Download as pdf or txt
Download as pdf or txt
You are on page 1of 15

Sri Chaitanya IIT Academy.,India.

 A.P  T.S  KARNATAKA  TAMILNADU  MAHARASTRA  DELHI  RANCHI


A right Choice for the Real Aspirant
ICON Central Office - Madhapur - Hyderabad
Sec: Jr.C-120 JEE-MAIN Date: 17-09-2022
Time: 10:00AM to 01:00PM WTM-10 Max. Marks: 300
IMPORTANT INSTRUCTION:
1. Immediately fill in the Admission number on this page of the Test Booklet with Blue/Black Ball Point
Pen only.
2. The candidates should not write their Admission Number anywhere (except in the specified space) on
the Test Booklet/ Answer Sheet.
3. The test is of 3 hours duration.
4. The Test Booklet consists of 90 questions. The maximum marks are 300.
5. There are three parts in the question paper 1,2,3 consisting of Physics, Chemistry and Mathematics
having 30 questions in each subject and subject having two sections.
(I) Section –I contains 20 multiple choice questions with only one correct option.
Marking scheme: +4 for correct answer, 0 if not attempt and -1 in all other cases.
(II) Section-II contains 10 Numerical Value Type questions. Attempt any 5 questions only, if more
than 5 questions attempted, First 5 attempted questions will be considered.
∎ The Answer should be within 0 to 9999. If the Answer is in Decimal then round off to the nearest
Integer value (Example i,e. If answer is above 10 and less than 10.5 round off is 10 and If answer is
from 10.5 and less than 11 round off is 11).
To cancel any attempted question bubble on the question number box.
For example: To cancel attempted question 21. Bubble on 21 as shown below

.
Question Answered for Marking Question Cancelled for Marking
Marking scheme: +4 for correct answer, 0 if not attempt and -1 in all other cases.
6. Use Blue / Black Point Pen only for writing particulars / marking responses on the Answer Sheet. Use
of pencil is strictly prohibited.
7. No candidate is allowed to carry any textual material, printed or written, bits of papers, mobile phone
any electron device etc, except the Identity Card inside the examination hall.
8. Rough work is to be done on the space provided for this purpose in the Test Booklet only.
9. On completion of the test, the candidate must hand over the Answer Sheet to the invigilator on duty in
the Hall. However, the candidate are allowed to take away this Test Booklet with them.
10. Do not fold of make any stray marks on the Answer Sheet
Name of the Candidate (in Capital): ________________________________________________
Admission Number:
Candidate’s Signature: __________________ Invigilator’s Signature: ____________________

17-09-2022_Jr.C-120 Jee-Main_WTM-10_Weekend Test Syllabus


MATHEMATICS : Straight lines (Complete) + 30% Cummulative

PHYSICS : Work - Energy - Power (Complete) + 30% Cummulative

CHEMISTRY T-1 : States of matter: upto Graham's Law of diffusion + 30% Cummulative
CHEMISTRY T-2 : Structure and Nomenclature (Complete), Isomerism: upto Chain, Position,
Functional, Metamerism, Ring-chain isomerism + 30% Cummulative
Sri ChaitanyaIIT Academy, India 17-09-2022_Jr.C-120_Jee-Main_WTM-10_Q.P.

PHYSICS Max Marks: 100


(SINGLE CORRECT ANSWER TYPE)
This section contains 20 multiple choice questions. Each question has 4 options (1), (2), (3) and (4) for its answer, out of which ONLY ONE option can
be correct.
Marking scheme: +4 for correct answer, 0 if not attempted and –1 in all other cases.
1. A particle of mass 0.1kg is subjected to a force which varies with distance as shown in
figure. It starts its journey from rest at x = 0, then its velocity at x= 12 m is

