Professional Documents
Culture Documents
Item-1 7
Item-1 7
Item-1 7
BILL OF QUANTITIES
Name of Work:- Annual maintenance of all Types of Civil Works covering Masonary, Plumbing, Carpentar
Painting, Roads and Support Services works in Township.
3 Removing silt and debris from the R.C.C hume pipes of all dia. 100.00 One Rmt
Provided at the approches to residential and non-residential
buildings, etc., complete all as directed by Engineer-in-
charge.
4 Earth work excavation in all soils except rock requiring blasting 50.00 One Cum
for drains/nallahs etc for all depths and depositing the earth
with in a lead of 10 M and dressing the bottom of excavation to
receives concrete etc complete all as directed by Engineer-in-
charge.
5 CRS masonary 2nd sort in CM 1:6 including curing, cost of all 5.00 One Cum
materials, labour etc complete all as directed by Engineer-in-
charge.
6 Flush pointing to CRS masonary in CM 1:4 including curing, 50.00 One Sqm
cost of all materials, labour etc complete all as directed by
Engineer-in-charge.
7 Precast drain slabs of RCC 1:2:4 nominal mix using 20 mm 15.00 One Cum
guage down graded hard granite metal including centering,
casting, curing etc complete as directed but excluding cost of
steel and its fabrication which will be paid separately.
9 Conveying the pre cast RCC approach slabs at casting yard and 100.00 Each
fixing over open drains wherever necessary in the township, as
directed by the Engineer-in-charge (Size of the covers vary from
1.20 x 0.60 x 0.075 to 1.50 x 0.60 x 0.075).
1 Grass cutting including lighting jungle, collection of stones, 800,000.00 One Sqm
disposing the cut grass and light jungle to places as directed
by the Engineer-in-charge. The rate quoted shall include the
cost of cutting, cleaning, loading, conveyance within a lead of 2
KM to places as directed and spreading etc complete all as
directed by Engineer-in-charge.
2 Fine dressing the ground by using spade and grass cutting 38,000.00 One Sqm
collection of stones, disposing the cut grass as directed by the
engineering charges.
3 Transporting of excavated spoils and debris upto a distance of 10.00 One Cum
3 Km including loading, unloading and spreading in low lying
areas as directed by the Engineer-in-charge.
4 Earth work excavation in all soils except rock requiring blasting 25.00 One Cum
under all conditions with an initial lead of 10 M and intial
depth of 1.00 M and depositing, the same neatly including
dressing the bottom of excavation etc complete as directed by
the Engineer-in-charge.
5 Cutting the hedges around the quarters and public buildings 12000.00 One Rmt
with big scissors, knives etc including clearing and disposing
the cut waste within a lead of 2 km all as directed by the
Engineer-in-charge. The waste materials shall be cleared on
the same day and the rate shall include all tools, transport etc
complete all as directed by Engineer-in-charge.
6 Uprooting and clearing parthinium and other weeds with 25000.00 One Sqm
required tools etc including clearing and disposing the cut
waste within a lead of 2 km all as directed by the Engineer-in-
charge. The waste materials shall be cleared on the same day
and the rate shall include all tools, transport etc. complete all
as directed by Engineer-in-charge.
1 Grass cutting including lighting jungle, collection of stones, 800,000.00 One Sqm
disposing the cut grass and light jungle to places as directed
by the Engineer-in-charge. The rate quoted shall include the
cost of cutting, cleaning, loading, conveyance within a lead of 2
KM to places as directed and spreading etc complete all as
directed by Engineer-in-charge.
2 Fine dressing the ground by using spade and grass cutting 38,000.00 One Sqm
collection of stones, disposing the cut grass as directed by the
engineering charges.
3 Transporting of excavated spoils and debris upto a distance of 10.00 One Cum
3 Km including loading, unloading and spreading in low lying
areas as directed by the Engineer-in-charge.
4 Earth work excavation in all soils except rock requiring blasting 25.00 One Cum
under all conditions with an initial lead of 10 M and intial
depth of 1.00 M and depositing, the same neatly including
dressing the bottom of excavation etc complete as directed by
the Engineer-in-charge.
5 Cutting the hedges around the quarters and public buildings 12000.00 One Rmt
with big scissors, knives etc including clearing and disposing
the cut waste within a lead of 2 km all as directed by the
Engineer-in-charge. The waste materials shall be cleared on
the same day and the rate shall include all tools, transport etc
complete all as directed by Engineer-in-charge.
6 Uprooting and clearing parthinium and other weeds with 25000.00 One Sqm
required tools etc including clearing and disposing the cut
waste within a lead of 2 km all as directed by the Engineer-in-
charge. The waste materials shall be cleared on the same day
and the rate shall include all tools, transport etc. complete all
as directed by Engineer-in-charge.
2 Dismantling the spoiled AC pipes and replacing with approved 500.00 One Rmt
quality new pipes including jointing in CM 1:1, chasing brick
masonary and making good again while replacing etc complete
for pipes for 100mm (4") dia.
3 Dismantling the spoiled AC pipes and replacing with approved 500.00 One Rmt
quality new pipes including jointing in CM 1:1, chasing brick
masonary and making good again while replacing etc complete
for pipes for 75 mm (3") dia.
6 Rectifying the dampness due to leaking joints of Nahany traps 300.00 Each
alkathin / lead pipe connections to W.C's joints in AC pipes
embedded in flooring including chasing brick work / concrete
and making good after repairs in cement mortar including cost
of all materials, curing etc complete for all specials.
d) Supplying and fixing European Water closets of 1st quality 15.00 Each
conforming to IS : 2556 - Part - 2 - 1973 of Hindustan / Neycer
or parryware make white glazed with 'P' trap.
g) Porcelain low down flush tank 3 gallon capacity with all 5.00 Each
internal fittings such as ball cock, union nut etc complete.
i) Orissa Pan of approved make and size 580 x 440 mm. 5.00 Each
k) SWG gully traps 6"x6" or 4"x4" with CI frame and cover. 15.00 Each
k) Providing and fixing PVC low level flushing cistern with 20.00 Each
manualy controlled device (handle lever) conforming to IS :
7231 Parryware / Hindware / Seabird / Orient (Cora) with all
fittings and fixtures complete 10 litre capacity white.
l) Providing and fixing PVC low level flushing cistern with 30.00 Each
manualy controlled device (handle lever) conforming to IS :
7231 Parryware / Hindware / Seabird / Orient (Cora) with all
fittings and fixtures complete 10 litre capacity coloured.
m) Polished shahabad stone sinks of 1/2" thick, 24" x 18" x 7" 75.00 Each
including proper fixing (without fittings).
b) 1/2" C.P. pillar taps (500 gms) SEIKO DELUX HEAVY DUTY. 50.00 Each
h) 3/4" polymer ball cock of ISI make approved brand. 40.00 Each
i) 1/2" polymer ball cock of ISI make approved brand. 25.00 Each
k) CP consealed stop cock 1/2" dia with internal brass threadings. 10.00 Each
l) Hot and cold mixing vlave of SEIKO DELUX make. 5.00 Each
p) C.I grating of size 6"x 4" for gully traps. 10.00 Each
u) 1/2" C.I bib taps with brass internal, turning (Alto brand or 200.00 Each
equivalent).
v) 1/2" Polymet bib taps (PTMT material) prayag make. 75.00 Each
x) PVC shower swing type for the 1/2" or 3/4" pipe (Prayag 40.00 Each
make).
y) 1/2" C.I. stop cock with brass internal turnings (Alto or 15.00 Each
equivalent brand).
z) PVC syphon set suitable for PVC/CI low down flush tank of 10 20.00 Each
litres capacity with all fittings etc.
9 Supply and fixing of superior quality mirror of standard make 10.00 Each
with fibre glass reinforced plastic frame, plastic sheet back and
necessary rubber channel of size 453 x 357 mm. The glass
shall be of minimum 4 mm thick belgium processed and
copper back etc complete.
10 Supplying and fixing in position polythene / alkathin pipe of 15.00 One Rmt
approved quality including suitable jointing, chasing and
breaking of walls and making them good, cost of all materials
etc complete as directed for 31 mm (1 1/4") dia.
11 Supplying and fixing of PVC balls ISI marked for ball cocks in 20.00 Each
over head tanks and flush tanks for 12 mm dia.
12 Supplying and fixing of PVC balls ISI marked for ball cocks in 20.00 Each
over head tanks and flush tanks for 20 mm dia.
13 Supplying laying and fixing in position 4" dia SWG pipes in CM 100.00 One Rmt
1:1 including excavation in all soils except rock requiring
blasting upto a depth of 1.22 M and refilling the trenches with
excavated soils, removing the spoiled SWG pipes to the places
as directed.
14 Removing the existing cement flooring and redoing the same 40.00 One Sqm
with ellis pattern flooring 20 mm thick cement concrete using
one cement and three granite stone shippings of 3 to 10 mm
guage including fine finishing neat thread lining, curing cost of
all materials etc complete as directed.
15 Supplying and fixing CI Nahany trap 76 mm (3") dia in cement 15.00 Each
concrete 1:2:4 and 127 mm (5") dia CI grating hinged to
Nahany trap including breaking of the flooring and redoing the
same wherever necessary etc complete all as directed.
16 Supplying and fixing of GI pipes (Class-A) with all necessary 150.00 One Rmt
fittings including excavation, making holes, fixing clamps
wherever necessary and repairing the holes, refilling the
trenches, cost of all materials etc complete as directed for 15
mm dia (1/2") dia.
17 Supplying and fixing of GI pipes (Class-A) with all necessary 150.00 One Rmt
fittings including excavation, making holes, fixing clamps
wherever necessary and repairing the holes, refilling the
trenches, cost of all materials etc complete as directed for 20
mm dia (3/4") dia.
18 Supplying and fixing of GI pipes (Class-A) with all necessary 75.00 One Rmt
fittings including excavation, making holes, fixing clamps
wherever necessary and repairing the holes, refilling the
trenches, cost of all materials etc complete as directed for 25
mm dia (1") dia.
19 Taking branch water connection from existing G.I pipe line 4.00 Each
including cutting, threading etc complete all as directed from
25 to 40 mm dia size
21 Removing and refixing GI pipe 13 to 40 mm dia including cost 500.00 One Rmt
of jointing materials such as specials like collars, elbows, bends
etc complete.
22 Supplying and fixing G.M peet valves of approved make (ISI 10.00 Each
make) as directed for 12.7 mm dia.
23 Supplying and fixing G.M peet valves of approved make (ISI 10.00 Each
make) as directed for 19 mm dia.
24 Supplying and fixing G.M peet valves of approved make (ISI 10.00 Each
make) as directed for 25 mm dia.
25 Brick work in CM 1:6 in super structure using ground moulded 2.00 One Cum
bricks free from cracks and flaws. The quoted rate shall be for
all thicknesses of walls including curing, cost of all materials
etc complete as directed.
26 Dismantling and replacing A.C. pipes / S.W.G pipes in C.M 1:1 20.00 One Rmt
including earth work excavation, chasing refilling etc, complete.
(Pipe will be issued free of cost at BHEL Store).
27 Dismantling the spoiled C.I pipes and replacing them with 20.00 One Rmt
approved quality new C.I pipes including lead jointing etc
complete for 100 mm dia (4").
28 Dismantling the spoiled C.I pipes and replacing them with 20.00 One Rmt
approved quality new C.I pipes including lead jointing etc
complete for 75 mm dia (3").
e) Specials like 'T' bend, Y bend, double 'Y' junction of 3" to 4" dia. 10.00 Each
30 Providing and placing on terrace (at all floor levels) polyethylene 6.00 Each
water storage tank with double layer approved brand and
manufacture with cover and suitable locking arrangement and
with necessary holes for inlet and outlets and over flow pipes
but without fittings and base support for tanks of 1000 ltr.
capacity.
31 Supplying and fixing 150 mm x 100 mm SWG gully traps of ISI 15.00 Each
make conforming to ISI 165 and 4127 with C.I.Grating and
constg. Brick masonry in CM 1:6 prop. Intermediate chamber
and fitted with 304.8 mm x 288.6 mm C.I. frame and hinged
cover
34 Supplying and fixing 15 mm dia C.P Bib Cocks of approved 10.00 Each
brand including cost of all materials etc complete. Long body
bib cock, SEIKO DELUX HEAVY DUTY.
35 Supplying and fixing 15 mm dia C.P Bib Cocks of approved 12.00 Each
brand including cost of all materials etc complete. Short body
bib cock, SEIKO DELUX HEAVY DUTY.
36 Supplying and fixing 15 mm dia C.P bib cocks with Elbow 5.00 Each
closing handle 8" long of approved brand including cost of all
materials etc complete.
37 Supplying and fixing Telephonic shower including cost of all 10.00 Each
materials and fixtures and fittings etc complete.
38 Supplying and fixing porcelain sink of size 600 x 400 x 250 mm 4.00 Each
of approved make, shape and colour class I quality with CI
brackets painted white CP brass waste coupling of 160 grams
weight CP brass chain with plug. CP brass stop cock die cast
(300 grams weight) PVC connection PVC waste pipes of 32 mm
dia of required length CP brass trap (350 grams weight) with
necessary screws, wooden plugs etc complete including cutting
and making good the walls wherever required.
39 Supplying and fixing coloured porcelain wash hand basin with 4.00 Each
pedestal of approved make, shape and colour class I quality of
size 550 x 400 mm (22" x 16") with CI brackets painted white
CP brass waste coupling of 160 grams weight CP brass chain
with plug, CP brass stop cock die cast (300 grams weight) PVC
connection, PVC waste pipe of 32 mm dia of required length,
CP brass trap (350 grams weight) with necessary screws,
wooden plugs etc, complete including cutting and making good
the walls wherever required.
40 Supplying and fixing coloured porcelain european type water 4.00 Each
closet of approved make and colour with necessary 'p' trap all
necessary fittings etc complete.
41 Supplying and fixing low down porcelain flushing tank 10 Lit 4.00 Each
capacity hindustan sanitary ware / parry / neycer with
internal components.
42 Supplying and fixing of PVC rain water pipes including cost of 10.00 One Rmt
all materials, specials, accessories and clamping with MS
clamps at all heights of the building. The pipe joints are to be
sealed with solvent cement and the pipes are to be as per IS
4935-1981 and should withstand for pressure of 4 kgs / sq.cm.
100 mm (4") dia.
43 Supplying and fixing of PVC rain water pipes including cost of 20.00 One Rmt
all materials, specials, accessories and clamping with MS
clamps at all heights of the building. The pipe joints are to be
sealed with solvent cement and the pipes are to be as per IS
4935-1981 and should withstand for pressure of 4 kgs / sq.cm.
75 mm (3") dia.
44 Cleaning of water tanks of various sizes using minimum 150 1000.00 Operation
gms bleaching powder for each tank of any number of parts
including cost of bleaching powder. (The agency shall make his
own arrangements for tools required and shall repair and
replace the ball cocks damaged while cleaning).
45 Cleaning of AC rain water pipes of all lengths and removing the 50.00 Each
weeds carefully (The agency shall make his own arrangements
for tools required for cleaning, if damaged while cleaning the
agency shall take responsibility for providing a new one).
46 Attending repairs to PVC storage tanks located over the 40.00 Each
buildings by disconnecting the tanks from the existing
connections and repairing the PVC storage tanks with polymet
based soldering etc complete including refixing of tank to the
existing pipe line with necessary GI fittings as directed by the
Engineer-in-charge.
47 Providing PVC storage tank covers located over the buildings to 50.00 Each
suit existing PVC storage tanks with nut and bolts etc
complete.
