The document is a G-code program for machining a part using pocketing operations with a 5mm end mill. It describes toolpaths to cut out several pocket shapes of varying sizes in multiple locations of a material that is 2000mm x 3000mm x 20mm. The program lists the toolpaths and tools used and provides the G-code instructions to move and cut along specified toolpaths at defined feed rates and depths.
The document is a G-code program for machining a part using pocketing operations with a 5mm end mill. It describes toolpaths to cut out several pocket shapes of varying sizes in multiple locations of a material that is 2000mm x 3000mm x 20mm. The program lists the toolpaths and tools used and provides the G-code instructions to move and cut along specified toolpaths at defined feed rates and depths.
The document is a G-code program for machining a part using pocketing operations with a 5mm end mill. It describes toolpaths to cut out several pocket shapes of varying sizes in multiple locations of a material that is 2000mm x 3000mm x 20mm. The program lists the toolpaths and tools used and provides the G-code instructions to move and cut along specified toolpaths at defined feed rates and depths.
The document is a G-code program for machining a part using pocketing operations with a 5mm end mill. It describes toolpaths to cut out several pocket shapes of varying sizes in multiple locations of a material that is 2000mm x 3000mm x 20mm. The program lists the toolpaths and tools used and provides the G-code instructions to move and cut along specified toolpaths at defined feed rates and depths.