1)0 2) 20 2m / s 3) 20 3m / s 4) 40 m/s
2. The work done in carrying a body from A to B is 20J and from B to C is 15J. The work
done in moving the body from A to C assuming the force involved in all the cases is
conservative force is
1) 35J 2) 25J 3) 5J 4) 175J
3. A particle of mass m is projected with a velocity ‘u’ at an angle ‘  ’ with the horizontal.
Work done by gravity during its descent from its highest point to, the position where it

velocity vector makes an angle with the horizontal is
2
1 1 
1) mu 2 tan 2  2) mu 2 tan 2
2 2 2
1  1 
3) mu 2 cos 2  tan 2 4) mu 2 cos 2 sin 2 
2 2 2 2
4. A ball initial cylindrical vessels each of area of cross-section. A are on a level ground.
Each contains a liquid of density ‘  ’. The heights of liquid columns are h1 and h2 . If the
two vessels are connected by means of a narrow pipe at the battom, the work done by
gravity in equalizing the liquid levels is

1)
A g (h1  h2 )2
2
2)
A g 2
h1  h22
2
 
A g A g
3)  h1  h2 2 4)  h1  h2 
4 4
5. An open knife edge of mass M is dropped from a height ‘h’ on a wooden floor. If the
blade penetrates a distance ‘s’ into the wood, the average resistance offered by the wood
to the blade is
2
 h
2) Mg 1   3) Mg 1  
h h
1) Mg 4) Mg 1  
 s  s  s
6. A simple pendulum is swinging in a vertical plane. The ratio of its potential energies
when it is making angle 30° and 60° with the vertical is

1) 1: 2  3 
2) 2  3 :1  3) 1:2  4) 2:1

Sec: Jr.C-120 Page 2


Sri ChaitanyaIIT Academy, India 17-09-2022_Jr.C-120_Jee-Main_WTM-10_Q.P.
7. A spring of force constant k is stretched by a small length ‘x’. The work done in
stretching it further by a small length y is
1)
1
2

k x2  y 2  2)
1
2
k  x  y
2

1

3) k y 2  x 2
2
 1
4) ky  2 x  y 
2
8. A block of mass m is attached to two unstretched springs of constant k1 and k2 . The
other ends are free. There is no friction anywhere. The block is displaced towards left by
small distance x1 and released The maximum compression in spring of force constant
x
k2 is x2 . Then, ratio of 1 is
x2

k k k2 k 22
1) 1 2) 2 3) 4)
k2 k1 k1 k12
9. A uniform rope of mass 1kg and length 1m is lying on the ground. One end of the rope is
pulled up by a worker with the constant velocity of 1m/s. The average power supplied by
the worker in pulling the entire rope just off the ground such that the rope becomes
vertical. (take g = 10m/s2)
1) 5.5 W 2) 6 W 3) 10.5 W 4) None
10. Find the maximum value of friction force between the blocks shown in the diagram if
both are oscillating together with amplitude A on smooth horizontal surface

k
m
M

M m
1) KA 2) KA 3) KA 4) zero
M m M m
11. In case of a freely falling body, the ratio of kinetic energy at the end of the third second
to increase in kinetic energy in the next three seconds is
1) 1:1 2) 1:2 3) 1:3 4) 1:9

Sec: Jr.C-120 Page 3


Sri ChaitanyaIIT Academy, India 17-09-2022_Jr.C-120_Jee-Main_WTM-10_Q.P.
12. Two blocks A and B are released on the inclined plane of angle 30° and a circular track
of radius R from different heights h1 and h2 respectively. The mass of each block is m. If
F1 and F2 are the respective forces experienced by two blocks at the bottom most point of
the tracks and F1  F2 , then find the value of h2 for R  8m
A

h1 B
h2
30
1) 1m 2) 2m 3) 3m 4) 4m
13. A block of mass M1  10kg is placed on a slab of mass M 2  30 Kg . The slab lies on a
friction less horizontal surfaces as shown in figure. The coefficient of static friction
between the block and slab is 1  0.4 and that of dynamic friction is 2  0.15. The
acceleration with which the slab will move is ( g  10ms 2 )

F  50 N M1
M2

Smooth
1) 5ms 2 2) 2ms2 3) 1.25ms 2 4) 0.5ms 2
14. A block of mass m is lowered with the help of a rope negligible mass of through a
distance ‘d’ with an acceleration of g/3. Work done by the rope on the block is