48 Providing water proofing treatment with latex modified polymet 20.00 One Sqm
based water proofing chemical mixed with cement for RCC
tank and side walls including cleaning the surface from any
loose particles, filling all visible cracks with KEM-PWC (i.e latex
modified polymet based water proofing chemicals with cement
in 1:1½ proportion).
49 Attending to cracks in RCC structures such as slabs, water 25.00 One Rmt
tanks, etc. with required chemical all as directed by Engineer-
in-charge.
50 Cleaning and removing all un wanted things from the roof 20000.00 One Sqm
terrace of various buildings at an elevated level of upto 7 M
height. Rate includes labour, tools, wire brush, brooms,
baskets etc., sweeping and clearing off all dirt, silt, dust, leaves
and other foreign matters etc, with out damaging the terrace
treatment and thereby collecting all the wastes in bags /
caskets, lowering to ground floor with out affecting the working
environment and dumping the same in the near by dust bins /
earmarked areas / low lying areas etc complete. Sweeping
has to be done only as and when necessary. Payment will be
made only for the areas where actually the job was carried out.
Part-B
51 Removing the old WC & supplying & fixing Orissa pan white 50.00 Each
glazed W.C 1st quality ISI marked conforming to IS:2556-part-
3-1981 with "P" or "S" trap 580x440 mm including removal of
old W.C. Hindware/ Parryware/Neycer - ISI Mark all as
directed by Engineer-in-Charge.
52 Providing Brick masonry seat for Orissa pan/India W.C.using 50.00 Each
2nd class bricks as per standard practice all as directed by
Engineer-in-charge.
53 Supply & Fixing Prince/Sudhakar make or equivalent quality 225.00 One Rmt
PVC/SWR pipes (as per ISI standards) 4 kg / cm 2…110 mm
dia OD single socket pipe all as directed by Engineer-in-charge.
58 Providing and laying in position cement concrete of specified 5.00 One Cum
grade excluding the cost of centering and shuttering - All work
in CC 1:2:4 (1cement:2 coarse sand:4 graded stone aggregate
20 mm nominal size) all as directed by Engineer-in-charge.
60 Cement plaster 20 mm 1:4 (1 cement:4 sand) all as directed by 50.00 One Sqm
Engineer-in-charge.
62 Supplying & Fixing CI Nahani traps 1st quality ISI marked 30.00 Each
conforming to IS:1729 - 1979 with C.P. Grating fixing with
white cement as per site requirements with standard practice
100 mm dia inlet-75 mm(3") outlet pipe - 4 kgs. All as directed
by Engineer-in-charge.
63 Supplying & Fixing prince/ Sudhakar make or equivalent 150.00 One Rmt
quality PVC/SWR pipes (as per ISI standards) 4 kgs/sqm, 75
mm dia OD . All as directed by Engineer-in-charge.
2 Dismantling the spoiled AC pipes and replacing with approved 500.00 One Rmt
quality new pipes including jointing in CM 1:1, chasing brick
masonary and making good again while replacing etc complete
for pipes for 100mm (4") dia.
3 Dismantling the spoiled AC pipes and replacing with approved 500.00 One Rmt
quality new pipes including jointing in CM 1:1, chasing brick
masonary and making good again while replacing etc complete
for pipes for 75 mm (3") dia.
6 Rectifying the dampness due to leaking joints of Nahany traps 300.00 Each
alkathin / lead pipe connections to W.C's joints in AC pipes
embedded in flooring including chasing brick work / concrete
and making good after repairs in cement mortar including cost
of all materials, curing etc complete for all specials.
d) Supplying and fixing European Water closets of 1st quality 15.00 Each
conforming to IS : 2556 - Part - 2 - 1973 of Hindustan / Neycer
or parryware make white glazed with 'P' trap.
g) Porcelain low down flush tank 3 gallon capacity with all 5.00 Each
internal fittings such as ball cock, union nut etc complete.
i) Orissa Pan of approved make and size 580 x 440 mm. 5.00 Each
k) SWG gully traps 6"x6" or 4"x4" with CI frame and cover. 15.00 Each
k) Providing and fixing PVC low level flushing cistern with 20.00 Each
manualy controlled device (handle lever) conforming to IS :
7231 Parryware / Hindware / Seabird / Orient (Cora) with all
fittings and fixtures complete 10 litre capacity white.
l) Providing and fixing PVC low level flushing cistern with 30.00 Each
manualy controlled device (handle lever) conforming to IS :
7231 Parryware / Hindware / Seabird / Orient (Cora) with all
fittings and fixtures complete 10 litre capacity coloured.
m) Polished shahabad stone sinks of 1/2" thick, 24" x 18" x 7" 75.00 Each
including proper fixing (without fittings).
b) 1/2" C.P. pillar taps (500 gms) SEIKO DELUX HEAVY DUTY. 50.00 Each
h) 3/4" polymer ball cock of ISI make approved brand. 40.00 Each
i) 1/2" polymer ball cock of ISI make approved brand. 25.00 Each
k) CP consealed stop cock 1/2" dia with internal brass threadings. 10.00 Each
l) Hot and cold mixing vlave of SEIKO DELUX make. 5.00 Each
p) C.I grating of size 6"x 4" for gully traps. 10.00 Each
u) 1/2" C.I bib taps with brass internal, turning (Alto brand or 200.00 Each
equivalent).
v) 1/2" Polymet bib taps (PTMT material) prayag make. 75.00 Each
x) PVC shower swing type for the 1/2" or 3/4" pipe (Prayag 40.00 Each
make).
y) 1/2" C.I. stop cock with brass internal turnings (Alto or 15.00 Each
equivalent brand).
z) PVC syphon set suitable for PVC/CI low down flush tank of 10 20.00 Each
litres capacity with all fittings etc.
9 Supply and fixing of superior quality mirror of standard make 10.00 Each
with fibre glass reinforced plastic frame, plastic sheet back and
necessary rubber channel of size 453 x 357 mm. The glass
shall be of minimum 4 mm thick belgium processed and
copper back etc complete.
10 Supplying and fixing in position polythene / alkathin pipe of 15.00 One Rmt
approved quality including suitable jointing, chasing and
breaking of walls and making them good, cost of all materials
etc complete as directed for 31 mm (1 1/4") dia.
11 Supplying and fixing of PVC balls ISI marked for ball cocks in 20.00 Each
over head tanks and flush tanks for 12 mm dia.
12 Supplying and fixing of PVC balls ISI marked for ball cocks in 20.00 Each
over head tanks and flush tanks for 20 mm dia.
13 Supplying laying and fixing in position 4" dia SWG pipes in CM 100.00 One Rmt
1:1 including excavation in all soils except rock requiring
blasting upto a depth of 1.22 M and refilling the trenches with
excavated soils, removing the spoiled SWG pipes to the places
as directed.
14 Removing the existing cement flooring and redoing the same 40.00 One Sqm
with ellis pattern flooring 20 mm thick cement concrete using
one cement and three granite stone shippings of 3 to 10 mm
guage including fine finishing neat thread lining, curing cost of
all materials etc complete as directed.
15 Supplying and fixing CI Nahany trap 76 mm (3") dia in cement 15.00 Each
concrete 1:2:4 and 127 mm (5") dia CI grating hinged to
Nahany trap including breaking of the flooring and redoing the
same wherever necessary etc complete all as directed.
16 Supplying and fixing of GI pipes (Class-A) with all necessary 150.00 One Rmt
fittings including excavation, making holes, fixing clamps
wherever necessary and repairing the holes, refilling the
trenches, cost of all materials etc complete as directed for 15
mm dia (1/2") dia.
17 Supplying and fixing of GI pipes (Class-A) with all necessary 150.00 One Rmt
fittings including excavation, making holes, fixing clamps
wherever necessary and repairing the holes, refilling the
trenches, cost of all materials etc complete as directed for 20
mm dia (3/4") dia.
18 Supplying and fixing of GI pipes (Class-A) with all necessary 75.00 One Rmt
fittings including excavation, making holes, fixing clamps
wherever necessary and repairing the holes, refilling the
trenches, cost of all materials etc complete as directed for 25
mm dia (1") dia.
19 Taking branch water connection from existing G.I pipe line 4.00 Each
including cutting, threading etc complete all as directed from
25 to 40 mm dia size
21 Removing and refixing GI pipe 13 to 40 mm dia including cost 500.00 One Rmt
of jointing materials such as specials like collars, elbows, bends
etc complete.
22 Supplying and fixing G.M peet valves of approved make (ISI 10.00 Each
make) as directed for 12.7 mm dia.
23 Supplying and fixing G.M peet valves of approved make (ISI 10.00 Each
make) as directed for 19 mm dia.
24 Supplying and fixing G.M peet valves of approved make (ISI 10.00 Each
make) as directed for 25 mm dia.
25 Brick work in CM 1:6 in super structure using ground moulded 2.00 One Cum
bricks free from cracks and flaws. The quoted rate shall be for
all thicknesses of walls including curing, cost of all materials
etc complete as directed.
26 Dismantling and replacing A.C. pipes / S.W.G pipes in C.M 1:1 20.00 One Rmt
including earth work excavation, chasing refilling etc, complete.
(Pipe will be issued free of cost at BHEL Store).
27 Dismantling the spoiled C.I pipes and replacing them with 20.00 One Rmt
approved quality new C.I pipes including lead jointing etc
complete for 100 mm dia (4").
28 Dismantling the spoiled C.I pipes and replacing them with 20.00 One Rmt
approved quality new C.I pipes including lead jointing etc
complete for 75 mm dia (3").
e) Specials like 'T' bend, Y bend, double 'Y' junction of 3" to 4" dia. 10.00 Each
30 Providing and placing on terrace (at all floor levels) polyethylene 6.00 Each
water storage tank with double layer approved brand and
manufacture with cover and suitable locking arrangement and
with necessary holes for inlet and outlets and over flow pipes
but without fittings and base support for tanks of 1000 ltr.
capacity.
31 Supplying and fixing 150 mm x 100 mm SWG gully traps of ISI 15.00 Each
make conforming to ISI 165 and 4127 with C.I.Grating and
constg. Brick masonry in CM 1:6 prop. Intermediate chamber
and fitted with 304.8 mm x 288.6 mm C.I. frame and hinged
cover
34 Supplying and fixing 15 mm dia C.P Bib Cocks of approved 10.00 Each
brand including cost of all materials etc complete. Long body
bib cock, SEIKO DELUX HEAVY DUTY.
35 Supplying and fixing 15 mm dia C.P Bib Cocks of approved 12.00 Each
brand including cost of all materials etc complete. Short body
bib cock, SEIKO DELUX HEAVY DUTY.
36 Supplying and fixing 15 mm dia C.P bib cocks with Elbow 5.00 Each
closing handle 8" long of approved brand including cost of all
materials etc complete.
37 Supplying and fixing Telephonic shower including cost of all 10.00 Each
materials and fixtures and fittings etc complete.
38 Supplying and fixing porcelain sink of size 600 x 400 x 250 mm 4.00 Each
of approved make, shape and colour class I quality with CI
brackets painted white CP brass waste coupling of 160 grams
weight CP brass chain with plug. CP brass stop cock die cast
(300 grams weight) PVC connection PVC waste pipes of 32 mm
dia of required length CP brass trap (350 grams weight) with
necessary screws, wooden plugs etc complete including cutting
and making good the walls wherever required.
39 Supplying and fixing coloured porcelain wash hand basin with 4.00 Each
pedestal of approved make, shape and colour class I quality of
size 550 x 400 mm (22" x 16") with CI brackets painted white
CP brass waste coupling of 160 grams weight CP brass chain
with plug, CP brass stop cock die cast (300 grams weight) PVC
connection, PVC waste pipe of 32 mm dia of required length,
CP brass trap (350 grams weight) with necessary screws,
wooden plugs etc, complete including cutting and making good
the walls wherever required.
40 Supplying and fixing coloured porcelain european type water 4.00 Each
closet of approved make and colour with necessary 'p' trap all
necessary fittings etc complete.
41 Supplying and fixing low down porcelain flushing tank 10 Lit 4.00 Each
capacity hindustan sanitary ware / parry / neycer with
internal components.
42 Supplying and fixing of PVC rain water pipes including cost of 10.00 One Rmt
all materials, specials, accessories and clamping with MS
clamps at all heights of the building. The pipe joints are to be
sealed with solvent cement and the pipes are to be as per IS
4935-1981 and should withstand for pressure of 4 kgs / sq.cm.
100 mm (4") dia.
43 Supplying and fixing of PVC rain water pipes including cost of 20.00 One Rmt
all materials, specials, accessories and clamping with MS
clamps at all heights of the building. The pipe joints are to be
sealed with solvent cement and the pipes are to be as per IS
4935-1981 and should withstand for pressure of 4 kgs / sq.cm.
75 mm (3") dia.
44 Cleaning of water tanks of various sizes using minimum 150 1000.00 Opern
gms bleaching powder for each tank of any number of parts
including cost of bleaching powder. (The agency shall make his
own arrangements for tools required and shall repair and
replace the ball cocks damaged while cleaning).
45 Cleaning of AC rain water pipes of all lengths and removing the 50.00 Each
weeds carefully (The agency shall make his own arrangements
for tools required for cleaning, if damaged while cleaning the
agency shall take responsibility for providing a new one).
46 Attending repairs to PVC storage tanks located over the 40.00 Each
buildings by disconnecting the tanks from the existing
connections and repairing the PVC storage tanks with polymet
based soldering etc complete including refixing of tank to the
existing pipe line with necessary GI fittings as directed by the
Engineer-in-charge.
47 Providing PVC storage tank covers located over the buildings to 50.00 Each
suit existing PVC storage tanks with nut and bolts etc
complete.
48 Providing water proofing treatment with latex modified polymet 20.00 One Sqm
based water proofing chemical mixed with cement for RCC
tank and side walls including cleaning the surface from any
loose particles, filling all visible cracks with KEM-PWC (i.e latex
modified polymet based water proofing chemicals with cement
in 1:1½ proportion).
49 Attending to cracks in RCC structures such as slabs, water 25.00 One Rmt
tanks, etc. with required chemical all as directed by Engineer-
in-charge.
50 Cleaning and removing all un wanted things from the roof 20000.00 One Sqm
terrace of various buildings at an elevated level of upto 7 M
height. Rate includes labour, tools, wire brush, brooms,
baskets etc., sweeping and clearing off all dirt, silt, dust, leaves
and other foreign matters etc, with out damaging the terrace
treatment and thereby collecting all the wastes in bags /
caskets, lowering to ground floor with out affecting the working
environment and dumping the same in the near by dust bins /
earmarked areas / low lying areas etc complete. Sweeping
has to be done only as and when necessary. Payment will be
made only for the areas where actually the job was carried out.
Part-B
51 Removing the old WC & supplying & fixing Orissa pan white 50.00 Each
glazed W.C 1st quality ISI marked conforming to IS:2556-part-
3-1981 with "P" or "S" trap 580x440 mm including removal of
old W.C. Hindware/ Parryware/Neycer - ISI Mark all as
directed by Engineer-in-Charge.
52 Providing Brick masonry seat for Orissa pan/India W.C.using 50.00 Each
2nd class bricks as per standard practice all as directed by
Engineer-in-charge.
53 Supply & Fixing Prince/Sudhakar make or equivalent quality 225.00 One RMT
PVC/SWR pipes (as per ISI standards) 4 kg / cm 2…110 mm
dia OD single socket pipe all as directed by Engineer-in-charge.
58 Providing and laying in position cement concrete of specified 5.00 One Cum
grade excluding the cost of centering and shuttering - All work
in CC 1:2:4 (1cement:2 coarse sand:4 graded stone aggregate
20 mm nominal size) all as directed by Engineer-in-charge.
