Professional Documents
Culture Documents
All Lab Format
All Lab Format
IL WORK
31.5mm C Sand 31.5mm C Sand
Source of Material :
Moisture content ( % )
Chainage/Location : Sampled By :
75.0
19.0
4.75
2.0
0.425
0.075
Pan
Gravel = %
Sand = %
Remarks :-
Chainage/Location : Sampled by :
Type of Material :
Vd - Vk
Free Swell Index = x 100 (%)
Vk
Source of Sand :
Trials
Weight of Sand in Cone Average
1 2 31.5mm
1. Weight of sand + Pouring cylinder before pouring, A (g)
Pit Number
Test pit location
Offset from centre line (m)
Layer Thickness (mm)
FIELD DENSITY Unit
Weight of sand + cylinder before pouring (W1) (g) (gms)
Weight of sand + cylinder after pouring (W2) (g) (gms)
Weight of sand in hole (W4=W1-W2-W3) (g) (gms)
Volume of Hole (V = W4/Ys) (cc)
Weight of wet material from hole (Ww) (g) (gms)
Wet density of material from Hole {Yb=Ww / V} (gm/cc)
MOISTURE CONTENT
Wt.of Wet Material (W5) in gm (gms)
Wt. of Dry Material (W6) in gm (gms)
Wt. of Water (W7) = (W5 - W6) in gm (gms)
Moisture Content (W) = 100x(W7)/( W6) in % (gms)
Moisture meter reading (%)
Corrected moisture content By Moisture Meter (%)
RESULTS
Field dry density {Yd=100XYb/(100+W)} (g/cc)
Compaction achieved (100xYd/MDD) (%)
Specified Compaction (%)
Average Compaction (%)
Remarks:-
B WORK
31.5mm C Sand 31.5mm C Sand
RETE WORK
31.5mm C Sand 31.5mm C Sand
Location Sampled by
Source Tested By
Type of Material
FOR INDIVIDUAL GRADATION OF COARSE AGGREGATE
Total Wt. of Sample:- 20mm Aggregate
Percentage Passing for Single sized aggregate of
Weight Retained Cum. Weight of Cumulative Percentage nominal size as per table 2 of IS: 383
I.S. Sieve (mm) (gms) Retained (gms) Percentage Passing (%)
Retained (%) 20mm
40 100
20 85 - 100
10 0 - 20
4.75 0-5
Pan
Total Wt. of Sample:- 10 mm Aggregate
1.18 30 - 70 55 - 90 75-100
0.600 15 - 34 35 - 59 60 - 79
0.150 0 - 10 0 - 10 0 - 10
Pan
Zone :-
Fineness modulus :-
Remarks:-
SILT CONTENT
TEST METHOD IS : 2386 Part-1
Location of Lab. Date Sampled:
Sample No Date Tested
Location Sampled by
Source Tested by
Proposed Use
Fine Aggregate, in %
Sr. No. Description
Trial - 1 Trial - II Trial - III Remarks
Engineering Procurement & Constraction Mode , Improvement of Nila Junction-Brahmanwada-Amdura-Malkautha-Balegaon-Karegaon Phata-Babli Phata-Bellur to Naigaon to State Border MDR-83 in Nanded Dist
(Part of Nila Junction To Mugat Junction KM 0/0 to 14/815.2) Chaitanya Nagar Shiv Mandir to Asna Bridge Junction ( KM 00/000 to 03/515.3) Brahmanwada Bypass (KM 00/00 to 01/590) Total Length 19.920 KM) P
EPC-17 ADB ,Dist. Naded, Maharashtra
Water Absorption of Material (%) Today's Moisture in Material (%) Correction Required in Material (%)
31.5mm 20mm 10mm C Sand 31.5mm 20mm 10 mm C Sand 31.5mm 20mm 10 mm C Sand
Wt. of Material For one M3 in Kg. After Water Correction (As Per
Wt of Material For one M3 in Kg. (As Per Mix Design) in SSD Condition
Mix Design)
Admixt
Sr. No. Grade of Concrete W/C
ure (%) Admixtu Admixtu
Cement GGBS 31.5mm 20 mm 10mm C/ Sand Water Cement GGBS 31.5mm 20 mm 10mm C/ Sand Water
re re
1
2
3
4
5
6
7
8
Remarks:-
CORRECTION REPORT
:
:
:
:
:
Remarks
Comp.
