Professional Documents
Culture Documents
Calibration Test Bench
Calibration Test Bench
Via Marconi, 8
20020 Arese (MI) • Italy
Cod. Fisc. e P. IVA 00842470155
CALIBRATION DIVISION
LED LED
Measuring section
Hart Configurator
Empty
All electric and pneumatic connections are fully protected; all metal
parts are provided with earth strap connection points.
All metallic parts are degreased, phosphatized and dried at 110 °C.
Coated with epoxy powder paint, oven baked at 180 °C. Covering
thickness is 50/60μ minimum.
The worktable is constructed from high density board, thickness 30 mm, and finished with matt non reflective grey plastic laminate.
The work surface with rounded front edge is mounted onto a 70 mm high steel sub-frame. The front of the sub-frame has rectangular holes for the
insertion of electrical sockets.
2.1 ZES 01-VE MAIN POWER SUPPLY WITH EMERGENCY PUSH BUTTON MODULE
Module is designed for power supply mains switch with a differential earth leakage breaker.
Module usually placed at the right or left support of holder/console side test benches. Complete with emergency push button.
- Power supply 120 V a.c. ± 10 %, 50 ÷ 60 Hz
- Emergency push button type: Totally switch off
- Automatic Magneto thermic Switch: 16 or 32 A
- Connection Cable: stripped wire or female connection
Front Panel
STANDARD SUPPLY
PRESSURE MODULE
► GENERAL SPECIFICATIONS
CODE VPE 01
OUTPUT RANGE Up to 5 mbar abs
SOURCE Vacuum pump
POWER SUPPLY 120 Vac 60 Hz 1Ph
► GENERAL SPECIFICATIONS
CODE 08
OUTPUT RANGE MAX 1500 psig (100 barg)
SOURCE EXTERNAL
STANDARD SUPPLY
► GENERAL SPECIFICATIONS
CODE 06
OUTPUT RANGE MAX 300 psig (20 barg)
SOURCE EXTERNAL
STANDARD SUPPLY
2 PLUG-IN mail
► GENERAL SPECIFICATIONS
CODE VPG 400
SENSIVITY 0,001 mbar
OUTPUT RANGE -400 … 400 mbar
SOURCE AMBIENT
STANDARD SUPPLY
mt. 1,5 Neutral Rilsan hose Ø6 mm
2 PLUG-IN MALE
http://www.wika.co.uk/upload/DS_CT1801_en_co_45512.pdf?tabPage=2
13 5/08/2016 012JOGI16 (QUO0046149) 13.1
CALIBRATION DIVISION
TEMPERATURE MODULE
http://www.wika.co.uk/upload/DS_CT1801_en_co_45512.pdf?tabPage=2
15 5/08/2016 012JOGI16 (QUO00046149) 14.1
7. TEMPERATURE GENERATION
7.1 COMPACT DRYBLOC AND MICROBATH CTM9100 - 150 °C
The temperature multi-function calibrator combines four application possibilities in one instrument. The simple instrument design enables fast and
simple switching, back and forth, between individual applications. Changing between the four possibilities can be made very easily using one of the
four keys and the toggle switch on the front. It is possible to calibrate nearly every thermometer with the different inserts, even contact (TC, Pt,
surface) or non-contact (infrared) thermometers.
The CTT series are particularly recommended to all Calibration Laboratories and to any Maintenance Service Company engaged with demanding
testing procedures, by comparison method. Being a reference sensor CTT become the master for any industrial temperature instrumentation
ADDITIONAL
Comprises:
T005 33 776 99 WR 2 Power unit, 300 W
T005 29 180 99 WP 80 Soldering iron 80 W fitted with LTB soldering tip
T005 15 152 99 WDH 10T Safety rest with Stop & Go function
T005 13 190 99 DSX 80 Desoldering iron 80 W / 24 V fitted with DSX 113HM desoldering nozzle
T005 15 152 99 WDH 30 Safety rest, Power cable, Equipotential bonding
T005 13 171 99 WTA 50 Tweezers smd desoldering
T005 27 118 99 WDH 30 Hot air set safety rest
T005 15 158 99 WDH 31 SUPPORT FOR WP / WXP 200
DOCUMENTATION
CHAMBER OF COMMERCE
Witnessed test: On costumer account. To be requested when ordering. Max 1 day, for
additional days will be invoiced an additional amount T.B.A.
Included documentation: MANUAL – SOFT COPY
MANUAL – HARD COPY
ALL INSTRUMENT MANUAL SOFT OR HARD COPY
CE CERTIFICATE (Where required)
TEST REPORT
For any additional document not mentioned in this quotation, we reserve the right to evaluate the possibility to supply it and to
invoiced the cost on costumer account