60 Cement plaster 20 mm 1:4 (1 cement:4 sand) all as directed by 50.00 One Sqm
Engineer-in-charge.
61 Demolishing brick work in Cement Mortar manually or by 10.00 One Cum
mechanical means including stacking of serviceble material
and disposal of unserviceable material within 50 metres lead as
per direction of Engineer-in-charge.
62 Supplying & Fixing CI Nahani traps 1st quality ISI marked 30.00 Each
conforming to IS:1729 - 1979 with C.P. Grating fixing with
white cement as per site requirements with standard practice
100 mm dia inlet-75 mm(3") outlet pipe - 4 kgs. All as directed
by Engineer-in-charge.
63 Supplying & Fixing prince/ Sudhakar make or equivalent 150.00 One Rmt
quality PVC/SWR pipes (as per ISI standards) 4 kgs/sqm, 75
mm dia OD . All as directed by Engineer-in-charge.
1 Earth work excavation up to a depth of 1.50 m and disposal 15.00 One Cum
of excavated earth upto 50 m and lift upto 1.5 m disposed soil
to be levelled and neatly dressed for all kinds of soil.
2 Cement concrete 1:5:10 mix using 40mm IRC gauge down 10.00 One Cum
graded granite stone metal in foundation etc. including
consolidation, curing, cost of all materials etc. complete.
3 Dismantling the existing plain cement concrete 1:5:10 / 1:3:6 5.00 One Cum
or 1:4:8 base and disposing of the debries upto a distance of 2
km. including loading, unloading and spreading in lowlying
area as directed by the Engineer-in-charge.
4 Brick work in CM 1: 6 using ground moulded bricks for all 5.00 One Cum
thicknesses of walls including curing, cost of all materials etc.
complete.
6 Fixing AC sheet roofing and ceiling using 'J' bolts, nuts, 500.00 One Sqm
bitumen / GI washers etc.complete as directed. (only AC sheets
and ridges will be supplied free of cost at BHEL stores).
7 Dismantling cement asbestos, Celotix or other hard board 300.00 One Sqm
ceiling or partition walls including stacking of serviceable
materials and disposal of unserviceable materials within the
township etc complete all as directed by Engineer-in-charge
9 Dismantling steel work in built up sections in angles, tees, flats 4000.00 One Kg
and channels including all gusset plates, bolts, nuts, cutting
rivets, welding etc including dismembering and stacking within
township area etc comple all as directed by Engineer-in-charge.
10 Repairing of car garrage shutters with M.S. Rounds / Channels 40.00 Each
/ Pipes / Sheet of 3.00 x 2.50 M approx.
11 Manufacturing and fixing the garrage shutters of size 40.00 Each
3.00x2.50M with M.S angles, M.S pipes, M.S sheet which will
be supplied free of cost.
12 Fabricating and fixing of MS grill gates / door shutters of single 3000.00 One Kg
leaf / double leaves, window or door frames / ornamental
grills, tubular / structural trusses, columns, gates etc, in
position and shall be of approved quality and design including
cost of fittings, fixtures and furniture, redoxide primer coat
etc., complete as directed. (Raw steel will be issued by BHEL
free of cost at stores.)
13 Painting to iron work with two coats of synthetic enamel paint 125.00 One Sqm
of approved brand and shade including cost of all materials etc.
complete as directed.
14 Painting on G.I/M.S sheet with synthetic enamel paint of 50.00 One Sqm
approved brand and manufacture of required colour to give an
even shade. New work (two or more coats) including a coat of
approved steel primer but excluding a coat of mordant solution.
15 Site welding 6 mm fillet / tack including cost of required 25.00 One Rmt
materials at all the places as directed.
17 Erection of steel work including the charges for handling, 12000.00 One Kg
loading and stacking at the site at approved location prior to
erection
20 Repairing the existing M.S grill gates / door shutters of single 70.00 Each
leaf / double leaves, window or door frames, M.S ornamenatal
M.S grills, M.S tubular trusses, M.S structural / tubular gates
in position including welding, cost of all fittings, fixures like peg
stays, handles, pivot hinges etc. for windows, towerbolts,
aldrops, hinges, locking hooks etc, for doors, complete as
directed by Engineer-in-charge.
22 Supply and fixing of Gate eyes of approved design including 15.00 Each
cost of all materials etc complete all as directed by Engineer-in-
charge.
23 Supply and fixing of M.S.Aldrop for Gates by welding etc 40.00 Each
complete, all as directed by Engineer-in-charge.
2 Demolishing cement concrete (plain) and disposing off spoils 15.00 One Cum
upto a distance of 2 Kms etc complete as directed by Engineer-
in-charge.
3 Demolishing the existing R.C.C and disposing off spoils upto a 10.00 One Cum
distance of 2 Km, handing over of useful materials in stores
etc complete as directed by Engineer-in-charge.
4 Dismantling stone slab flooring laid in cement mortar including 75.00 One Sqm
stacking and handing over of serviceable material and disposal
of unserviceable material within 2 km lead etc complete all as
directed by Engineer-in-charge.
5 Demolishing brick work in cement mortar including stacking 25.00 One Cum
of serviceable material and disposal of unserviceable material
within 50 metres lead etc complete all as directed by Engineer-
in-charge.
6 Dismantling old cement plaster raking out joints and cleaning 200.00 One Sqm
the surface for plaster including disposal of rubbish to the
dumping ground within 2 km lead etc complete all as directed
by Engineer-in-charge.
7 Dismantling the existing cement plaster and redoing the same, 1200.00 One Sqm
plastering in C.M 1:6, 20 mm thick etc complete all as directed
by Engineer-in-charge including disposal of spoils upto 2 km
lead.
8 Dismantling the existing plaster and redoing the same with CM 250.00 One Sqm
1:4, 20mm thick etc complete as directed by Engineer-in-
charge including disposal of spoils upto 2 km lead all as
directed by Engineer-in-charge.
9 Conveyance of spoils upto a distance of 3 Kms icluding loading, 100.00 One Cum
unloading and spreading in low lying areas etc complete all as
directed by Engineer-in-charge.
10 Damp proof course in cement mortar 1:4, 20 mm thick mixed 25.00 One Sqm
with best water proofing compound of approved brand at the
rate of 2% by weight of cement, neat finishing, curing etc,
complete all as directed by Engineer-in-charge.
11 Coursed rubble stone masonary 2nd sort with hard granite 30.00 One Cum
stone in foundation and plinth with cement mortar 1:6 (1
cement : 6 coarse sand) including curing cost of all materials
as directed by Engineer-in-charge.
12 Flush Pointing on stone work with cement mortar 1:3 (1 75.00 One Sqm
cement : 3 fine sand) including curing etc complete all as
directed by Engineer-in-charge.
13 Refilling the foundation and basement with excavated soils 150.00 One Cum
including watering, consolidation etc complete all as directed
by Engineer-in-charge.
14 Brick work with ground moulded bricks in cement mortar 1:6 40.00 One Cum
(1 cement : 6 coarse sand) including curing, cost of all
materials etc complete all as directed by Engineer-in-charge.
15 Plastering in cement mortar 1:6, 20 mm thick including curing, 500.00 One Sqm
cost of all materials etc, complete all as directed by Engineer-
in-charge
17 Plain Cement concrete 1:5:10 mix using 40 mm guage down 40.00 One Cum
graded hard machine crushed granite metal including curing,
cost of all materials etc, complete all as directed by Engineer-
in-charge
18 Reinforced cement concrete work for all items upto floor five 6.00 One Cum
level excluding cost of centring shuttering, finishing and
reinforcement mix. 1:2:4 (1 cement : 2 coarse sand : 4 graded
hard granite stone aggregate 20 mm nominal size) including
curing etc complete all as directed by Engineer-in-charge.
19 Providing and laying plain cement concrete for all items upto 13.00 One Cum
floor five level, excluding the cost of centring shuttering and
finishing. 1:2:4 (1 cement : 2 coarse sand : 4 hard granite
graded stone aggregate 20 mm nominal size) including curing,
etc complete all as directed by Engineer-in-charge
21 Providing steel / plywood shuttering with necessary oil coat to 100.00 One Sqm
give smooth and even surface including centering, strutting,
proping etc and removal of form work for cast in situ concrete
etc complete all as directed by Engineer-in-charge.
b Suspended floors, roofs, landings, balconies, access plat form 50.00 One Sqm
and sunshades.
c Lintels, beams, plinth beams, girders, bressumers and 50.00 One Sqm
cantilevers.
d Columns, Pillars, Piers, Abutments, Posts and struts. 50.00 One Sqm
22 Providing gultas in traingular shape of base 150 mm and 200.00 One Rmt
height 150 mm with cement mortar 1:4, including fine
finishing, cost of all materials etc complete all as directed by
Engineer-in-charge.
23 Providng bands to slab / chajja projections in cement mortar 100.00 One Rmt
1:4, 20 mm thick and 20 mm wide including cost of all
materials, curing etc complete all as directed by Engineer-in-
charge.
24 Flooring and skirting with 25 mm uniform shade and thick 10.00 One Sqm
polished shahabad stone slabs (Tandur blue) of required sizes
over a base of 20 mm thick cement mortar 1:6 including
pointing in CM 1:2, curing, cost of all materials etc complete
all as directed by Engineer-in-charge
25 Removing the existing cement / mosaic / floor finishing and 300.00 One Sqm
redoing the same with 20 mm thick ellis pattern flooring in
cement concrete using one cement and three granite stone
chippings of 3 to 10 mm guage including fine finishing, neat
thread lining, curing cost of all materials, disposing off the
spoils within a lead of 2 kms etc complete as directed by the
Engineer-in-charge.
26 Ellis pattern flooring with 20 mm thick cement concrete using 200.00 One Sqm
one cement and 3 granite stone chipping of 3 to 10 mm guage
including fine finishing, neat thread lining, curing, cost of all
materials etc complete as directed by Engineer-in-charge.
27 Dismantling the existing black boards and providing new black 10.00 One Sqm
boards in CM 1:4, 12 mm thick, mixed with 5 kgs of black
oxide powder to 50 kgs of cement including neat finishing and
painting in two coats with black board paint of approved brand
over a coat of primer including cost of all materials and
disposing off spoils upto a distance of 2 kms etc complete as
directed by the Engineer-in-charge.
28 Fixing of C.T. wood door / steel door with frames and shutters, 10.00 One Sqm
M.S fixtures and furniture including removing the old one from
the existing position wherever necessary etc complete. The
door frames, shutters, M.S.fixtures and furniture will be
supplied free of cost at divisional stores, if new ones are to be
fixed. Removed materials are to be handed over in stores.
29 Fixing of C.T. wood window / steel windows with frames and 10.00 One Sqm
shutters, M.S fixtures and furniture including removing the
old one from the existing position wherever necessary etc
complete. The window frames, shutters, M.S.fixtures and
furniture will be supplied free of cost at divisional stores, if new
ones are to be fixed. Removed materials are to be handed over
in stores.
31 Dismantling cement asbestos, Celotax or other hard board 25.00 One Sqm
ceiling or partition walls including stacking of serviceabe
materials and disposal of unserviceable materials within 50
meters lead as directed by Engineer-in-charge.
33 Conveying, supplying, laying and fixing of AC sheets and 5.00 One Sqm
accessories of approved brand in position with 'J' bolts,
bitumen/G.I washers etc., complete with or without ridges
etc., complete (AC Sheets, Accessories will be issued free of cost
at BHEL stores).
34 Dismantling old plaster, Raking the existing roof slab, exposing 1000.00 One Sqm
the concrete neatly. Providing impervious coat in CM 1:4,
20mm thick using approved water proofing compound at one
Kg/bag of cement when the roof slab is green including
arranging proper slopes, for easy flow of rain water, curing etc
complete. including disposal of spoils within 2 km lead.
35 Providing 50 mm thick purdi walls and side drops in CM 1:4 at 10.00 One Sqm
all floors including cost of form work, supplying and tying of
chickenmesh net to reinforcement, cost of binding wire and
providing border bands and openings if any, curing etc.,
complete but excluding cost and fabrication of M.S.
reinforcement which will be paid for separately.
36 Providing impervious coat in CM 1:4, 20mm thick using 100.00 One Sqm
approved water proofing compound at one Kg/bag of cement
when the roof slab is green including arranging proper slopes,
for easy flow of rain water, curing etc complete.
37 Half brick masonary with ground moulded bricks in plinth and 5.00 One Sqm
foundations in CM 1:4 including curing, cost of all materials
etc complete as directed by Engineer-in-charge.
38 6 mm cement plaster in cement mortar 1:3 finsihed with a 100.00 One Sqm
floating coat of neat cement including curring cost of all
materials all as directed by Engineer-in-charge.
39 Reinforced cement concrete work for all items upto floor five 2.00 One Cum
level excluding cost of centring shuttering, finishing and
reinforcement. 1:1. 5:3 (1 cement 1.5 coarse sand : 3 graded
hard granite stone aggregate 20 mm nominal size) including
curing cost of all materials etc complete all as directed by
Engineer-in-charge
40 Rectifying the wall cracks by chipping off the existing plastered 50.00 One Sqm
surfaces to the required width, depth and applying cement
slurry in the cracks to the required depth, making good all
damages and finishing to match with the existing one by
plastering with CM 1:5; 12/15 mm thick and a coat of white
wash / snowcem / distemper etc as the case may be as
directed by the Engineer-in-charge.
1 Earth work excavation including disposal of excavated earth 100.00 One Cum
upto 50 m and lift upto 1.5 m disposed soil to be levelled and
neatly dressed, for all kinds of soils etc complete all as directed
by Engineer-in-charge.
2 Demolishing cement concrete (plain) and disposing off spoils 15.00 One Cum
upto a distance of 2 Kms etc complete as directed by Engineer-
in-charge.
3 Demolishing the existing R.C.C and disposing off spoils upto a 10.00 One Cum
distance of 2 Km, handing over of useful materials in stores
etc complete as directed by Engineer-in-charge.
4 Dismantling stone slab flooring laid in cement mortar including 75.00 One Sqm
stacking and handing over of serviceable material and disposal
of unserviceable material within 2 km lead etc complete all as
directed by Engineer-in-charge.
5 Demolishing brick work in cement mortar including stacking 25.00 One Cum
of serviceable material and disposal of unserviceable material
within 50 metres lead etc complete all as directed by Engineer-
in-charge.
6 Dismantling old cement plaster raking out joints and cleaning 200.00 One Sqm
the surface for plaster including disposal of rubbish to the
dumping ground within 2 km lead etc complete all as directed
by Engineer-in-charge.
7 Dismantling the existing cement plaster and redoing the same, 1200.00 One Sqm
plastering in C.M 1:6, 20 mm thick etc complete all as directed
by Engineer-in-charge including disposal of spoils upto 2 km
lead.
8 Dismantling the existing plaster and redoing the same with CM 250.00 One Sqm
1:4, 20mm thick etc complete as directed by Engineer-in-
charge including disposal of spoils upto 2 km lead all as
directed by Engineer-in-charge.
9 Conveyance of spoils upto a distance of 3 Kms icluding loading, 100.00 One Cum
unloading and spreading in low lying areas etc complete all as
directed by Engineer-in-charge.
10 Damp proof course in cement mortar 1:4, 20 mm thick mixed 25.00 One Sqm
with best water proofing compound of approved brand at the
rate of 2% by weight of cement, neat finishing, curing etc,
complete all as directed by Engineer-in-charge.
11 Coursed rubble stone masonary 2nd sort with hard granite 30.00 One Cum
stone in foundation and plinth with cement mortar 1:6 (1
cement : 6 coarse sand) including curing cost of all materials
as directed by Engineer-in-charge.
