Professional Documents
Culture Documents
MSDS Rilsan BESN
MSDS Rilsan BESN
Grades : 1 RILSAN® BESNO P20 TL / 2 RILSAN® BESN BLACK P20 TL / 2 RILSAN® BESN BLACK P210 TL / 2 RILSAN® BESNO P20 TL / 2
RILSAN® BESNO P20 TLO / 2 RILSAN® BESNO P210 TL / 3 RILSAN® BESN BLACK P20 TL / 3 RILSAN® BESNO P20 TL / RILSAN® PA11 G
BESNO P301 TL NL /
1.2. Relevant identified uses of the substance or mixture and uses advised against
Supplier ARKEMA
Specialty Polyamides
420 rue d’Estienne d'Orves
92705 Colombes Cedex, FRANCE
Telephone: +33 (0)1 49 00 80 80
Telefax: +33 (0)1 49 00 83 96
E-mail address: pars-drp-fds@arkema.com
http://www.arkema.com
+ 33 1 49 00 77 77
European emergency phone number: 112
2. HAZARDS IDENTIFICATION
The product is put on the market on a form that encapsulates component(s) in a polymer., To our knowledge, product on this form shouldn't
have any significant risk for health by inhalation, ingestion or contact with skin or for the environment., According to European classification
and labelling regulation for hazardous substances and preparations, the product is not subjected to labelling although one/several
component(s) is/are classified as hazardous.
Environmental Effects:
Not biodegradable
Other:
Results of PBT and vPvB assessment : Based on the available information, it is not possible to conclude on PBT and vPvB criteria
according to REACH regulation, annex XIII.
3. COMPOSITION/INFORMATION ON INGREDIENTS
3.2. Mixtures
Hazardous components (accordance with Annex II of Regulation (EC) No 1907/2006 and its amendment(s)) :
Classification
Chemical name1 & REACH Registration Number2 EC-No. CAS-No. Concentration
REGULATION (EC) No 1272/2008
STOT RE 2; H373
N-Butylbenzenesulphonamide (01-2119486780-29) 222-823-6 3622-84-2 < 10 % Aquatic Chronic 3; H412
1
: See chapter 14 for Proper Shipping Name
2
:See the text of the regulation for applicable exceptions or provisions : The transition time according to REACH Regulation, Article 23, is still
not expired.
General advice:
No hazards which require special first aid measures.
Inhalation:
Inhalation of vapours due to thermal decomposition : Move to fresh air. Oxygen or artificial respiration if needed. In case of problems : Consult
a physician.
Skin contact:
On contact with hot product : Cool skin rapidly with cold water after contact with molten polymer. Remove product with vegetable oil or
paraffin. In case of adhesion, do not try to remove the product. Treat the affected areas as thermal burns. Consult a physician.
Eye contact:
Dusts : Wash well-open eyes immediately, abundantly and thoroughly with water. Remove particles remaining under the eyelids. If irritation
persists, consult an ophthalmologist.
On contact with hot product : Cool eyes rapidly with cold water after contact with molten polymer. Consult an ophthalmologist immediately.
Ingestion:
In case of problems : Consult a doctor.
Protection of first-aiders:
In case of insufficient ventilation, wear suitable respiratory equipment.
4.3. Indication of immediate medical attention and special treatment needed, if necessary: No data available.
5. FIREFIGHTING MEASURES
Specific methods:
Ensure a system for the rapid emptying of containers. In case of fire nearby, remove the bags.
Recovery:
Recover the product. Shovel into suitable container for disposal. Sweep up to prevent slipping hazard.
Elimination:
Destroy the product by incineration (in accordance with local and national regulations).
Technical measures/Precautions:
Storage and handling precautions applicable to products: Solid (pellets).
Ensure ventilation of work areas and extraction of dust or vapours likely to be given off during conversion operations (product handled when
hot). Provide showers, eye-baths. Provide water supplies near the point of use.
Hygiene measures:
Avoid contact with the skin and the eyes. Avoid breathing dust. Product handled when hot : Avoid inhalation of vapours. When using do not
eat, drink or smoke.
Wash hands after handling. Remove contaminated clothing and protective equipment before entering eating areas.
Incompatible products:
None known.
Packaging material:
Recommended: Triplex bags (polyethylene - aluminium - polyethylene), Triplex bags (paper, aluminium, polyethylene)
Compartment: Value:
Fresh water 0,037 mg/l
Marine water 0,0037 mg/l
Water (Intermittent release) 0,37 mg/l
Fresh water sediment 0,213 mg/kg dw
Marine sediment 0,0213 mg/kg dw
Soil 0,27 mg/kg dw
Effects on waste water treatment plants 60 mg/l
Appearance:
Physical state (20°C): solid
Form: granules
Colour: Colourless or Mass coloured
Odour: none
Olfactory threshold: Not relevant
pH: Not applicable
Melting point/range : 178 - 187 °C
Boiling point/boiling range : Not applicable (decomposes on heating)
Flash point: Not applicable
Evaporation rate: Not relevant
Flammability (solid, gas): No data available.
