium value of 1 cm/hr after 10 hrs of rainfall, assume decay constant to be 2 per hr, the depth of infilteration in the first 5 hrs will be
_________ mm. {Answer correct upto one decimal place}.
Solution
f(t)=
f(t)=
=9.5 cm = 95 mm
Unseen
Your Ans
Time (Secs) 0
Bookmark
Q.50
Anemometers at 2.5m and 40m on a tower record wind speed of 2 and 5 m/sec respectively. Wind speed (in kmph) at 30 m will be. (Answer correctupto one
decimal place).
Solution
k=0.33
Unseen
Your Ans
Time (Secs) 0
Bookmark
Q.51
A valley curve of a state highway is formed by a descending gradient of 1 in 20 meeting an ascending gradient of 1 in 30. The length of valley curve to fulfill
both comfort condition and head light sight distance required for a design speed of 80 kmph will be _____m. {Assume c = 0.60 m/sec3, t = 2.5 sec, f = 0.35}
Solution
Given, n1 = , n2 =
Deviation angle N = n1 – n2 = – =
L= ...(1)
= 127.63m
https://iesmaster.org/onlinetestseries/tm/studentpanel/page.php?page=report&view=test_report&test_id=167 21/29
7/29/2019 Student Test Report | TestMent
Unseen
Your Ans
Time (Secs) 0
Bookmark
Q.52
The total cross-sectional area of longitudnal reinforcing steel required for a cement concrete pavement of slab width 3.75m, 15m long and 200mm thick is
equal to _____ mm2.
Given that concrete weight is 2400 kg/m3 and working stress in steel is 1400 kg/cm2. {Take coefficient of friction = 1.5}
Solution
Assuming that the reinforcement takes the entire tensile force in slab caused by the frictional resistance of subgrade
Ast × = ×W
Ast=
= 9.643 cm2
= 964.3mm2
Unseen
Your Ans
Time (Secs) 0
Bookmark
Q.53
The value of the integral of the function g(x, y) = 4x5 + 10y6 along the straight line segment from the point (0, 0) to the point (1, 3) in the x-y plane is. {Answer
correct upto one decimal place}
Solution
Unseen
https://iesmaster.org/onlinetestseries/tm/studentpanel/page.php?page=report&view=test_report&test_id=167 22/29
7/29/2019 Student Test Report | TestMent
Your Ans
Time (Secs) 0
Bookmark
Q.54
A copper bar 2m long with an area of 200 mm2 is placed between two rigid walls at a temperature of –20°C. There was a gap of 3mm between one of the wall
and end of bar. Coefficient of thermal expansion and modulus of elasticity are 15 × 10–6 per °C and 70 GPa respectively. The temperature at which stresses in
the bar will be 30 MPa is _____°C. (Answer correctupto two decimal places).
Solution
L = 2m, A = 200 mm2
Thermal elongation=
= 0.03 (T+20) mm
free expansion = 3 mm
Thermal stress =
30= 70×103 ×
T = 8.57°C
Unseen
Your Ans
Time (Secs) 0
Bookmark
Q.55
A beam system is loaded as shown in the figure. The flexibility matrix for the assigned co-ordinate system is given as below.
If the supports are uniyielding, find the reaction at support B. in ‘kN’ correct upto one decimal place.
Solution
For the primary structure, let us remove the redundants RB & RC.
https://iesmaster.org/onlinetestseries/tm/studentpanel/page.php?page=report&view=test_report&test_id=167 23/29
7/29/2019 Student Test Report | TestMent
Now, from flexibility matrix concepts,
On solving =
Unseen
Your Ans
Time (Secs) 0
Bookmark
Q.56
A seepage flow condition is shown in the figure The saturated unit wt. of soil is 20 kN/m3, the effective stress at section x-x is ________ (kPa). (Answer
correct upto two decimal places)
Solution
At x – x
10 × 1 + 20 × 3 = 70 kPa
i=
hxx= i · Lx
= 0.5 × 1 = 0.5 m
hp= (4 + 1 + 2 – 1) – hxx
= 6 – 0.5 = 5.5 m
u= = 10 × 5.5 = 55 kPa
= – u = 70 – 55 = 15 kPa
Unseen
Your Ans
Time (Secs) 0
Bookmark
Q.57
A 6m thick sand layer overlies a 4m thick layer of clay below which is a another sand layer. For the clay, mv = 10–3 m2/kN and Cv = 0.1 cm2/sec. The water
table is at the ground surface but is to be lowered permanently by 4m over a period of 6 months. Assuming no change in the weight of sand, the ultimate
settlement (in cm correct upto one decimal place) due to the consolidation of clay will be.