12 Flush Pointing on stone work with cement mortar 1:3 (1 75.00 One Sqm
cement : 3 fine sand) including curing etc complete all as
directed by Engineer-in-charge.
13 Refilling the foundation and basement with excavated soils 150.00 One Cum
including watering, consolidation etc complete all as directed
by Engineer-in-charge.
14 Brick work with ground moulded bricks in cement mortar 1:6 40.00 One Cum
(1 cement : 6 coarse sand) including curing, cost of all
materials etc complete all as directed by Engineer-in-charge.
15 Plastering in cement mortar 1:6, 20 mm thick including curing, 500.00 One Sqm
cost of all materials etc, complete all as directed by Engineer-
in-charge
17 Plain Cement concrete 1:5:10 mix using 40 mm guage down 40.00 One Cum
graded hard machine crushed granite metal including curing,
cost of all materials etc, complete all as directed by Engineer-
in-charge
18 Reinforced cement concrete work for all items upto floor five 6.00 One Cum
level excluding cost of centring shuttering, finishing and
reinforcement mix. 1:2:4 (1 cement : 2 coarse sand : 4 graded
hard granite stone aggregate 20 mm nominal size) including
curing etc complete all as directed by Engineer-in-charge.
19 Providing and laying plain cement concrete for all items upto 13.00 One Cum
floor five level, excluding the cost of centring shuttering and
finishing. 1:2:4 (1 cement : 2 coarse sand : 4 hard granite
graded stone aggregate 20 mm nominal size) including curing,
etc complete all as directed by Engineer-in-charge
21 Providing steel / plywood shuttering with necessary oil coat to 100.00 One Sqm
give smooth and even surface including centering, strutting,
proping etc and removal of form work for cast in situ concrete
etc complete all as directed by Engineer-in-charge.
b Suspended floors, roofs, landings, balconies, access plat form 50.00 One Sqm
and sunshades.
c Lintels, beams, plinth beams, girders, bressumers and 50.00 One Sqm
cantilevers.
d Columns, Pillars, Piers, Abutments, Posts and struts. 50.00 One Sqm
22 Providing gultas in traingular shape of base 150 mm and 200.00 One Rmt
height 150 mm with cement mortar 1:4, including fine
finishing, cost of all materials etc complete all as directed by
Engineer-in-charge.
23 Providng bands to slab / chajja projections in cement mortar 100.00 One Rmt
1:4, 20 mm thick and 20 mm wide including cost of all
materials, curing etc complete all as directed by Engineer-in-
charge.
24 Flooring and skirting with 25 mm uniform shade and thick 10.00 One Sqm
polished shahabad stone slabs (Tandur blue) of required sizes
over a base of 20 mm thick cement mortar 1:6 including
pointing in CM 1:2, curing, cost of all materials etc complete
all as directed by Engineer-in-charge
25 Removing the existing cement / mosaic / floor finishing and 300.00 One Sqm
redoing the same with 20 mm thick ellis pattern flooring in
cement concrete using one cement and three granite stone
chippings of 3 to 10 mm guage including fine finishing, neat
thread lining, curing cost of all materials, disposing off the
spoils within a lead of 2 kms etc complete as directed by the
Engineer-in-charge.
26 Ellis pattern flooring with 20 mm thick cement concrete using 200.00 One Sqm
one cement and 3 granite stone chipping of 3 to 10 mm guage
including fine finishing, neat thread lining, curing, cost of all
materials etc complete as directed by Engineer-in-charge.
27 Dismantling the existing black boards and providing new black 10.00 One Sqm
boards in CM 1:4, 12 mm thick, mixed with 5 kgs of black
oxide powder to 50 kgs of cement including neat finishing and
painting in two coats with black board paint of approved brand
over a coat of primer including cost of all materials and
disposing off spoils upto a distance of 2 kms etc complete as
directed by the Engineer-in-charge.
28 Fixing of C.T. wood door / steel door with frames and shutters, 10.00 One Sqm
M.S fixtures and furniture including removing the old one from
the existing position wherever necessary etc complete. The
door frames, shutters, M.S.fixtures and furniture will be
supplied free of cost at divisional stores, if new ones are to be
fixed. Removed materials are to be handed over in stores.
29 Fixing of C.T. wood window / steel windows with frames and 10.00 One Sqm
shutters, M.S fixtures and furniture including removing the
old one from the existing position wherever necessary etc
complete. The window frames, shutters, M.S.fixtures and
furniture will be supplied free of cost at divisional stores, if new
ones are to be fixed. Removed materials are to be handed over
in stores.
31 Dismantling cement asbestos, Celotax or other hard board 25.00 One Sqm
ceiling or partition walls including stacking of serviceabe
materials and disposal of unserviceable materials within 50
meters lead as directed by Engineer-in-charge.
33 Conveying, supplying, laying and fixing of AC sheets and 5.00 One Sqm
accessories of approved brand in position with 'J' bolts,
bitumen/G.I washers etc., complete with or without ridges
etc., complete (AC Sheets, Accessories will be issued free of cost
at BHEL stores).
34 Dismantling old plaster, Raking the existing roof slab, exposing 1000.00 One Sqm
the concrete neatly. Providing impervious coat in CM 1:4,
20mm thick using approved water proofing compound at one
Kg/bag of cement when the roof slab is green including
arranging proper slopes, for easy flow of rain water, curing etc
complete. including disposal of spoils within 2 km lead.
35 Providing 50 mm thick purdi walls and side drops in CM 1:4 at 10.00 One Sqm
all floors including cost of form work, supplying and tying of
chickenmesh net to reinforcement, cost of binding wire and
providing border bands and openings if any, curing etc.,
complete but excluding cost and fabrication of M.S.
reinforcement which will be paid for separately.
36 Providing impervious coat in CM 1:4, 20mm thick using 100.00 One Sqm
approved water proofing compound at one Kg/bag of cement
when the roof slab is green including arranging proper slopes,
for easy flow of rain water, curing etc complete.
37 Half brick masonary with ground moulded bricks in plinth and 5.00 One Sqm
foundations in CM 1:4 including curing, cost of all materials
etc complete as directed by Engineer-in-charge.
38 6 mm cement plaster in cement mortar 1:3 finsihed with a 100.00 One Sqm
floating coat of neat cement including curring cost of all
materials all as directed by Engineer-in-charge.
39 Reinforced cement concrete work for all items upto floor five 2.00 One Cum
level excluding cost of centring shuttering, finishing and
reinforcement. 1:1. 5:3 (1 cement 1.5 coarse sand : 3 graded
hard granite stone aggregate 20 mm nominal size) including
curing cost of all materials etc complete all as directed by
Engineer-in-charge
40 Rectifying the wall cracks by chipping off the existing plastered 50.00 One Sqm
surfaces to the required width, depth and applying cement
slurry in the cracks to the required depth, making good all
damages and finishing to match with the existing one by
plastering with CM 1:5; 12/15 mm thick and a coat of white
wash / snowcem / distemper etc as the case may be as
directed by the Engineer-in-charge.
2 Dismantling tile work in floor and roofs laid in cement mortar 75.00 One Sqm
including stacking material within 50 meters lead. For
thickness of tiles 10 mm to 25 mm.
4 Filling available excavated earth (excluding rock) in trenches, 15.00 One Cum
plinth, sides of foundations etc. in layers not exceeding 20 cm
in depth, consolidating each deposited layer by ramming and
watering, lead up to 50 m and lift up to 1.5 m etc complete.
5 Conveyance of murram and filling and consolidation of muram 15.00 One Cum
in foundations and basement including cost and conveyance to
site within a lead of 3 km etc complete as directed by Enginer-
in-charge.
6 Providing and laying in position cement concrete of specified 40.00 One Cum
grade excluding the cost of centring and shuttering. All work
upto plinth level. 1:5:10 (1 cement 5 fine sand 10 graded stone
aggregate 40 mm nominal size).
7 Providing and laying in position cement concrete of specified 5.00 One Cum
grade excluding the cost of centring and shuttering. All work
upto plinth level. 1:4:8 (1 cement 4 fine sand 8 graded stone
aggregate 40 mm nominal size).
8 Providing and laying reinforced cement concrete in retaining 5.00 One Cum
walls, return walls, walls (any thickness) including attached
pilasters, beams, slabs, columns, piers, abutments, pillars,
posts, struts, buttresses, string or lacing courses, parapets,
coping, bed blocks, anchor blocks, plain window sills, fillets etc
upto floor five level, excluding the cost of centring, shuttering
and finishing. 1:2:4 (1 cement 2 coarse sand 4 graded stone
aggregate 20 mm nominal size).
9 Ellis pattern flooring 20mm thick cement concrete using one 400.00 One Sqm
cement and three granite stone metal chippings of 3 to 10mm
guage including fine finishing, neat thread lining, curing, cost
of all materials etc. complete.
10 Plastering in C.M 1:4, 20 mm thick including curing, cost of all 100.00 One Sqm
materials etc complete all as directed by Engineer-in-charge.
(1 cement 4 fine sand)
11 Plastering in C.M 1:6, 20 mm thick including curing, cost of 100.00 One Sqm
all materials etc complete all as directed by Engineer-in-charge
(1 cement 6 fine sand)
12 Plastering in C.M 1:4, 12mm thick including curing, cost of 100.00 One Sqm
all materials etc complete all as directed by Engineer-in-charge
(1 cement 4 fine sand)
13 Plastering in C.M 1:6, 12mm thick including curing, cost of all 100.00 One Sqm
materials etc complete all as directed by Engineer-in-charge (1
cement 6 fine sand)
14 Flooring with rough shahabad stone slabs of 20 to 30 mm thick 20.00 One Sqm
and approved quality over a base of cement mortar 1:6 and
pointing with CM 1:3 including curing, cost of all materials etc.
complete.
15 Flooring / dadoing with polished shahabad stone slabs of 20.00 One Sqm
25mm thick (Tandur blue) uniform shade and approved
quality, over a base of cement mortar 1:6 and pointing CM 1:2
including curing, cost of all materials etc.complete.
16 Removing the existing cement tiled flooring and redoing the 400.00 One Sqm
same with Ellis pattern flooring 20mm thick cement concrete
using one cement and three granite stone chippings of 3 to 10
mm gauge including fine finishing, neat thread lining, curing,
disposing off the spoils within a lead of 2 km etc. complete as
directed by the Engineer- in-charge.
17 Removing the existing cement / mosaic flooring and supply 75.00 One Sqm
and fixing of coloured ceramic tiles of Kajaria / Johnson or
other approved make equivalent in all respects ceramic tiles of
commercial grade and of size 400 x 400 mm of approved shade
and design for flooring and 300 x 200 mm for walls over a base
of CM 1:4 including neat finishing and jointing with colour
cement etc, complete. The rate shall include removing the
existing floor and disposing of the debris to specified areas
within a lead of 2 km (corners are to be jointed by metering the
tiles).
18 Brick work with FPS bricks of class designation 75 in cement 10.00 One Cum
mortar 1:6 (1 cement : 6 coarse sand) including curing, cost of
all materials etc., complete.
19 Coursed rubble stone masonry 2nd sort in CM 1:6 including 10.00 One Cum
curring cost of all materials etc complete all as directed by
Engineer-in-charge.
20 Polishing to the existing mosaic / polished shahbad stone 50.00 One Sqm
flooring using necessary materials such as carborandam stone
etc including neat finishing etc complete as directed
21 Reinforced brick work 12cm thick in CM 1:4 including 30.00 One Sqm
placing of steel at every 4th coures including curing, cost of all
materials except steel and it's fabrication, which will be paid
separately.
22 Removing the existing mosaic tiles flooring/dado and fixing of 75.00 One Sqm
coloured glazed vetrified tiles of 600 x 600 mm x 8 mm
thickness normal colour first quality for walls and floor,
"Naveen / Asian or other approved brand" make vetrified tiles
for both walls and floor over a base of C.M 1:4, 20 mm thick
neat finishing including level and jointing with colour cement
etc complete as directed by Engineer-in-charge.
23 Labour charges for laying of polished vetrified tiles of size 600 100.00 One Sqm
x 600 mm for flooring over a base of cement motor including
curing etc. complete only labour charges all the required
material will be arranged by the dept. or will be paid in other
item.
24 Labour charges for laying of polished vertified tiles 7.5 mm 25.00 One Rmt
thick or more for skirting / dado to a hight of 100 mm /150
mm over a base of cement motor including curing etc complete
all the materials will be arranged by the dept. / will be paid in
other item
25 Supply & laying of white marble stone over 0.2 upto 0.5 Sq.M 10.00 One Sqm
slabs of Macarana variety, 18 mm thick of approved quality,
shade and size including transportation, careful loading.
Unloading, polishing cost of all materials incidentals etc.
complete as directed by the Engineer-in-charge.
26 Providing nosing to staircase treads of steps with marble slabs 20.00 One Rmt
including finishing the edges neatly to required shape and line,
all necessary tools and equipment etc., complete as directed by
the Engineer-in-charge.
27 Removing the exiting cement flooring, supply and laying of light 25.00 One Sqm
duty decorative cement paver tiles (light traffic) in multi
colours of 22 mm thickness of approved colour and design,
with cement slurry mixed with pigment to match the shade of
tiles including rubbing and cleaning etc., complete on 20mm
thick cement mortar 1:4 etc., as directed by Engineer-in-
charge.
2 Dismantling tile work in floor and roofs laid in cement mortar 75.00 One Sqm
including stacking material within 50 meters lead. For
thickness of tiles 10 mm to 25 mm.
4 Filling available excavated earth (excluding rock) in trenches, 15.00 One Cum
plinth, sides of foundations etc. in layers not exceeding 20 cm
in depth, consolidating each deposited layer by ramming and
watering, lead up to 50 m and lift up to 1.5 m etc complete.
5 Conveyance of murram and filling and consolidation of muram 15.00 One Cum
in foundations and basement including cost and conveyance to
site within a lead of 3 km etc complete as directed by Enginer-
in-charge.
6 Providing and laying in position cement concrete of specified 40.00 One Cum
grade excluding the cost of centring and shuttering. All work
upto plinth level. 1:5:10 (1 cement 5 fine sand 10 graded stone
aggregate 40 mm nominal size).
7 Providing and laying in position cement concrete of specified 5.00 One Cum
grade excluding the cost of centring and shuttering. All work
upto plinth level. 1:4:8 (1 cement 4 fine sand 8 graded stone
aggregate 40 mm nominal size).
8 Providing and laying reinforced cement concrete in retaining 5.00 One Cum
walls, return walls, walls (any thickness) including attached
pilasters, beams, slabs, columns, piers, abutments, pillars,
posts, struts, buttresses, string or lacing courses, parapets,
coping, bed blocks, anchor blocks, plain window sills, fillets etc
upto floor five level, excluding the cost of centring, shuttering
and finishing. 1:2:4 (1 cement 2 coarse sand 4 graded stone
aggregate 20 mm nominal size).
9 Ellis pattern flooring 20mm thick cement concrete using one 400.00 One Sqm
cement and three granite stone metal chippings of 3 to 10mm
guage including fine finishing, neat thread lining, curing, cost
of all materials etc. complete.
10 Plastering in C.M 1:4, 20 mm thick including curing, cost of all 100.00 One Sqm
materials etc complete all as directed by Engineer-in-charge.
