Download as pdf
Download as pdf
You are on page 1of 6
~ Date Rap Q@ ALGOTECH (M) SDN BHI Rev. No.: 00 age: ofS MECHANICAL, INSTALLATION, PIPING,INSULATION AND PAINTING ( INCLUSIVE OF CIVIL AND BUILDING FOR OFFICE | BUILDING AND SUBSTATION ) METHOD STATEMENT INSTALLATION OFFICE CABIN AT TECHNIP TEMPORARY SITE FACILITIES Doc No.: Technip - 00 - CM - MOS ~ 001 Rev |Date | Status ‘ALGOTECH (M) SDN BHD | TECHNIP Prepared | Checked | Endorsed | Approved By ®y °y 8y 00 | 32/4/2013 | For Approval 35h y |< Dara ‘Appr a Ca AN [al METHOD OF STATEMENT ‘Temporary Sta Facies on Techni ea CONTENTS » 2 3 4 5 6 SCOPE WORK SEQUENCE MATERIAL MANPOWER EQUIPMENT. HEALTH, SAFETY AND ENVIRONMENT Page 2 0F6 Brsscs METHOD OF STATEMENT (Verte ew “Temporary Ste Facies on Techni ea " 1.0. SCOPE ‘This method statement is applicable for the installation of temporary site facilities and laydown, area on Technip Area. “The scope of works include 42) Setting of site facilites as follows: iL Office cabin 20'x 10" Portable Toilet 20 WORK SEQUENCE 2) Site Facies Installation 2.1.1 All cabins (storage and office cabin) shall be transported by taller, 2.1.2 Crane inspection and ting gear checking bya ajctesn aud Taclen: p * 2.13 Crane parking and open outrigger. 2.14 Cabin area demarcation 2.1.5 Unload cabins to designated area using 20t crane / Boomtruck. 2.1.6 Cabin to be level. od, ) Power supply dy reatey “a 2.9.1 Power kt be provided using 2 SOkVA Generator 2.92 Generators tobe inspected ona daily basis 2.93 Ensure that acess o cable outings ae fre rom obstructions. 3.0. MATERIAL a. Office cabin b. Gen set Page 30F6 MerWoo oF srareMeNt Bronce 4.0 MANPOWER - Construction Superintendent x 1 pax >. Construction Supervisor x 1 pax Safety Supervisor x 1 pax General Worker x 2 pax . Crane Operator x 1 pax 50 PMENT ‘a. 20k crane / Boomtruck b. Traller 6.0 HEAL AND ENVIi SA te be approved bafare ame \Gting aalivity communis '. Tools Box Meeting to be conducted every morning to brief workers of the dally activites to be carried out and related safety matter. In accordance with safety regulations, safety induction, toolbox meeting must be performed on site prior commencement of any work. The risk assessment ‘during activities shall be clearly explained to all personnel who are involved in forder to avoid any injury and damage to personnel, exéting utlities and facilities as well as the environment, Page 4 0F6 Uer#00 OF STATEMENT Bocsnsnne toon Temporary Feces on Techie Wea Temwoomncon, Page 5 0F6 ii INS 7 in

You might also like