Professional Documents
Culture Documents
Coromandel
Coromandel
INTERNATIONAL LIMITED
VISAKHAPATNAM
This project is submitted in partial fulfilment for the completion of Master of Business Administration (MBA) from Manipur Institute of Management Studies (MIMS), Manipur University
Submitted by
1|Page
I ereby declare t at t is pr ject rep rt INVENTOR M NAGEMENT wit reference t COROMANDEL INTERNATIONAL LIMITED as been prepared by me during t e peri d 06-06-2011 t 21-07-2011 is fulfilment f t e requirement for t e award of degree of Master of Business Administration of Manipur University, Manipur
I also declare t at t is project is a result of my own effort and t at it as not been submitted to any ot er university for t e Award of Any Degree.
Place:
Date:
VISAKHAPATNAM
Ma pur c
ue
ma ageme
u e
Declarati n
2|Page
A successful project can never be prepared by single effort or t e person to w om t e project is assigned, but it also demand t e elp and guardians ip of some conversant persons w o elps in t e undersigned actively or passively in t e completion of successful project. it great pleasure, I express my deep sense gratitude to t e management of COROMANDEL INTERNATIONAL LIMITED Visak apatnam for giving me t is very inspirational opportunity to do my observation study in t eir reputed company to take t is opportunity to express my deep and profound gratitude to t e people concerned w o ave elpe d me directly or indirectly in successful completion of t is project. I convey my sincere t anks to Mr. CH. V.S.R. SANJEEVA RAO, Manager Accounts w o as motivated me t eir valuable suggestion and elped t roug out t e project in permitting to perform various tasks in t is esteemed organization. I owe my sincere t anks to B.Kishore Kumar , Training Department HRManager and for t is kind approval for t is project. I would like to extend my special t anks to Dr. W. Chandbabu Singh, Summer training and placement advisor, MIMS for providing me t e guidance and support during my training period. I would also like to t ank t ose entire people w ose co-operations, suggestions and eartfelt support paved my way to accomplis and make my project successful.
Ma pur c
ue
ma ageme
ACKNOWLEDGEMENT
u e
3|Page
T is is to certify t at MR. KABRAMBAM MONORANJAN SINGH, a bonafide student of Management Studies, Manipur Institute of Management Studies, Manipur as carried out t e project work and prepared t e project report entitled A STUDY ON INVENTORY MANAGEMENT wit reference to COROMANDEL INTERNATIONAL LIMITED, VISAKHAPTNAM in partial fulfilment for t e award of t e degree of MASTER OF BUSINESS ADMINISTRATION under my guidance.
Date: Place:
Ma pur c
ue
ma ageme
u e
CERTIFICATE
4|Page
CHAPTER-I
INTRODUCTION
1.1CONCEPT OF FINANCE 1.2 INTRODUCTION TO INVENTORY MANAGEMENT 1.3 OBJECTIVES OF THE STUDY 1.4 PURPOSE OF THE STUDY 1.5 SCOPE OF THE STUDY 1.6 METHODOLOGY 1.7 LIMITATIONS
2.1 INTRODUCTION TO FERTILIZER INDUSTRY 2.2 ORGIN AND DEVELOPEMENT OF FERTILIZERS INDUSTRY IN INDIA 2.3 MAJOR SEGMENTS IN FERTILIZERS 2.4 DEMAND AND SUPPLY 2.5 INCREASES IN FERTILIZER PRODUCTION 2.6 PRICING POLICY 2.7 FERTILIZER SUBSIDY
Ma pur c
ue
ma ageme
# "' $# $!
"!
u e
CONTENTS Pg.No.
1 -5
6-14
5|Page
CHAPTER-III COMPANY PROFILE 3.1 INTRODUCTION 3.2 HISTORY 3.3 MANAGEMENT TEAM 3.4 GROUP COMPANIES 3.5 INTERNATIONAL ALLIANCES 3.6 INTRODUCTION TO CIL 3.7 OBJECTIVE OF CIL 3.8 CIL VISION, MISSION, POLICIES 3.9 VALUES AND BELIEFS 3.10 CILS MAJOR COMPETITORS 3.11 BOARD OF DIRECTORS 3.12 NON-FERTILIZER ACTIVITIES 3.13 PRODUT AND SERVICES 3.14 ACHIVEMENTS OF CIL 3.15 ORGANISATIONAL CHART
CHAPTER-IV
4.1 INTRODUCTION 4.2 ABC ANALYSIS 4.3 EOQ (ECONOMIC ORDER QUANTITY) 4.4 REORDER-POINT 4.5 XYZ ANALYSIS 4.6 VED ANALYSIS
Ma pur c
ue
ma ageme
0 )4 10 1(
32 1 1)10 ()
)(
u e
15-27
28-46
6|Page
4.7 NON-MOVING ITEM ANALYSIS 4.8 INVENTORY MANAGEMENT OF RAW MATERIAL 4.9 INVENTORY MANAGEMENT OF FINISHED GOODS 4.10 PURCHASING SYSTEM
CHAPTER-V DATA ANALYSIS&INTERPRETATION 5.1 ANALYSIS &INTERPRETATION 5.2 ABC ANALYSIS 5.3 CALCULATION OF EOQ FOR 2009-2010 5.4 FIRST IN FIRST OUT
CHAPTER VI SUMMARY OF FINDINGS&SUGGESTION 6.1 FINDINGS 6.2 SUGGESTIONS 6.3 SUMMARY 6.4 BIBLIOGRAPHY
Ma pur c
ue
ma ageme
7 6A 87 85
@9 8 8687 56
65
u e
47-73
74-77
7|Page
CHAPTER-1 INTRODUCTION 1.1 1.2 1.3 1.4 1.5 1.6 1.7 CONCEPT OF FINANCE INTRODUCTION TO INVENTORY MANAGEMENT OBJECTIVES OF THE STUDY PURPOSE OF THE STUDY SCOPE OF THE STUDY METHODOLOGY LIMITATION
Ma pur c
ue
ma ageme
D CH ED EB
GF E ECED BC
CB
u e
8|Page
1.1
CONCEPT OF FINANCE
Financial management is t at managerial activity w ich is concerned with the planning controlling of the firms financial resources. It was a branch of economics till 1890 and as a separate discipline it is of recent origin. Still, it has no unique body of knowledge of its own, and draws heavenly on economics for its theoretical concepts even today. The subject of financial management is of immense interest to both academicians because the subject is still developing and there are still certain areas where controversies exist for which now unanimous solution have been reached as yet. Practicing mangers are interested in this subject because among the most crucial decisions of the firm are those which relate to finance, and an understanding of the theory to make decision skilfully.
Scope of finance
Firms create manufacturing capacities for production of goods: some provide services to customers. They sell their goods or services to earn profit. They raise funds to acquire manufacturing and other facilities. A firm secures whatever capital is needs and employees it in activities, which generate returns on invested capital
Ma pur c
ue
ma ageme
Q PU RQ RI
TS R RPRQ IP
PI
u e
Inventory management is primarily about specifying the size and placement of stocked goods. Inventory management is required at different location within a facility or within multiple location of a supply network to protect the regular and planned course of production against the random disturbance of running out of materials or goods. The scope of inventory management also concern the fine lines between replenishment lead time, carrying costs of inventory, asset management, inventory forecasting, inventory valuation, inventory visibility, future inventory price forecasting, physical inventory, available physical space for inventory, quality management, replenishment, returns and defective goods and demand forecasting. The inventory management process begins as soon as one has started production and ordered raw material, semi finished products or any other thing from a supplier. If you are a retailer, then this process begins as soon you have placed your first order with the wholesaler. Once orders have been placed, there is generally a short period of time available to a firm to put an inventory management plan in place before the suppliers are delivered. Inventory management helps a firm to decide in advance where these supplies should be stored. Inventory constitutes the most significant part of current assets to a large majority of companies in India. On an average inventories are approximately 60% of current assets in public limited companies in India. Because of the large size of inventories maintained by the firms, a considerable amount of funds is required to be committed to them. It is possible for a company to reduce its levels of inventories to a considerable degree e.g., 10-20%, without any adverse effect on production and sales, by using simple inventory planning control techniques. And at the same time company should not invest excess money in inventory by managing large size of inventories. The company may lose the opportunity cost on the excess inventory and also the carrying cost will increase due to large size of inventories. Therefore it is advisable for the company to maintain inventory at an optimum level always. There are different techniques available for the company to maintain optimum level of inventory. As the inventories form a major part in CIL, a study is being carried over on how the inventories are controlled and manage
To find whether the CIL ensures a continuous supply of material to facilitates uninterrupted production. To study the inventory management policies, techniques and their effectiveness. To give suggestion to increase inventory turnover. To give suggestion when inventory is replenished. To make an appropriate investment in inventories and kept it in an optimum level.
Ma pur c
ue
ma ageme
X Wb YX YV
a` Y YWYX VW
WV
u e
10 | P a g e
1.6 METHODOLOGY:
Both primarily and secondary data were used in conducting the project which is as follows:
y
PRIMAR DATA: This is done by personal discussion with various official in warehouse department and financial department of CIL.
SECONDAR DATA: Data collection from the in-house purchase order books and are house. Indent books and journals relating to fertilisers industry magazines and annual report of CIL. The secondary data is also obtained from the annual report and the documents by the company.
1.7
LIMITATION:
The below mentioned are the constraints under which my study has been carried out.
y y y
The study is confined to only 5 years Most of the information has been kept confidential and as passed on as a part of the policy of the company Since the number and size of inventory is very large, all the raw materials could not be included in the analysis
Ma pur c
ue
ma ageme
e di fe fc
hg f fdfe cd
dc
u e
11 | P a g e
Ma pur c
ue
ma ageme
r qv sr sp
ut s sqsr pq
qp
u e
12 | P a g e
Since the essential physiological attribute of seeds is their ability to convert a great duel of nutrients into grain. The spread of this variety lead for greater consumption of fertilizers simultaneously with increasing demographic pressure on the agricultural productivity has assumed more importance. This also contributed to the rising demand for fertilizers.