2 Mgd 2 Mgd Mgd Mgd


1) 2)  3) 4) 
3 3 3 3

15. A table fan rotating at a speed of 2400 rpm is switched off and the resulting variation of
the rpm with time is shown in the figure. The total number of revolutions of the fan
before it come to rest is
2400
Rev/min

400

0
8 16 24 t(s)
1) 420 2) 280 3) 190 4) 16800
16. A 5000kg rocket is set for vertical firing. The exhaust speed is 800ms1 . To gives an
upwards acceleration of 20ms1 , the amount of gas ejected per second to supply the
needed thrust is (g = 10ms-2)
1) 127.5kg s 1 2) 137.5kg s 1 3) 187.5kg s 1 4) 185.5kg s 1
Sec: Jr.C-120 Page 4
Sri ChaitanyaIIT Academy, India 17-09-2022_Jr.C-120_Jee-Main_WTM-10_Q.P.
17. Three blocks of masses m1, m2and m3 are connected by a massless string as shown in
figure on a frictionless table. They are pulled with a force T3  40 N . If
m1  10kg , m2  6kg and m3  4kg , then tension T2 will be

1) 10 N 2) 20 N 3) 32 N 4) 40 N
18. 2
If a force F  ax  bx  c acts on a block along positive x-direction. In the expression of
force a, b and c are constant. Find work done by the force on the block if block displaces
from x = 0 and x = d
ad 3 bd 2 ad 3 ad 3 bd 2
1)   cd 2)  bd 2 3)   cd 4) None
3 2 2 3 4
19. In the following figure, the pulley is masless and frictionless. There is no friction
between the body and the floor. The acceleration produced in the body when it is
displaced through certain with force P will be

1) P/M 2) P/2M 3) P/3M 4) P/4M

20. The rear side of a truck is open and a box of 40kg mass is placed 5m away from the open
end as shown in figure. The coefficient of friction between the box the surface below it
is 0.15. On a straight road, the truck starts from rest and accelerates with 2ms2 . At what
distance from the starting point does the box fall from the truck? (Ignore the size of the
box)

1) 20m 2) 10m 3) 20m 4) 5m

Sec: Jr.C-120 Page 5


Sri ChaitanyaIIT Academy, India 17-09-2022_Jr.C-120_Jee-Main_WTM-10_Q.P.
(NUMERICAL VALUE TYPE)
Section-II contains 10 Numerical Value Type questions. Attempt any 5 questions only. If more than 5 questions attempted, First 5
Attempted questions will be considered. The Answer should be within 0 to 9999. If the Answer is in Decimal then round off to the nearest
Integer value (Example i,e. If answer is above 10 and less than 10.5 round off is 10 and if answer is from 10.5 and less than 11 round off is 11).
Marking scheme: +4 for correct answer, 0 if not attempt and -1 in all other cases.

21. A uniform chain of length 2m is kept on a table such that a length of 60 cm hangs freely
from the edge of the table. The total mass of the chain is 4kg. What is the work done in
pulling the entire chain on to the table? (g = 10m/s2) (in J)
22. A block placed on a rough inclined plane of inclination (   30 ) can just be pushed
upwards by applying a force F as shown. If the angle of inclination of the inclined plane
is increased to (   60 ), the same block can just be prevented from sliding down by
application of a force of same magnitude. The coefficient of friction between the block
n 1
and the inclined plane is where n is
n 1

23. The blocks ‘A’ and ‘B’ of weight 20N and 100N. These are being pressed against a wall
by a force F. If ‘  ’ between the blocks is 0.1 and between B and wall is 0.15. The
frictional force applied by the wall on block B is in Newtons

24. A circular disc is rotating about its own axis at uniform angular velocity  . The disc is
subjected to uniform angular retardation by which its angular velocity is decreased to
 / 2 during 120 rotations. The number of rotations further made by it before coming to
rest is ……

25.  
A force F  5iˆ  3 ˆj  2kˆ N moves a particle from

   
r1  2iˆ  7 ˆj  4kˆ mto r2  5iˆ  2 ˆj  8kˆ m . The work done by the force is (in J)

