Professional Documents
Culture Documents
Full Syllabus Test-2 (Basic Level)
Full Syllabus Test-2 (Basic Level)
Full Syllabus Test-2 (Basic Level)
com/2019/student/profile/99544
Chandeshwar Kumar Ram
(Enroll User) Sign out
HOME
Q. 1
MY TEST
In this question, identify the pair out of given four options which has the same relationship as
SYMPHONY : COMPOSER?
BOOKMARKS Solution Video Have any Doubt ?
REPORTS
B Fake : Ordinary
BUY PACKAGE
OFFER Solution :
(c)
EXCLUSIVE OFFER FOR OTS As composer composes symphany, so painter paints fresco.
STUDENTS ONLY ON BOOK
PACKAGES
D Foreigner : Immigrant
QUESTION ANALYTICS
Q. 2
A subordinate
B socialist
C asylum
Solution :
(d)
Harbinger means ‘to give a slight indication beforehand or a forerunner of something’.
QUESTION ANALYTICS
Q. 3
Choose the correct sequence of the parts of the sentence so as to make a meaningful sentence:
P : Lok Sabha ahead of
Q : walk out in
R : opposition stages
S : no-confidence motion
Solution Video Have any Doubt ?
Solution :
(a)
B RQSP
C RSQP
D RSPQ
QUESTION ANALYTICS
Q. 4
In right angled triangle ABC with angle B 90 , lengths of the side AB 3 cm and of A point D is selected on side CA. What
is ratio of DC : AD such that BD is perpendicular to CA?
Chandeshwar Kumar Ram
Solution Video Have any Doubt ?
(Enroll User) Sign out
A 3:2
Solution :
Chandeshwar Kumar Ram (b)
Course: GATE
Mechanical Engineering (ME)
HOME
MY TEST
BOOKMARKS
MY PROFILE
REPORTS
BUY PACKAGE
ASK AN EXPERT
OFFER
C 5:2
D 2:1
QUESTION ANALYTICS
Q. 5
Solution :
2158
QUESTION ANALYTICS
Q. 6
A group of boys and girls know either French or Spanish. The number of boys and girls are in the ratio 1 : 4. 30% of the girls know Spanish
and the rest of them know French. On the other hand, 50% of the boys know Spanish and the rest of them know French. A student is chosen
at random from the group of students who knows Spanish. What is the probability that the chosen student is a girl?
Solution Video Have any Doubt ?
A
B Correct Option
Chandeshwar Kumar Ram
(Enroll User) Sign out
Solution :
(b)
HOME
MY TEST
C
BOOKMARKS
MY PROFILE
D
REPORTS
ASK AN EXPERT
Q. 7
OFFER
Gatimaan express departed from Delhi for Agra which is 200 km away. However, in order to cope up with the delay due to rainy season, it
EXCLUSIVE OFFER FOR OTS
departed 40 minutes earlier than the scheduled time of departure. With the speed of the train reduced by 50 km/hour as compared to the
STUDENTS ONLY ON BOOK
original speed, the train reached Agra as per original schedule. The original speed of the train will be
PACKAGES
FAQ Solution Video Have any Doubt ?
A 120 km/hr
Solution :
(b)
C 170 km/hr
D 210 km/hr
QUESTION ANALYTICS
Q. 8
is a polynomial function of second degree such that f (–4) = 8, f (1) = 8 and f (3) = 15. What is the point at which the graph of this
function intersects a line drawn parallel to y axis through
Solution Video Have any Doubt ?
A (2, 8)
B (2, 10)
C (2, –11)
Solution :
(d)
Chandeshwar Kumar Ram
QUESTION ANALYTICS (Enroll User) Sign out
Q. 9
Sanjay and Mahesh are playing a game of bowling. Probability of Sanjay hitting the strike is 0.5 whereas Mahesh hitting the strike is 0.4.
Sanjay wins if he hits the strike and Mahesh does not whereas Mahesh wins if he hits the strike and Sanjay does not. In the absence of
these two happenings, the game ends in a tie. What is the probability on the tie?
Chandeshwar Kumar Ram Solution Video Have any Doubt ?
Course: GATE
Mechanical Engineering (ME)
A 0.40
HOME
B 0.45
MY TEST
MY PROFILE Solution :
(c)
REPORTS
BUY PACKAGE
ASK AN EXPERT
OFFER
QUESTION ANALYTICS
Q. 10
A square and a regular octagon have identical perimeter. The ratio of the areas of the square and the octagon is _____________.
