Job Title: Maintenance Engineer (Asset Integrity)
Reporting structure
Reports To:
Shipyard Facility & Maintenance Manager (SFMM)
Direct Reports:
‘Supervisor, Technicians
Job Summary and Purpose
The Maintenance Engineer (Al) is responsible for monitoring of Assets in line with Asset Integrity Management
System Procedure. This includes integrity of plant, facility, utility, mobilty, civil & marine infrastructures in the
NKOM yard and for the continual review and improvement of Asset Management Plans (AMP's). Monitoring of all
‘works shall be in line with industry best practice and in full compliance with company HSSEQ requirements.
Accountabilities
Key Accountabilities:
1) Responsible to implement Asset Integrity policies and procedure for all NKOM yard equipment’.
2) Responsible to conduct IIR/RCA report for all the Incidents/ Accidents / Damages / Breakdowns etc
3) Responsible to perform the Inspection, Condition Monitoring, Data Review and Analysis.
4) Provide monthly Asset Integrity status reports.
5) Identify the root causes for the Asset integrity deterioration.
6) Conduct Asset integrity, Risk assessment, Risk Reduction for critical assets.
7) Suggest improvements and coordinate for management approvals.
8) Review the yard equipment's maintenance works, maintenance reports and perform the gap analysis to
improve the maintenance regime, maintenance plan (Predictive Maintenance (PDM), Proactive
Maintenance(PROM), Plan Preventive Maintenance (PPM), Condition Based maintenance(CBM) for the
equipment’s
9) Assist and advise Head of Maintenance in the preparation of maintenance strategies to reduce failure rates of
equipment and improve maintenance KPI
10) Prepare IIRJRCA reports and provide to Head of Plant and Maintenance with proposals for corrective action
& preventive action (CAPA) and Lessons learned action (LLA) to recurrence of failures and ensuring lessons
learned
11) To provide technical support to optimize the for PM&S SAP plan for PM, CM, BDM, REFM, Tum Around and
shutdown maintenance
12) To provide technical support to optimize PM&S (OPEX, CPEX) Maintenance Cost.
13) Provide suggestion for best maintenance practices, methods, technologies and coordinate their
implementation for enhancing the integrity at an optimum cost.
14) Coordinate with relevant Authority and obtain approvals of MOC for any changes to systems and structures.
15) Communicate upwards for Training needs, Process Improvement Suggestions and follow up on
implementation
16) Demonstrate work behaviors consistent with company values and work within company policies, standards,
procedures, and any legislative requirements.
17) Adhere to health, safety, security and environmental policies, procedures, instructions, and controls for the
safety of self and others.
18) Ensure compliance to quality management procedures and controls to deliver high quality services and
products.
19) Follow all the safety procedures and report lapses, if any.
20) Perform any other assigned duties and responsibilities.
Accountabil
Accountabil
Accountal
CompetenciesAchievement Oriented
Collaboration & Teamwork
Customer Centricity
Drive Vision
Empower & Nurture Talent
Interactive Communication
Solution Oriented
Key Result Areas
System availabilty for operational effectiveness.
Equipment - Reliabilly, Availability, Maintainabilty, MTTR, MTBF,
Optimize cost for Plant, maintenance, and services.
MOC for Improvements.
Safety-zero harm.
Interactions and Working Relations
Internal: All P&M Staff, Operations Sections in N-KOM, HSSEQ Sections.
Purpose: To complete assigned jobs for departments as dispatched per operational need.
External: Asset integrity Management Consultants, CBM Consultants and External Services/Specialist
Contractors
Purpose: To acquire knowledge and skills from Asset Integrity Management (AIM) Consultants, CBM Consultants
and Specialists in implementation of AIM and CBM best practices,
Financial Authorities
As per TOFA
Qualification:
Qualification:
+ 4 Years of Engineering Degree in Electrical / Mechanical
Experience:
+10 years of relevant experience as Electrical, Mechanical Maintenance Engineer, or equivalent.
+ Knowledge of fault finding and troubleshooting techniques.
+ Knowledge of Condition Monitoring and CBM for Plant, Machinery, Hydraulic systems, HVAC, Mechanical,
Electrical, 1&C Systems and Civil & Structural Systems
+ Ability to read engineering drawings and schematics.
+ Knowledge of electro-mechanical repair and maintenance.
+ Knowledge of Risk Assessment Procedure, Work Instruction, PTW System and LOTO System
+ Computer knowledge (of Microsoft Office/Word, Excel, Power point for preparation and presentation 1D, 1W,
1M, 1Y, Reports)
Experience and Job Skills
Job Specific Competencies:
. Behavioral Competencies
Drive Vision
Interactive Communication
Customer Centricity
Solution Oriented
Empower & Nurture Talents
Collaboration & Teamwork
Achievement Oriented
i. Technical Competencies
Commitment of NKOM Core Values.
Verbal Written and Communication Skills
Computer literacy (Microsoft Office/Excel/Power Point)
Coaching and Mentoring Skills.
Project Management Skills.
Knowledge of Shipyard Operations.
‘Time Management Skils.
Analytical Thinking Skils.
Budgeting/Business planning Skil.Presentation Skills.
Problem solving Skills.
Creativity
Read and comprehend Engineering Drawings and schematics.
Read and comprehend equipment manuals and international standards.
Understand Control Systems.
Ability to write technical reports
Ability to learn requirements and needs of new systems,