Professional Documents
Culture Documents
TB 63208
TB 63208
Affected products: all condenser and heat pump dryers produced in Yate
Factory (industrial code 95…).
In case of blocked drum that cannot manually rotate from the door side, please
proceed as follows:
BELT STATUS
As first step, dismantle the right side panel to verify the belt status.
BELT: OK
Verify the bottom status.
If the bottom is ok, skip to the 2nd step.
If the bottom is damaged during the transportation :
BUMP STOP: KO
BUMP STOP: OK
1
Technical Bulletin Profile: general
Issue: June 2016
TB0016 Compiled by: Cecilia Palazzi
Approved by: Gabriele Fioretti
Revision: 01
2
Technical Bulletin Profile: general
Issue: June 2016
TB0016 Compiled by: Cecilia Palazzi
Approved by: Gabriele Fioretti
Revision: 01
Verify if the drum is cemented to the rear panel, as you can see in the pictures above.