FAQ Solution Video Have any Doubt ?
Solution :
0.828 (0.827 - 0.829)
Chandeshwar Kumar Ram
(Enroll User) Sign out
QUESTION ANALYTICS
Q. 11
Chandeshwar Kumar Ram What is the amount of power required to pump water to a discharge height of 30 m? The diameter of pipe is 200 mm and flow rate needs to
Course: GATE
be maintained at 50 × 10–3 m3/s. Assume Darcy’s friction coefficient = 0.02 and minor losses in suction pipe is 1.3 timer the dynamic lead
Mechanical Engineering (ME) at discharge. Length of pipe = 100 m
FAQ Have any Doubt ?
HOME
A 20.6 kW
MY TEST
MY PROFILE Solution :
(b)
REPORTS
BUY PACKAGE
ASK AN EXPERT
OFFER
C 10.8 kW
D 5 kW
QUESTION ANALYTICS
Q. 12
In a steam power plant the steam entry condition to turbine is P = 4 MPa, T = 400°C, h = 3213.6 kJ/kg and The steam
condition at turbine exit is P = 3.5 MPa, T = 392°C, h = 3202.6 kJ/kg and From the turbine a heat loss of 8.5 kJ/kg is
observed. What is the steam flow rate ? Assume diameter of pipe = 0.2 m
FAQ Have any Doubt ?
Solution :
(a)
B 40.2 kg/s
C 45.3 kg/s
D 112.1 kg/s
Chandeshwar Kumar Ram
QUESTION ANALYTICS (Enroll User) Sign out
Q. 13
Each of the two uniform hinged bars are of length and mass ‘m’ as shown below. What is the angle θ for a force P = 25 N? Given m = 5
kg, g = 10 m/s2,
MY TEST A 45°
BOOKMARKS
B 90° Correct Option
MY PROFILE
Solution :
REPORTS (b)
BUY PACKAGE
ASK AN EXPERT
OFFER
C 60°
D 30°
QUESTION ANALYTICS
Q. 14
Solution :
(a)
B 2 and 4
C 1 and 3
D 1 and 4
QUESTION ANALYTICS
Q. 15
An absorption refrigeration system having evaporator temperature of –5°C and ambient temperature of 25°C. The heat is supplied to
Chandeshwar Kumar Ram
generator from steam at 0.1 MPa, 0.95 quality. The saturated temperature of steam at 0.1 MPa is 100°C and hfg = 2000 kJ/kg. What is the
(Enroll User) Sign out
steam flow rate required if the actual COP is 80% of maximum COP and the refrigerator effect is 60 kW?
FAQ Have any Doubt ?
A 0.041 kg/s
B 0.01 kg/s
Chandeshwar Kumar Ram
Course: GATE
C 0.022 kg/s Correct Option
Mechanical Engineering (ME)
HOME Solution :
(c)
MY TEST
BOOKMARKS
MY PROFILE
REPORTS
BUY PACKAGE
ASK AN EXPERT
OFFER
QUESTION ANALYTICS
Q. 16
A structural member subjected to plane stress condition with stress shown below. Material yield strength is 18 MPa. What is the factor of
safety for the design using Tresca’s failure theory?
A 3.6
B 2.6
Solution :
(c)
Chandeshwar Kumar Ram
(Enroll User) Sign out
D 4.64
HOME Q. 17
As shown in figure the rigid link ABC moves to a new position A′B′C′ the end A moves 40 cm left at a constant velocity 10 cm/sec. What is
MY TEST the average angular velocity of arm BC during this internal?
BOOKMARKS
MY PROFILE
REPORTS
BUY PACKAGE
ASK AN EXPERT
A 0.493
EXCLUSIVE OFFER FOR OTS
STUDENTS ONLY ON BOOK
PACKAGES
B 0.393 Correct Option
Solution :
(b)
C 0.539
D 0.593
QUESTION ANALYTICS
Q. 18
An epicyclic gear train as shown in figure with compounded planet B-C. Shaft X is connected with arm. B has 15 teeth and mashes with an
annulus A which has 60 teeth. C has 20 teeth and meshes with sun wheel D which is fixed. Shaft X rotates freely inside sun D. The annulus
is hinged with shaft Y which rotates at 740 rpm. What is the speed of shaft
A 1268.57 rpm
Solution :
(b)
Chandeshwar Kumar Ram
(Enroll User) Sign out
MY TEST
QUESTION ANALYTICS
BOOKMARKS
MY PROFILE Q. 19
A cylindrical vessel is made of steel with inside diameter 2 m. Thickness of wall is 40 mm and consider the pressure vessel as thin walled.
