Professional Documents
Culture Documents
D16e E2a-4 Inductive Proximity Sensor With Gold-Plated Pins Datasheet en
D16e E2a-4 Inductive Proximity Sensor With Gold-Plated Pins Datasheet en
E2A-4
Inductive proximity sensor E2A-4 was created and tested for
applications in the harsh environment and at though vibration
conditions. Gold-plated contact pins provide increased protection
against corrosion in high humidity and vibration.
• Gold-plated contact pins
• Connector type M8 and M12 models
• PNP/NPN NO
Ordering Information
Sensing Body Thread length Output Operation
Size Connection Order code
distance material (overall length) configuration mode
Connector M8 Stainless 27 (40) mm E2A-S08KS02-M5-C1-4
M8 2 mm NPN
3 pin: gold-plated steel 49 (62) mm E2A-S08LS02-M5-C1-4
NO
4 mm Connector M12 Brass-nickel E2A-M12KS04-M1-B1-4
M12 34 (48) mm PNP
8 mm 4 pin: gold-plated plated E2A-M12KN08-M1-B1-4
Specifications
Size M8 M12
Model E2A-S08KS02-M5-C1-4 E2A-S08LS02-M5-C1-4 E2A-M12KS04-M1-B1-4 E2A-M12KN08-M1-B1-4
Sensing mode High-frequency oscillation
Output DC-3 wire
Output type NPN open collector PNP open collector
Sensing surface Shielded Non-shielded
Size M8 M12
Operation mode NO
Indicator operation Yellow LED
Output Output DC-3 wire, 3 pins Output DC-3 wire, 4 pins
Degree of protection IEC60529 IP67
Materials Case Stainless steel Brass-nickel plated
Sensing surface PBT
Connector M8 M12
PIN Bronze(C5441) / Gold-plated contacts
Power supply voltage 12 to 24 VDC; Ripple (p-p) 10% max.
Operating voltage range 10 to 32 VDC
Current consumption 10 mA max.
Sensing distance (Standard target: mild
2 mm±10% 4 mm±10% 8 mm±10%
steel ST37 8×8×1 mm)
Target Ferrous metal (The sensing distance decreases with non-ferrous metal)
Differential travel/Hysteresis 10% max.of sensing distance
Response frequency 1,500 Hz 1,000 Hz 800 Hz
1
D16E-EN-01+E2A-4+Datasheet.fm Seite 2 Montag, 3. September 2012 5:23 17
E2A-4
Size M8 M12
Model E2A-S08KS02-M5-C1-4 E2A-S08LS02-M5-C1-4 E2A-M12KS04-M1-B1-4 E2A-M12KN08-M1-B1-4
Power source circuit reverse polarity
Yes
protection
±10% max. of sensing distance at 23°C within temperature range of –25°C to 70°C
Temperature influence
±15% max. of sensing distance at 23°C within temperature range of –40°C to 70°C
Voltage influence ±1% max. of sensing distance in rated voltage range ±15%
Insulation resistance 50 M min. (at 500 VDC) between current carry parts and case
Dielectric strength 1,000 VAC at 50/60Hz for 1 min between current carry parts and case
Vibration resistance 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y and Z directions
Shock resistance 500 m/s², 10 times each in X, Y and Z directions
Standard Ambient air temperature 23°C
testing
environment Ambient air humidity 65% RH
Note: Refer to latest information of base product E2A-(base product) for specifications, dimensions, engineering data and installation instructions.
Operation
Operation
Model Timing chart Output circuit
Mode
Brown
+V
E2A-S08KS02-M5-C1-4
Load
Proximity (See note 1.) Black
Sensor
main
circuits
M8 connector
(3 pin)
Non-sensing zone Sensing zone Pin Arrangement
Proximity
Blue
Sensor 0V 4
Sensing 1 3
E2A-S08LS02-M5-C1-4 object
Note 1: With M8 connector models, there is no output
reverse polarity protection diode.
(%) 100 0
NPN type
distance
sensing
Rated
NO
Brown
+V
ON
E2A-M12KS04-M1-B1-4 Yellow indicator
OFF
Proximity
ON Sensor
Black
Control output main
M12 Connector
OFF circuits Pin Arrangement
(See note 1.)
