Professional Documents
Culture Documents
Docs PTS306470510170757271
Docs PTS306470510170757271
StartEff : 05/10/2017
EndEff :
CreatedBy :
CreatedDate : 05/10/2017
UnitID : PRD2_DataISO
Section :
DocCategory :
No.PNJHE-1045-25-05A
SPECIFICATION
FOR
4FO-SM-FSC/SPC/0.695M-0.79M-SR15E-SM10/125-4UT(0.9 Tube)
提出仕様書No.
先方仕様書No.
Fujikura Specification No.
Customer Specification No.
(Proposed to customer)
仕様書がない場合には斜線 を入れること。(空欄にしない)
In the absence of Fujikura/Customer specifications, fill an
oblique line in the column. (Don’t leave the column blank.)
Manager,
Fiber Optics Components Department Fiber Optics Components Department
Optical Cable Systems Division Optical Cable Systems Division
Fujikura Ltd.
PNJHE-1045-25-05A
1/4
1.General
1.1 Products Covered by this Specification
This specification covers 4FO fiber.
1.2 Product Type
No. Product Type
1 4FO-SM-FSC/SPC/0.695M-0.79M-SR15E-SM10/125-4UT(0.9 Tube)
2.Specifications
2.1 Appearance
There should be no damage, scratch and dirt on the products when visually checked.
2.2 Physical Dimensions
The physical dimensions are shown in Fig.1.
2.3 Components and Materials to be Used for the Products
The product shall be made from the components and materials stipulated in Table 1.
Table 1
Component or Q'ty
Description Remarks
Material
SR15E-4UT JH-2001-0236*(JAS-00835*) 1.405M Color of fiber: Blue, White, Brown, Slate
*:Spec version
Any version is acceptable
Reinforcing φ0.9,Nyron 0.695 Nyron tube(LF)
tube ㎜x4
SC Ferrule Zirconia 4pcs For single mode
SC connector JIS C5973(F04) 4pcs Boot: Lavender, Bellcore type
φ0.9
48MT Boot PNJHY-0005-71-18 1pc
8MTR Boot PNJHY-0005-22-05 1pc
Adhesive SuperX No.8008(Black)
(Note) Drawing No. shallbe applied latest version.
2.5 Checklist
Test items Quality Assessment Criteria Sample size
Appearance No damage, scratch and dirt All
Structure Conform to Fig.1 All
Composition, Length Conform to order All
Insertion loss As specified in Table-2 All
Return loss As specified in Table-2 All
Note: These items can be performed as part of the manufacturing process.
3. Test Report
The following items shall be included in the test report.
The test report shall be provided as electric data using Excel by E-mail.
3.1 Product Type
The specific Product Type shall be recorded.
3.2 Specification number
The specification number that is applied to the products shall be recorded.
3.3 Serial Number
The serial number of the each product shall be recorded in the test report.
3.4 Optical data
Optical data of the each product measured according to 2.4 shall be recorded.
3.5 Product length
The length of one product per lot shall be recorded in the test report.
4. Packing
PNJHA-0038-25-01(latest version):Method of packing
PNJAA-0007-36-02(latest version):Packing specification
5. Environmental requirement
Follow the PNJAA-0068-25-01(latest version)
: General Specification on Substance Control Requirements
PNJHE-1045-25-05A
3/4
PNJHE-1045-25-05A
4/4