Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 2

SAGI RAMA KRISHNAM RAJU ENGINEERING COLLEGE (A)

CHINNAAMIRAM: BHIMAVARAM-534204
DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING
ASSIGNMENT-1

Academic Year: 2022-2023 Year/Semester: II/II Sections: A,B,C


Name of the Course: EPGTD Course Code:B20EE2202
Subject Teachers: Dr.MSVR,MECVS Course Coordinator: MECVS Max.Marks: 50

M CO KL
UNIT-I
1 Describe the important components of a Thermal power station. 5 CO1 K2

2 Describe the working of nuclear reactor and explain it’s components. 5 CO1 K2

3 Define and explain the importance of the following terms in 5 CO1 K3


generation:
i) connected load ii) maximum demand iii) demand factor
iv) average load v) load factor vi) diversity factor
vii) plant capacity factor
4 a) Explain two part tariff and three part tariff. 5 CO1 K2

b) Calculate annual bill of a consumer whose maximum demand is 5 CO1 K3


100kW, power factor = 0.8 lagging and load factor = 50%. The tariff
used is Rs 75 per of maximum demand plus 20 paise per kWh
consumed.
UNIT-II

5 Compare the volume of conductor material required for a d.c. 2-wire 5 CO2 K3
system and 3-phase, 3-wire system on the basis of equal maximum
potential difference between one conductor and earth. Make suitable
assumptions.

6 Compare AC transmission and DC transmission. 5 CO2 K3

7 A 2 wire DC distributor ABCDEA in the form of a ring main is fed at 5 CO2 K3


point ‘A’ at 230V and is loaded as follows: 20A at B, 40A at C, 60A
at D and 20A at E. The resistances of various sections (ground and
return) are AB = 0.1Ω, BC = 0.05Ω, CD = 0.01Ω, DE = 0.025Ω and
EA = 0.075Ω. Determine the point of minimum potential and current
in each section of distributor.
8 State and prove Kelvin’s law for size of conductor for transmission. 5 CO2 K3
Discuss its Limitations.
UNIT-III

9 Derive the expression for inductance in single phase transmission line. 5 CO2 K3

10 A single phase line has two parallel conductors 2 metres apart. The 5 CO2 K3

Signature of the Course Coordinator


Date:
diameter of each conductor is 1·2 cm. Calculate the loop inductance
per km of the line

Signature of the Course Coordinator


Date:

You might also like