Professional Documents
Culture Documents
100 QMA MO-SM013 Eng
100 QMA MO-SM013 Eng
Contents:
Permissible tightening torque
2. Steel screw………………….....................................................................................................................3
A2/A4-70 7,3
M6
A2/A4-80 9,7
+10%
A2/A4-70 17,5
M8
A2/A4-80 23,3
A2/A4-70 35
M 10
A2/A4-80 47
A2/A4-70 60
M 12
A2/A4-80 79
A2/A4-70 144
M 16
A2/A4-80 192
A2/A4-70 281
M 20 +5%
A2/A4-80 374
M 24 A2/A4-70 269
M 30 A2/A4-70 536
8.8 6,5
M5 10.9 9,5
12.9 11,2
8.8 11,3
M6 10.9 16,5
12.9 19,3
+10%
8.8 27,3
M8 10.9 40,1
12.9 46,9
8.8 54
M 10 10.9 79
12.9 93
8.8 93
M 12 10.9 137
12.9 160
8.8 230
M 16 10.9 338
12.9 395
8.8 464
M 20 10.9 661
12.9 773
+5%
8.8 798
M 24 10.9 1136
12.9 1329
8.8 1597
M 30 10.9 2274
12.9 2662
Due to the head geometrie (weaker cross section), and the working shape of the
wrench, the indicated values do not apply to the following screw types:
DIN 6912 hexagon socked head cap screw, low head with key guide
DIN 7984 hexagon socked head cap screw, low head
DIN 7991 hexagon socked countersunk screw
ISO 7380 hexagon socked flat head screw
The cross section critical for load is not in the thread but below the hexagon socket of
the screws. Therefore, a lower load capacity must be expected (70-80%).