Load
Blue 1
0V
2 4
E2A-M12KN08-M1-B1-4 3
Note 1: Terminal 2 of the M12 connector is not used.
PNP type
2
D16E-EN-01+E2A-4+Datasheet.fm Seite 3 Montag, 3. September 2012 5:23 17
E2A-4
Dimensions (Unit: mm)
E2A-S08KS02-M5-C1-4 E2A-S08LS02-M5-C1-4
39 61
27 49
13 3 5 13 3 5
M8×1 M8×1
M8×1 M8×1
Two, clamping nuts
Note: Operation indicator (yellow LED, 4×90)
Note: Operation indicator (yellow LED, 4×90)
E2A-M12KS04-M1-B1-4 E2A-M12KN08-M1-B1-4
48 48
34
34
17 4 7
M12×1 17 4
7 7 M12×1
9.4 dia.
Indicator (See note.)
M12×1 Indicator (See note.)
Two, clamping nuts M12×1
Two, clamping nuts
3
D16E-EN-01+E2A-4+Datasheet.fm Seite 4 Montag, 3. September 2012 5:23 17
E2A-4
Safety Precautions
Precautions for Safe Use
Wiring
@ Warning
Be sure to wire the E2A and load correctly, otherwise it may
This product is not designed or rated for ensuring safety of be damaged.
persons. Do not use it for such purposes.
Connection with No Load
Power Supply
Be sure to insert a load when wiring. Make sure to connect a
Do not impose an excessive voltage on the E2A, otherwise it proper load to the E2A during operation, otherwise it may
maybe damaged. Do not impose AC current (100 to 240 VAC) damage internal elements.
on any DC-model, otherwise it may be damaged.
Do not expose the product to flammable or explosive
Load Short-circuit gases.
Do not short-circuit the load, or the E2A may be damaged. Do not disassemble, repair, or modify the product.
The E2A’s short-circuit protection function will be valid if the
polarity of the supply voltage is correct and within the rated
voltage range.
Designing
n Wiring
d dia.
m
D High-tension Lines
m l
Wiring through Metal Conduit:
Type Dimension M12 If there is a power or high-tension line near the cable of the
l 15 mm
Proximity Sensor, wire the cable through an independent
m 20 mm
Non-shielded d 40 mm metal conduit to prevent against Proximity Sensor damage or
D 15 mm malfunctioning.
n 40 mm
Cable Extension
Power OFF
The standard cable length is less than 200 m.
The Proximity Sensor may output a pulse signal when it is
The tractive force is 50 N.
turned OFF. Therefore, it is recommended that the load is
turned OFF before turning OFF the Proximity Sensor.
4
D16E-EN-01+E2A-4+Datasheet.fm Seite 5 Montag, 3. September 2012 5:23 17
E2A-4
Environment
Water Resistivity
Type Torque
The Proximity Sensors are tested intensively on water
M12 30 Nm resistance, but to ensure maximum performance and life
expectancy, avoid immersion in water and provide protection
Accessories
from rain or snow.
Material Brass-nickel plated
Clamping nut Operating Environment
Number 2 pcs.
Store and operate the Proximity Sensor only within the given
Maintenance and Inspection
specifications.
Periodically perform the following checks to ensure stable
operation of the Proximity Sensor over a long period of time. Inrush Current
1. Check for mounting position, dislocation, looseness, or A load that has a large inrush current (e.g., a lamp or motor)
distortion of the Proximity Sensor and sensing objects. will damage the Proximity Sensor. Connect the load to the
2. Check for loose wiring and connections, improper contacts, Proximity Sensor through a relay
and line breakage.
<CHANGE IN SPECIFICATIONS>
Product specifications and accessories may be changed at any time based on improvements and other reasons. Consult
with your OMRON representative at any time to confirm actual specifications of purchased product.
Notes
APPLICATION CONSIDERATIONS
OMRON MAKES NO WARRANTY OR REPRESENTATION,
1) READ AND UNDERSTAND THIS SPECIFICATION EXPRESS OR IMPLIED, REGARDING NON-
SHEET INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR
PARTICULAR PURPOSE OF THE PRODUCTS. ANY
Please read and understand this sheet before purchasing the BUYER OR USER ACKNOWLEDGES THAT THE BUYER
products. Please consult your OMRON representative if you OR USER ALONE HAS DETERMINED THAT THE
have any questions or comments. PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS
OF THEIR INTENDED USE. OMRON DISCLAIMS ALL
2) WARRANTY
OTHER WARRANTIES, EXPRESS OR IMPLIED.