Agriculture the backbone of Indian Economy still holds its relative importance for more than a billion peoples. The Government Of India from time to time has taken considerable steps for the upliftment of Agriculture Sector. Here we have analyzed the performance of Fertilizer Industry being one of the vital parts in agricultural production and Governments policy initiative for the same
Fertilizer in the agriculture process is an important area of concern. Fertilizer industry in India has succeeded in meeting the demand of all chemical fertilizer in the recent years. The Fertilizer Industry in India started its first manufacturing unit of Single Super Phosphate(SSP) in Ranipet near Chennai with a capacity of 600 MT a year. Then established the first two lagged sized fertilizer plant, one was the Fertilizer & Chemicals Travancore of India Ltd. (FACT) in Cochin, Kerala, and another one was Fertilizer Corporation of India (FCI) ion Sindri, Bihar. These two were established as pedestal fertilizer units to have self sufficiency in the production of food grains. Afterwards, the industry gained impetus in its growth due to green revolution in late sixties, followed by seventies and eighties when fertilizer industry witnessed an incredible boom in the fertilizer production.
Fertilizer consumption of plant nutrients per unit grossed cropped area in India is still very low average being 91.5 kg/ha. Productivity of food grain crops in the country is also quite low, around 1.6t/ha, which can certainly be doubled by enhancing per unit average fertilizer use. Fertilizer consumption has to increase substantially in order to achieve the food grain requirement of 220 million tons by the 2002.
Ma pur c
ue
ma ageme
y x y w
xy wx
xw
u e
13 | P a g e
The sector experienced a faster growth rate and presently India is the third largest fertilizer producer.
Ma pur c
ue
ma ageme
u e
14 | P a g e
Capacity utilization:
The domestic fertilizer industry has attained the level of capacity utilization, which compare favourably with others in the world. The capacity utilization during 2001-02 was 89.6% for Nitrogen and 75.7% for Phosphate. The capacity utilization is estimated at 89.8% for Nitrogen and 81.3% for Phosphate during 2002-03.
Report showed the total installed capacity of fertilizer production in 2004 to be 119.60 LMT of Nitrogen and 53.60 LMT of Phosphate. These figures went up to 120.61 LMT of Nitrogen and 56.59 LMT of Phosphate in 2007. The production of fertilizer was 113.54 LMT of Nitrogen and 42.21 LMT of Phosphate during 2005-06. The target of production for 2006-07 was set at 114.48 LMT of Nitrogen and 48.20 LMT of Phosphate. Though the target production was not met, there was a growth in production during 2006-07 as compared to the production during 2005-06.
Indian fertilizer industry has reached international levels of capacity utilization by adopting various strategies for increasing the production of fertilizer. These include the following:
y y y y
Expansion and increase in efficiency through modernisation and revamping of existing fertilizer units. Reviving some of the closed fertilizer plants. Using alternative source, such as coal or liquefied natural gas for the production of fertilizers, especially area. Establishing joint venture projects with companies in countries that abound in cheaper resources of raw materials. In order to meet the demand for gas, which is one of the prime requirements for the production of nitrogenous fertilizers, India has entered into joint ventures with foreign companies in a number of countries. Joint ventures have also been established for the supply of phosphoric acid. Indian fertilizer manufacturing companies has joined hands with companies in Senegal, Oman, Jordan, Morocco, Egypt, Tunisia and other countries. It is, therefore, evident that the Indian fertilizer industry has witnessed extensive growth and development in a short span of time. ith such extensive growth, it is not surprising that the India ranks among the leading fertilizer manufacturing countries of the world.
Ma pur c
ue
ma ageme
u e
15 | P a g e
The Indian fertilizer industry is broadly into Nitrogenous, Phosphatic and Potassic segment. In addition to these, nutrients are combined to produce several complex fertilizers. To express the nutrient constituents of fertilizer, the grade of a fertilizer is expressed as a set of three numbers in the order of percent of Nitrogen (N), Phosphate (P), and Potash (K). The straight nitrogenous fertilizer produced in the country is urea, ammonium sulphate, calcium ammonium nitrate (CAN) and ammonium chloride. The only straight phosphate fertilizer being produced in sector report: fertilizer Industry India/Economics the country is SSP. The complex fertilizer include DAP, several grades of nitro phosphates and NPK complexes. Urea and DAP are the main fertilizer produced indigenously.
Ma pur c
ue
ma ageme
d h ed e
gf e eed
u e
16 | P a g e
Nitrogenous fertilisers
Phosphatic fertilisers
-Ammonium sulphate -Single super phosphate -Ammonium chloride -Calcium ammonium nitrate -Urea (SSP)
Ma pur c
ue
ma ageme
k jo lk li
nm l ljlk ij
ji
u e
Fertilizers
Potassic fertilisers
Complex fertilisers
-Ammonium phosphate sulphate -Diammonium phosphate (DAP) -Nitro phosphate -Ammonium nitrate phosphate -Urea ammonium phosphate -NPK fertilisers
17 | P a g e
Today, India stands as the third largest fertiliser consumer and producer of the world. It has been observed that the subsidies on Indian fertiliser have been rising at constant rate. This is due to the rise in the cost of production and inability of the government to raise the maximum retail price of the fertilisers. The population of the country is rapidly increasing at 1.5% annually. This requires higher production of food grains. The total cropped area is only 30% of the net geographical area, which is not enough for increasing the agricultural productivity. Now, the main focus is on the improvement of the farm income, for which the fertiliser industry needs to lay more stress on the agricultural activities in the country. This will also help to improve terms between the government agencies and the fertilisers industry in India.
Ma pur c
ue
ma ageme
r qv sr sp
ut s sqsr pq
qp
u e
18 | P a g e
90 85 80 75 70 65 60 55 50 45 40
Ma pur c
ue
ma ageme
y x} zy zw
|{ z zxzy wx
xw
u e
Production along with escalation in price of raw material and plant cost, the subsidy amount swelled to huge proportions over the years. In an attempt to reduce the burden of subsidy, the government has increased urea price by 10% w.e.f February 2005. As a result, domestic urea prices have risen from Rs 3320/t (US$ /t) to Rs 3660/t (US$ 91/t) for bagged deliveries to farmers. The average subsidy pattern of urea is around US$84/t. prior to decontrol of phosphatic and potassic fertilizer (in the year 1992) subsidy was available to all domestic and imported fertilizers. The fertilizer subsidy increased from US$ 418 million in 1999-00 to US$ 2446 million in 2042005. However, the subsidy bill after the de3dcontrol of phosphatic and potassic fertilizer declined and remained below 1990-91 level.
The union budget for 2000-01 raised urea raised by 15 percent, DAP by 7 percent and that of MOP by 15 %. This move enabled the Government of India to prune the subsidy bill to some extent. However, there was no increase in urea price in the union budget for 2001-02.
In the long term policy, the subsidy withdrawal in a phased manner has been proposed. However, modalities to phase out the subsidy have not been clearly mentioned.
Ma pur c
ue
ma ageme
~
~
~
u e
20 | P a g e
3.1 INTRODUCTION 3.2 HISTORY 3.3 MANAGEMENT TEAM 3.4 GROUP COMPANIES 3.5 INTERNATIONAL ALLIANCES 3.6 INTRODUCTION TO CIL 3.7 OBJECTIVE OF CIL 3.8 CIL VISION, MISSION, POLICIES 3.9 VALUES AND BELIEF 3.10 CILS MAJOR COMPETITORS 3.11 BOARD OF DIRECTOR 3.12 NON-FERTILIZER ACTIVITIES 3.13 PRODUTS AND SERVICES 3.14 ACHIVEMENTS OF CIL 3.15 ORGANISATIONAL CHART
Ma pur c
ue
ma ageme
u e
21 | P a g e
3.1 INTRODUCTION:
Headquartered in Chennai, the Rs 15,907 cores (US$ 3.14 billion) Murugappa Group is one of Indias leading conglomerates. Market leader in diverse areas of business including Engineering, Abrasives, Finance, General Insurance, Cycles, Sugar, Farm Inputs, Fertilizer, Plantation, Bio-products and Nutraceuticals, its 29 companies have manufacturing facilities spread across 13 states of Indie. The organisation fosters an environment of professionalism and has a workforce of over 32,000 employees. The Group has forged strong joint venture alliance with leading international companies like DBS Bank, Mitsui Sumitomo, Foskor, Cargill and Groupe Chimique Tunisien has consolidated its status as one of the fastest growing diversified business houses in India. The group stated in early 20th century at Tiruvottriyur, Chennai in association with present-day (Carborundum Universal Ltd.), with the name Ajax India Ltd., as a hardware manufacturer
3.2 HISTORY :
The business has its origin in 1990, when Dewan Bahadur A M Murugappa Chettiar established a money-lending and banking business in Burma (now Myanmar), which then spread to Malaysia, Sri Lanka, Indonesia and Vietnam. In these 100-plus years, it has withstood enormous vicissitudes, including strategically moving its asset back to India and restarting from scratch in the 30s, before the Japanese invasion of Burma in World War II. Starting with a sandpaper plant, the Group forayed into making steel safes, and then into manufacturing. It set up an insurance company, and bought a rubber plantation; making a small but significant beginning. The rest is history. The company crossed the USD 1 billion mark in 2003-04, with an impressive growth of 25% over Rs4206 crore in 2002-03, and a 40% jump in profit before tax over the previous year. Today, it is one of the countrys biggest industrial houses. Consolidated Group turnover for 200405 crossed USD 1.44 billion, a growth of 20% over the previous year. In 2005-06, combined turnover increased by 17% to USD 1630 million (Rs 7340 crore) and net profit (PBT) by 45% to USD 177 million (Rs 800 crore). The Group ended the year 2006-07 with a turnover of Rs 8,446 crore, and profit before tax of Rs 649 crore. The year 2007-08 saw a turnover of USD 2.4 billion (Rs9 852 crore) and has the group well on its way to achieving its vision of becoming a USD 4 billion conglomerate by2010.