(1 cement 4 fine sand)
11 Plastering in C.M 1:6, 20 mm thick including curing, cost of 100.00 One Sqm
all materials etc complete all as directed by Engineer-in-charge
(1 cement 6 fine sand)
12 Plastering in C.M 1:4, 12mm thick including curing, cost of 100.00 One Sqm
all materials etc complete all as directed by Engineer-in-charge
(1 cement 4 fine sand)
13 Plastering in C.M 1:6, 12mm thick including curing, cost of all 100.00 One Sqm
materials etc complete all as directed by Engineer-in-charge (1
cement 6 fine sand)
14 Flooring with rough shahabad stone slabs of 20 to 30 mm thick 20.00 One Sqm
and approved quality over a base of cement mortar 1:6 and
pointing with CM 1:3 including curing, cost of all materials etc.
complete.
15 Flooring / dadoing with polished shahabad stone slabs of 20.00 One Sqm
25mm thick (Tandur blue) uniform shade and approved
quality, over a base of cement mortar 1:6 and pointing CM 1:2
including curing, cost of all materials etc.complete.
16 Removing the existing cement tiled flooring and redoing the 400.00 One Sqm
same with Ellis pattern flooring 20mm thick cement concrete
using one cement and three granite stone chippings of 3 to 10
mm gauge including fine finishing, neat thread lining, curing,
disposing off the spoils within a lead of 2 km etc. complete as
directed by the Engineer- in-charge.
17 Removing the existing cement / mosaic flooring and supply 75.00 One Sqm
and fixing of coloured ceramic tiles of Kajaria / Johnson or
other approved make equivalent in all respects ceramic tiles of
commercial grade and of size 400 x 400 mm of approved shade
and design for flooring and 300 x 200 mm for walls over a base
of CM 1:4 including neat finishing and jointing with colour
cement etc, complete. The rate shall include removing the
existing floor and disposing of the debris to specified areas
within a lead of 2 km (corners are to be jointed by metering the
tiles).
18 Brick work with FPS bricks of class designation 75 in cement 10.00 One Cum
mortar 1:6 (1 cement : 6 coarse sand) including curing, cost of
all materials etc., complete.
19 Coursed rubble stone masonry 2nd sort in CM 1:6 including 10.00 One Cum
curring cost of all materials etc complete all as directed by
Engineer-in-charge.
20 Polishing to the existing mosaic / polished shahbad stone 50.00 One Sqm
flooring using necessary materials such as carborandam stone
etc including neat finishing etc complete as directed
21 Reinforced brick work 12cm thick in CM 1:4 including 30.00 One Sqm
placing of steel at every 4th coures including curing, cost of all
materials except steel and it's fabrication, which will be paid
separately.
22 Removing the existing mosaic tiles flooring/dado and fixing of 75.00 One Sqm
coloured glazed vetrified tiles of 600 x 600 mm x 8 mm
thickness normal colour first quality for walls and floor,
"Naveen / Asian or other approved brand" make vetrified tiles
for both walls and floor over a base of C.M 1:4, 20 mm thick
neat finishing including level and jointing with colour cement
etc complete as directed by Engineer-in-charge.
23 Labour charges for laying of polished vetrified tiles of size 600 100.00 One Sqm
x 600 mm for flooring over a base of cement motor including
curing etc. complete only labour charges all the required
material will be arranged by the dept. or will be paid in other
item.
24 Labour charges for laying of polished vertified tiles 7.5 mm 25.00 One Rmt
thick or more for skirting / dado to a hight of 100 mm /150
mm over a base of cement motor including curing etc complete
all the materials will be arranged by the dept. / will be paid in
other item
25 Supply & laying of white marble stone over 0.2 upto 0.5 Sq.M 10.00 One Sqm
slabs of Macarana variety, 18 mm thick of approved quality,
shade and size including transportation, careful loading.
Unloading, polishing cost of all materials incidentals etc.
complete as directed by the Engineer-in-charge.
26 Providing nosing to staircase treads of steps with marble slabs 20.00 One Rmt
including finishing the edges neatly to required shape and line,
all necessary tools and equipment etc., complete as directed by
the Engineer-in-charge.
27 Removing the exiting cement flooring, supply and laying of light 25.00 One Sqm
duty decorative cement paver tiles (light traffic) in multi
colours of 22 mm thickness of approved colour and design,
with cement slurry mixed with pigment to match the shade of
tiles including rubbing and cleaning etc., complete on 20mm
thick cement mortar 1:4 etc., as directed by Engineer-in-
charge.
2 Supplying and fixing of commercial type single leaf / double 100.00 One Sqm
leaf flush shutters 30 mm thick including cost and fixing of
M.S. fixtures, fittings and furniture of superior quality etc.,
complete, all as directed by the Engineer-in-charge.
3 Providing 2nd class teak wood work in frames of doors, 0.50 One Cum
windows, clearestory windows and other frames, wrought
fromed and fixed in position etc complete all as directed by
Engineer-in-charge.
4 Supplying and fixing of plain glass panes/pin headed/ground 15.00 One Sqm
glass panes frosted of 4 mm thick of required sizes with proper
wooden beedings/glass putty required for fixing to the existing
steel/wooden windows including removing the existing broken
glass panes along with the beeding/glass putty, cost of all
materials and labour etc., complete all as directed.
5 Supplying and fixing of 5 mm thick plain glass of required sizes 10.00 One Sqm
to cup boards, table tops etc., with necessary grinding, beeding
including cost of all materials such as screws, wheels etc.,
complete as directed.
6 Supplying and fixing of medium Indian teakwood window 20.00 One Sqm
shutters 30 mm thick fully glazed with 3 mm thick glass of
approved quality including cost and fixing of MS fixtures,
fittings and furniture of superior quality etc., complete as
directed by the Engineer-in-charge.
7 Supplying and fixing of medium Indian teak wood window 30.00 One Sqm
shutters 30 mm thick fully panelled including fixing of M.S.
fixtures, fittings and furniture of superior quality etc., complete
as directed by the Engineer-in-charge.
8 Supplying and fixing of medium Indian teak wood window 10.00 One Sqm
shutters 30 mm thick partly panelled and partly glazed with 3
mm thick glass of approved quality including cost and fixing of
MS fixtures, fittings and furniture of superior quality etc.,
complete as directed by the Engineer-in-charge.
9 Supply and fixing well seasoned medium Indian teak wood 15.00 One Sqm
window / ventilator frames made out of scantling of size 75x75
mm including fixing of M.S hold fasts 16 mm dia MS rounds
spaced at not more than 10.5cm centre to centre, cost of all
materials etc., complete as directed by the Engineer-in-charge.
(This includes dismantling the existing frames, brick work,
P.C.C etc., and making good to a neat finish etc., complete
wherever necessary disposal of debris all as directed).
10 Supply and fixing well seasoned medium Indian teak wood 10.00 One Sqm
ventilator shutter 30 mm thick fully glazed top/side hung type,
glazing with 3mm thick glass of approved quality including cost
and fixing of M.S. fixtures of superior quality, all as directed.
11 Supplying and fixing weldmesh door partly panelled and partly 10.00 One Sqm
weldmesh double leaf shutters 30mm thick using medium
Indian teakwood and weldmesh of size 75x25 mm, 10x8 guage
including supplying and fixing of M.S. fixtures, fittings and
furniture of superior quality etc., complete as directed by the
Engineer-in-charge.
12 Supply and fixing weldmesh door double leaf shutter 30 mm 10.00 One Sqm
thick using best Indian teakwood and weldmesh of size
75x25mm, 10x8 guage including supplying and fixing of MS
fixtures, fittings and furniture of superior quality etc., complete
as directed by Engineer-in-charge.
13 Supplying and fixing of weldmesh of size 75x25mm, 10x8 20.00 One Sqm
guage with 75x25mm seasoned medium Indian teakwood
reapers to the existing windows including 2 coats of painting
with synthetic enamel paint of approved shade and brand over
a coat of primer, making holes wherever necessary for
operating the fixtures, furniture, cost of all materials etc.,
complete.
14 Supplying and fixing of M.S. flymesh of an approved quality to 20.00 One Sqm
the existing door and window shutters with necessary wooden
beeding wherever necessary, including removing the existing
flymesh, cost of all materials etc., complete.
15 Supplying and fixing of medium Indian teak wood door 10.00 One Sqm
shutters 30 mm thick partly panelled and partly flymesh of
approved quality including cost and fixing of M.S. fixtures,
fittings and furniture of superior quality etc., complete.
16 Supplying and fixing of medium Indian teak wood door 10.00 One Sqm
shutters 30 mm thick with fully flymesh of approved quality
including cost and fixing of M.S. fixtures, fittings and furniture
of superior quality etc., complete.
17 Supplying and fixing of best approved quality aluminium 50.00 One Sqm
sheeting 24 guage to the faces and edge of door shutters
including fixing with best quality GI screws and cup washers,
cost of all materials etc., complete as directed by the Engineer-
in-charge. (Measurement shall be made for one side of door
only).
18 Supplying of medium Indian teak wood planks of 19 mm thick 15.00 One Sqm
in various sizes as directed upto a length of 2.40 M.
19 Supplying and fixing of seasoned medium Indian teakwood 100.00 One Rmt
reapers of size 50 x25 mm horizontally on the wall surface by
providing wooden pegs and fixing with MS screws etc.,
complete.
20 Supplying and fixing in position medium Indian teakwood 35.00 One Sqm
cupboard shutters having frame of size 75 x 25 mm scantling
and fixing 3 mm thick plywood sheets on both sides including
cost of MS hinges, Nickle coated latches and oxidised
aluminium fixtures and furniture of approved quality etc.,
complete as directed by the Engineer-in-charge.
21 Supply and fxing commercial Plywood sheets 4 mm thick 20.00 One Sqm
plain lining with necessary screws, priming coat on exposed
surface etc complete all as directed by Engineer-in-charge.
22 Repairs to the existing doors, windows, ventilators and cup 40.00 One Sqm
boards including frame, shutters, fittings, weldmesh, T.W
beadings etc., all as directed by the Engineer-in-charge. (Only
labour charges).
23 Conveying from the stores of wooden / PVC - single / double 200.00 One Sqm
leaf door shutters and fixing in position at places as directed
with out fittings etc (Labour charges only)
24 Supplying and fixing laminated sheet of thickness not less than 10.00 One Sqm
1 mm of required design, brand, quality and size all as directed
by the Engineer-in-charge.
25 Supplying and fixing M.S aldrop powder coated of 16 mm dia 50.00 Each
300 mm long heavy type with plate folded hooks required nuts
and bolts as directed by the Engineer-in-charge.
26 Supplying and fixing M.S aldrop powder coated of 12 mm dia 30.00 Each
200 mm long heavy type with required nuts and bolts as
directed by the Engineer-in-charge.
27 Providing and fixing anodised aluminium work for doors, 50.00 One Kg
windows, ventilators and partitions with extruded built up
standard tubular and other sections of approved make
conforming to IS : 733 and IS : 1285, anodised transparent or
dyed to required shade according to IS : 1868. (Minimum
anodic coating of grade AC 15), fixed with rawl plugs and
screws or with fixing clips, or with expansion hold fasteners
including necessary filling up of gaps at junctions, at top,
bottom and sides with required PVC / Neoprene felt etc.,
Aluminium sections shall be smooth, rust free, straight, mitred
and joined mechanicaly wherever required including cleat
angle. Aluminium snap beading for glazing / panelling, C.P.
brass / stainless steel screws, all complete as per architectural
drawings and the directions of Engineer-in-charge (glazing and
panelling to be paid for separately). for all types of works.
29 Supplying and fixing of PVC netlon mesh of approved colour to 125.00 One Sqm
the existing window mesh shutters with male and female
posting arragements and removing of existing old flymesh etc.
complete as directed by the Engineer-in-charge.
30 Supply and fixing of 100mm vertical blinds including imported 4.00 One Sqm
spare parts and Indian fabric including cost of materials,
fixtures and fittings etc., complete as directed by the Engineer-
in-charge.
2 Supplying and fixing of commercial type single leaf / double 100.00 One Sqm
leaf flush shutters 30 mm thick including cost and fixing of
M.S. fixtures, fittings and furniture of superior quality etc.,
complete, all as directed by the Engineer-in-charge.
3 Providing 2nd class teak wood work in frames of doors, 0.50 One Cum
windows, clearestory windows and other frames, wrought
fromed and fixed in position etc complete all as directed by
Engineer-in-charge.
4 Supplying and fixing of plain glass panes/pin headed/ground 15.00 One Sqm
glass panes frosted of 4 mm thick of required sizes with proper
wooden beedings/glass putty required for fixing to the existing
steel/wooden windows including removing the existing broken
glass panes along with the beeding/glass putty, cost of all
materials and labour etc., complete all as directed.
5 Supplying and fixing of 5 mm thick plain glass of required sizes 10.00 One Sqm
to cup boards, table tops etc., with necessary grinding, beeding
including cost of all materials such as screws, wheels etc.,
complete as directed.
6 Supplying and fixing of medium Indian teakwood window 20.00 One Sqm
shutters 30 mm thick fully glazed with 3 mm thick glass of
approved quality including cost and fixing of MS fixtures,
fittings and furniture of superior quality etc., complete as
directed by the Engineer-in-charge.
7 Supplying and fixing of medium Indian teak wood window 30.00 One Sqm
shutters 30 mm thick fully panelled including fixing of M.S.
fixtures, fittings and furniture of superior quality etc., complete
as directed by the Engineer-in-charge.
8 Supplying and fixing of medium Indian teak wood window 10.00 One Sqm
shutters 30 mm thick partly panelled and partly glazed with 3
mm thick glass of approved quality including cost and fixing of
MS fixtures, fittings and furniture of superior quality etc.,
complete as directed by the Engineer-in-charge.
9 Supply and fixing well seasoned medium Indian teak wood 15.00 One Sqm
window / ventilator frames made out of scantling of size 75x75
mm including fixing of M.S hold fasts 16 mm dia MS rounds
spaced at not more than 10.5cm centre to centre, cost of all
materials etc., complete as directed by the Engineer-in-charge.
(This includes dismantling the existing frames, brick work,
P.C.C etc., and making good to a neat finish etc., complete
wherever necessary disposal of debris all as directed).
10 Supply and fixing well seasoned medium Indian teak wood 10.00 One Sqm
ventilator shutter 30 mm thick fully glazed top/side hung type,
glazing with 3mm thick glass of approved quality including cost
and fixing of M.S. fixtures of superior quality, all as directed.
11 Supplying and fixing weldmesh door partly panelled and partly 10.00 One Sqm
weldmesh double leaf shutters 30mm thick using medium
Indian teakwood and weldmesh of size 75x25 mm, 10x8 guage
including supplying and fixing of M.S. fixtures, fittings and
furniture of superior quality etc., complete as directed by the
Engineer-in-charge.
12 Supply and fixing weldmesh door double leaf shutter 30 mm 10.00 One Sqm
thick using best Indian teakwood and weldmesh of size
75x25mm, 10x8 guage including supplying and fixing of MS
fixtures, fittings and furniture of superior quality etc., complete
as directed by Engineer-in-charge.
13 Supplying and fixing of weldmesh of size 75x25mm, 10x8 20.00 One Sqm
guage with 75x25mm seasoned medium Indian teakwood
reapers to the existing windows including 2 coats of painting
with synthetic enamel paint of approved shade and brand over
a coat of primer, making holes wherever necessary for
operating the fixtures, furniture, cost of all materials etc.,
complete.
14 Supplying and fixing of M.S. flymesh of an approved quality to 20.00 One Sqm
the existing door and window shutters with necessary wooden
beeding wherever necessary, including removing the existing
flymesh, cost of all materials etc., complete.
15 Supplying and fixing of medium Indian teak wood door 10.00 One Sqm
shutters 30 mm thick partly panelled and partly flymesh of
approved quality including cost and fixing of M.S. fixtures,
fittings and furniture of superior quality etc., complete.
