Professional Documents
Culture Documents
AER Chem Compat Chart
AER Chem Compat Chart
AER Chem Compat Chart
Fluid compatibility
Thermoplastic elastomer
Thermoplastic elastomer
Special application hose
Synthetic rubber
Stainless steel
Stainless steel
Aluminum
Aluminum
Neoprene
Neoprene
Urethane
Urethane
E=Excellent E=Excellent
Buna-N
Buna-N
Monel‡
Monel‡
Hytrel†
Hytrel†
Viton*
Viton*
G=Good EPDM G=Good
EPDM
Brass
Brass
Steel
Steel
PTFE
PTFE
AQP
AQP
C=Conditional C=Conditional
EPR
EPR
U =Unsatisfactory U =Unsatisfactory
1 2 3 4 5 6 1 2 3 4 5 6
Fluid Hose Seals Metal Fluid Hose Seals Metal
Acetaldehyde U E C U - G U C C U U G G E E E E Ammonium
phosphate, E E C U - E E E E - G C U C G U G
Acetic acid, 10% U E C C - E U U E G U C U U C C U 10% aq
Acetic acid, Ammonium E E C U - E E E E U G C U U G U G
U E C C - E U U C U U C U U C C C
glacial sulfate/sulfide,
10% aq
Acetone U E G U - E U U G U U G E E E E E
Amyl acetate U E U U - E U U G U U U E E E E E
Acetophenone U E - U - E U U E U U - E E E C E
Amyl alcohol G E E C - E G C E G C E G G E U G
Acetyl acetone U E U U - E U U G U U G U C C C C
Aniline, U E U U - E U U G U U U E U E G G
Acetyl chloride U E U U - U U U U E U U C C C U E aniline oil
Acetylene1 G E G G - E U U G E G G E E E E E Aniline dyes U E U U - E U G G G U U U C G C G
Air, hot (up to Asphalt, < 200°F C E G G - U G C U E G G E G E C E
E E E E - E E E E E E E E E E E E
+160°F)1
IRM 901 E E E E - U E E C E E E E E E E E
Air, hot C E U E - E G G E E G G E E E E E
(161°F – 200°F)1 ASTM #2 E E E E - U E G U E G E E E E E E
Air, hot IRM 903 E E E E - U E G U E G E E E E E E
U E U C - G U U G E U U E E E E E
(201°F – 300°F)1
Automatic trans. G E G G - U E G U E C G E E E E E
Air wet, below fluid 2
E E C E - E E E E E G C U G E E E
160°F1
Barium E E C C - E E E E E G C U G G G G
Aluminum chloride,
E E E E - E E E E E G E U U U U U 10% aq
chloride, 10% aq
Aluminum Barium E E G C - E E E E E E G G U G U G
E E E U - E E E E E G E U U U E C hydroxide, 105
fluoride, 10% aq
aq
Aluminum E E E C - E E E E E G E U U C C C Barium sulfide, E E C C - E E E E E G C C U G U U
nitrate, 10% aq
10% aq
Aluminum E E G E - E E E E E - G U C E C C Benzene, benzol U E U U - U U U U E U C G E E G E
sulfate, 10% aq
Alums, 10% aq E E E E - E E E E E E E U C E C C Benzoic acid U E C U - U U U E E C C U G G G G
A
Thermoplastic elastomer
Thermoplastic elastomer
Special application hose
Synthetic rubber
Stainless steel
Stainless steel
Aluminum
Aluminum
Neoprene
Neoprene
Urethane
Urethane
E=Excellent E=Excellent
Buna-N
Buna-N
Monel‡
Monel‡
G=Good G=Good
Hytrel†
Hytrel†
Viton*
Viton*
EPDM
EPDM
Brass
Brass
Steel
Steel
PTFE
PTFE
C=Conditional C=Conditional
AQP
AQP
EPR
EPR
U =Unsatisfactory U =Unsatisfactory
1 2 3 4 5 6 1 2 3 4 5 6
Fluid Hose Seals Metal Fluid Hose Seals Metal
Thermoplastic elastomer
Thermoplastic elastomer
Special application hose
Synthetic rubber
Stainless steel
Stainless steel
Aluminum
Aluminum
Neoprene
Neoprene
Urethane
Urethane
E=Excellent E=Excellent
Buna-N
Buna-N
Monel‡
Monel‡
G=Good G=Good
Hytrel†
Hytrel†
Viton*
Viton*
EPDM
EPDM
Brass
Brass
Steel
Steel
PTFE
PTFE
C=Conditional C=Conditional
AQP
AQP
EPR
EPR
U =Unsatisfactory U =Unsatisfactory
1 2 3 4 5 6 1 2 3 4 5 6
Fluid Hose Seals Metal Fluid Hose Seals Metal
Ferric Hydrobromic
chloride, E E - G - E E G E E - - U U U U U U E U E - G U U E E U U E U E E U
10% aq acid
Gasohol 2 G E G C - U G G U E E E E E E G E Isocyanate U E U U - U U U G E U U G - G - -
A
Thermoplastic elastomer
Thermoplastic elastomer
Special application hose
Synthetic rubber
Stainless steel
Stainless steel
Aluminum
Aluminum
Neoprene