Ma pur c
ue
ma ageme
u e
22 | P a g e
Name
V. Ravichandran P. Naga Rajan
G. Ravi Prasad
S. Govindaranjan
3.4 GROUP OF COMPANIES: Carborundum Universal Ltd (CUMI) :Ccarborundum Universal Ltd
(CUMI) pioneered the manufacture of coated and bonded abrasives in India, besides super refractories, elrctrominerals, industrial ceramics and ceramic fibres. CUMI is an industrial ceramic material-based product and service provider with operations spread across three businees segments such as abrasives, ceramic and electrochemicals.
Ma pur c
ue
ma ageme
u e
Designation
Managing Director Chief Financial Officer Sr Vice President-Sales and Marketing (fertilizer) Sr Vice President-Retail Sr Vice President-Commercial Sr Vice President-Pesticides SBU Sr Vice President and Head of HR Sr Vice President Manufacturing and Head of
23 | P a g e
Cholamanadalam DBS Finance Limited, a pan Indian company is a joint venture between the Murugappa Group and DBS Bank of Singapore. The company offers vehicle finance, corporate finance, capital market finance, capital market finance and fixed deposit.
Cholamandalam MS General Insurance Company Ltd is a joint venture between the Murugappa Group and the Mitsui Sumitomo Insurance Group of Japan. The company is in the business of non-life and general insurance; home; motor; health, travel, shop and office insurance for the individual, as well as marine, Liability, engineering and fire insurance for the corporate customer. Coromandel International Limited, a constituent of the Murugappa Group, is a leading manufacturer of a wide range of fertilizer and pesticides.
The company produces high analysis fertilizer and broadband pesticides hat can be used across various crops. EID Party is a pioneer in the manufacture of plantation white sugar from sugarcane. The company has five (5) fully equipped plants in the country.
EID Party:
The company manufactures and markets a wide range of agri products such as sugar, bio product and micro algal health supplements. Parry Agro is in the business of tea and coffee plantations and is one of the leading producers of tea in the country.
Parry Agro:
Apart from tea and coffee, the company has interest in other plantation crops. It grows vanilla, as well as grows and processes rubber.
Tube Investment of India: Tube Investment of India Ltd is a pioneer and market leader
in high-end cold0drawn welded (CDW) tubes. TI also enjoys a sizeable share of the Indaian auoyo market. TI Cycles, Tube Products of India (TPI), TIDC India and TI Metal Forming are the business division of TII.
Ma pur c
ue
ma ageme
u e
24 | P a g e
Ma pur c
ue
ma ageme
u e
25 | P a g e
Ma pur c
ue
ma ageme
u e
COMPANY PROFILE
Mission :
To enhance the property of farmer through the supply of quality farm inputs and related services to ensure value for money.
Policies :
Quality Control:
y
y y
CIL are committed to supply phosphate fertilzers and related produts with safety requirements of customers and comply with application specifications. Further they are committed to continual improvement of the quality management system and the process with the objective of improving the product quality CIL will strive to achieve the quality objective and customers satisfaction by:Developing Implementing maintaining quality management system to International standards.
Imparting requistes knowledge, skills and competency through employees and the ensuring employees participation in continuos improvement measures. Safety Policy: y It is the policy of Coromandel International Ltd to conduct its activites in a amnner which ensure the healthy work environment and the safety of its employees. y At all Coromandel location local management has the responsibility to ensure that all processes that equipment and facilities and designed, constructed, operated and the maintained in asafe national state and local government regulation cost consideration or demands of product and the operation must not allowed shadow safety consideration.
Ma pur c
ue
ma ageme
u e
27 | P a g e
Adhere to ethical norms in all dealing with share holders, employees, customers, suppliers, financial institutions and government. Provide value for money to customers through quality products and services. Manage environment effectively for harnessing opportunities Discharge responsibilities to various sections and preserve environment. Grow in an accelerated manner consistent with values and belief by continuous organisational renewal. Maintain an organization climate conductive to trust, open communication and term sprit and style operation befitting our size, but reflecting moderation and humility.
Ma pur c
ue
ma ageme
It is the obligation of every employee to KNOW and FOLLOW our safety rules and regulation. TEACH what we know to others WARN other of unsafe conditions React positively to emergencyn situations REPORT promptly hazardous or unsafe practices and the conditio to Concerned departmentment head PROJECT company properly from loss or accidents PROTECT company properly from loss or accidents Fellow employees and the neighbouring community.
u e
28 | P a g e
Name
A.Vellayan
K.Balasubramanian
R A Savoor
M K Tandon
D E Udawadia
Ranjana Kumar
V. Ravichandran
Ma pur c
ue
ma ageme
u e
Designation
Chairman
Director
Director
Director
Director
Managing Director
29 | P a g e
Sale of intermediates such as Sulphuric acid, Phosphoric acid and Hydrofluoric acid. Sale of fertilizers raw material such as spur, rock phosphate, potash etc Sale of by-products such as vizag gypsum and carbon dioxide. Handling of other cargo at our berth.
Gromor 28:28:0 y Complex with highest N&P in 1:1 y Unique granulation by coating prilled urea with ammonium phosphate layer y Such granule configuration ensures efficient utilization of nutrients. y Highly suitable for paddy, wheat.
Gromor 20:20:0:13 y A high analysis complex Fertilizer containing all the three major nutrients Nitrogen, Phosphate and Potash, was launched by Coromandel in March 2003. y This complex contains Phosphate and Potash in the ratio of 1:1, the highest among the NPK fertilizers.
Paramfos 16:20:0:13
y y
Ammonium phosphate sulphate containing Nitrogen, Phosphate and sulphur It is the most preferred Fertilizer in drill-sown areas
Ma pur c
ue
ma ageme
u e
30 | P a g e
Parry Gold y Ammonium Phosphate Sulphate containing Nitrogen and Phosphate in 1:1 ratio. y It is an ideal Fertilizer for all crops grown in Sulphur deficient soils.
Parry Super (Single Super Phosphate) y First chemical Fertilizer to be manufactured in India. y Favoured Fertilizer for dry land areas. y Controls acidity in soil and increase productivity.
DAP
y
GODAVARI DAP (NP 18:46) is a complex fertilizer containing nutrients Nitrogen and Phosphorus.
10:26:26
y
Godavari 10:26:26 is a high analysis complex fertilizer containing all the three major plant nutrients viz Nitrogen, Phosphate and Potash Godavari 10:296:26 contains phosphate and potash in the ratio of 1:1
12:32:16
y
Godavari 12:32:16 is a complex fertilizer containing all three major plant nutrients viz. Nitrogen, Phosphate and Potash
14:35:14
y
Godavari 14:35:14 is a complex fertilizer containing all three major plant nutrients viz. Nitrogen, Phosphate and Potash. This is the only complex having highest total nutrient content among all the NPK complex fertilizer (63%).
Ma pur c
ue
ma ageme
u e
ISO 9001 certified received for quality management system. FAI award for improvement in overall performance for the year 2004-2005. y The FAI Best Production Performance Award-2006 for the Phosphoric Acid Plant at Vizag. y Award for 2005-06 Best Energy Conservation in the Fertilizer sector received by Vizag Plant on December 14, 2006 National Energy Conservation Day. y The FAI Best Video Film Award-2006 for the film on Gromor Sulphur for the 5th time. y National Award (1st Prize) for House Journal-2006 from The Public Relations Society of India, New Delhi, received for The Voice (house journal) for the 2nd consecutive year y National Award (2nd Prize) for Video Film- 2006 from The Public Relations Society of India , New Delhi received by Marketing Department (Fertilizer) for the film Cheyutha (Helping Hand) y British Council Five Star rating for Safety Management System in 1998. y First Prize for safety, among the 162 fertilizer companies in the International Fertilizer Industries Sectional Contest. y Andhra Pradesh Pollution Control Boards award for Waste minimisation at Source and Adopting Cleaner Technologies for 2001-02. y FAI award for Environment Protection in NP/NPK Fertilizer Plant Category for 1995-96. y Adjudged one of the Ten Greenest Companies in India by a joint survey of Tata Energy Research Institute and Business Today magazine. y Several other awards from the central and state Government and other institution like AP Pollution Control Board. Jawaharlal Nehru Award for Pollution Control and Energy Conservation. y Received a Commendation Certificate for Strong Commitment to HR Excellence from the Confederation of India Industries (CII).
1 million safe man hour-27 times; a record in fertilizer Industry 2 consecutive million safe man hours- 8 times. 3 consecutive million safe man hours- 4 times. 4 consecutive million safe man hours- once. Won first prize for safety among 162 fertilizers companies in the international fertilizers Industry section contest in 1992.
