Professional Documents
Culture Documents
Harfo: HL10 Series USER MANUAL
Harfo: HL10 Series USER MANUAL
All products purchased from our company are guaranteed to keep in good for 1 year.
If problems happen in guarantee period, not need to return it. Contact us and our
company will solve it for free. Additionally, our company providet technical support
and fittings for life. After-sales service isn't restricted by time and we will assign
technical personnel to solve your problems immediately after receiving your email.
Please contact us before returning the lock. We are here to help you!
E-mail: harfoseller@hotmail.com
Please mind the drill bit.
Avoid hurting yourself and the lock
Catalogue
I. Introduction
1.Overview..............................................................................................1
2.Installation diagram.............................................................................1
4.Install batteries....................................................................................4
5.Backup key..........................................................................................4
7.Technical parameter.............................................................................5
Ⅲ.Others.................................................................................................9
Password memo.....................................................................................10
I. Introduction
1.Overview
1.Outer handle 2. Outer lock 3.Data line 4.Latch 5.Screws 6.Square shaft
7.Metal plate 8.Strike plate 9.Bottom case 10. Inner lock 11.Battery
2.Installation diagram
Visit our Amazon store for installation videos(www.amazon.com/harfo),
or search “HARFO HL10” on YouTube.
1
2.2 Installation of the latch and strike plate
1.Adjust the length of latch to match the
hole size(60mm or 70mm).
2
2.4 Installation of the inner lock
3
4.Install batteries
Install 4pcs AA batteries and notice the
dirction of the positive and negative electrode.
Put the battery cover back after finish the
installation and tighten the screw.
5.Backup key
If the battery died or you forget the password, please use the backup key.
Remove the hex socket screw on the handle by L wrench remove the
outer handle insert the key and turn 90°clockwise, the door will open.
4
6.Test after installation
7. Technical parameter
Battery type 4pcs 1.5v AA batteries
Working temperature:-10~70℃
Environment
Humidity:0%~95%
Center Distance 60mm or 70mm (2-3/4” or 2-3/8”)
Door thickness 38-53mm / 1.5”-2.1”
Initial Password 00888888
All kinds of screws and sping have 1 more to replace.
5
II.Operation instruction
Add the administrator Lock status
password
6
Add the normal user Lock status
password
NOTE:If you want to change password, just delete it and add a new one.
7
Restore factory settings Lock status
(Erase all code)
Remove 1 battery, press the The blue light will flash.You will
Erase button and hold on for 5 hear a long “di” (If you hear a
sec, then install the last battery. short “di,di” sound, it’s failure)
Unlock the door by password, You will hear a long “di”, and
then press 0~9 any number the blue light will flash every 4
button. sec.
8
Ⅲ.Others
1.Open the door by password
Input xx(group number) + xxxxxx(6 digital code) + Green button(Enter),the
door will open. After 5 sec the door lock will lock again.
For security, you can add any number before or after the correct password
when you unlock it.
9
Password Memo
00 Admin
01 Admin
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
10
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
11