Sec: Jr.C-120 Page 6


Sri ChaitanyaIIT Academy, India 17-09-2022_Jr.C-120_Jee-Main_WTM-10_Q.P.
26. A car moving with a velocity of 72 KMPH stops engine just before ascending an
inclined road. If 25% of energy is wasted in overcoming friction, the car rises to a height


of (in m) g  10ms 2 
27. Twenty identical cubical blocks each of mass 100gm and of side 10cm are lying on a
horizontal surface. Work done in pilling them one above the other is (g = 10ms -2) (in J)
28. A river of salty water is flowing with a velocity 2m/sec. If the density of the water is
1.2gm/cc then the kinetic energy of each of cubic metre of water is (in KJ)
29. The figure shows a smooth track, a part of which is circle of radius R. A block of mass
m is pushed against a spring of spring constant K fixed at the left end and is then
released. The initial a force mg when it reaches the point P, where the radius of the track
nmgR
is horizontal is , the value of n is
K

30. Each day human heart takes in and discharges about 7500L of blood. Assume that the
work done by the heart is equal to the work required to lift this amount of blood by
1.63m. The density of blood is 1.05 103 kg / m3 . Heart’s power output is 148/10nW.
Find the value of n

Sec: Jr.C-120 Page 7


Sri ChaitanyaIIT Academy, India 17-09-2022_Jr.C-120_Jee-Main_WTM-10_Q.P.
CHEMISTRY Max Marks: 100
(SINGLE CORRECT ANSWER TYPE)
This section contains 20 multiple choice questions. Each question has 4 options (1), (2), (3) and (4) for its answer, out of which ONLY ONE option can
be correct.
Marking scheme: +4 for correct answer, 0 if not attempted and –1 in all other cases.
31. Which of the following curves does not represents Boyle’s law

  45
log P

P
1
log  
1) V
2) v

135
log P
PV

1
log  
3) v 4) V

32. Initial temperature of an ideal gas is 75°C. At what temperature, the sample of neon gas
would be heated to double its pressure, if the initial volume of gas is reduces by 15%
1) 319°C 2) 592°C 3) 128°C 4) 60°C
33. At 0°C and one atm pressure, a gas occupies 100c.c. If the pressure is increased to one
and a half time and temperature is increased by one – third of absolute temperature, then
final volume of the gas will be
1) 80 cc 2) 88.9cc 3) 66.7cc 4) 100 cc
34. The pressure of sodium vapour in a 1.0L container is 10 torr at 1000°C. How many
atoms are in the container

1) 9.7 1017 2) 7.6 1019 3) 4.2 1017 4) 9.7 1019


35. A 4.40g piece of solid CO2 (dry ice) is allowed to sublime in a balloon. The final volume
of the balloon is 1.00L at 300K. What is pressure (atm) at of the gas?
1) 0.122 2) 2.46 3) 122 4) 24.6
36. At what temperature will be rate of effusion of N2 be 1.625 times the rate of effusion of
SO2 at 500°C
1) 273 K 2) 893 K 3) 110 K 4) 373 K

Sec: Jr.C-120 Page 8


Sri ChaitanyaIIT Academy, India 17-09-2022_Jr.C-120_Jee-Main_WTM-10_Q.P.
37. A steel cylinder of 8 litres capacity contain hydrogen gas at 12 atm pressure. At the same
temperature how many cycle tubes of 4 litres capacity at 2 atm can be filled up with this
gas
1) 12 2) 48 3) 5 4) 10
38. Total pressure observed after opening the stop cock is (neglecting the volume of the tube
connecting the two bulbs)
A B

H2 N2

0.1L 0.2L
2atm 1atm
1) 1.33 atm 2) 3 atm 3) 0.3 atm 4) 0.75 atm
39. The IUPAC name of the given compound is

1) 4, 5-Dimethyl-4-octene 2) 4,5-dimethyl-5-octene
3) 3,4 –dimethyl-4 –octene 4) 2,3—dimethyl -2-butene
OH

CH2-CH3
40. IUPAC name of the given compound is
1) 3-ethyl –cyclobuten-2-ol 2) 4-ethyl-2-cyclobuten-1-ol
3) 2-ethyl-3-cyclobuten-1-ol 4) 4-ethyl-1-cyclobuten-3-ol
CH 2  CH  CH 2
41. The IUPAC name of the given compound | | |
CN CN CN
1) 1,2,3 –Tricyano propane 2) 3-cyano pentane 1,5-dinitrile
3) 1,2,3-tricarbonitrile propane 4) 1,2,3-propene tricarbonitrile

Sec: Jr.C-120 Page 9


Sri ChaitanyaIIT Academy, India 17-09-2022_Jr.C-120_Jee-Main_WTM-10_Q.P.