Ma pur c
ue
ma ageme
u e
32 | P a g e
33 | P a g e
4.1 THEORITICAL FRAMEWORK 4.2 INTRODUCTION 4.3 ABC ANALYSIS 4.4 EOQ (ECONOMIC ORDER QUANTITY) 4.5 REORDER-POINT 4.6 XYZ ANALYSIS 4.7 VED ANALYSIS 4.8 NON-MOVING ITEM ANALYSIS 4.9 INVENTORY MANAGEMENT OF RAW MATERIAL 4.10 INVENTORY MANAGEMENT OF FINISHED GOODS 4.11 PURCHASING SYSTEM
Ma pur c
ue
ma ageme
u e
34 | P a g e
4.1 INTRODUCTION:
In todays competitive market scenario, all organization are focusing their efforts on inventory reduction and lean management practices. It is always essential to control stocks at various location in organisation at optimum level, proper inventory control is possible only with the support of efficient stores management i.e, at various places such as respect of raw material, finished components, work-in-progress, finished goods and spare parts. The objective of inventory control can be met by analysing the process, Inventory carrying cost, procuring cost, set up cost, stock out cost, EOQ etc. For this various tools like ABC analysis, XYZ analysis, VED analysis, FSN analysis etc. are being used. Lead time management and vendor managed inventory (VMI) also facilitates to reduce the inventory to optimum level. In any industry there are four Ms that play a very important role in the smooth functioning of the organisation and relation and objectives, they are Man, Machinery, Money and Material. The management of material plays an important role as 60% of the capital cost is attributed to materials alone. Inventories represent aggregate of those items, which are either held for the sale in the ordinary course of the business, or are in the process of production for sale or yet to be utilized consumed in the production of goods and services. Inventory can be classified into seven categories. They are given below
y y y y y y y
Raw materials Finished parts Work-in-progress Finished goods Tools Machinery suppliers
RAW MATERIALS Raw materials is a fabricated materials, which have undergone no Conversion what so ever since their receipts from the suppliers. FINISHED PARTS Finished parts are those which may either be brought out parts or piece parts brought out parts are those finished parts sub-assemblies or assemblies, which are purchased from outside supplies. Piece part, are those parts, which are manufactured at the companys own plant from the basic raw material.
35 | P a g e
Ma pur c
ue
ma ageme
u e
WORK-IN-PROGRERSS- It comprises of the items in partially completed condition of manufacture. FINISHED GOODS these are the final products ready to be shipped. TOOLS- These comprise of standards tools and hand tools, standard tools used machines such as saws, drills, reamers, etc. and hand tools are drill guns, hammers, mallet, etc. SUPPLIERS- include materials used in running the plant or in making companys products but do not they go into the product. MACHINERY SPARES- Are which used to maintain without any problems so that there wont be unnecessary breakdowns, these spares include consumable spares, replacement spares, rotable spares, insurance spares.
y y
4.2 ABC ANALYSIS: All the spares and stores other than the construction meant for specific
construction activities are subjected to consumption analysis covering specific periods. Items constituting 70% of the total annual consumption by value are classified as A items. Items constituting the next 20% of the annual consumption value are classified as B class items. The remaining moving items constituting 10% of the annual consumption value are classified C class item Very large s. number of items by numbers falls under this classification whose consumption valued will be very low.
y
Class of item A B C
4.3 EOQ (ECONOMIC ORDER QUANTITY) : one of the basic decision that must be made in
any stock control system is that of determining the quantity to order since investment in inventories largely depends upon he quantities in which the items are ordered for replenishment. Ordering large lots infrequently, reduces administrative work but increases investment in stocks ordering small lots frequently keeps the investment in low but increases administrative work. This is because small lots require high order frequency, more purchase requisition require to be raised, more frequently the comparative statement must be raised, more he material must be received, more posting must be done moir bills must be handled. All these activities will call for more staff and hence more administrative cost and overheads. Therefore a rational approach is needed for fixing the order quantity of an item which will either increase neither the procurement cost nor the storage cost. So such quantity which result in equal procurement cost & storage cost is known as EOQ (Economic Order Quantity)
Ma pur c
ue
ma ageme
u e
36 | P a g e
O.C= cost of placing one order including the cost of receiving he goods i.e Cost of getting an item into the firms inventory Q= quantity per order in time C.C= annual carrying cost per unit The annual carrying costs are equal to the average value of stock held multiplied by carrying cost per unit and represent as EOQ (C.C)/2. Where
4.6 REORDER- POINT: An important question in any inventory management system is which
should an order for the purchases of an item should be placed, so the RE-ORDER point system provides he answer o his question. RE-ORDER point is the level of inventory at which the storekeeper should initiate the purchases requisition for the purchases of inventory in the amount of the economic order quantity. In designing a RE-ORDER point sub- system three items of information are needs as inputs to the sub-system. 1. Lead time, i.e time lag between indenting and receiving of the inventory is usually expressed in number of days. 2. Usage rate, i.e, the quantity per day at which the items consumed in production process or sold to customer. 3. Minimum Stock level, i.e, the quantity below which stock should not be allowed to fall. This can be calculated by multiplying the usage rate by the number of day the firm wants to hold as a protection against shortages. The following formula can be used for the calculation of the reorder point RE-ORDER POINT=UR*LT
= UR *DAYS OF SAFETY Where, UR= Usage rate per day LT= Lead time in Days DAYS OF SAFETY= Days of safety stock desired by the firm.
Ma pur c
ue
ma ageme
u e
37 | P a g e
Lead Time: There is a definite time lag between identification of the need for an item till it is received in store ready for issue after placing of order, manufacturing, transport, receiving and inspection. The total time elapses between the recognition of the need for an item and the fulfilment of the need is called lead time of the item and it plays an important role in establishing the right time for procurement. The right time for the procurement of an item is the time the stock on hand is just enough to satisfy the demand for the period required for the procurement since there may be increase in the demand between the time the order is placed and received in store, safety stock may be added to the average requirements of the lead time. This implies that the right time for procurement of an item is the time when stock drops down to a level which is enough to take care of demand during the period necessary to replenish stock and extension of lead time. IMPORTANCE OF LEAD TIME- Lead time has a direct relationship with investment in investors. The longer the lead time, higher is the requirement of the working capital. Since during the lead time, there is no delivery of material, the requirement of the production is met from the inventories in stock. Also since both lead time and consumption rate increase without notice, over and above the stock to take care of normal consumption during average lead time, safety stock is required to be maintained. This implies that a major factor which influences investment in inventories is that lead time and it is therefore responsibility of the purchase department to take steps to reduce the lead time.
ELEMENTS LEAD TIME:
y y y y y y y
Time required by the indenting department to convey requirements to purchase. Time required by the buyer to call quotation, make enquires/visit potential vendors negotiate terms, enter in to contract. Time required by the supplier to route buyers order through his administrative channel and fill the same. Transit time for goods to reach buyer works. Time required by the buyers receiving department to uncrate goods, prepare necessary documents and offer material for inspection. Time require by buyers inward to verify qualify of goods. Time required by the stores deportment to take goods in to stock, deposit into appropriate bins and update stock records.
Ma pur c
ue
ma ageme
u e
38 | P a g e
INTERNAL LEAD TIME: It is also called as buyer lead time, is the sum of servicing time and receiving time. The servicing time includes time required by the buyers to call quotations, compare quotations, visit vendors negotiate terms, obtain sanctions, enter in to contract etc. and receiving time is made up of time required to uncreated and inspects goods, move them between stores, deposit them in appropriate bins and make entries into stock cards.
It is also called as suppliers lead time, is made of administrative, manufacturing and delivery times required by the supplier. External lead time therefore is the time required to get the items from selected suppliers.
In ABC analysis consumption value of items for a particular time span is considered. In XYZ analysis inventory value of item on a particular day will be considered. All steps in ABC analysis are followed in XYZ analysis.
ESSENTIAL:
y y
DESIRABLE:
y y y y
The item is available at market. Lead time at procurement by low level Cost will not much VED analysis is generally usef7ull for spares parts inventory for companys plant and Machinery
Ma pur c
ue
ma ageme
u e
39 | P a g e
4.7 NON- MOVING ITEM ANALYSIS: All items held in stock will be subjected to non-movement analysis segregating the items for different non-movement periods like over 2yeary, over 5 years and 10 years so as to critically analyse the possibility of utilization of these times or otherwise for declaring surplus especially those items which have not moved for more than 5 years. Materials management department with the concerned technical departments will jointly do this analysis and separate list will be prepared, i.e code group wise, for the non-moving items beyond 5 years on an annual basis project wise under different code groups and steps would be taken so that the non-moving items are not indented again, until the existing stocks are utilized. Every effort will be made to keep as low practicable because this is non-productive inventory. Which is blocking the capital, storage space needing preservation and up keeping efforts and results, in extra inventory carrying cost. The company reduces the non-moving inventory by regular review for utilization or by declaring as surplus. CODIFICTION: Any organization engaged in production repair of construction is obliged to stock a large number of items of stores. It is essential to maintain accurate stock records of these items and also to know their location in store warehouses. The normal way of identifying an article is by simple description but this method is far from satisfactory. The best way is to list out the various items classifying or grouping them in some convenient manner and allotting each item a code number which if quoted is sufficient to indentify the items. Each code number is unique and represents one single item. By this maintenance of stocks will be carrier records with the help of data processing machines are able to give any output using these codes. These are three types of coding system are i.e Alphabetical, alphanumeric and numerical. STANDARDIZATION AND VARIETY REDUCTION: It is the process of establishing agreements up on acceptable levels of various characteristics of a product e.g. Quality, design, dimensions, physical characteristics, chemical composition, performance etc. on the basis of study and experience gained by established agreement or uniform identification is termed a standard / specification. Standardization is applied usually in two distinct areas in industry.
y y
AUTOMATIC REPLENISHMENT SYSTEMS: For few items in the stock that frequently moving and are usually of low value and required by more than one department are subjected to ARS, ARA is completely controlled by materials control department, they actually fix a minimum,
Ma pur c
ue
ma ageme
u e
40 | P a g e
maximum and recorder level. So as soon as these items reaches reorder level material control department will monitor it and indent is prepared immediately for procurement of these items.
