Professional Documents
Culture Documents
Ericsson Parameter Audit Capacitymanagement
Ericsson Parameter Audit Capacitymanagement
Ericsson Parameter Audit Capacitymanagement
MV Project
Ericsson Network
CAPACITY MANAGEMENT
Huawei NPM Delivery Team
26 June 2012 www.huawei.com
If the value of the maximumTransmissionPower parameter is set to a value higher than the value of the
maxDlPowerCapability parameter, the actual maximum power is still equal to the value of the
maxDlPowerCapability parameter.
Since Power Admission and Congestion Resolving Actions are BLOCKED , In Case of Power Congestions
(HIDDEN) SOHO Success Rate Decreases due to Radio Link Addition Failures
Service RABs might have drops due to little power remained for services.
primaryCpichPower was set to 1 Watt by default. For some Utrancells, due to Transmission Network
limitations and overshooting issues, has been decreased.
For 177 Utrancells, primaryCpichPower might be increased from 1.01 Watt to 0.04 Watt range
For Better COVERAGE and To See REAL CAPACITY REQUIREMENTS, It is recommended to utilize the
available range especially for Urban Utrancells.
This step will provide us to see the real necessities for NodeBs for capacity Upgrade (CE & Power)
primaryCpichPower was set to 1 Watt by default. For some Utrancells, due to Transmission Network
limitations and overshooting issues, has been decreased.
For 177 Utrancells, primaryCpichPower might be increased from 1.01 Watt to 0.04 Watt range
For Better COVERAGE and To See REAL CAPACITY REQUIREMENTS, It is recommended to utilize the
available range especially for Urban Utrancells.
This step will provide us to see the real necessities for NodeBs for capacity Upgrade (CE & Power)