16 Supplying and fixing of medium Indian teak wood door 10.00 One Sqm
shutters 30 mm thick with fully flymesh of approved quality
including cost and fixing of M.S. fixtures, fittings and furniture
of superior quality etc., complete.
17 Supplying and fixing of best approved quality aluminium 50.00 One Sqm
sheeting 24 guage to the faces and edge of door shutters
including fixing with best quality GI screws and cup washers,
cost of all materials etc., complete as directed by the Engineer-
in-charge. (Measurement shall be made for one side of door
only).
18 Supplying of medium Indian teak wood planks of 19 mm thick 15.00 One Sqm
in various sizes as directed upto a length of 2.40 M.
19 Supplying and fixing of seasoned medium Indian teakwood 100.00 One Rmt
reapers of size 50 x25 mm horizontally on the wall surface by
providing wooden pegs and fixing with MS screws etc.,
complete.
20 Supplying and fixing in position medium Indian teakwood 35.00 One Sqm
cupboard shutters having frame of size 75 x 25 mm scantling
and fixing 3 mm thick plywood sheets on both sides including
cost of MS hinges, Nickle coated latches and oxidised
aluminium fixtures and furniture of approved quality etc.,
complete as directed by the Engineer-in-charge.
21 Supply and fxing commercial Plywood sheets 4 mm thick 20.00 One Sqm
plain lining with necessary screws, priming coat on exposed
surface etc complete all as directed by Engineer-in-charge.
22 Repairs to the existing doors, windows, ventilators and cup 40.00 One Sqm
boards including frame, shutters, fittings, weldmesh, T.W
beadings etc., all as directed by the Engineer-in-charge. (Only
labour charges).
23 Conveying from the stores of wooden / PVC - single / double 200.00 One Sqm
leaf door shutters and fixing in position at places as directed
with out fittings etc (Labour charges only)
24 Supplying and fixing laminated sheet of thickness not less than 10.00 One Sqm
1 mm of required design, brand, quality and size all as directed
by the Engineer-in-charge.
25 Supplying and fixing M.S aldrop powder coated of 16 mm dia 50.00 Each
300 mm long heavy type with plate folded hooks required nuts
and bolts as directed by the Engineer-in-charge.
26 Supplying and fixing M.S aldrop powder coated of 12 mm dia 30.00 Each
200 mm long heavy type with required nuts and bolts as
directed by the Engineer-in-charge.
27 Providing and fixing anodised aluminium work for doors, 50.00 One Kg
windows, ventilators and partitions with extruded built up
standard tubular and other sections of approved make
conforming to IS : 733 and IS : 1285, anodised transparent or
dyed to required shade according to IS : 1868. (Minimum
anodic coating of grade AC 15), fixed with rawl plugs and
screws or with fixing clips, or with expansion hold fasteners
including necessary filling up of gaps at junctions, at top,
bottom and sides with required PVC / Neoprene felt etc.,
Aluminium sections shall be smooth, rust free, straight, mitred
and joined mechanicaly wherever required including cleat
angle. Aluminium snap beading for glazing / panelling, C.P.
brass / stainless steel screws, all complete as per architectural
drawings and the directions of Engineer-in-charge (glazing and
panelling to be paid for separately). for all types of works.
29 Supplying and fixing of PVC netlon mesh of approved colour to 125.00 One Sqm
the existing window mesh shutters with male and female
posting arragements and removing of existing old flymesh etc.
complete as directed by the Engineer-in-charge.
30 Supply and fixing of 100mm vertical blinds including imported 4.00 One Sqm
spare parts and Indian fabric including cost of materials,
fixtures and fittings etc., complete as directed by the Engineer-
in-charge.
2 Applying two or more coats on old / new surfaces of white 4000.00 One Sqm
wash to walls and ceiling including scraping the old surface,
wherever necessary, cost of all materials etc., complete.
3 Applying one coat of colour wash of approved colour to walls 3000.00 One Sqm
including scraping the old surface, wherever necessary, cost of
all materials etc., complete.
4 Applying two coats of colour wash of approved colour to walls 1000.00 One Sqm
including scraping the old surface, wherever necessary, cost of
all materials etc., complete.
5 Applying one coat of oil bound distemper of approved shade 8000.00 One Sqm
and brand to walls and ceiling including scraping the old
surface cost of all materials etc., complete (Asian Brand /
Tractor).
6 Applying two coats of oil bound distemper of approved shade 8000.00 One Sqm
and brand to walls and ceiling including scraping the old
surface cost of all materials etc., complete (Asian
Brand/Tractor).
7 Applying one coat of synthetic enamel paint of approved brand 3000.00 One Sqm
and shade to old plastered surfaces, including scraping, cost of
all materials etc., complete.
8 Applying two coats of synthetic enamel paint of approved brand 1000.00 One Sqm
and shade to old plastered surfaces, including scraping, cost of
all materials etc., complete.
9 Applying one coat of synthetic enamel paint of approved shade 1000.00 One Sqm
and brand to old wood work including scraping, cost of all
materials etc., complete.
10 Applying two coats of synthetic enamel paint of approved shade 4000.00 One Sqm
and brand to old wood work including scraping, cost of all
materials etc., complete.
11 Painting to black boards with one coat of black board paint of 50.00 One Sqm
approved brand including cost of all materials etc., complete.
12 Applying one coat of synthetic enamel paint of approved shade 450.00 One Sqm
and brand to old iron work including scraping, cost of all
materials etc., complete.
13 Applying two coats of synthetic enamel paint of approved shade 250.00 One Sqm
and brand to old iron work including scraping, cost of all
materials etc., complete.
14 Finishing walls with water proofing cement paint of snowcem 2500.00 One Sqm
plus brand and of required colour to give an even shade to old
plastered surfaces one coat including minor scraping wherever
necessary, curing cost of all materials etc., complete.
15 Finishing walls with water proofing cement paint of snowcem 1000.00 One Sqm
plus brand and of required colour to give an even shade to old
plastered surfaces two coats including minor scraping wherever
necessary, curing cost of all materials etc., complete.
16 Thorough scraping, sand papering and preparing the surface 2000.00 One Sqm
smooth including necessary repairs to scratches etc., complete.
17 Finishing walls with acrylic smooth exterior paint "Trump" of 300.00 One Sqm
M/s.snowcem India limited on old work two or more coats
applied at 1.67 litres per 10 sqm on existing snowcem paint
surface etc., complete. (Scrapping will be paid separately).
18 Finishing walls with acrylic smooth exterior paint "Trump" of 250.00 One Sqm
M/s.snowcem India limited on old work one or more coats
applied at 0.9 litres per 10 sqm on existing snowcem paint
surface etc., complete.
19 Thorough cleaning of the existing Oil bound distemper paint 200.00 One Sqm
with water/scrappers or any other suitable tools and applying
one coat of altek water based cement primer & two coats of
altek harmony (Acrylic Emulsion Paint extra grade) etc
complete as directed by the Engineer-in-charge.
20 Removal of all nails, screws, wooden plugs etc from the walls, 100.00 Each quarter
chipping the plastering of small holes caused by removal,
cleaning and finishing good the same with cement mortar etc
complete in quarters of all types as directed by Engineer-in-
charge.
2 Applying two or more coats on old / new surfaces of white 4000.00 One Sqm
wash to walls and ceiling including scraping the old surface,
wherever necessary, cost of all materials etc., complete.
3 Applying one coat of colour wash of approved colour to walls 3000.00 One Sqm
including scraping the old surface, wherever necessary, cost of
all materials etc., complete.
4 Applying two coats of colour wash of approved colour to walls 1000.00 One Sqm
including scraping the old surface, wherever necessary, cost of
all materials etc., complete.
5 Applying one coat of oil bound distemper of approved shade 8000.00 One Sqm
and brand to walls and ceiling including scraping the old
surface cost of all materials etc., complete (Asian Brand /
Tractor).
6 Applying two coats of oil bound distemper of approved shade 8000.00 One Sqm
and brand to walls and ceiling including scraping the old
surface cost of all materials etc., complete (Asian
Brand/Tractor).
7 Applying one coat of synthetic enamel paint of approved brand 3000.00 One Sqm
and shade to old plastered surfaces, including scraping, cost of
all materials etc., complete.
8 Applying two coats of synthetic enamel paint of approved brand 1000.00 One Sqm
and shade to old plastered surfaces, including scraping, cost of
all materials etc., complete.
9 Applying one coat of synthetic enamel paint of approved shade 1000.00 One Sqm
and brand to old wood work including scraping, cost of all
materials etc., complete.
10 Applying two coats of synthetic enamel paint of approved shade 4000.00 One Sqm
and brand to old wood work including scraping, cost of all
materials etc., complete.
11 Painting to black boards with one coat of black board paint of 50.00 One Sqm
approved brand including cost of all materials etc., complete.
12 Applying one coat of synthetic enamel paint of approved shade 450.00 One Sqm
and brand to old iron work including scraping, cost of all
materials etc., complete.
13 Applying two coats of synthetic enamel paint of approved shade 250.00 One Sqm
and brand to old iron work including scraping, cost of all
materials etc., complete.
14 Finishing walls with water proofing cement paint of snowcem 2500.00 One Sqm
plus brand and of required colour to give an even shade to old
plastered surfaces one coat including minor scraping wherever
necessary, curing cost of all materials etc., complete.
15 Finishing walls with water proofing cement paint of snowcem 1000.00 One Sqm
plus brand and of required colour to give an even shade to old
plastered surfaces two coats including minor scraping wherever
necessary, curing cost of all materials etc., complete.
16 Thorough scraping, sand papering and preparing the surface 2000.00 One Sqm
smooth including necessary repairs to scratches etc., complete.
17 Finishing walls with acrylic smooth exterior paint "Trump" of 300.00 One Sqm
M/s.snowcem India limited on old work two or more coats
applied at 1.67 litres per 10 sqm on existing snowcem paint
surface etc., complete. (Scrapping will be paid separately).
18 Finishing walls with acrylic smooth exterior paint "Trump" of 250.00 One Sqm
M/s.snowcem India limited on old work one or more coats
applied at 0.9 litres per 10 sqm on existing snowcem paint
surface etc., complete.
19 Thorough cleaning of the existing Oil bound distemper paint 200.00 One Sqm
with water/scrappers or any other suitable tools and applying
one coat of altek water based cement primer & two coats of
altek harmony (Acrylic Emulsion Paint extra grade) etc
complete as directed by the Engineer-in-charge.
20 Removal of all nails, screws, wooden plugs etc from the walls, 100.00 Each quarter
chipping the plastering of small holes caused by removal,
cleaning and finishing good the same with cement mortar etc
complete in quarters of all types as directed by Engineer-in-
charge.
1 Providing and fixing APP (Atactic Polypropylene Polymer) 1800.00 One Sqm
modified prefabricated five layer 2 mm thick water proofing
membrance, black finished reinforced with glass fibre matt
consisting of a coat of bitumen primer for bitumen membrane
@ 0.40 ltr/sq. mtr by the same membrance manufacture of
density at 25ºC, 0.87 - 0.89 kg/ltr and viscocity 70 - 160 cps.
Over the primer coat the layer of membrane shall be laid using
Butane torch and sealing all joints etc., and preparing the
surface complete. The vital physical and chemical parameters
of the membrance shall be joint strength in longitudinal and
transverse direction at 23ºC as 350 / 300 N / 5 cm. Tear
strength in longitudinal and transverse direction as 60 / 80 N.
Softening point of membrane not less than 150ºC. Cold
flexibility shall be upto - 2ºC when tested in accordance with
ASTM, D - 5147. The laying of membrane shall be got done
through the authorised applicator of the manufacture of
membrane over the 1st floor roof buildings.
2 Providing water proofing treatment with latex modified polymer 200.00 One Sqm
based water proofing chemical mixed with cement for roof and
side walls including cleaning the surface from any loose
particles, filling all visible cracks with KEM-PWC (i.e Latex
modified polymer based water proofing chemicials mixed with
cement in 1:1½ proportion).
3 Applying brush bond of Phos Rock on surface of walls including 100.00 One Sqm
thorough cleaning of painted portion. The materials may be
fixed machanically as per the manufacture specifications.
4 Supplying and fixing of plain G.I sheet of 20 guage over the 20.00 One Sqm
slab joints on the concrete / brick masonry fixed with wooden
gutties and necessary washers with screws inside the concrete
excluding the cost of concrete / brick masonry which will be
paid separtely)
Open all major cracks - joints as 'V' shape groove along with
m/c.
1 Cleaning all surfaces with wire brush and water.
2 Providing and applying one coat of SUPERCREATE (704) +
cement.
3 Filling all cracks/joints with CRACK FILLET 721 + 50 %
Supercreate (704) + water (major cracks / joints only).
2 Crack filling without pressure grouting: Routing out the cracks 200.00 One Rmt
with a mechanically operated groove cutter and sealing with
expansive crack filling compound - CERA POLY CRACKFILLER
or equivalent and tooling to finish neatly. Providing two top
coats of CERAFLEX , single component highly flexible
membrane coating (for a width of 10 cms with the crack at the
center) or equivalent as per manufacturer's recommendation
and curing adequately. Rate quoted includes cost of material,
labour charges, conveyance, tools and all other incidental
charges etc complete all as directed by Engineer-in-charge.
2 Supply and stacking of machine crushed graded stone 60.00 One Cum
aggregate at site of size 65mm hard granite stone metal
including all incidental charges etc complete as directed by
Engineer-in-charge. (1/13 qty will be deducted for voids).
3 Supply and stacking of machine crushed graded stone 60.00 One Cum
aggregate at site of size 40mm hard granite stone metal
including all incidental charges etc complete as directed by
Engineer-in-charge. (1/13 qty will be deducted for voids)
4 Carrying of gravel including loading / unloading within a lead 100.00 One Cum
of 3 kms excavating the available murram within the premises
of BHEL cost of materials, labour, conveyance to site and
stacking as directed by Engineer-in-charge. (1/7 th qty will be
deducted for voids).
5 Filling big pot holes and ruts before laying B.T carpet with 25 90.00 One Cum
to 40 mm IRC guage hard granite metal premixed with 56.07
kgs of bitumen per / cum of metal using a tack coat of 9.76
kgs of bitumen per 10 sqm of road surface, including rolling
with power roller for an average depth of 7.5 cm including all
incidentals and operation charges etc complete.
6 Picking old metalled surface to a depth of 40 to 100 mm and 100.00 One Sqm
spreading metal including watering with an initial lead of 2
Hectometres and rolling with power rollers watering and
spreading gravel 1 at 33.33 % of metal for blindage and power
roller rolling including hire changes of power roller (8 to 10 T)
barricading and diversion of traffic and wetting the new
consolidation for a fortnight (for compacted thickness of) 100
mm thickness.
8 Carrying from stacks and spreading metal (for 75 mm thick) 400.00 One Sqm
including spreading gravel @ 33 1/3% for blindage, watering,
rolling at various stages with power roller of 10 T capacity,
diversion of traffic, watering the new consolidation for a
fortnight etc complete.
9 Carrying the gravel from the stacks to the areas of filling, 75.00 One Cum
spreading in layers of 150 mm thick watering, ramming and
consolidation with power roller so as to bring the surface to
proper line, level camber and grade etc complete as directed by
Engineer-in-charge.
10 Providing and laying premix bituminous macadam base course 30.00 One Cum
with stone aggregate of quality size and grading as specified in
CPWD specification and straight run bitumen of grade 80/100
@ 4% by weight of total mix including hot mixing of stone
aggregate and bitumen in hot mix plant, transporting mixed
material and laying mixed material with paver finisher to the
required level and grade, rolling with road roller of 8 to 10
tonne capacity to achieve the required compaction and density
of any thickness.