STORES MANAGEMENT: Stores are used for receiving, storage and supply of the goods. It plays a major role in inventory management. Stores are the centre of activities of material in motion, an system must aim at good systems and procedures efficient O & M and smooth and speedy receipts and issues. The main objective of stores will be to provide efficient service to all operating functions such as production, construction, repair and maintenance. These are usually two sections in stores y Receipt / issue section y Custody section Custody section usually takes care of storage and preservation of the incoming goods where as issues / receipt section confirms of right input according to the order and issues the same according to the requirements.
STORES PRESERVATION: Proper material storage it very important and it is carried out
very effectively by the concerned department. For carrying out an effective preservation programs, factors such as economic aspects, period of idleness of a part, condition of the part, nature of the exposed surface as well as applicability of specific protective to be applied is considered and make sure that they do no exceed the cost of the part to be preserved. Some of the procedures followed are as follows:
y y y
All ferrous spares are given a protective cost of paint / varnish and stored. Precision spares like instruments, electronic and electrical spares, ball and roller bearing are covered in polythene bags, enclosing moisture absorbent chemicals like silica gel etc. Precision spares are maintained in dust free air conditioned rooms without sunlight and moisture.
Ma pur c
ue
ma ageme
u e
41 | P a g e
Reorder Point
XYZ Analysis
6 7
Component Spare parts. HML ( High, Medium, Low usage ) Unit Price of the Material Mainly to control purchase FSND ( Fast Moving, Slow Moving,Consumption pattern of To Control Obsolescence Non-Moving, Dead Items) the Material Problems faced in Procurement Lead Time Analysis and Purchasing Strategies
items
y y y y y y y y y y
French chalk powder is sparkled whenever possible and rubber like tires, tubes hoses, v belts etc. Items like electrodes are kept intact original packing and kept in dry storage room with same heaters to avoid excess of moisture affecting the coating. Sintered bush bearings are soaked in warm oil for 24 hours once in a year. Pipes over 2 are flushed / cleaned with dry our in these cases protective paints to the exterior painting. Vertical stocking of grin dining wheels with partitioning in between is necessary so that the faces do not came in to contact with each other. Strip heaters in all high voltage motors, LT motors should be provided to avoid moisture entering in to the motors. Copper parts are protected against ingress of ammonium salts. Silver and lead parts are cleaned with fresh water. Compressors and turbines of multistage pumps are rotated on their bearings every quaters to prevent staging / clogging. Anti-rodents and insecticides measures are taken on regular basis.
42 | P a g e
Ma pur c
ue
ma ageme
$ !
!
#"
! ! !
u e
Main Uses To Control Raw Material Components and Work in Progress Inventories in the normal courses of Business. To find that Particular Quantity of Which minimum total Inventory cost. It decides when it is time to Replenish.
Requirements. Value of items in Storage To review the Inventories and their Use scheduled intervals. To determine the stocking levels of
Critically of the
y y y
Shafts gears and impellers are stored horizontally after painting with dewatering protection films such as rust guards, rust line etc. Fasteners and screws that are kept in the racks are treated with hard preservation film. Perishables spares like V belts with a low shelf life are identified and the FIFO method of issues are practiced.
4.8 INVENTORY MANAGEMENT OF RAW MATERIAL:
Raw materials are those items which are yet to be consumed by the company. The main raw materials of the company are Phosphoric Acid, Sulphuric Acid and Ammonia. The main function of Raw Material Department is to procure right material at right time and at right cost so that there are no interruptions in the production CIL procured almost 99% of its raw materials from outside countries such as South Africa, Tunisia, and Bangladesh etc. Raw Materials storage tanks, which are situated in Kakinada, are given below-- AT KAKINADA: For Phosphoric Acid
For Ammonia
Similarly the details of the lead time (both internal and external) are given below
y y y y y y y
Time required by the indenting department to convert requirements to purchase 3 days Time required by the buyer to call quotation make enquiries/visit potential vendors, negotiate terms enter into a contract 45 days Time required by the supplier to route buyers order through his administrative channel and fill the same 7 days Transit time for goods to reach buyer works 10 days (indigenous work) 30 days (imported) Time required by the receiving department to uncreated goods prepared necessary documents and offer material for inspection 7 days Time required by buyer inward to verify quality of goods 3 days Time required by the stored department to take goods into stock, deposit into appropriate bins and update stock records 2 days
43 | P a g e
Ma pur c
ue
ma ageme
0)
( (&(' %&
&%
u e
: 1 tank of 5,000 MT capacities : 2 tank of 10,000 MT capacity : 2 tank of 12,000 MT capacity : 2 tank of 7,500 MT capacity : 2 tank of 1,500 MT capacity : 2 tank of 5,000 MT capacity : 4 tank of 2,400 MT capacity
Details of the norms provided by the operations department for the requirement of the raw materials, for the production of one metric ton of fertilizer.
PHOSPHORIC ACID DAP ( DA AMMONIUM PHOSPHATE) 14 : 35 : 14 12 : 32 : 16 AMMONOIA DAP (DI AMMONIUM PHOSPHATE) 12 : 32 : 16 14 : 35 : 14
Raw material department receives a production plan from the Operation Department it provides all the details of the production for that particular financial year & it also provides the required norms. Now raw material department, depending upon the production plan & the norms provided, prepares a monthly schedule rep[ort which not only consist of the production plan, norms but also the information of the closing stock at the end of that particular year / day / month. So depending upon the available stock, consumption rate, lead time and storage capacity raw material department prepares the monthly schedule report which provides all the necessary information of when to procure and where to store the raw materials. It also consist of the details about the name and other details of the supplier.
The company is mainly engaged in manufacturing the complex fertilizers DAP, which is having the highest nutrient value of its grade with 15% Nitrogen and 46% of phosphorous. The major raw material required for manufacturing DAP are Ammonia and Phosphoric Acid. The storage tanks for these raw materials are situated in Kakinada
Ma pur c
ue
ma ageme
4 38 54 52
76
5 5354 23
32
u e
44 | P a g e
Year
March 31, 2006 March 31, 2007 March 31, 2008 March 31, 2009 March 31, 2010
Year
March 31, 2006 March 31, 2007 March 31, 2008 March 31, 2009 March 31, 2010
Ma pur c
ue
ma ageme
A @E BA B9
DC
B B@BA 9@
@9
u e
Price in lakh
32284.74 33165.31 44479.72 98342.97 68966.65
45 | P a g e
For Urea:
Year
March 31, 2006 March 31, 2007 March 31, 2008 March 31, 2009 March 31, 2010
For Sulphur:
Year
March 31, 2006 March 31, 2007 March 31, 2008 March 31, 2009 March 31, 2010
Ma pur c
ue
ma ageme
H GR IH IF
QP
I IGIH FG
GF
u e
46 | P a g e
Year
March 31, 2006 March 31, 2007 March 31, 2008 March 31, 2009 March 31, 2010
Sales & distribution department ensure that finished goods reach the right place at right time and right cost. Operating department prepares the production plan and sends it to vice president (Marketing) who along with RMO of different region prepares a sales plan & sends it to the sales &distribution department. These plans are of different formats:
y y y y y
Product wise, Season wise sales plan Product wise, month wise sales plan Marketing office wise, month wise DAP sales plan Marketing office wise, product wise sales plan Month wise4, Destination wise rake movement plan
Sales &distribution department considers both sales and production while preparing a dispatch plan, s & d department also makes sure to cross check the monthly stock reconciliation report, sent by RMO from every regi0on, so that details about the closing stock of each centre are known. So any variation in the closing stock will lead to a little variation in the dispatch plan when compared to sales.
Ma pur c
ue
ma ageme
U TY VU VS
XW
V VTVU ST
TS
u e
47 | P a g e
Product
Ammonium phosphate Ammonia Muriate of Potash Single Super Phosphate
Product
Ammonium phosphate Ammonia Muriate of Potash Single Super Phosphate
Ma pur c
ue
ma ageme
b af cb c`
ed
c cacb `a
a`
u e
SALES
Price ( in lakh)
91799.12 1065.55 4996.41 3421.78
48 | P a g e
Product
Di ammonium phosphate Ammonium phosphate Ammonia Muriate of Potash Single Super Phosphate
Product
Di ammonium phosphate Ammonium phosphate Ammonia Muriate of Potash Single Super Phosphate
Ma pur c
ue
ma ageme
i hs pi pg
rq
p phpi gh
hg
u e
Quantiy ( in MTs)
558931 1459776 88271 55366 4831
49 | P a g e
Product
Di ammonium phosphate Ammonium, phosphate Ammonia Muriate of Potash Single Super Phosphate
To keep pace with changed market conditions. To satisfy demand during period of replenishment. To carry reserve stocks to avoid stock outs. To prevent loss of sales. To level out or stabilise production. To satisfy other business constraints. Suppliers condition of lien quantity. Government regulation. Seasonal availability. Demand forecast error Suppliers delivery interval. Lead time offered to customers are shorter than supplier lead-time Minimisation of delivery costs.
INTRODUCTION: The purchasing department occupies a vital and unique position in the organisation of an industrial concern because purchasing is one of the main function of the success of a modern manufacturing concern Mass production industries, since they rely upon a continuous how of right material, for demand for an efficient purchasing division. The purchasing function is liaison agency, which operates between the factory organization and outside vendors on all matters of procurement. Purchasing implies procurement materials, suppliers, machinery and services need for production and maintenance of the concern.
Ma pur c
ue
ma ageme
v u wv wt
yx
w wuwv tu
ut
u e
50 | P a g e
To procure right material. To procure material in right quantities. To procure material of right quality. To procure from right and reliable source or vendor. To procure material economically, i.e at right or reasonable price. To receive an delivery of material at right place and at a right time.