Vapour pressure: Not relevant
Vapour density: Not relevant
Relative density: No data available.
Bulk density: 570 - 670 kg/m3
Water solubility: insoluble, (on the basis of its structure) at 20 °C
Partition coefficient: n-octanol/water: N-BUTYLBENZENESULPHONAMIDE :
log Kow : 2,01 (OECD Test Guideline 107)
Auto-ignition temperature: 420 - 450 °C (Standard ASTM D 1929-77 (B))
Decomposition temperature: > 350 °C
Viscosity, kinematic: Not applicable
Explosive properties:
Explosivity: Not relevant (due to the chemical structure)
Oxidizing properties: Not relevant (due to the chemical structure)
Solubility in other solvents: Soluble in:, Benzyl alcohol, Formic acid (concentrate), Sulphuric acid (concentrate), Metacresol,
Phenols
Thermal decomposition:
Decomposition temperature: > 350 °C
300 - 350 °C: possible formation of:
Plasticizer, monomer and oligomer (white fumes)
Thermal decomposition giving toxic and corrosive products :
Carbon monoxide, Ammonia, Amino derivatives, Sulphur dioxide
Temperature exceeding 500 °C :
Formation of toxic products through combustion:
Carbon oxides, Sulphur compounds, Hydrogen cyanide (hydrocyanic acid), (traces)
All available and relevant data on this product and/or the components quoted in section 3 and/or the analogue substances/metabolites have
been taken into account for the hazard assessment.
Acute toxicity:
Dermal: According to its composition, can be considered as : Slightly harmful in contact with skin
N-BUTYLBENZENESULPHONAMIDE :
• In animals : No mortality/Rat: 2 g/kg (Method: OECD Test Guideline 402)
Skin contact: According to its composition, can be considered as : Slightly or not irritating to skin
• In man : Contact with the product, when handled at high temperatures, can cause serious burns.
At high temperature, products of thermal decomposition can be irritating to skin
N-BUTYLBENZENESULPHONAMIDE :
• In animals (rat) : • In animals : Non irritating to skin, No skin irritation (OECD Test Guideline 404, Rabbit, Exposure time: 4 h)
Eye contact: According to its composition, can be considered as : Slightly or not irritating to eyes
• In man : Contact with the product, when handled at high temperatures, can cause serious burns.
At high temperature, products of thermal decomposition can be irritating to eyes
N-BUTYLBENZENESULPHONAMIDE :
• In animals (rabbit): • In animals No eye irritation (OECD Test Guideline 405, Rabbit)
:
Skin contact: According to its composition, can be considered as : Not a skin sensitizer
N-BUTYLBENZENESULPHONAMIDE :
• In animals : No skin allergy was observed (Method: OECD Test Guideline 429 LLNA: Local Lymph Node Assay,
Mouse)
CMR effects :
In vitro
N-BUTYLBENZENESULPHONAMIDE :
Ames test: Not genotoxic (Method: OECD Test Guideline 471)
Chromosome aberration test in vitro: Not genotoxic (Method: OECD Test Guideline 473)
In vitro chromosomal abnormality test on human lymphocytes: Not genotoxic (Method: OECD Test
Guideline 476)
Carcinogenicity: Polymer: According to its composition, this product should not be harmful in normal
conditions of use
Reproductive toxicity:
Fertility: Polymer: According to its composition, this product should not be harmful in normal conditions
of use
N-BUTYLBENZENESULPHONAMIDE :
• In animals : Reproductive/Developmental Effects Screening Assay: At high dose :, Testicular toxicity, Toxic effects
on fertility.
NOAEL ( Parental toxicity ): 200 mg/kg bw/day
NOAEL ( Fertility ): 200 mg/kg bw/day
(Method: OECD Test Guideline 421, Rat, By oral route)
Foetal development: Polymer: According to its composition, this product should not be harmful in normal conditions
of use
Inhalation:
• In man : At high temperature, products of thermal decomposition can be irritating to respiratory system
Repeated exposure: Polymer: According to its composition, this product should not be harmful in normal
conditions of use
Under certain conditions of use, prolonged and/or repeated inhalation of dusts or vapours/aerosols
(resulting from heating the product) could cause harmful effects due to the presence of additives
N-BUTYLBENZENESULPHONAMIDE :
• In animals : By oral route: Target organs: Liver, Thymus, Testicles, NOAEL= 50mg/kg bw/day (Method: OECD Test
Guideline 407, Rat, 4 Weeks)
Aspiration hazard:
Not relevant
Ecotoxicology Assessment: All available and relevant data on this product and/or the components quoted in section 3 and/or the
analogue substances/metabolites have been taken into account for the hazard assessment.