REPORTS
The vessel is subjected to internal pressure of 3.5 kPa. Also an axial tensile load of 200 kN is applied on the vessel. What is the hoop strain
at a point on the surface of cylindrical vessel ?
BUY PACKAGE Esteel = 200 GPa
Gsteel = 80 GPa
ASK AN EXPERT
Have any Doubt ?
OFFER
A 3.83 × 10–7
EXCLUSIVE OFFER FOR OTS
STUDENTS ONLY ON BOOK
PACKAGES
B 1.75 × 10–7
Solution :
(c)
D –3.83 × 10–7
QUESTION ANALYTICS
Q. 20
A concentric spring having two helical springs one inside the other with same axis. The wire diameter of each spring is 10 mm and 15 mm
respectively. Both the spring have same spring index C = 5. If a load of 100 kN is applied on the spring. What is the ratio of load on each
spring? (Both have same solid length and same free length)
FAQ Have any Doubt ?
A 0.666
B 0.444
C 0.555
Solution :
(d)
Chandeshwar Kumar Ram
(Enroll User) Sign out
HOME
MY TEST
BOOKMARKS
MY PROFILE
REPORTS
QUESTION ANALYTICS
BUY PACKAGE
ASK AN EXPERT Q. 21
A 500 kg weight is supported by two wire as shown below. The wire has yield strength of 200 MPa. What is the rod diameter for a factor of
OFFER
safety 2? (g = 10 m/s2)
EXCLUSIVE OFFER FOR OTS
STUDENTS ONLY ON BOOK
PACKAGES
A 5.15 mm
Solution :
(b)
C 6.15 mm
D 8.28 mm
QUESTION ANALYTICS
Q. 22
A thin plate is placed inside narrow gap of height ‘a’. The gap filled with oil of viscosity μ1 at bottom, and oil of viscosity μ2 at top. Position
of plate from bottom if the drag is minimum.
V = velocity of plate
Have any Doubt ?
A
Chandeshwar Kumar Ram
(Enroll User) Sign out
HOME
MY TEST
Solution :
(d)
BOOKMARKS
MY PROFILE
REPORTS
BUY PACKAGE
ASK AN EXPERT
OFFER
QUESTION ANALYTICS
Q. 23
A centrifugal air compressor of impeller diameter 0.6 m runs at a speed of 6000 rpm. Air enters the compressor at atmospheric
temperature of 298 K. Slip factor = 0.8, power factor = 1, cP air = 1.005 kJ/kg,
What is the pressure ratio developed if the isentropic efficiency is 90%?
Have any Doubt ?
A 1.66
Solution :
(b)
Chandeshwar Kumar Ram
(Enroll User) Sign out
HOME
C 2.00
MY TEST
D 2.30
BOOKMARKS
MY PROFILE
QUESTION ANALYTICS
REPORTS
BUY PACKAGE Q. 24
D e Correct Option
Solution :
(d)
QUESTION ANALYTICS
Q. 25
B Correct Option
Solution :
(b)
Chandeshwar Kumar Ram
(Enroll User) Sign out
HOME
MY TEST
BOOKMARKS
MY PROFILE
REPORTS
C
BUY PACKAGE
ASK AN EXPERT D
OFFER
Q. 26
A stainless steel wire is 3 mm in diameter and 1 m in length. The resistivity of steel is 70 μΩ-cm. A current of 200A is passed through the
rod. The wire is submerged in a liquid at 110°C. heat transfer coefficient is given by 4000 W/m2K, k = 19 W/mK. The center temperature of
the wire is equal to ________°C.
FAQ Have any Doubt ?
Solution :
231.62 (230 - 234)
Chandeshwar Kumar Ram
(Enroll User) Sign out
HOME Q. 27
MY TEST A solid cylinder of radius 1 m is rotating inside a hollow cylinder of inside radius 2 m. Length of cylinder is 1 m each. Outside cylinder is
fixed. The gap between the cylinder is filled with oil of dynamic viscosity 1 N-s/m2. Amount of torque required to rotate inside cylinder at
constant speed of ω = 10 rad/s is ________ N-m. Assume torque remains constant with radius.