Neoprene
Urethane
Urethane
E=Excellent E=Excellent
Buna-N
Buna-N
Monel‡
Monel‡
G=Good G=Good
Hytrel†
Hytrel†
Viton*
Viton*
EPDM
EPDM
Brass
Brass
Steel
Steel
PTFE
PTFE
C=Conditional C=Conditional
AQP
AQP
EPR
EPR
U =Unsatisfactory U =Unsatisfactory
1 2 3 4 5 6 1 2 3 4 5 6
Fluid Hose Seals Metal Fluid Hose Seals Metal
MIL-H-5606 E E E E - U E G U E E E E E E E E Per- U E U U - U U U U E U U C G G G E
chloroethylene
MIL-H-6083 E E E E - U E E U E E E E E E - E
Petroleum base G E E E - U E G U E E E E E E E E
MIL-L-7808 G E G G - U G U U E G G G G E - - oils
MIL-L-23699 E E - G - U G U U E - - E E E E E Phenol U E U U - U U U G E U U U E E E G
(carbolic acid)
MIL-H-46170 G E - G - C E G U E - - E E E - E
Phosphate ester 2 U E C U - E U U G C U G E E E E E
MIL-H-83282 G E - G - U E U U E - - E E E - E
Phosphoric acid U E U U - E U U G E U U U E U C E
Mineral oils E E G E - U E G U E G G E E E E E 20%
Naphtha C E G E - U C U U E C G - - - - - Phosphorous U E U U - E U U E E U U C U C E E
Naphthalene U E U U - U U U U E C G E G E G G trichloride
Thermoplastic elastomer
Thermoplastic elastomer
Special application hose
Synthetic rubber
Stainless steel
Stainless steel
Aluminum
Aluminum
Neoprene
Neoprene
Urethane
Urethane
E=Excellent E=Excellent
Buna-N
Buna-N
Monel‡
Monel‡
G=Good G=Good
Hytrel†
Hytrel†
Viton*
Viton*
EPDM
EPDM
Brass
Brass
Steel
Steel
PTFE
PTFE
C=Conditional C=Conditional
AQP
AQP
EPR
EPR
U =Unsatisfactory U =Unsatisfactory
1 2 3 4 5 6 1 2 3 4 5 6
Fluid Hose Seals Metal Fluid Hose Seals Metal
Stainless steel
have included maximum fluid temperature recommendations
for the six hose classifications on page A-15 (1 through 6). Two
Aluminum
Neoprene
Urethane
E=Excellent maximum fluid temperature ratings are listed under designations
Buna-N
Monel‡
G=Good
Hytrel†
Viton*
EPDM
of “H” and “LP”. The “H” designation is for hydraulic service up
Brass
Steel
PTFE
C=Conditional
AQP
EPR
U =Unsatisfactory to the maximum rated operating pressure of any particular hose
in the classification. The “LP” designation is for low-pressure
1 2 3 4 5 6 service such as lubricating oil systems or low-pressure hydraulic
Fluid Hose Seals Metal return lines. The letter “U” in the box indicates unsatisfactory
resistance to the fluid type. Fluid temperature ratings are
Trichlorethylene U E U U - U U U U E U U E G E E E predicated on maximum allowable ambient temperatures
Tricresyl U E U U - E U U E G U U E - C - G as follows:
Phosphate
Classifications 1 and 3
Triethanolamine G E U G - E E U E U U U E U E E E
(Synthetic rubber and thermoplastic elastomer)
Tung Oil E E C C - U G G U E U C E G E E E
“H” fluid temp. ratings: +140°F ambient
Turpentine E E G G - U G U U E G G G G G G G
“LP” fluid temp. ratings: +180°F ambient
Varnish C E G G - U G U U E G G E G E E E
Classification 2 (PTFE)
Vinyl Chloride U E U U - U U U U E U U E U C E E “H” fluid temp. ratings: +400°F ambient
Water (to E E E G - E E E E E E E C G E G E “LP” fluid temp ratings: +400°F ambient
+150°F)
Water (+151°F to C E U C - E E E E E U U C G E G E Classification 4 (AQP)
+200°F) “H” fluid temp. ratings: +160°F ambient
Water (+201°F U E U U - E U U G G U U C G E G E “LP” fluid temp. ratings: +250°F ambient
to +350°F)
(If “H” fluid temperature is +225°F or less, allowable
Water Glycol E E C E - E E E E E C C E E E G E ambient temperature may be increased to +200°F)
Water Petroleum E E C C - U E G U E C C C E E G E Ambient temperatures in excess of those recommended,
Emulsion2
in conjunction with maximum fluid temperatures, can
Xylene U E C U - U U U U E U C E E E E E materially shorten the service life of the hose.