42. The IUPAC name of the given structure is


1) Methyl butane 2) Di-methyl propane
3) 1-Methyl 1-ethyl ethane 4) Pentane
O O
|| ||
43. The correct IUPAC name of H  C  C  H is
1) Formyl methanal 2) 1,2-Ethanedione
3) 2-oxo ethanol 4) 1,2-Ethanedinal
44. Which of the following is named 4-cyclopropyl-4-ethyl-1-heptene

1) 2)

3) 4)
45. Correct order of priority of functional groups in nomenclature rule
1) -COOH > -COOR > -CN > -OH > Alkene > -SO3H
2) -COOH> -SO3H > -COOR > -CN > - OH > Alkene
3) -COOH >-CN >-COOR > -OH > Alkene > - SO3H
4) -COOH > -SO3H > -COOR > -OH > CN > Alkene
CH3
|
46. IUPAC name for the amine CH 3  N  C  CH 3  CH 3 is
| |
CH3 C2 H 5
1) 3-dimethylamino – 3-methylpentane
2) 3- (N, N-Trimethyl)-3-aminopentane
3) 3-N, N – Trimethyl pentanamine
4) 3-(N, N-dimethylamino)-3-methylpentane
47. Which of the following pairs of compounds are functional isomerism?
O O

OH O
& &
H
1) H 2) H
O

& &

3) OH 4) O

Sec: Jr.C-120 Page 10


Sri ChaitanyaIIT Academy, India 17-09-2022_Jr.C-120_Jee-Main_WTM-10_Q.P.

48. IUPAC name of the compound


1) 1,3-dimethyl 1, 2, 3-isopropyl propane
2) 2, 3, 5 - trimethyl 4 - [1, 2-Dimethyl propyl] Hexane
3) 2, 3, 5, 6-tetra methyl 4-[1-Ethyl, methyl ] heptane
4) 2, 3, 5, 6- tetramethyl 4-[1 methyl Ethyl ]heptanes

49. IUPAC name of the following compound


1) 2,4,6- triene octane
2) 2-ethyl 4-propyl pent 1,4 – ene
3) 4 [2-ene, Butyl]penta-2,4-diene
4) 2-Ethyl, 4-propenyl penta 1,4-diene

50.
1) 1, 2 dipentyl, 5, 6-diethyl,spiro [2, 4] heptanes
2) 1, 1, 2, 2-tetra ethyl -5, 6-dipropyl,spiro [2, 4] Heptane
3) 2, 2, 11, -tetra ethyl 5, 6-dipropyl spiro [2, 4] Heptane
4) 1, 1, 2, 2,- tetra ethyl 5, 6 – dipropyl bicyclo [4, 2, 0] heptane

Sec: Jr.C-120 Page 11


Sri ChaitanyaIIT Academy, India 17-09-2022_Jr.C-120_Jee-Main_WTM-10_Q.P.
(NUMERICAL VALUE TYPE)
Section-II contains 10 Numerical Value Type questions. Attempt any 5 questions only. If more than 5 questions attempted, First 5
Attempted questions will be considered. The Answer should be within 0 to 9999. If the Answer is in Decimal then round off to the nearest
Integer value (Example i,e. If answer is above 10 and less than 10.5 round off is 10 and if answer is from 10.5 and less than 11 round off is 11).
Marking scheme: +4 for correct answer, 0 if not attempt and -1 in all other cases