BOOKMARKS
FAQ Have any Doubt ?
MY PROFILE
125.66 (125 - 126) Correct Option
REPORTS
Solution :
BUY PACKAGE 125.66 (125 - 126)
ASK AN EXPERT
OFFER
QUESTION ANALYTICS
Q. 28
A manufacturing process can be done in 3 ways. The details of each process is given in the table below.
The span of the production volume for which process 2 gives most economical i.e. least cost is ________ units.
Have any Doubt ?
Solution :
18750 (18740 - 18760)
QUESTION ANALYTICS
Chandeshwar Kumar Ram
Q. 29
(Enroll User) Sign out
A firm manufactures a product for which the annual demand of inventory is 50000 units. The percentage change in EOQ for 50% increase in
is ___________%.
HOME
MY TEST
BOOKMARKS
MY PROFILE
REPORTS
BUY PACKAGE
OFFER
Q. 30
EXCLUSIVE OFFER FOR OTS
STUDENTS ONLY ON BOOK A ceramic part is produced which requires drying and firing process respectively. The shrinkage during drying and firing are 5% and 4%
PACKAGES respectively (band a dried dimension). If the required dimension of final part is 30 mm. The initial length of the part is________mm.
FAQ Have any Doubt ?
Solution :
32.895 (32.85 - 32.95)
QUESTION ANALYTICS
Q. 31
In a cutting operation having rake angle 10°. The cutting force FC = 1330 N and thrust force = 740 N. When a cutting fluid is used there then
forces reduces to value 1000 N and 700 N. The magnitude of change of friction angle is ________degree.
Have any Doubt ?
Solution :
5.9 (5.8 - 6.0)
Chandeshwar Kumar Ram
(Enroll User) Sign out
QUESTION ANALYTICS
Q. 32
Chandeshwar Kumar Ram
Course: GATE To drill a hole a double helical/fluted drilling machine is used with a 15 mm drill bit at a feed of 0.5 mm/rev. The spindle speed is 1000 rpm.
Mechanical Engineering (ME) The material removal rate is ________ mm3/s.
FAQ Have any Doubt ?
HOME
2945.24 (2940 - 2950) Correct Option
MY TEST
Solution :
BOOKMARKS 2945.24 (2940 - 2950)
MY PROFILE
REPORTS
BUY PACKAGE
ASK AN EXPERT
OFFER
Q. 33
A bar having different cross section is loaded as shown below. The cross section area of span AB, BC and CD are 400 mm2, 200 mm2 and
100 mm2. The total change in length of bar is________mm. (Take E = 200 GPa)
Solution :
1.4 (1.38 - 1.42)
QUESTION ANALYTICS
Q. 34
A government official finds that on an average 16% of tender applications received are rejected because they are either incomplete or
incorrect. The probability that a file containing 8 tender applications will face at least one rejection is __________.
Have any Doubt ?
Solution :
0.7521 (0.73 - 0.77)
Chandeshwar Kumar Ram
(Enroll User) Sign out
QUESTION ANALYTICS
MY TEST
Solution :
BOOKMARKS 0.2
MY PROFILE
REPORTS
BUY PACKAGE
ASK AN EXPERT
OFFER
Q. 36
In an engine the clearance volume is filled with air of mass mc kg at and h1. An amount of kg fuel is taken into the cylinder
through intake valve. After the intake process the state is and h2. In the supply pipe the state of gas is and hp. What is
the heat transferred from the gas during intake process?
P = Pressure, u = internal energy, h = enthalpy, = speed.
Have any Doubt ?
D Correct Option
Solution :
(d)
QUESTION ANALYTICS
Q. 37
A clearance fit is obtained between a shaft and a hole in a limit system. The fit is represented as 100 F8h10. Step range for 100 mm is 80-
120 mm. Fundamental deviation for F is 5.5 D0.4f. Take standard tollerance grades of IT8 and IT10 as and respectively.
What is maximum clearance for the fit ?
Have any Doubt ?
