Professional Documents
Culture Documents
ES1000 Manual
ES1000 Manual
ENGINE STAND
OWNER’S MANUAL 450KG MAX CAPACITY
This stand is designed for use only on hard level surfaces capable of sustaining the
load. Use on other than hard level surfaces can result in stand instability and tilting of
load.
Assure that the load is centred on to the mounting plate. Off-centre loads may make
the load and handle rotate in either direction when the rotational locking device is
released.
Lock mounting plate rotating mechanism before applying a load. Release rotational
locking devices slowly and carefully.
Failure to heed these warnings may result in loss of load, damage to stand and/or
failure resulting in personal injury or property damage.
MAINTENANCE
Visual inspection shall be made before each use of the stand checking for cracks,
cracked welds and/or damaged parts. Any stand that appears to be damaged in any
way shall be removed from service immediately.
Because of the potential hazards associated with the misuse of equipment of this ITEM DESCRIPTION QTY ITEM DESCRIPTION QTY
1 MAIN POST 1 11 CASTER 3-1/2” 2
type no modifications shall be made to the product. 2 SIDE LEG 1 12 FLAT WASHER 14 2
3 BOLT M12X80 3 13 RETAINER RING 2
4 HEAD ASSEMBLY 1 14 FRONT LEG 1
Replace worn or damaged parts with SGS Engineering replacement parts. Be sure 5 LOCK PIN 1 15 SIDE LEG, CASTER 1
6 MOUNTING ARMS 4 17 REAR WHEEL 4” 2
only qualified personnel perform repairs. 7 BOLT M12X50 4 18 BOLT M18X20 8
8 FLAT WASHER M12 6 19 LOCK WASHER M8 8
9 HEX NUT M12 6 20 NUT M8 8
10 LOCK WASHER M12 7
EC Declaration of Conformity
I, the undersigned, hereby declare that the equipment specified above con-
forms to the above European Communities Directive(s) and Standard(s).
PLACE: Derby, UK