Solution
https://iesmaster.org/onlinetestseries/tm/studentpanel/page.php?page=report&view=test_report&test_id=167 24/29
7/29/2019 Student Test Report | TestMent
Let the unit weight of sand and clay be and respectively effective stress at the middle be clay layer.
when water table is lowered by 4m. Effective stress at the middle of clay layer.
= = 0.15696 m = 15.7 cm
Unseen
Your Ans
Time (Secs) 0
Bookmark
Q.58
A pipe carrying water has an average height of roughness of 0.48 mm. The diameter of the pipe is 0.68 m and its length is 4.5 m. Discharge of the water is
0.6 m3/sec. The power required to maintain the flow in the in the pipe is _________ W. . Assume pipe to be rough.
Solution
Hf =
V= = 1.653 m/sec
Hf =
Hf = 0.0166 m
P=
Unseen
Your Ans
Time (Secs) 0
https://iesmaster.org/onlinetestseries/tm/studentpanel/page.php?page=report&view=test_report&test_id=167 25/29
7/29/2019 Student Test Report | TestMent
Bookmark
Q.59
The discharge through the compound pipe neglecting minor losses if the friction factor is 0.02 is __________________ ltr/sec. (Answer correct upto one
decimal place)
Solution
Hf =
16 =
By solving
Unseen
Your Ans
Time (Secs) 0
Bookmark
Q.60
Consider a fully developed steady laminar flow of aincompresible fluid with viscosity µ through a circular pipe of radius ‘R’. Given that the velocity at a radial
distance of from the centre line of pipe is V1, the shear stress at the wall is . The value as ‘k’ will be ______. (Answer upto two decimal place)
Solution
u=
Where u is the velocity through the pipe at a radial distance ‘r’ from the centre as the pipe having radius ‘R’.
Givenu=V1 at r =
V1=
V1=
Unseen
Your Ans
https://iesmaster.org/onlinetestseries/tm/studentpanel/page.php?page=report&view=test_report&test_id=167 26/29
7/29/2019 Student Test Report | TestMent
Time (Secs) 0
Bookmark
Q.61
In a 4 m wide rectangular channel water flows at a rate of 6.4 m3/s at the depth of 0.28 m. Due to formation of the hydraulic jump the loss of specific energy
(in cm, correct upto one decimal place) will be
Solution
F1 =
y2 = = 1.23m
So
= 0.622m
= 62.2 cm
Unseen
Your Ans
Time (Secs) 0
Bookmark
Q.62
A triangular open channel of a side slope is 1V : 0.8H carries a discharge of 8m3/sec. The minimum specific energy of the flow is ______ m.(Answer correct
upto one decimal place).
Solution
We know that for minimum specific energy flow should be critical. For Triangular section the critical depth of flow
Q discharge in channel
M side slope
= 1.83 +
= 2.284m
Unseen
Your Ans
Time (Secs) 0
https://iesmaster.org/onlinetestseries/tm/studentpanel/page.php?page=report&view=test_report&test_id=167 27/29
7/29/2019 Student Test Report | TestMent
Bookmark
Q.63
The moisture holding capacity of a soil in a 38 hectares cultivated land is 16 cm/m. When the moisture depletion reaches 50% of available moisture content,
then the irrigation water supplied by a pump working for 8 hours a day is ______.
If water application efficiency is 65%, then the capacity of irrigation system required to irrigate crop (in lps, correct upto one decimal place) will be.
Solution
Allowable depletion =
FIR= = 12.30 cm
= = 46740m3
Unseen
Your Ans
Time (Secs) 0
Bookmark
Q.64
Find the reinforcement at tension face (in cm2 correct upto two decimal place) required for a doubly reinforced beam section to the following particulars.
effective cover = 50 mm
Use M20 concrete and Fe 415 steel, and fsc = 352 MPa
Solution
= 172.5 × 106Nmm
Mu> Mu,lim
Ast, lim=
Asc=
Unseen
Your Ans
https://iesmaster.org/onlinetestseries/tm/studentpanel/page.php?page=report&view=test_report&test_id=167 28/29
7/29/2019 Student Test Report | TestMent
Time (Secs) 0
Bookmark
Q.65
The BMD of a loaded beam is shown in figure. The beam ABCD is supported at B and C. The maximum shear force in the beam will be ________ kN.
{Answer correct upto one decimal place}
Given : AB = EF = FC = CD = 4m and BE = 2m
Be = 2m
Solution
Loading diagram
Maximum SF = 12 kN
Unseen
Your Ans
Time (Secs) 0
Bookmark
https://iesmaster.org/onlinetestseries/tm/studentpanel/page.php?page=report&view=test_report&test_id=167 29/29