Chandeshwar Kumar Ram
0.33 mm (Enroll User) Sign out
A
B 0.43 mm
C 0.13 mm
Solution :
HOME (d)
MY TEST
BOOKMARKS
MY PROFILE
REPORTS
BUY PACKAGE
ASK AN EXPERT
QUESTION ANALYTICS
OFFER
C Correct Option
Solution :
(c)
D
Chandeshwar Kumar Ram
QUESTION ANALYTICS (Enroll User) Sign out
Q. 39
A cylindrical pressure vessel is joined by lap joint. Pressure inside vessel is 10 MPa. The inner diameter is 100 mm and thickness is 16 mm.
What are the number of rivets required per unit length if diameter of rivet is 25 mm and yield shear stress is 200 MPa? (Take FOS = 2)
Have any Doubt ?
Chandeshwar Kumar Ram
Course: GATE 35
A
Mechanical Engineering (ME)
MY TEST Solution :
(b)
BOOKMARKS
MY PROFILE
REPORTS
BUY PACKAGE
ASK AN EXPERT
OFFER
C 16
D 18
QUESTION ANALYTICS
Q. 40
A bar undergoes under plane stress condition. What is the shear stress at this point if the normal stresses are
MPa and the normal stress at plane a - b is – 60 MPa?
Solution :
(a)
B +28 MPa
C –25 MPa
D +34.25 MPa
QUESTION ANALYTICS
Q. 41
A steel rod of 25 mm diameter if subjected to a torque T at free end and the other end is fixed. If theChandeshwar ‘a’ and Ram
strain gaugesKumar ‘b’ on the bar
shows the readings as εa = –10–3, εb = +10–3. What is the value of torque T? (Given, G = 80 GPa) (Enroll User) Sign out
MY TEST Solution :
(b)
BOOKMARKS
MY PROFILE
REPORTS
BUY PACKAGE
ASK AN EXPERT
OFFER
C 450.6 N-m
D 510.8 N-m
QUESTION ANALYTICS
Q. 42
Two involute gears of pressure angle 20°. The data for gear and pinion are given as below
Gear:
Addendum circle radius = RA = 105 mm
Pitch circle radius = R = 100 mm
Pinion:
Addendum circle radius = rA = 55 mm
Pitch circle radius = r = 50 mm
Assuming addendum as standard and equal to one module.
What is the angle turned by pinion wheel when only one pair of teeth is in mesh?
Have any Doubt ?
A 29.44°
Solution :
(b)
C 18.695°
D 20.44°
Chandeshwar Kumar Ram
QUESTION ANALYTICS (Enroll User) Sign out
Q. 43
Two blocks each of mass ‘m’ are attached to the spring as shown in figure below. What is the frequency of oscillation? Take stiffness of
each spring = k.
A
HOME
MY TEST
B
BOOKMARKS
MY PROFILE
C Correct Option
REPORTS
BUY PACKAGE
Solution :
(c)
ASK AN EXPERT
OFFER
QUESTION ANALYTICS
Q. 44
A shaft carrying pulley B is simply supported at end A and C by bearing. (See figure below).
The weight of pulley B is 8 kN. What is the L40 life of bearing in million revolution if dynamic load capacity is 25 kN and bearing used is ball
bearing?
FAQ Have any Doubt ?
A 532 MRev
Solution :
(b)
Chandeshwar Kumar Ram
(Enroll User) Sign out
HOME
MY TEST
BOOKMARKS
C 472 MRev
MY PROFILE
D 452 MRev
REPORTS
ASK AN EXPERT
Q. 45
OFFER
In the given figure below three monkeys (A, B, C) with weight mA = 10 kg, mB = 15 kg, mC = 5 kg are climbing up and down the rope.
EXCLUSIVE OFFER FOR OTS
Monkey A is descending down the rope with acceleration 5 m/sec2. Monkey B is climbing up with a constant speed 2 m/sec.
STUDENTS ONLY ON BOOK
PACKAGES
Monkey C is moving up with acceleration 3 m/s2. What is the tension in rope ‘D’? (g = 10 m/s2)
Have any Doubt ?
Solution :
(a)
B 300 N
C 315 N
D 150 N
QUESTION ANALYTICS
Q. 46
The pendulum of an izod impact testing machine has CG 1.05 m from the axis of rotation and striking knife is 150 mm below the CG. The
time for 20 small free oscillation is 43.5 seconds. Determine the position of centre of percussion relative to the striking knife? (g = 9.81
m/s2)
Have any Doubt ?