11 2.5cm premix carpet surfacing with 2.25 cu.m and 1.12cu.m of 3000.00 One Sqm
stone chippings of 13.2mm and 11.2mm size respectively per
100 sq.m and 52 kg and 56kg of hot bitumen per cu.m of stone
chippings of 13.2mm and 11.2mm size respectively including a
tack coat with hot straight run bitumen including consolidtion
with road roller of 6 to 9 tonne capacity etc complete (tack coat
to be paid for separately) with paving Asphalt 80/100 heated
and then mixed with solvent at the rate of 70 grams per kg of
asphalt.
12 Providing and applying tack coat using bitumen emulsion 3000.00 One Sqm
(Rapid Setting) complying with IS 8887-1995, spraying the
bitumen emulsion with mechanically operated spray unit,
cleaning and preparing the existing road surface as per
specifications. On bituminous surface @ 0.25 kg/sqm.
13 Providing and laying seal coat over prepared surface of road 3000.00 One Sqm
with bitumen heated in bitumen boiler fitted with the spray set
spraying using 98 kg of bitumen of grade 80/100 and blinding
surface with 0.90 cum of stone aggregate of 6.7 mm size
(Passing 11.2 mm sieve and retained on 2.36 mm sieve) per
100 sqm of road surface including rolling and finishing with
power road roller etc complete, all as directed by Engineer-in-
charge.
14 Supply and fixing road reflected studs double side lens (RPM) 10.00 Each
of 3M Company or other approved brand to fix in road
center/curbstone including fixing with 100 gms of spoxy
mixture on the road, cost of all materials and labour charges
etc complete.
1 Removing the barbed wire fencing from existing poles at 1000.00 One Kg
various places including making them into bundles,
transporting the same to the places as directed.
2 Fixing barbed fencing to the RCC poles / MS angles 5000.00 One Rmt
horizontally and diagonally with GI binding wire including cost
of fixing materials. The payment shall be made for running
length of each row of fencing and including tightening the loose
barbed wire wherever necessary. The barbed wire shall be
supplied free of cost at BHEl stores.
4 Earth work excavation in all soils expectrock requiring blasting 100.00 One Cum
for drains/nallahs etc for all depths and depositing the earth
with in a lead of 10 M and dressing the bottom of excavation to
receives concrete etc complete.
5 Plain cement concrete 1:5:10 mix using 40 mm guage and 20.00 One Cum
down graded machine crushed granite metal (60% of 40 mm,
30% of 20 mm 10% of 10 mm) in foundation and flooring
including consolidation, curing and cost of all materials etc
complete.
6 Coursed rubble stone masonry 2nd sort in CM 1:6 in 5.00 One Cum
foundation and basement including curing, cost of all materials
etc complete.
7 Brick masonary in cement mortar 1:6 using ground moulded 3.00 One Cum
bricks of standard size including curing, cost of all materials
etc complete.
9 Vibrated RCC 1:2:4 nominal mix using 20mm down graded 10.00 One Cum
granite metal (60% of 20 mm, 30% of 12 mm to 10 mm, 10% of
6 mm to 4.75 mm) for fencing poles which shall be of size 0.10
M x 0.10 M at top and 0.15 x 0.15 M at bottom, length varying
from 1.80 M to 2.40 M including casting, curing, steel
shuttering etc, complete except cost of steel, it's fabrication and
placing.
11 Supplying and fixing barbed wire of two ply, 12 x 12 guage 150.00 One Kg
horizontally and diagonally fixed with GI binding wire including
cost of all materials etc, complete. The payment shall be made
for running length of each row of fencing.
12 Plastering in CM 1:6, 20mm thick including curing, cost of all 100.00 One Sqm
materials etc complete as directed by Engineer-in-charge.
13 White washing in 2 coats to RCC pole with shell lime as 200.00 One Sqm
directed by the Engineer-in-charge.
14 Fabrication and fixing of M.S gates (structural / tubular) of all 3.00 M.T
sizes including approved locking arrangements, necessary
fixing materials, two coats of painting over the primer etc
complete (structural steel will be issued free of cost at BHEL
Stores).
16 Supply and Stacking screened murram and spreading on 30.00 One Cum
walking track and rolling with power roller etc, complete as
directed by Engineer-in-charge.
17 Grass cutting including clearing light jungle, collection of 10000.00 One Sqm
stones, disposing the removed grass and light jungle to places
as directed by the Engineer-in-charge upto a load of 2 km.
19 Collection and supplying of screened fine black cotton soil 5.00 One Cum
including cost and conveyance to site and stacking as directed.
20 Painting one coat with synthetic enamel paint of approved 100.00 One Sqm
brand and shade on all surfaces including plastered, wooden,
steel etc, cleaning the existing surface, cost of all materials etc
complete.
21 Upkeeping of play fields by sweeping the areas neatly, watering, 30000.00 One Sqm
spreading screened murram, rolling with hand driven roller etc
complete as instructed
22 Carrying the earth / gravel from stacks to the areas of filling, 300.00 One Cum
spreading in layers of 150 mm thick watering, ramming and
consolidation with power roller of required capacity so as to
bring the surface to proper line, level camber and grade etc
complete as directed by Engineer-in-charge
23 Hire charges for providing Shamiana in good condition and 4000.00 One SFT
removing the same after the function is over. Necessary
shamiana, posts and all other connected materials should be
arranged by the contractor. Rate includes hire charges for all
materials , conveyance, all other incidentals etc. complete.
Entire arrangements should be made well before the
commencement of the funtion. For on day function (rate for one
day)
24 Hire charges for providing plastic chairs of approved quality for 1000.00 Each
one day.
26 Supply and fixing of G.I.Chain Link Mesh of 25 x 25 mm mesh 800.00 One Sqm
and 3 mm dia wire including cost of all materials etc., complete
all as directed by Engineer-in-charge.
1 Applying one coat of synthetic enamel paint of an approved 2000.00 One Sqm
brand and shande to kerb stones including cleaning the stones
properly, cost of all materials and labour etc complete.S.E.P of
approved shade and brand to kerb stones.
2 Applying two coats of synthetic enamel paint of an approved 500.00 One Sqm
brand and shade to kerb stones including cleaning the stones
properly, cost of all materials and labour etc complete.S.E.P of
approved shade and brand to kerb stones.
3 Applying one coat of synthetic enamel paint of Apcolite brand 300.00 One Sqm
and an approved shade to the speed breakers and road sign
boards including cost of all materials, labour etc complete.
4 Applying one coat of synthetic enamel paint of an approved 800.00 One Sqm
brand and shade to old iron work including cost of all
materials, labour etc complete.
5 Applying one coat of synthetic enamel paint of approved brand 100.00 One Sqm
and shade to road sign boards including cost of all materials,
labour etc complete.
6 Painting in two coats of synthetic enamel paint of an approved 100.00 One Sqm
brand and shade over a coat to new structural steel or iron
work including cost of all materials, labour cleaning the old
surface etc complete all as directed by Engineer-in-charge.
7 Painting one coat of Apcolite brand and approved shade of 2500.00 One Rmt
synthetic enamel paint on B.T surface for divider lines of 10
cms width including marking carefully with dimensions taking
full care for road traffic and as directed.
8 Applying two coats of synthetic enamel paint of Apcolite brand 150.00 One Sqm
and an approved shade to speed breakers and road sign boards
including cost of all materials etc complete.
9 Painting the township layout on supplied boards approximate 20.00 One Sqm
Size 3.00x1.50 M, as per the layout with different shades
indicating the functional and residential buildings separately
and in different colours for various types, bordering, index
preparations, key plan etc, complete as per the instructions
(The paints shall be of synthetic enamel for G.P of approved
make). The rate quoted shall include rubbing the existing
painting surface and cost of all the materials like brushes and
paints etc.
10 Preparing the supplied boards of different sizes to receive the 150.00 One Sqm
painting as per the drawing and painting the letters of different
sizes in different shapes with synthetic enamel paint of
approved make in different shades as per the instructions. The
quoted rate shall include rubbing of the existing painted
surface to receive the new painting and cost of all materials like
brushes, paints etc.
11 Providing radium sticker letters and arrow marks of approved 20.00 One Sqm
colour and design and size. The base board will be supplied by
the department and as directed by the Engineer-in-charge.
12 Supply and fixing of multi colour digital printing on paper 2.00 One Sqm
with lamination on 10 mm M.D.F.Board Supporting with Iron
Frame including all incidental charges etc complete as directed
by Engineer-in-charge.
13 Supply and fixing of self glow radium stikker on the radium 2.00 One Sqm
paper including cutting charges, fixing charges etc complete as
directed by Engineer-in-charge.
14 Re-lettering with black Japan paint of approved brand and 6000.00 Per letter per
manufacture for numbering to shops with black ground paint centimetre
and also iincluding cost of all material as directed by height
Engineer-in-charge.
15 Applying one or more coat painting with aluminimum paint of 150.00 One Sqm
approved brand and manufacture to give an even shade
including scrapping, cost of all mateirals, etc complete all as
directed by Engineer-in-charge.
19 Supply and fixing of satin cloth flags of 1 mtr x 3 mtrs in size 75.00 Nos
and providing BHEL manogram on the flag including stitching
charges, cost of all materials etc., complete.
20 Supply and fixing of radium plain sheet wherever required as 10.00 One Sqm
directed by Engineer-in-charge.
3 Supply of 20mm guage hard granite stone metal including cost 12.00 One Cum
and conveyance to site and stacking as directed by the
Engineer-in-charge.
4 Supply of 12mm guage hard granite stone metal including cost 24.00 One Cum
and conveyance and stacking as directed etc complete.
5 Collection and supply of stone dust /screenings (quarry dust) 36.00 One Cum
150 micron nominal size etc complete as directed by Engineer-
in-charge.
7 Supply of good quality coarse River Sand Bhodan / Karimnagar 50.00 One Cum
/ Kurnool / Sirisilla quality including cost and conveyance to
site and stacking neatly as directed by the Engineer-in-charge.
b) underground reservoir of 1.35 lakhs / 2.50 lakhs / 3.30 lakhs 3.00 Operation
gallons capacity.
c) Overhead tank of 0.50 lakhs / 1.1 lakh gallons capacity (18 3.00 Operation
mtrs staging).
d) Overhead tank of 5,000 gallons capacity. (4 mtrs staging). 2.00 Operation
2 Earth work excavation / road cutting in trenches for 300.00 One Cum
foundations and for pipes etc., for all depths including
dressing and ramming the sides and bottom, strutting, shoring
if any, depositing the soil as directed within a lead of 10.00 M
in all soils except rock requiring blasting.
10 Changing and tying of indicator wire for overhead tanks of 18 6.00 Operation
meter, staging with Nylon wire to the float ball on one side and
to the indicator on the other side (Rate includes the cost of
Nylon wire and labour).
11 Refilling trenches with excavated soils including watering and 350.00 One Cum
ramming etc complete.
14 Supply and fixing of copper float ball of 30 cm dia made with 1 2.00 Each
mm thick copper sheet all as directed by the Engineer - in -
charge.
17 Changing and tying of indicator wire for U.G.R tanks of 1.00 to 8.00 Operation
2.50 lakhs with Nylon brass wire to the float ball on one side
and to the indicator on the other side (only labour charges).
18 Removal and rectification of hand pumps from the borewells of 2.00 Each
100 / 112mm dia upto all depths by applying necessary tools
removal of GI pipe attached to the hand pump and installation
of the unit after rectification to the satisfaction of the Engineer-
in-charge
PART-B
2 Supplying and fixing of brass spindle rod with brass nut 60.00 One Kg
suitable to the sluice valve of 80mm to 300mm dia valves. (The
payment will be made as per net weight of the raw material
before replacing the spindle rod).
3 Cleaning of fountain pools and water jets by removing water 48.00 Each
manually and applying bleaching powder to the pool and operation
cleaning with coir brushes etc., complete. (12 operations of
Rock garden fountain included.
e Supply & fixing of 3mm thick rubber packing for use on C.I/G.I 50.00 One Kg
lines
f Supply and fixing of 300 x 300 x 10 mm thick leather packing 6.00 each
including labour charges cost of all materials etc complete
g Supply and delivery of M.S bolts and nuts with double washers 40.00 One Kg
including taxes and conveyance etc., complete (1/2" to 1").
1 Earth work excavation in all soils except rock requiring blasting 800.00 One Cum
for drains/nallahs etc for all depths and depositing the earth
with in a lead of 10 M and dressing the bottom of excavation to
receives concrete etc complete all as directed by Engineer-in-
charge.
2 Cement concrete 1:5:10 mix using 40 mm guage down graded 12.00 One Cum
hard machine crushed granite metal including curing, cost of
all materials etc., complete all as ditected by Engineer-in-
charge
3 Coursed rubble stone masonary 2nd sort with hard granite 75.00 One Cum
stone in foundation and plinth with cement mortar 1:6 (1
cement: 6 coarse sand). ( For construction of man holes) etc.
complete all as directed by Engineer-in-Charge.
4 Brick work with Ground Moulded Brick in CM 1:6 (1 cement : 6 15.00 One Cum
coarse sand) including curing, cost of all materials etc.,
complete as directed by Engineer-in-charge.
6 Refilling the foundation and basement with excavated soils 600.00 One Cum
including watering, consolidation etc., complete all as directed
by Engineer-in-charge.
7 Providing , laying and jointing glazed stone ware pipes grade 'A' 500.00 One Rmt
with stiff mixture of cement motar in the proportion of 1:1 (1
cement : 1 fine sand) including testing of joints etc., complete,
of 100 mm diameter all as directed by Engineer-in-charge.
8 Providing , laying and joining glazed stone ware pipes grade 'A' 700.00 One Rmt
with stiff mixture of cement mortar in the proportion of 1:1 (1
cement : 1 fine sand) including testing of joints etc., complete,
of 150 mm diameter all as directed by Engineer-in-charge.
10 Earth work excavation in slushy soils including removing the 75.00 One Cum
sewage water and scum from the pit of broken sewer lines,man
holes, chambers etc., to enable building new ones (sewage
gangman are to be engaged if nacessary) etc., complete all as
directed by Engineer-in-charge
b) For main Man holes upto any depth existing in township. 200.00 Nos
13 Rock cutting over (exceeding 30 cm in depth, 1.5 m in width 5.00 One Cum
as well as 10 sq.m on plan) including stacking at site and
disposal of excavated rock, lead upto 50 m and lift upto 1.5 m,
disposed earth to be levelled and neatly dressed, hard rock
(blasting prohibited). Payment will be made on the basis of
stack measurement, deducting 40% towards voids.
14 Reinforced cement concrete 1:2:4 nominal mix using 20mm 5.00 One Cum
guage down graded hard granite metal including casting,
curing but excluding cost of steel and it's fabrication which will
be paid for separately for manhole covers (circular and
rectangular) etc., inclusive of conveying and fixing in position
at the location given etc., all as directed by the Engineer-in-
charge.
16 Excavating and conveyance of spoils around the dust bins etc 500.00 One Cum
upto a distance 3 km including loading unloading and
spreading in low lying areas etc, complete as directed by
Engineer-in-charge.
17 Centering and shuttering including strutting propping etc and 100.00 One Sqm
removal of form for all type of concrete works etc complete as
directed by Engineer-in-charge.
1 Earth work excavation including dispoal of excavated earth 300.00 One Cum
upto 50 m and lift upto 1.5 m disposed soil to be levelled and
neatly dressed, for all kinds of soils.