Keep records- indicating possible material and their substitutes. Maintain records of reliable sources of supply and price of materials. Review of materials specification with an idea of simplifying and standardizing them Making contacts with right sources of supply at competitive price. Procure and analyze quotations. Place and follow up purchase orders. Maintain records of all purchases. To make sure through inspection that right kind (i.e. quantity quality etc) To act as liaison between the vendors and different department of the concern such as production, quality control, finance, maintenance etc. To check if the material has been purchases at right time and at economical rates. To prepare purchasing budget. To prepare and update list of materials required by different departments of the organization within a specified span of time.
CIL PURCHASE DEPARTMENT: The internal organization of purchase department is on a line basis with purchasing agent, director of purchase or purchasing manager being in charge of purchase department. He is responsible for the overall efficient operation of the department. The purchasing manager is however assisted in purchasing by a number of assistants an few clerical staff. The purchasing manager has the powers to executer purchasing contracts for the concern. He divides the duties among the assistant according to the nature of purchase to be made. For example goods, one assistant may purchase only electrical another (major) raw material, third plant equipment and so on. Purchasing section places orders with the vendors, purchase service section follows the progress to he order at its shipment by vendors and its vendors end its final receipt in the company. At CIL Kakinada as a part of modernisation and up gradation of technology in line with government thinking, the company has entered in to a contract with m/s Satyam enterprise solution
51 | P a g e
Ma pur c
ue
ma ageme
u e
a cost of Rs 3.00 Cr for implementation of ERT/SAP. The total company operations all over India i.e Production Unit, Corporate Office, Liaison Office and various marketing offices are being hooked up through, a network (WAN). At CIL they are using SAP to overall department in the plants up to date each and every transaction in purchasing, the vendor department, material procurement, stores and accounts. At CIL Kakinada as a part of Logistics Development, company has implemented ERP (SAP) system. In this SAP system not only material procured but material consum in daily ed production every transaction, can be updated in the system. The companys material department is maintaining the following files.
y y y y y y y y y
Purchasing Requisition (PR) Purchasing Order (PO) Daily Receipt Report (DRR) Discrepancy Report (DR) Materials Receipt Report (MRR) Materials Issue Voucher (MIV) Materials Return Voucher (MRV) Materials Transfer Voucher (MTV Stores Correction Voucher (SCV)
The above shown files will give updated details of materials state. STEPS IN COMPLET PURCHASING CYCLE:
y y y y y y y y y y y
Recognition of need, receipt and analysis of purchase requisition. Selection of possible potential sources of supply Making the request for quotation Receipt and analysis of quotation Selection of right source of supply Issuing the purchase order. Follow up and expedi6ing the orders. Analyzing received reports and processing discrepancies and rejection. Checking and approving vendors invoices for payment Closing completed order Maintenance of records
Ma pur c
ue
ma ageme
u e
52 | P a g e
CHAPTER- V DATA ANALYSIS& INTERPRETATION 5.1 ANALYSIS & INTERPRETAION 5.2 ABC ANALYSIS 5.3 CALCULATION OF EOQ FOR 2009-2010 5.4 FIRST IN FIRST OUT 5.5 STANDARDISATION AND VARIETY REDUCTION 5.6 INVENTORY ANALYSIS
Ma pur c
ue
ma ageme
u e
53 | P a g e
5.1 ANALYSIS & INTERPRETATION: Inventory control is very essential for any organization. An organization represents an aggregate of those items which are either held for the sale in ordinary course of business or in the process of production (i.e, work-in-progress) or yet to be utilized in the production of goods and services. In case of CIL, Raw Material Department procures the required raw material. Here central stores department take care of spares consumed in the production, Sale & Distribution. The tools used by the company for the inventory control in stores are y ABC ANALYSIS y ECONOMICALLY ORDER QUANTITY (EOQ) y FIFO (First In First Out) y NON MOVING Item analysis 5.2 ABC ANALYSIS:
y y y
A category items otherwise called as high priority items which requires tight control including complete accurate records, regular and frequent review by management. B category item which is called medium priority items requires only normal control. C category items which require lowest priority which needs simplest possible control perhaps use a two bin system or periodic review system.
Ma pur c
ue
ma ageme
h gl ih if
kj
i igih fg
gf
u e
54 | P a g e
TABLE -1: ABC ANALYSIS OF THE YEAR 2005 -06 Units s.no 1
SLEEVE SHAFT CVB 6754-1 FOR GA614N
Description of material
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
SAP REAR BEARING OUTER CVB 4606-0GA701 COVER END FOR FRONT BRG O/B CVB 1346-2 RING STATIONERY SEAL TEFLONGA701 GOVERNOR SLEEVE SAE 64 CVC4765 GA701 GOVERNOR WEIGHT CVA 1121GA 7012 GASKET CASE PLATE CVA 1360 LABYRINTH RING CVA 1166 904L GA 615 SHAFT CR STEEL CVB 1164-1 GA 1901 GOVERNER SPRING CVA 1535-2 IMPELLER 9004L CVD2159 GA615 EV ACIDPUMPS SLEEVE BUSING THRUST CVA 1782-1 GA703 GOVERNER SLEEVE CVB 2296-2 GA703 RINGS STATIONARY SEAL PTFE CVA GASKET PTFE 4 1/2*3*I/8 THICK PIPE CONNECTING CVB 1076-3 WITH TC OIL SEAL 3 1/4*4 1/4*1/2M TYPE SLEEVE SHAFT (SET=3 NOS)PUMP GA 506 INSERT GRAPHITE CVA 1484-1
Ma pur c
ue
ma ageme
o ns po pm
rq
p pnpo mn
nm
u e
211.32 743.34 1850 144.5 1932.07 655.52 111.44 6772.90 18655.81 8.27 41256.75 429.75 2279.51 192.79 44.83 12576.21 129.92 8399.70 138.67
23 7 6 8 6 57 42 20 20 1820 6 38 27 16 50 16 2 1 31
4860 5203 11100 1156 11592 37365 4680 135458 373117 15051 247541 16331 61547 3085 2242 201219 260 8400 9879
55 | P a g e
TABLE -1.1:
Descrition of material
Ma pur c
ue
ma ageme
v uz wv wt
yx
w wuwv tu
ut
u e
The percentageOCommulative Commulative Annual wageI ConmulativeAn each item onToat descendingOrual wages inventroyValue percentage weight
373117
373117
30.31
30.31
247541
620658
20.11
50.42
10
201219
821877
16.35
66.77
15
135458
957335
11
77.77
20
80964
1038299
60.57
84.34
25
61547
1099846
4.99
89.33
30
37365
1137211
3.04
92.37
35
16331
1153542
1.33
93.7
40
15051
1168593
1.22
94.93
45
11592
1180185
0.94
95.8
50
11100
1191285
0.90
96.77
55
9879
1201164
0.80
97.57
60
8400
1209564
0.68
98.25
65
5203
1214767
0.42
98.68
70
4860
1219627
0.39
99.07
75
4680
1224307
0.38
99.45
80
3085
1227392
0.25
99.70
85
2242
1229634
0.018
99.88
90
1156
1230790
0.0.9
99.98
95
260
1231051
0.02
100
100
56 | P a g e
% COMMULATIVE ITEMS
A B C
67 22 11
67 89 100
15 15 70
15 30 100
INTERACTION:During the year 2005-06, 15% of the items have been classified as A category items because it have the 67% (nearly 70%) of the total consumption of units soit requires very strict control and no chance to maintain safety stock for these category items. And maintain the weekly control statements. Under B category there are 15% of items. Which requires only medium control because its value of consumption is less than the A category items that is 22% and there is a chance to maintain the low safety stock and prepare monthly control reports. The remaining items are under C category which requires less control because its value of consumption is 11%, So there is high safety stock. And prepare control reports for quarterly.
57 | P a g e
Ma pur c
ue
ma ageme
} | ~} ~{
~ ~|~} {|
|{
u e
58 | P a g e
CVD2159
SHAFT CR STEAL CVB 1164-1 GA 1901 LABYRINTH RING CVA 1160 904L GA 615 GOVENOR SLEEVE CVB 2296-2 GA703 GOVENOR WEIGHT CVA 1121 GA7012 SLEEVE SHAFT (SET=3NOS)PUMP GA506 SLEEVE SHAFT CVB6754-1 FOR GA614N GOVENOR SLEEVE SAE 64 CVC 4765 GA 701 GOVENOR SPRING CVA 1535-2 COVER END FOR FRONT BRG O/B CVB 1346-2 SLEEVE BUSHING THRUST CVA 17821GA703 INSERT GRAPHITE CVA 1484-1 RING STATIONARY SEAL PTFE CVA BUSH THRUST SLEEVE GUN METAL GA701 RING STATIONARY SEAL PTFE CVA GASKET PTFE 4 1/2 X3X1/8 THICK CAP REAR BEARING OUTER CVB 4606 0 GA701 GASKET CASE PLATE CVA 1360 PIPE CONNECTING CVB 1076-3 WITH TC OIL SEAL 3 X4 X1/2M
Ma pur c
ue
ma ageme
u e
GA615EV
59 | P a g e
A B C
70 21 9
70 91 100
15 20 65
15 35 100
INTERPRETATION: During the year 2006-07, 15% of items have been classified as A category items these items requires strict control; and there is no chance to maintain safety stock because this category items have maximum consumption value. And compared to the previous year ther e is no change in weight of A class items but the change in between the items based on their annual usage. Under B category there are 29% of the items. Which requires a minimum control and there is a chance to maintain the low safety stock and compared to previous year the weight age of B class items increased 5%. Remaining items are under C category almost more than half of inventory is maintained under this category but compared to last year class items weight age reduces to 5% and in this category items requires limited control because it has the low consumption value than A & B category items.