51. The equivalent mass of an element is 4. Its chloride has vapour density 592.5. Then the
valency of the element is………….
52. 2.0g of polybasic organic acid (molecular mass =600) required 100ml of a M/6 NaOH
solution for complete neutralization. Find the basicity of acid
53. 200mL of 1M HCl is mixed with 300mL of 6M HCl and the final

solution is diluted to 1000mL. Calculate molar concentration of  H   ion


 

54. A gas occupies a volume of 2.5L at 9 105 N / m2 . The additional


pressure required to decreases the volume of the gas to 1.5L keeping the temperature

constant is………….. 105 N / m2


55. A mixture contains 16g of oxygen 28g of nitrogen and 8g of methane
total pressure of the mixture is 740mm. The partial pressure (mm) of nitrogen is

3.7 10 x mm. The value of x is

56. The ratio of energies of a photon of 2000Å wavelength radiation to


that of 4000Å radiation

57. The number of d-electrons retained in Fe2 (At no of Fe = 26) ion


is…………

B  I
N N
|
H
58. Among
How many compounds have aromatic
59. Total number of chain isomers for Hexane =
60. 0.3g of an organic compound on combustion liberated 0.18g of water
vapour and 0.44g of CO2, Calculate the percentage composition of the
compounds

Sec: Jr.C-120 Page 12


Sri ChaitanyaIIT Academy, India 17-09-2022_Jr.C-120_Jee-Main_WTM-10_Q.P.
MATHEMATICS Max Marks: 100
(SINGLE CORRECT ANSWER TYPE)
This section contains 20 multiple choice questions. Each question has 4 options (1), (2), (3) and (4) for its answer, out of which ONLY ONE option can
be correct.
Marking scheme: +4 for correct answer, 0 if not attempted and –1 in all other cases.

61. If A (1, 5), B(3,2) then sum of coordinate of ‘P’ on y=x such that |PA – PB| is
Maximum
1) 7 2) 14/3 3) 7/3 4) 0
62. If the point (a, a ) below the line x -y + 2 =0 then a 
2

1) a   , 1   2,  2) a   1,2


3) a  1,3 4) a  R  2
63. Equation of angular bisector between the lines 3x  4 y  1  0, 4 x  3 y  9  0 which
contain the point (1,1)
1) x  y  2  0 2) x  y  3
8
3) x  y   0 4) y  x
7
 a 3 a 2  3   b3 b 2  3   c 3 c 2  3 
64. If the points  , , , ,  ,  are collinear where
 a 1 a 1   b 1 b 1   c 1 c 1 
     
a, b, c  1 and different then abc – (ab + bc+ca) +3 (a+b+c) =
1) 2 2) 1 3) -1 4) 0

65. If cos  x    cos x  a has a solution then
 3
1 1
1) a   ,  2) a  (1, 2) 3) a    3, 3  4) a = 0
3 3 
 2 1
66. Let X be the solution set of the equation An  I where A    , n  N then
 3 2 
n
minimum value of  cosn   sin n  ,  R    , where I is the unit matrix
 2 
1) 2 2) 1 3) 0 4) 3
a b 
67. If A    , a, b, c  0,1, 2 and A is a singular matrix then number of matrices ‘A’
c a
1) 6 2) 5 3) 10 4) 7
68. If a 3  3 determinant made by using the elements {1, 2, 3} then minimum value of the
determinant
1) 28 2) 0 3) -28 4) 10
69. If the family of lines 2x  y  4    x  2 y  5  0, x  3 y  15   (3x  y  13)  0 ,
ax  3y  28   3x  ay  27   0 have a line common then sum values of ‘a’
1) 0 2) 1 3) -1 4) 2