Zinc Chloride, E E E E - E E E E E E E E U U C G
10% aq
Zinc Sulfate, E E - E - E E E E E - - U C G C G Caution: The fluid manufacturer’s recommended maximum
10% aq operating temperature for any specific name brand fluid
should be scrupulously observed by the user. These
Resistance key rating recommended temperatures can vary widely between name
E =Excellent – Fluid has little or no effect. brands of different fluid compositions, even though they
G =Good – Fluid has minor to moderate effect. fall into the same generic “family” of fluids. Exceeding the
C = Conditional – Service conditions should be described to Eaton manufacturer’s recommended maximum temperature can
Aeroquip for determination of suitability for application. result in fluid breakdown, producing by-products that are
U = Unsatisfactory harmful to elastomeric products, as well as other materials
in the system. If a manufacturer’s recommended maximum
temperature for his specific fluid is lower than that for the
hose rating, it should take precedence over the hose rating for
service usage.
A Straight petroleum-base
Maximum fluid temperature recommendation.
See caution on page A-15 for maximum fluid temperatures and
limiting ambient temperatures.
Fluid name
Aircraft hydraulic oil AA DTE oils OC turbine oils Union ATF Dexron
Ambrex oils Duro Union ATF type F
Arco A.T.F. Dexron Duro AW Peaco oils Union C-2 fluid
Arco A.T.F. dDexron IV Pennbell oils Union C-P oil
Arco A.T.F. Yype F EP hydraulic oils Power-tran fluid Union custom motor oil
Arco fleet motor EP industrial oils Union gas engine oil
Arco H.T.F. C-2 fluid EP machine oils Quadroil series Union Guardol motor oil
Arco H.T.C. 100 fluid Energol HL68 Union heavy duty motor oil
Arco 303 fluid Energol HLP C68 Rando oils Union hydraulic oil AW
ATF special Etna oils Rando oils HD Union hydraulic tractor fluid
Automatic transmission Exxon ATF Redind oils Union premium motor oil
fluid (Dexron) Regal oils R & O Union S-1 motor oil
Factovis 52 – Conventional Rimula oils Union special motor oil
Carnea oils R & O hydraulic fluid Rotella oils Union super motor oil
Citgo amplex Rotella T oils Union torque correction fluid
Citgo ATF, type F Gulf harmony AW RPM Delo 200 motor oils Union turbine oil
Citgo ATF, Dexron Gulf security AW RPM Delo 300 motor oils Union turbine Oil XD
Citgo extra duty circulating Glide RPM Delo special motor oils Union Unax
oils mineral oil (Heavy duty)
(R & O) Rubilene Union Unax AW
Hulburt 27 series Union Unax R & O
Citgo motor oils
Hydraulic series Shell brand Union Unax RX
Citgo pacemaker series
mineral oil (R & O) Hydraulic oils Special motor oils Union Unitec motor oil
Citgo pacemaker t series Hydroil series Sun R & O oils Univis J13
mineral oil (R & O)
Suntac HP oils Univis J26
Citgo pacemaker XD series Industron 53 – anti wear
mineral oil (Heavy duty) Suntac WR oils Univis P32
hydraulic fluid
(R & O) Sunvis 700 oils
Citgo sentry Sunvis 800 oils Vactra oils
Lubrite motor 20W-40
Citgo tractor hydraulic fluid Sunvis 900 oils Vitrea oils
Conoco 303 fluid Super hydraulic oils
Mobil AFT 210
Custom motor oil Supreme motor oils Way lubricants
Mobil AFT 220
Mobilfluid 62
Dectol R & O oils Tellus oils XD-3 motor oils
Mobilfluid 423
Delo 400 motor oils Teresstic oils
Mobil hydraulic oils
Delvac oils Torque fluids
Mobiloil special
Delvac SHC Torque fluid 47
Mobiloil super 10W-40
Delvac special 10W-30 Torque fluid 56
Donax T oils Tractor hydraulic fluid
NUTO oils
Water and petroleum oil emulsion (fr) Water and glycol solution
Maximum fluid temperature recommendation. Maximum fluid temperature recommendation. A
See caution on page A-15 for maximum fluid temperatures and See caution on page A-15 for maximum fluid temperatures and
limiting ambient temperatures. limiting ambient temperatures.
Hose classifications (see page. A-15) Hose classifications (see page. A-15)
1 2 3 4 1 2 3 4
Hose classifications (see page. A-15) Hose classifications (see page. A-15)
1 2 3 4 6 1 2 3 4
Fyrquel 550
Pyrogard 51
Fyrquel 1000
Pyrogard 53
Fyrquel 150 R & O
Pyrogard 55
Fyrquel 220 R & O
Fyrquel 550 R & O
Safetytex 215
Skydraul 500A
Gulf FR Fluid P-37
Skydraul 7000
Gulf FR Fluid P-40
Gulf FR Fluid P-43
Univis P12
Gulf FR Fluid P-45
Gulf FR Fluid P-47
Hose classifications (see page. A-15) Hose classifications (see page. A-15)
1 2 3 4 1 2 3 4
Mineral oil Y Y Y Y
PAG Y Y Y Y
Ester oil Y Y Y Y
Alkylbenzene Y Y Y C*
* Contact your Eaton or Eaton Tech Support for additional information.
Y = Compatible N = Non-compatible C=Conditional