60 | P a g e
CL
% CUMUL T LUE
TEMS
% CUMUL T TEMS
Ma pur c
ue
ma ageme
u e
61 | P a g e
SHAFT CR STEAL CVB 1164-1 GA 1901 IMPELLER 904L CVD2159 GA615 SLEEVE GA614N SHAFT CVB6754-1
LABYRINTH RING CVA 1160 904L GA 615 PIPE CONNECTING CVB 1076 -3 WITH TC GOVENOR WEIGHT CVA 1121 GA7012 GOVENOR SLEEVE CVB 2296-2 GA703 GOVENOR SLEEVE SAE 64 CVC 4765 GA 701 SLEEVE SHAFT (SET=3NOS)PUMP GA506 COVER END FOR FRONT BRG O/B CVB 1346-2 SLEEVE BUSHING THRUST CVA 17821GA703 GOVENOR SPRING CVA 1535-2 RINGS STATIONARY SEAL TEFLON GA701 RING STATIONARY SEAL PTFE CVA INSERT GRAPHITE CVA 1484-1 GASKET CASE PLATE CVA 1360 BUSH THRUST SLEEVE GUN METAL GA701 GASKET PTFE 4 1/2 X3X1/8 THICK CAP REAR BEARING OUTER CVB 4606 0 GA701 OIL SEAL 3 X4 X1/2M
Ma pur c
ue
ma ageme
u e
25199
24050 18479 16870 6936 3170 5099 4346 4226 3900 1847 909
868813
892863 911342 928212 935148 986392 94622 950569 954795 958694 960182 961091
2.62
2.50 1.92 1.76 0.72 0.32 0.53 0.45 0.44 0.41 0.15 0.09
90.39
92.89 94.81 96.57 97.29 99.13 98.44 98.89 99.33 99.74 99.89 99.89
45
50 55 60 65 70 75 80 85 90 95 100
62 | P a g e
CL SS
% ALUE
USAGE
A B C
74 16 10
74 90 100
25 20 55
25 45 100
INTERACTION: During the year 2007-08, 35% items are under the A category because its value of consumption is 74 so strict control is maintain on these items. Compared to previous year there is 10% increase of weight age of items so the duty of monitoring of A class items has been increased. Under B category 20% of items are there. In this there is no change in the weight age of items compared to last year. Under C category 55% of items are there so half of the inventory under C class because is a high safety stock and a minimum control is suited these items. So that prepared stock records on quantity duration.
% CUMULAT ALUE
TEMS
% CUMULAT TEMS
63 | P a g e
Ma pur c
ue
ma ageme
u e
64 | P a g e
SHAFT CR STEAL CVB 1164-1 GA 1901 IMPELLER 904L CVD2159 GA615 LABYRINTH RING CVA 1160 904L GA 61 SLEEVE GA614N SHAFT CVB6754-1 FOR
GOVENOR SPRING CVA 1535-2 GASKET PTFE 4 1/2 X3X1/8 THICK SLEEVE SHAFT (SET=3NOS)PUMP GA506 GOVENOR SLEEVE SAE 64 CVC 4765 GA 701 SLEEVE BUSHING THRUST CVA 17821GA703 INSERT GRAPHITE CVA 1484-1 GOVENOR WEIGHT CVA 1121 GA7012 COVER END FOR FRONT BRG O/B CVB 1346-2 GOVENOR SLEEVE CVB 2296-2 GA703 BUSH THRUST SLEEVE GUN METAL GA701 PIPE CONNECTING CVB 1076-3 WITH TC RINGS STATIONARY SEAL TEFLON GA701 RING STATIONARY SEAL PTFE CVA GASKET CASE PALTE CVA 1360 OIL SEAL 3 X4 X1/2M CAP REAR BEARING OUTER CVB 4606 0 GA701
Ma pur c
ue
ma ageme
u e
13322
12109 1179 9250 9119 5283 2552 2457 2313 1894 780 100
600744
612853 624652 633902 643021 648304 650856 653313 655626 657520 658300 658300
2.02
1.84 1.79 1.41 1.39 0.80 0.39 0.37 0.35 0.29 0.12 0
91.25
93.09 94.88 96.29 97.68 98.487 98.87 99.24 99.59 99.88 100 0
45
50 55 60 65 70 75 80 85 90 95 100
65 | P a g e
CLASS
% ALUE
USAGE
A B C
69 22 9
69 91 100
20 20 60
20 40 100
INTERPRETATION: During the year 2008-09, 20% of the items classified as A category. Which requires the maximum control because this class 0 items have high value of consumption and compared to previous year its weight age is decreased to 5%? Under B category 20% of items are there. These items required a minimum control. Under C category 60% of items are there half of the inventory maintained under the category it s have less values of consumption than A & b minimum control is required to this category and a quarterly stock reports are prepared to this category.
% CUMULAT ALUE
TEMS
% CUMULAT TEMS
66 | P a g e
Ma pur c
ue
ma ageme
u e
67 | P a g e
SHAFT CR STEAL CVB 1164-1 GA 1901 IMPELLER 904L CVD2159 GA615 SLEEVE GA614N SLEEVE GA506 SHAFT SHAFT CVB6754-1
(SET=3NOS)PUMP
COVER END FOR FRONT BRG O/B CVB 1346-2 PIPE CONNECTING CVB 1076-3 WITH TC INSERT GRAPHITE CVA 1484-1 GASKET PTFE 4 1/2 X3X1/8 THICK SLEEVE BUSHING THRUST CVA 17821GA703 GOVENOR WEIGHT CVA 1121 GA7012 LABYRINTH RING CVA 1160 904L GA 615 GASKET CASE PALTE CVA 1360 OIL SEAL 3 X4 X1/2M RING STATIONARY SEAL PTFE CVA BUSH THRUST SLEEVE GUN METAL GA701 CAP REAR BEARING OUTER CVB 4606 0 GA701 RINGS STATIONARY SEAL TEFLON GA701 GOVENOR SPRING CVA 1535-2 GOVENOR SLEEVE SAE 64 CVC 4765 GA 701 GOVENOR SLEEVE CVB 2296-2 GA703
Ma pur c
ue
ma ageme
u e
7736
3933 3386 3232 2825 2699 2113 1487 1156 678 0 0
487499
491432 494818 498050 500908 503607 505720 507207 508363 509041 509041 509041
1.52
0.77 0.67 0.63 0.56 0.53 0.42 0.29 0.22 0.13 0 0
95.76
96.53 97.2 97.83 98.39 98.92 99.34 99.63 99.85 99.98 99.98 99.98
45
50 55 60 65 70 75 80 85 90 95 100
68 | P a g e
CLASS
% ALUE
USAGE
A B C
74 16 10
74 90 100
15 15 70
15 30 100
INTERPRETATION: During the year 2009-10, 15% of items are under A category because its value of consumption is 74 these are required strict control and there is no chance to maintain the safety stock because it have high consumption value and comp ared to previous year this A class items weight age again decrease to 5%. Under B category 15% items are there it requires a minimum control only. And maintain a monthly stock records. Under category more than 70% items are there its value of consumption is 10 so it requires a minimum control and quarterly stock records.
% CUMULAT ALUE
TEMS
% CUMULAT TEMS
69 | P a g e
5.3 CALCULATION OF EOQ (ECONOMICALLY ORDER QUANTITY) FOR 2009-10: FOR AMMONIA:
Annual demand (D) Unit price Ordering cost (O.C) Carrying Cost (C.C)
EOQ=
ITERPRETATION:
EOQ is an important technique in inventory management. EOQ for Ammonia is 1473 units per order i.e.; in one order 1473 units will be order to reduce the carrying cost as well as buying cost which could be n optimum level for maintaining and as well as for the production activities.
Ma pur c
ue
ma ageme
2 * D * O.C C.C
u e
70 | P a g e
EOQ=
INTERPRETATION:
EOQ for rock phosphate is 1772 units per order i.e.; in one order 1772 units will be in order to reduce the carrying costs as well as buying cost. With respect to Rock phosphate, 1772 mt are being placed as an order which could be an optimum level for maintaining and as well as for the production activities.
Annual demand (D) Unit price Ordering cost (O.C) Carrying cost (C.C)
Ma pur c
ue
ma ageme
2 * D * O.C C.C
u e
71 | P a g e
INTERPRETATION:
EOQ for sulphuric acid is 312 mt per order i.e.; in one order 312 mt will be order to reduced the carrying cost as well as buying cost. With respect to Sulphuric acid 312mt units are being placed as order which could be an optimum level for maintaining and as well as for the production activities.
FOR SULPHUR:
Annual demand (D) Unit price Ordering cost (O.C) Carrying cost (C.C)
INTERPRETATION:
EOQ for sulphur is 1456 mt per order i.e. one order 1456 mt will be in order to red uce the carrying cost as well as buying cost. With respect to sulphur 1456 mt are being placed as order which could be an optimum level for maintaining and as well as for production activities.
72 | P a g e
Ma pur c
ue
ma ageme
EOQ=
u e
= 160097 mt = 3113 Rs = 4126 Rs = 20% on unit price = 623 Rs EOQ= 2 * D * O.C C.C 2 * (160097)( 4126) 623
= 1456 mt.
FOR UREA:
Annual demand (D) Unit price Ordering cost (O.C) Carrying cost (C.C)
INTERPRETATION:
EOQ for urea is 1059 mt per order i.e. in one order 1059 mt will be order o reduce the carrying cost. With respect to urea, 1059 mt is being placed as order which is the optimum level for maintaining and as well as for the production activities.