Sec: Jr.C-120 Page 13


Sri ChaitanyaIIT Academy, India 17-09-2022_Jr.C-120_Jee-Main_WTM-10_Q.P.
70. In a ABC , if A(0,0) and equation of internal angular bisector through B is
x + 2y -5 = 0 and equation of perpendicular bisector of side AC is 3x – y – 10 = 0
then slope of BC
1) 5/4 2) -15/2 3) -5/4 4) -3/4
71. From a point (3,4) , perpendiculars PQ, PR are drawn to a line 3x + 4y -7 =0 and a
variable line y-1 = m (x – 7) respectively. Then maximum area of PQR
1) 9 2) 5 3) 3 4) 6
72. The ratio in which the line 3x + 4y +2 = 0 divides the distance between 3x + 4y +5 =0
and 3x + 4y – 5= 0 is
1) 7:3 2) 3:7 3) 2:3 4) 3:2
73. A ray of light along x  3 y  3 gets reflected upon reaching x-axis and equation of
reflected ray is by = x+C then b +C
1) 0 2) 2 3 3) 2 4) 1
a b   x  0
74. If A    , B   y   0 , AB = B and a + d = 5050 then ad – bc
c d     
1) 5123 2) 5051 3) 5050 4) 5049
75. If a, b, c, d are non – zero real numbers. If the point of intersection of
4ax +2ay + c=0, 5bx+2by +d =0 lies in fourth quadrant and is equal distance from
coordinate axis then 3bc =
1) a + d 2) ad 3) 2ad 4) 8ad

76. If the straight line through the point P (3, 4) makes an angle with x-axis and
6
meets the line 3x + 5y +1 =0 at ‘Q’ the PQ =
1) 30 2) 30 3  1  
3) 3  1 
4) 30 3 3  5 
77. If the ends of a rod of length ‘l’ moves on the coordinate axes then the locus of a point
on the rod which divides it in the ratio 1:2 is
1) 36 x2  9 y 2  4l 2 2) 36 x2  9 y 2  l 2
3) 9 x2  36 y 2  4l 2 4) 9 x2  36 y 2  l 2
x
78. If (a, a 2 ) falls inside the angle made by the lines y  , x  0, y  3x, x  0 then a 
2
1 1
2)  ,3  3)  3,  4)  0, 
1
1) (3, 6)
 2   2  2
79. If the points (1,2), (3,4) were to be on the same side of the line 3x – 5y + a = 0 then
1) a   7,11 2) a   ,7  11, 
3) a  1,   4) a = 7
80. If 6a2  12b2  2c2  17ab 10bc  7ac  0 then all the lines represented by ax  by  c  0
are concurrent at the point
1) (1,2) 2) (-2,-3) 3) (-2,1) 4) (2, -3)

Sec: Jr.C-120 Page 14


Sri ChaitanyaIIT Academy, India 17-09-2022_Jr.C-120_Jee-Main_WTM-10_Q.P.
(NUMERICAL VALUE TYPE)
Section-II contains 10 Numerical Value Type questions. Attempt any 5 questions only. If more than 5 questions attempted, First 5
Attempted questions will be considered. The Answer should be within 0 to 9999. If the Answer is in Decimal then round off to the nearest
Integer value (Example i,e. If answer is above 10 and less than 10.5 round off is 10 and if answer is from 10.5 and less than 11 round off is 11).
Marking scheme: +4 for correct answer, 0 if not attempt and -1 in all other cases

81. If the lines x + ay + a = 0, bx + y + b = 0, cx+ cy +1 = 0 (a,b,c  1 and different) are

a b c
concurrent then   
a 1 b 1 c 1

82. Equation of the line belonging to the system 3x + 2y – 8 +  (2 x  5 y  1)  0

and having equal intercept is x + by = c then b + c

83. If the orthocenter of a triangle formed by the points (0,0), (5, -1) , (-2, 3) is (x, y)

then absolute value of x + y

2sin x tan x
84.  
sin 3 x tan 3 x

85. If P, Q are the points of trisection of A (1, -2) , B (-5, 6) then 3 PQ =

86. A line with negative slope passes through (3,4) meets the axis OX , OY at A, B the

minimum area of OAB is

87. In a  ABC, orthocenter H(2354, 981) and A (2,1), B(-10, 6) then distance

between the orthocenter of HBC , HAC is

88. If A (-2, 0), B (2,0) then number of integral values of a in [-10, 10] such that C(a, a+1)

makes acute angle with AB

89. Number of solutions of x – 7 |sinx| =0

90. Sum of solutions of sinx + tanx + x3  0 in  2 ,2 

Sec: Jr.C-120 Page 15

You might also like