A 0.02 m
B 0.03 m
HOME
MY TEST
BOOKMARKS
MY PROFILE
REPORTS
BUY PACKAGE
ASK AN EXPERT
D 0.04 m
OFFER
QUESTION ANALYTICS
EXCLUSIVE OFFER FOR OTS
STUDENTS ONLY ON BOOK
PACKAGES
Q. 47
A vertical bar ABC is attached to a rigid bar BDF, as shown in figure. What is the ratio of loads, P1 and P2 so that the vertical deflection of
point C becomes zero?
A 2.5
B 2.0
C 1.0
Solution :
(d)
Chandeshwar Kumar Ram
(Enroll User) Sign out
HOME
MY TEST
BOOKMARKS
REPORTS
BUY PACKAGE Q. 48
As shown in figure a load P of 50 kN is applied at ‘B’. What is the change in length of bar AC having diameter 60 mm and E = 200 GPa? The
ASK AN EXPERT bars AB and BC are rigid.
OFFER
A 0.563 mm
B 0.333 mm
Solution :
(c)
Chandeshwar Kumar Ram
(Enroll User) Sign out
D 0.453 mm
HOME
Q. 49
MY TEST A compressor is used to compress the air from inlet condition at 1 bar and 300 K to exit condition at 7 bar and 600 K. The air flow rate is 2
kg/s. There is heat loss from compressor at the rate of 50 kW at 290 K. Determine the net rate of availability transfer.
BOOKMARKS Take cP = 1.005 kJ/kgK, T0 = 290 K. (Neglect KE and PE)
Have any Doubt ?
MY PROFILE
A 572.9 kW
REPORTS
B 4729.9 kW
BUY PACKAGE
OFFER
Solution :
(c)
EXCLUSIVE OFFER FOR OTS
STUDENTS ONLY ON BOOK
PACKAGES
D 578.6 kW
QUESTION ANALYTICS
Q. 50
If –8 and 5 are the eigen value of a non-sengular matrix A, then the eigen values of adj A are
Have any Doubt ?
A 16, –10
B –5, 8
C 5, –8 Correct Option
Solution :
(c)
Chandeshwar Kumar Ram
(Enroll User) Sign out
D –16, 10
Course: GATE
Mechanical Engineering (ME)
Q. 51
HOME
Iterative function for calculating (N)1/2N by Newton-Raphson method is
Have any Doubt ?
MY TEST
BOOKMARKS A
MY PROFILE
REPORTS B
BUY PACKAGE
C
ASK AN EXPERT
QUESTION ANALYTICS
Q. 52
A heater is connected to a flat plate which produces constant heat flux of 2 kW. The plate has dimension of 70 cm by 70 cm. If is placed in
an air stream at 300 K, 1 atm with free stream velocity of 5 m/s. Calculate the average temperature difference along plate ________°C.
Take properties for air as
FAQ Have any Doubt ?
Solution :
384.69 (383 - 386)
QUESTION ANALYTICS
Chandeshwar Kumar Ram
(Enroll User) Sign out
Q. 53
A pelton turbine produces power equal to 40 MW under the head of 600 m. Discharge through nozzle is 10 m3/s with jet diameter equal to
0.2 m and number of jet are 4. Mechanical efficiency is 90%. Determine the sum of hydraulic power losses in the nozzle and
buckets________(MW).
Density of water = ρ = 1000 kg/m3
FAQ Have any Doubt ?
Chandeshwar Kumar Ram
Course: GATE
14.42 (14.35 - 14.50) Correct Option
Mechanical Engineering (ME)
HOME Solution :
14.42 (14.35 - 14.50)
MY TEST
BOOKMARKS
MY PROFILE
REPORTS
BUY PACKAGE
ASK AN EXPERT
OFFER
QUESTION ANALYTICS
Q. 54
A jet with diameter 0.07 m impinges without shock on a series of blades. The flow rate of water is 0.2 m3/s. Inlet jet velocity is in tangential
direction and gets deflected by 150°, Blade friction coefficient is 0.9. There is an additional leakage loss equal to half of the blade speed
head, that is The speed ratio for maximum speed is________. (Correct upto three decimal places)
Solution :
0.438 (0.430 - 0.445)
QUESTION ANALYTICS
Q. 55
A pipe with diameter 6 cm is used to carry liquid bismuth at a flow rate of 5 kg/s. The bismuth entry temperature is 400 C and exit
temperature is 450°C. If a constant heat flux is maintained and there is temperature difference of 20°C between bismuth and wall. The
length of tube required is________ m. Property of bismuth Chandeshwar Kumar Ram
–3
(Enroll User) Sign out
μ = 1.34 × 10 kg/m-s, cp = 0.149 kJ/kg-K, k = 15.6, W/mK, Pr = 0.013.