Ma pur c
ue
ma ageme
u e
EOQ=
= 1059 mt.
= 133024 mt = 28246 Rs
73 | P a g e
INTERPRETATION:
EOQ for phosphoric acid is 1160 mt per order i.e. in one order 1160 units will be in order to reduce the carrying cost as well as buying cost. With respect to phosphoric acid 1160 mt are being placed as an order which could be an optimum level for maintaining and as well as for the production activities.
Ma pur c
ue
ma ageme
EOQ=
u e
= 1160 mt.
items at lesser investment. Every item on receipt in subjected to this analysis and relevant size and specification are note down separately for carrying out these exercise at regular intervals with consulting the user department. STANDARDISATION OF EQUIPMENT: According to the company, the standardisation of the equipments before procurement is very essential to avoid building of the every model/brand equipments. The specifications of every equipments/machinery as replacement/additions are critically examined with a view to avoid adding any new variety/brand/model of equipments leading to building up of parallel inventory of spares. STORES MANAGEMENT: CIL is having central stores for receiving and storing of all incoming equipments, spares and stores till these are issued and disposed. These stores are under the control of appropriate level officers reporting to head of the materials department of the project. Receipt section. Custody / Issue section.
RECEIPT SECTION:
y y y y y y y y y y y y y y
Receipt of dispatch of documents and proper recording of details. Taking delivery of the incoming consignment from the carriers. Ensuring proper receipt of door delivery consignment. Transportation of materials from carriers to receipt section. Preparation of receipt vouchers. Custody of incoming consignments till handed over to custody section. Handling over the accepted material to the custody section. Taking claim action regarding rejected/short received/not received materials with the carriers and suppliers and underwriters. Lodging and follow up of the claims with carriers, underwriters and suppliers. Checking of freight bills. Reconciliation of store in transit. Material coverage of transit insurance for incoming /outgoing consignments. Coverage of fire insurance policy for store, important installation/capital items Maintaining the receipt voucher register/outgoing register.
CUSTODY/ISSUE CELL:
y y
Keeping a safe custody of material inside the go downs as well as the open yard. Undertaking periodical preservation action to ensure materials are not allowed to get damaged / deteriorated in storage.
Ma pur c
ue
ma ageme
u e
75 | P a g e
y y y y
Arranging issue of materials against proper authorization given by the head of the department from time to time. Accounting of the materials as per the receipt vouchers and entering transactions in the Kardex card or in the material master records (SAP) promptly. Accounting of the materials returned i.e. partly used, scrap materials etc. Examine frequently the condition of fencing, lighting, locking arrangements of godowns and main gates, security checks etc and take remedial measure wherever necessary. In case of POL depots, proper care / safety is to be followed with displaying board of no smoking etc. Fire extinguishers and other safety appliance are to be maintained properly. For serviceable partly used item are to be accounted in the ledger with NIL value. However user department should return the item with proper return voucher.
When the material reaches the stores the details of the receipts will be entered in LR / RR register showing all relevant particulars like station of booking, destination station, mode of dispatch, purchase order reference, no. of packages, freight payable / paid and amount etc. It will be examined by the store officials for any outwardly visible damages to the packages at the carrier godown. In case of any damages he will ask for open delivery of the consignments. Open delivery from the carrier is taken in association with the concerned technical department for the correct identification of the items along with the concerned purchase order and suppliers bill. In case of any doubt the package would be got re weighed before taking delivery and if ever thing is present as per the requirement the payment is done through credit notes or cash. In case of any short receipts of packages stored officials would ask for shortage certificates from the carrier. If there are no visible damages, these items will be stored at appropriate places at receipt section where inspection and numbering is done before reaching the final storage places. These packages are opened there and items will be tallied with the copy of bills already received by the receipt section to ascertain correctness of the number of items. All incoming consignments will be entered in the stores receipt register of the receipt section in serial order of the receipt indicating the complete details of the suppliers, dispatch particular, purchase orders along with the freight particulars. A card known as Kardex card is also prepared for each and every item in which number of receipts and number of issues are noted down with transaction dates (after implementing SAP, these details are filled in Material master). Does it provides the exact available of the stock. It also provides the storage place of that particular item which enables store keepers for convenient issues to the user department. All transaction of receipts and issues are to be done preparing. The receipt vouchers and issue vouchers. The issue vouchers would be department indicating the items, quantities demanded, code numbers, cost central numbers etc duly signed by the authorized officer. The store keeper concerned while issuing would indicates his serial numbers reference of the voucher on all copies
76 | P a g e
Ma pur c
ue
ma ageme
u e
along with the quantities issued and the balance after positing of the issue. The same will be recorded in the issue control register. The issue voucher will also be signed by the store in charge, along with concerned storekeeper.
FIRE PREVENTION: As lot of inflammable materials will be stored in the central stores, CIL takes necessary prevention to avoid any fire hazards. Some of the precautionary actions are:
y
y y y y
y y
Stores godown, store yard and storage area around Petrol, Diesel tanks, Lubricants are declared as NO SMOKING zone, prominent boards with no smoking painted there upon are displayed at all such places. Adequate number of and types of fire extinguishers are provided at proper places to combat general fires, oil fires and electrical fires. Adequate numbers of fire buckets with sand, some water are kept in the stands duly filled to be used in case of any eventuality fire. Fire alarm bell is mounted on the fire bucket stands to sound fire alarms Drainage arrangement with adequate slope are provided in place of the storage of the lubricants, plants, varnishes etc.so that any leakage may drain off from the storage area. Cotton wastes , paints, and other inflammable materials are stored separately. During night times when store is closed it is ensured that the main switch of the store is switch off to avoid any electrical short circuiting and consequent fire hazards.
COLLECTION OF SCRAP AND USED MATERIALS: The indenting department after using the issue materials would return the corresponding scrap or old spares to the stores for custody and disposal. Such materials will be accounted in separate ledgers and are segment according to the nature of the. material s. And such scrap items will be listed and got surveyed by the survey committee before offering the same for disposal by tender or auction.
Ma pur c
ue
ma ageme
u e
77 | P a g e
WORK IN PROGRESS:
The inventory of raw material has been increased from the year 2005-2006(18363.82) to the year2008-2009(81477.50). But it decreases in the year 2009-2010(54443.80)
INVENTORY Raw material Raw material Raw material Raw material Raw material
The inventory of Work-in-progress value has been gradually increased from the year 20052006(858.74) to the year 2009-2010(1707.25)
Ma pur c
ue
ma ageme
u e
78 | P a g e
FINISHED GOODS:
INVENTORY Finished goods Finished goods Finished goods Finished goods Finished goods YEARS 2005-2006 2006-2007 2007-2008 2008-2009 2009-2010 VALUES 18224.85 19400.43 18824.12 48774.27 33217.16
The inventory of the Finished goods has been increased from the year 2005-06 (18363) to the year 2008-09 (48774.27). But it decreases in the year 2009-10 (33217.16)
Ma pur c
ue
ma ageme
!
u e
79 | P a g e
6.4 BIBLILOGRAPHY
"
Ma pur c
ue
ma ageme
$ #( %$ %"
#"
u e
80 | P a g e
6.1 FINDINGS :
y
Company is right now using only for inventory managements technique suggest ABC analysis, XYZ analysis FIFO, non moving items. The company is using ABC analysis for the past 5 years. EOQ method is followed by the company only on few inventories. All the inventories are not included in ABC and XYZ analysis. Large size of inventories is maintained by the company under XYZ and ABC analysis in order to reduce the ordering cost. The carrying cost incurred by the company for maintaining the given level of inventory is increasing every year. The equipments and spares in general store are also to maintained as an inventory wish requires huge investments.
y y y y
Ma pur c
ue
ma ageme
1 05 21 2)
43 2 2021 )0
0)
u e
81 | P a g e
6.2 SUGGESTIONS:
y
Company should maintain an optimum level of inventory to ensure efficient and smooth production. The company is investing huge amount on A class and X category items on which the company would loosed opportunity cost. Therefore company shall reduce size of inventory on these categories. The categories under ABC have to be continuously monitored and review. The company can maintain only minimum investment in order to maintain efficiently. E.O.Q method of inventory managements can be extended to other items of inventory. Company should make an effort to reduce carrying cost by maintaining expensive inventories less in number. LIFO method can also be used effectively in case if the item is quickly perceivable & also in case of heavy investment inventories. The other techniques like V.E.D analysis, P.V.A analysis etc. can also be used applied by the company to manage the inventories. The firm should estimate the cost, return and risk factor also in establishing its inventory policies. Instead of maintaining huge size of inventory, the company can maintain safety stock in all the items. The re-order point has to be calculated by the company in order to avoid excess inventory and to reduce lead time
Ma pur c
ue
ma ageme
8 7B 98 96
A@ 9 9798 67
76
u e
82 | P a g e
6.3 SUMMARY:
Inventory management as a project has been carried over in CIL for a duration of 6 weeks. This topic is chosen because almost 60% of the working capital is blocked in inventories for all the Indian companies.
The study period is from 2005-06 to 2009-10. The techniques used by the company in managing inventory such as ABC analysis, E.O.Q, FIFO etc.have been analyzed thoroughly & inferences were also presented respectively. There are some drawbacks with the company in inventory management, the suggestions were given accordingly.
Hopefully the company would consider the suggestion in managing the inventories effectively in coming years.
Ma pur c
ue
ma ageme
E DI FE FC
HG F FDFE CD
DC
u e
83 | P a g e
6.4 BIBLIOGRAPHY:
Fundamentals of financial management by D. Chandra Bose Fundamentals of financial management by Paresh Shah Financial management by I.M Pandey
Ma pur c
ue
ma ageme
R QV SR SP
UT S SQSR PQ
QP
u e
84 | P a g e