Fish: Based on the available information, it is not possible to conclude on the hasard potential of
this mixture.
N-BUTYLBENZENESULPHONAMIDE :
LC50, 96 h (Danio rerio (zebra fish)) : > 37,6 mg/l (Method: OECD Test Guideline 203, pH: 8,2)
Aquatic invertebrates: Based on the available information, it is not possible to conclude on the hasard potential of
this mixture.
N-BUTYLBENZENESULPHONAMIDE :
EC50, 48 h (Daphnia magna (Water flea)) : = 56 mg/l (Method: Standard ISO 6341)
Aquatic plants: Based on the available information, it is not possible to conclude on the hasard potential of
this mixture.
N-BUTYLBENZENESULPHONAMIDE :
EC r50, 72 h (Selenastrum capricornutum) : = 83 mg/l (Growth inhibition)
Microorganisms:
N-BUTYLBENZENESULPHONAMIDE :
EC50, 3 h (Activated sludge) : > 6.000 mg/l (Method: OECD Test Guideline 209, Respiration inhibition)
Aquatic plants:
N-BUTYLBENZENESULPHONAMIDE :
NOEC r, 72 h (Pseudokirchneriella subcapitata (green algae)) : 9,1 mg/l (Method: OECD Test
Guideline 201, pH: 8,2, growth rate inhibition)
Biodegradation (In water): Inert polymer Not biodegradable on the basis of its structure
N-BUTYLBENZENESULPHONAMIDE :
Not readily biodegradable.: 18 % after 28 d (Method: OECD Test Guideline 301 B)
Disposal of product: Do not dispose of waste into sewer. Recycle if possible. Destroy the product by incineration (in
accordance with local and national regulations).
Disposal of packaging: Do not release into the environment. Recycle if possible. Destroy packaging by incineration at an
approved waste disposal site (in accordance with local and national regulations).
Safety data sheets: accordance with Annex II of Regulation (EC) No 1907/2006 and its amendment(s)
15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture:
INVENTORIES:
For the inventory details, see Appendix.
Update:
Thesaurus:
NOAEL : No Observed Adverse Effect Level (NOAEL)
LOAEL : Lowest Observed Adverse Effect Level (LOAEL)
bw : Body weight
food : oral feed
dw : Dry weight
vPvB : very Persistent and very Bioaccumulative
PBT : Persistent, Bioaccumulative and Toxic
This information applies to the PRODUCT AS SUCH and conforming to specifications of ARKEMA. In case of formulations or mixtures, it is
necessary to ascertain that a new danger will not appear. The information contained is based on our knowledge of the product, at the date of
publishing and it is given quite sincerely. Users are advised of possible additional hazards when the product is used in applications for which it was
not intended. This sheet shall only be used and reproduced for prevention and security purposes. The references to legislative, regulatory and
codes of practice documents cannot be considered as exhaustive. It is the responsibility of the person receiving the product to refer to the totality of
the official documents concerning the use, the possession and the handling of the product. It is also the responsibility of the handlers of the product
to pass on to any subsequent persons who will come into contact with the product (usage, storage, cleaning of containers, other processes) the
totality of the information contained within this safety data sheet and necessary for safety at work, the protection of health and the protection of
environment.
NB: In this document the numerical separator of the thousands is the "." (point), the decimal separator is "," (comma).
INVENTORIES DOCUMENT
Product: RILSAN® B PLASTICIZED EXTRUSION TYPE 1 Page: 1 / 1
SDS No.: 001096-001 (Version 1.0) Date 21.12.2016
(I) This product contains at least one component covered by an exemption available only for
(A) The product contains ELINCS substances.
Arkema - Please consult Arkema for more information
(J) This product contains at least one component covered by a polymer exemption available only
(B) This substance has been registered according to Regulation (EC) No. 1907/2006 (REACH). for Arkema - Please consult Arkema for more information.
(C) This substance is exempt from registration according to Regulation (EC) No. 1907/2006
(K) Consult ARKEMA.
(REACH).
(D) This product contains at least one component registered according to Regulation (EC) N°
(L) This product contains a NLP (No Longer Polymer)
1907/2006 (REACH)
(E) This product contains at least one component exempt according to Regulation (EC) N°
(M) The mixture contains a polymer. The monomers for this polymer have been notified.
1907/2006 (REACH)
(F) All components of this product are on the Canadian DSL (N) Consult ALTUGLAS
(G) This product contains one or several components listed in the Canadian NDSL list. All other
(O) Based on alternate CAS number(s).
components are on the DSL list.
(H) This product contains one or several components that are not on the Canadian DSL nor
NDSL lists.
In case of empty inventory, Consult ARKEMA.
Page 9/10
ARKEMA 420 rue d’Estienne d'Orves - 92700 Colombes – FRANCE
Page 10/10
Quick-FDS [17889-40011-21363-018602] - 2016-12-22 - 11:06:52