Take, Nu = 4.82 + 0.0185 (Pe)0.827, Pe = Peclet number
Have any Doubt ?
HOME
MY TEST
BOOKMARKS
MY PROFILE
REPORTS
BUY PACKAGE
ASK AN EXPERT
OFFER
QUESTION ANALYTICS
Q. 56
An air compressor with compression ratio of 5 (rp) is used to compress air having inlet temperature of 300 K. If the temperature of air at exit
is 500 K. The change in temperature of air at exit for unit increase in percentage polytropic efficiency is________ K.
(Assume constant inlet temperature and pressure ratio).
Have any Doubt ?
Solution :
(-2.75) (- 2.80 - - 2.70)
QUESTION ANALYTICS
Q. 57
Two cyclic plants with Rankine and brayton cycle are connected is series. Supplementary firing is done before the heat exchange between
the condenser of brayton cycle and boiler of Rankine cycle. The fraction of total heat supplied that is used for supplementary heating is 0.2.
Efficiency of Rankine cycle and brayton cycle are 30% and 40% respectively. Overall efficiency of plant is ________ %. Take 100% efficiency
for heat exchanger.
FAQ Have any Doubt ?
Solution :
52.4
Chandeshwar Kumar Ram
(Enroll User) Sign out
HOME
MY TEST
BOOKMARKS
MY PROFILE
REPORTS
BUY PACKAGE
ASK AN EXPERT
QUESTION ANALYTICS
OFFER
Solution :
0.1466
QUESTION ANALYTICS
Q. 59
A refrigerating cooling plant works on ideal vapour compression cycle using Freon- 12 as refrigerant. The evaporator and condenser
temperature are –30°C and 55°C. The flash gas percentage is ________%. Properties of Freon - 12 are given in table below:
Solution :
49.235 (49.1 - 49.4)
Chandeshwar Kumar Ram
(Enroll User) Sign out
QUESTION ANALYTICS
HOME
MY TEST
BOOKMARKS
MY PROFILE
95 Correct Option
BUY PACKAGE
ASK AN EXPERT Solution :
95
OFFER
QUESTION ANALYTICS
Q. 61
For a project the activity and its precedence relationship is given in the table below.
6 Correct Option
Solution :
6
Chandeshwar Kumar Ram
(Enroll User) Sign out
HOME
MY TEST
QUESTION ANALYTICS
BOOKMARKS
MY PROFILE Q. 62
A steel bar having diameter of 5 mm is drawn into a diameter of 4 mm at a speed of 1.2 m/s, then the power required is________kW. Use
REPORTS
relation σ = 895 ε0.49 MPa
Have any Doubt ?
BUY PACKAGE
OFFER Solution :
2.72 (2.70 - 2.74)
EXCLUSIVE OFFER FOR OTS
STUDENTS ONLY ON BOOK
PACKAGES
QUESTION ANALYTICS
Q. 63
A 4 cylinder 2 stroke petrol engine with stroke = 200 mm and Bore = 100 mm running at a speed of 1000 rpm effective area of each value is
40 mm2. The speed of air fuel mixture at valve is 500 m/s. The volumetric efficiency of engine is________%.
Have any Doubt ?
Solution :
76.4 (76.2 - 76.8)
QUESTION ANALYTICS
Q. 64
11 Correct Option
Solution :
11
Chandeshwar Kumar Ram
(Enroll User) Sign out
HOME
MY TEST
BOOKMARKS
MY PROFILE
REPORTS
BUY PACKAGE
QUESTION ANALYTICS
ASK AN EXPERT
OFFER Q. 65
EXCLUSIVE OFFER FOR OTS The probability of a man hitting a target in one fire is The number of times at least he must fire at the target in order that his chance of
STUDENTS ONLY ON BOOK
PACKAGES
hitting the target at least once will exceed will be
3 Correct Option
Solution :
3
QUESTION ANALYTICS