S.NO. L x B x H (cm) Area (cm2) Volume Weight (Kg) Density Load (kN) Strength Average(N/mm2)
(Cc) (gm/cc)
(N/mm2)
Average Strength
Engineering Procurement & Constraction Mode , Improvement of Nila Junction-Brahmanwada-Amdura-Malkautha-Balegaon-Karegaon Phata-Babli Phata-Bellur to
Naigaon to State Border MDR-83 in Nanded Dist.1 (Part of Nila Junction To Mugat Junction KM 0/0 to 14/815.2) Chaitanya Nagar Shiv Mandir to Asna Bridge
Junction ( KM 00/000 to 03/515.3) Brahmanwada Bypass (KM 00/00 to 01/590) Total Length 19.920 KM) Pkg-EPC-17 ADB ,Dist. Naded, Maharashtra
Authority Engineer
WEIGHT OF
CONCRETE DENSITY SIZE OF SPAN Span Length Position of LOAD FLEXURAL AVERAGE
S. NO. Fracture STRENGTH FLEXURAL
BEAM
N/mm2 STRENGTH N/mm2
(gms) (gm/cc) L (MM) B (MM) D (MM) (l) mm 'a' ( mm ) P (KN)
9
AVERAGE FLEXURAL STRENGTH N/mm2
: :
31.5 100
26.5 85-95
19.0 68-88
9.5 45-65
4.750 30-55
0.600 8-30
0.150 5-15
0.075 0-5
Pan
Remarks:-
26.5 100
19.0 75-95
9.50 50-70
4.75 30-55
2.36 17-42
0.600 8-22
0.300 7-17
0.150 2-12
0.075 0-10
Pan
Remarks:-
(EPC Contractor's Rep) (Authority Engineer's Rep)
PUBLIC WORK DEPARTMENT, MAHARASHTRA
Engineering Procurement & Constraction Mode , Improvement of Nila Junction-Brahmanwada-Amdura-Malkautha-Balegaon-Karegaon Phata-Babli Phata-Bellur to Naigaon to State Border
MDR-83 in Nanded Dist.1 (Part of Nila Junction To Mugat Junction KM 0/0 to 14/815.2) Chaitanya Nagar Shiv Mandir to Asna Bridge Junction ( KM 00/000 to 03/515.3) Brahmanwada Bypass
(KM 00/00 to 01/590) Total Length 19.920 KM) Pkg-EPC-17 ADB ,Dist. Naded, Maharashtra
EGATE TEST
31.5mm C Sand 31.5mm C Sand
Location : Sampled by :
Layer : Tested by :
Specified Limit:-
Remarks:-
Location : Sampled by :
Source : Tested by :
63.0 50.0
50.0 40.0
40.0 31.5
31.5 25.0
25.0 20.0
20.0 16.0
16.0 12.5
12.5 10.0
10.0 6.3
Total A= B= C= D=
Combined FI and EI =
Remarks:-
Location : Sampled by :
Sl No Determination 1 2 3
1 Pycnometer Number
Remarks :-
CLEANLINESS TEST
Location of Lab. : Date of sampling :
31.5mm
Max 5% passing
0.075mm Sieve
Remarks:-
OIDS OF AGGREGATE
t Method : IS 2386 (Part III)1963
:
:
:
:
Test 2
OMPACTED)
OOSE)
ENT TEST
31.5mm C Sand 31.5mm C Sand
FINENESS OF CEMENT
TEST METHOD : IS 4031 (Part 1 )
Location of Laboratory : Date of Sampling :
Sl. No. Sample Taken Retained on 90 micron sieve (g) Fineness % Average % Specified limit
(g)
2 Maximum 10%
Remarks :-
Is the penetration
Trial Wt. of Cement Wt. of Water (gm) Reading in mm of between 5 to 7 mm Remarks
No. (gm) (A) (B) VNA (Yes/No)
Mould No. Initial Distance in (mm) Final Distance in (mm) Difference in (mm)
SOUNDNESS (mm) :-
Remarks:-
OTHER
31.5mm C Sand 31.5mm C Sand
Engineering Procurement & Constraction Mode , Improvement of Nila Junction-Brahmanwada-Amdura-Malkautha-Balegaon-Karegaon Phata-Babli Phata-
Bellur to Naigaon to State Border MDR-83 in Nanded Dist.1 (Part of Nila Junction To Mugat Junction KM 0/0 to 14/815.2) Chaitanya Nagar Shiv Mandir to
Asna Bridge Junction ( KM 00/000 to 03/515.3) Brahmanwada Bypass (KM 00/00 to 01/590) Total Length 19.920 KM) Pkg-EPC-17 ADB ,Dist. Naded,
Maharashtra
Authority Engineer
Texture Depth
As per MORTH (Section 600),TEST METHOD : TABLE NO. 600-5
Remarks:
Engineering Procurement & Constraction Mode , Improvement of Nila Junction-Brahmanwada-Amdura-Malkautha-Balegaon-Karegaon Phata-Babli Phata-Bellur to Naigaon to
State Border MDR-83 in Nanded Dist.1 (Part of Nila Junction To Mugat Junction KM 0/0 to 14/815.2) Chaitanya Nagar Shiv Mandir to Asna Bridge Junction ( KM 00/000 to
03/515.3) Brahmanwada Bypass (KM 00/00 to 01/590) Total Length 19.920 KM) Pkg-EPC-17 ADB ,Dist. Naded, Maharashtra