OMRON's exclusive warranty is that the products are free
from defects in materials and workmanship for a period of one 3) LIMITATIONS OF LIABILITY
year (or other period if specified) from date of sale by OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL,
OMRON. INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF
5
D16E-EN-01+E2A-4+Datasheet.fm Seite 6 Montag, 3. September 2012 5:23 17
E2A-4
PROFITS OR COMMERCIAL LOSS IN ANY WAY NEVER USE THE PRODUCTS FOR AN APPLICATION
CONNECTED WITH THE PRODUCTS, WHETHER SUCH INVOLVING SERIOUS RISK TO LIFE OR PROPERTY
CLAIM IS BASED ON CONTRACT, WARRANTY, WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE
NEGLIGENCE, OR STRICT LIABILITY. HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND
In no event shall responsibility of OMRON for any act exceed THAT THE OMRON PRODUCT IS PROPERLY RATED AND
the individual price of the product on which liability is asserted. INSTALLED FOR THE INTENDED USE WITHIN THE
OVERALL EQUIPMENT OR SYSTEM.
IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR
WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING 5) SPECIFICATION SHEET FOR REFERENCE
THE PRODUCTS UNLESS OMRON'S ANALYSIS
CONFIRMS THAT THE PRODUCTS WERE PROPERLY When you have specification sheet only for Reference,
HANDLED, STORED, INSTALLED, AND MAINTAINED AND OMRON will not inform you of the change in specifications.
NOT SUBJECT TO CONTAMINATION, ABUSE, MISUSE, Please consult with your OMRON representative at any time
OR INAPPROPRIATE MODIFICATION OR REPAIR. to confirm the latest specifications of purchased product.
OMRON shall not be responsible for conformity with any Dimensions and weights are nominal and are not to be used
standards, codes, or regulations that apply to the combination for manufacturing purposes, even when tolerances are
of products in the customer's application or use of the product. shown.
At the customer's request, OMRON will provide applicable 7) ERRORS AND OMISSIONS
third party certification documents identifying ratings and
The information in this document has been carefully checked
limitations of use that apply to the products. This information
and is believed to be accurate; however, no responsibility is
by itself is not sufficient for a complete determination of the
assumed for clerical, typographical, or proofreading errors, or
suitability of the products in combination with the end product,
omissions.
machine, system, or other application or use.
The following are some examples of applications for which 8) PERFORMANCE DATA
particular attention must be given. This is not intended to be
Performance data given in this sheet is provided as a guide for
an exhaustive list of all possible uses of the products, nor is it
the user in determining suitability and does not constitute a
intended to imply that the uses listed may be suitable for the
warranty. It may represent the result of OMRON’s test
products:
conditions, and the users must correlate it to actual
• Outdoor use, uses involving potential chemical application requirements. Actual performance is subject to the
contamination or electrical interference, or conditions or OMRON Warranty and Limitations of Liability.
uses not described in this document.
• Nuclear energy control systems, combustion systems, 9) COPYRIGHT AND COPY PERMISSION
railroad systems, aviation systems, medical equipment,
This document shall not be copied for sales or promotions
amusement machines, vehicles, safety equipment, and
without permission. This document is protected by copyright
installations subject to separate industry or government
and is intended solely for use in conjunction with the product.
regulations.
Please notify us before copying or reproducing this document
• Systems, machines, and equipment that could present a
in any manner, for any other purpose. If copying or
risk to life or property.
transmitting this document to another, please copy or transmit
Please know and observe all prohibitions of use applicable to it in its entirety.
the products.
Cat. No. E96E-EN-01 In the interest of product improvement, specifications are subject to change without notice.
OMRON EUROPE B.V.
Wegalaan 67-69,
NL-2132 JD, Hoofddorp,
The Netherlands
Phone: +31 23 568 13 00
Fax: +31 23 568 13 88
industrial.omron.eu