3 Exavating and Conveyance of red earth / black cotton soil of 400.00 One Cum
approved quality including cost and conveyance to site and
stacking as directed by the Engineer-in-charge. (The agency
will be shown the red earth with in the premises of BHEL
township within 4 km lead).
4 Turfing / debling slopes including cutting, conveyance and 200.00 One Sqm
supplying to site including watering, rolling etc., complete.
5 Supply of Cattle manure including cost and conveyance to site 75.00 One Cum
and stacking as directed by Engineer-in-charge.
6 Supply and stacking of best quality local sand including cost 25.00 One Cum
and conveyance to site as directed by Engineer-in-charge
8 Flooring with 25mm thick rough shahabad stone slabs, over a 10.00 One Sqm
base of 20mm thick in CM 1:6, including pointing in
CM 1:3 including cost of labour but excluding cost of rough
shahabad stones which will be supplied by BHEL free of cost
etc., complete.
9 Refilling the pits and trenches with excavated spoils / supplied 200.00 One Cum
earth including consolidation etc. complete.
10 Supplying of PVC decorative flower pots of syntex make of size 25.00 Each
16" (40.64 cm) height and top dia. of approved design and
terracotta finish including cost and conveyance to site as
directed by the Engineer-in-charge.
11 Supplying of PVC decorative flower pots. Top dia 16" and height 25.00 Each
of 14"
12 Providing best quality Korean carpet lawn turfing to the lawns 600.00 One Sqm
as per the required profile and shape, rolling, watering for six
days as directed by the Engineer-in-charge.
13 Brick work in CM 1:6 using ground moulded bricks for all 20.00 One Cum
thicknesses for walls in super structure including curing, cost
of all materials, etc., complete.
14 Coursed rubble masonary second sort with hard granite stone 15.00 One Cum
in foundation and plinth in cement morotr 1:6 including
curring cost of all materials as directed by Engineer-in-charge
15 Pointing to stone work with cement morotr 1:3, including 25.00 One Sqm
curring cost of all materials etc complete, as directed by
Engineer-in-charge.
16 Plastering in CM 1:6, 20 mm thick including curing, cost of all 200.00 One Sqm
materials etc., complete.
17 Applying two coats of white washing/colour wash to trees 2000.00 One Sqm
including cleaning the surface of trees, cost of all materials
etc., complete.
19 Providing and placing in position of small pebbles of river stone 4.00 Each
of white/red/gray colours etc., complete each bag contains
50kgs of stones etc complete
20 Providing and placing in position of small colored stone chips 6.00 Each
in different colours as approved by Engineer charge. Each bag
contains 50 kgs chips etc complete.
22 Supply and fixing of GPI-Hyderabad make SFRC Park Bench 10.00 Nos
(R.C.C.) of size 60" x 36" x 30". Bottom Slab 15" wide 2" thick
and top slab 12" wide, 1½" thick, including transportation cost
of all materials etc complete all as directed by Engineer-in-
charge.
g) Slider 6' x 12'x1.5' Feet (20G STST Sheet) SSLR-22 (S+S+) 3.00 Each
24 Scraping the existing water fountain pool and applying 2 coats 500.00 One Sqm
of synthetic enamel paint of approved shade and brand
including cost of all materials etc complete as directed by
engineer-in-charge
25 Supply and filling with river sand wherever required i.e. mostly 20.00 One Cum
at the play equipment as directed by Engineer-in-charge.
Part-B
1 Engaging a tractor with hydraulic lift trialor for transporting of 25.00 One day
the tree trunk / branches from township at various places to
nursery including loading, unloading etc with minimum man
power required complete as directed by engineer-in-charge. (the
tractor shall have valid fitness certificate).
2 Supply of JCB for removal of roots under the ground after 25.00 One Hour
cutting the tree, for levelling the ground, for removal of thick
jungle etc complete all as directed by Engineer-in-charge.
3 Arresting the stray cattle from surrounding areas into 365 one operation
the township by keeping watch at entry points around Operation
the fencing and making proper patrolling inside the
township and driving away the cattle to outside the fence
or to drive them to the cattle pond and handing over to the
cattle pond incharge under proper acknowledgement the
average estimated cattle to be driven is 100 cattle per operation
with an approx. lead of 5 KM including cost of require tools,
safety equipments etc., all as directed by the Engineer-in-
charge.
1 Attending to the activities at swimming pool and planning office 302 One operation
including cost of require tools, safety equipments etc
(iii) Cleaning of inside and side wall and sweeping the floor etc. for
removal of scum etc. (400 sqm) once in a day.
2 Providing support services for operation of pumps attending to 302 One operation
the leakage complaints to the pumps, including cost of require
tools, safety equipments etc., complete as directed. (the works
is of semi skilled nature atleast minimum 4 persons to be
deployed on work).
3 Sweeping of open areas, and wear around pump houses, 15100000 50000 sqm
operator rooms at Main water works, borewll water works and
underground reservoirs, including cost of require tools, safety
equipments etc., complete all as directed by Engineer-in-
charge.
4 Providing support services for operation of bore well pumps 302 One operation
around 10 nos of bore wells in each shift and the work is to be
carried out in round the clock shift duties and operation of
valves in township at different locations to release the water to
township from the bore wells, including cost of require tools,
safety equipments etc., complete as directed by Engineer-in-
charge (Minimum 2 un-skilled persons to be deployed on the
work).
1 Sweeping of roads, berms, conservency lanes, side drains and 93620000 310000 sqm
surrounding areas including picking of stones, cleaning of Sq.m
animak excrete, collecting and putting of rubbish and garbage
to the dustbins, including cost of required tools, safety
equipments etc complete, as directed by engineer-in-charge
(The agency as to provide 124 nos of coconut brooms weighing
500 grams of weight per person per month to carryout the
work).
27 MAINTENANCE OF BUILDINGS IN
TOWNSHIP.
1 Organising the water to various places and associating with 1208 One
tractor for loading, unloading materials, including cost of Operation
require tools, safety equipments etc., complete all as directed
by Engineer-in-charge.
4 Maintenance of roads and culverts, repairing, removal of silt, 1812 opern One
attending for road patch works, pot holes, etc., complete, Operation
transportation of materials including any other miscellaneous
works as directed by attending minimum two complaints in
each operation by enguaging atleast minimum one person,
including cost of require tools, safety equipments etc.,.all as
directed by Engineer-in-charge. )It is assessed that minimum
6 persons to be enguaged on work for each operation).
5 Collection, removal of materials and disposal to places specified 302 Tractor / day
(upto 4 Kms lead) in township including loading, unloading,
seggregating, stacking, required tools and equipment etc.,
providing by engaging one tractor with driver attahced
hydraulic lift including the cost of operation, cost of repairs for
complete operation and including cost of require tools, safety
equipments etc complete all as directed by the Engineer-in-
charge.
3 Cleaning of sludge drying beds at S.T.D. Plant 3 Nos. of size 26 10 One Opern
M X 18 M X 0.15 M including removing and dumping the
material within 100 M, including cost of require tools, safety
equipments etc all as directed by the Engineer-in-charge (once
in a month).
3 Maint. Of public places like weekly shandies, marriage halls 302 One operation
and other non-resisdential buildings by cleaning the floors
etc.,and attending misc works including cost of require tools,
safety equipments etc., all as directed (the scope is palced at
Annexure.
1 Collection of garbage on daily basis from the door step of 57000 qtrs Each quarter
the quarters/non-residential buildings from entire per month
Township, inside CISF Quarters Promoting/
implementing source segregation, documentation,
composting and recycling the garbage by engaging
required No. of Tri-cycles suitably designed for collection,
source segregation and transportation of garbage to
compost yard on daily basis before 11.00 AM on every
day where organic waste put into beds, covered with
polythene sheets and inorganic re-cyclable waste
segregated into paper, plastic, metal and glass, etc.,
should be disposed off accordingly on all days without
break. The rate quoted shall include.
2 Eradication of stray pigs found near the zero waste beds 100 Nos Each
by applying machanism after disscusion with the
department including disposal of dead pigs by a way of
collection, carrying and burying them in a scientific way
at the places as directed by the department including
cost of all materials and required machinery required
etc., complete
Note:- The tenderers are required to quote their tender value on %age basis at excess or less or on par with
value.
Excess
Less
Estimate
rate only
Conditions:
1 A penality of 0.5% of the gross value of work will be levied for every week's delay of work subject to a maximum penalit
gross value of work.
2 All BHEL general conditions of contract and special conditions enclosed to this document are applicable to this work.
3 In case there is any difference in the quoted rates between figures and words, the resultant higher tender value will b
evaluation of tender priority and while awarding, lower tender value will be taken and this should be binding on the con
4 The department reserves the right to cancel the work without assinging any reasons therefor.
5 The billing is done as per the units specified and completion to the satisfaction of Engineer-in-charge.
6 The quantities shown above are approximate and liable for variation.
7 The rates quoted by the contractor shall be inclusive of all taxes othe than service tax etc as applicable from time to tim
8 Service tax if paid by the contractor with respect to this work will be reimbursed by BHEL on production of documen
having paid the service tax by the contractor.
9 All the bills of the contractors will be cleared subject to the production of clearance certificate by the contractors in resp
of all statutory requirement, issued by IR section of personnel department.
10 In case more than one agency becomes L1 by quoting same rates, further sealed quatations will be called for, from thos
only to decide final agency with further lowest rates. No agency shall quote more than his original tender rates, while re-
TOTAL 33,039,394.34
ons therefor.
Engineer-in-charge.
Fields, etc.
Total 22 Nos
Contractor
Total Area to be
maint
1020 m2
250 m2
110 m2
13000 m2
9000 m2
814 m2
80 m2
80 m2
1000 m2
440 m2
28,000 m2
1500 m2
issuing officer
BACK GROUND: Today the growing concern about waste generation and its manage
increasing across the Globe. There are two Major solutions offered and being practice
developed countries are sophisticated and very expensive. Developing countries such a
and other Nations just collect, transport and dump the solid waste at open lands nearby
causes environmental imbalances and degradation. Valuable rich land is being spoiled,
water being polluted and by burning the garbage, toxic smoke pollutes air. Till recently,
not much awareness or consciousness neither among the people nor among the Governm
Presently, we are transferring the problems from one place to another by collecting, tran
and dumping the garbage within the Township, which gives temporary relief and per
environmental degradation. There is a need to look at waste management methods to sa
our environment. There is a need for BHEL Township to evaluate the existing met
waste management and introduce Eco-friendly and cost effective waste managemen
The community dustbins are attracting rag pickers, beggars, dogs, pigs and cattle.
unhealthy and unhygienic and also creates lot of nuisance to Neighbor hood.
ZERO WASTE MANAGEMENT: In the year 2001, a pilot project for implementation o
waste management in NH-V & VI” area was awarded to out side agency and imple
successfully. In this method garbage being collected from door to door through tr
Garbage collections start at 06.00AM and gets finished at 11.00AM on all days. The com
bins were removed from NH-V & NH-VI area. Collected garbage from house hold
segregated in to composting waste, food waste, recycling, fuel and absolute wast
transported to the composting shed, where the organic waste gets composted and re
waste were packed for sending to recyclable factories. Now the entire NHV & NH VI
garbage free / complaint free and problem less area.
// 2 //
Commercial/Bulk waste from marriage halls, market place, shops, banks, Union offices,
International Club, C.C, Guest houses, GMP Hostels, HRD Hostels, Hotels etc.
Waste from public places is leaf litter, tree stems, road sweeps, garden waste from parks and playg
AREA MAPPING: Maps should be created for easy collection and also for tricycle routing.
REMOVAL OF BULK GARBAGE: Bulk garbage from marriage halls, Guest houses, GMP Hot
Hostels, union offices, weekly markets, shops and other non-residential buildings should be col
engaging tractors and engaging additional labour. The bulk wastage collected should be
segregated into organic waste and inorganic waste and should be tackle in line with domestic garb
COMPOSTING OF ORGANIC WASTE: The waste collected from the Township should be shifte
designated composting yard. After ensuring segregation of organic and inorganic waste, organ
generated should be composted by the agency using window row technique treated by cow dun
The waste generated after sieving will be utilized for mulching of open areas.
RECYCLING OF INORGANIC WASTE: The collected inorganic recyclable waste should be segreg
paper, plastic, metal and glass. Then all the recyclable waste will be baled or packed for dis
recyclable units with the knowledge of Engineer in charge.
ABSOLUTE WASTE: The left over absolute waste such as thermo cols, leather goods etc. will
land filled under proper supervision.
HANDLING & DISPOAL OF SANITARY NAPKINS: All sanitary napkins shall be collect
segregation for safe burial at the designated landfill sites under close supervision.
TENDER COCONUT SHOPS: Tender coconut shells shall be collected every day and dried up o
authorized locations and should hand over to the Dept.
HANDLING OF HARZADOUS WASTE: Batteries and any other notified hazardous waste sh
collected for proper disposal as per the guidelines by using the required PPES. The disposals
through trained staff for the purpose and as directed by the Engineer-in-charge.
REMOVAL OF DUST BINS: All the community dust bins if available should be removed by th
within 15 days, on commencement of “Zero Waste management in Township” to eliminate activi
as rag picking and beggars, stray dogs, pigs and stray animals.
BURNING OF WASTE: Burning of waste, papers, dry leaves, grass or any waste materials sh
happen in the Township. On implementation of Zero waste management Township should b
Smoke, pollution. A clean & green Township is the essence of Contract of Zero Waste Mana
the incinerakavs if warranted shall be discussed and proper system shall be imposed.
DOCUMENTATION & REPORTS: Each and every activity, process, volumes and weights sh
documented meticulously for Township Administration. Daily monitoring and feed back me
should be available. Monthly reports on garbage generated and treatment should be provided to B
claiming payments from BHEL.
// 3 //
SPECIAL CONDITIONS
01. The agency should engage required number of tri-cycles to ensure lifting of g
from the quarters between 06.00AM to 11.00AM on all days. The street beautifie
wear apron & gloves and alert the residents by blowing whistles & Horns. The g
removal should be done at regular timings as specified by the Dept. (As per th
mapping approved by Dept.)
02. All the Tri-cycles / Tractors engaged should be Neat & Clean and shoul
separate compartments for storing segregated waste of organic and inorganic.
tri-cycles & tractors should carry the slogan of “Clean & Green Township” agenc
& contact Tele. Nos.
03. Bulk garbage from non-residential buildings and waste from open areas sho
removed by engaging tractors and additional labour on regular basis. The tra
tailors engaged for bulk garbage should have road fitness, Pollution certificat
should have hydraulic tilting facility. The make of the tractors should not be old
1993.
04. Since the garbage removal is to be done on all the days, including Sunda
holidays.
05. The agency shall providing Cellular phones to all the work to I/CS super
attend the complaints of the residents immediately. (The contact Phone number
supervisors should be clearly indicated on all the tri-cycles and Tractor Tailors)
07. Garbage should not be burnt either by the agency or by unauthorized perso
any from. If burning is observed in Township a penalty of Rs. 500=00 will be rec
from the agency for each occasion / occurrence.
08. Smoke free & Pollution free and “Zero waste Management in BHEL Towns
the essence of contract..
// 4 //
GENERAL CONDITIONS
01. The agency shall have to furnish lifting plan indicating the area wise timin
and location of the composting yard to the Engineer-In-Charge..
02. The vehicle loaded with solid waste should be covered with tarpaulin / plast
to avoid falling on the roads during transportation.
03. The agency shall ensure that the domestic garbage is collected before 11.00
all days and bulk garbage should be collected before 02.00 PM.
04. The contractor shall not in any way adopt illegal and foul methods, or exerc
corrupt practices
05. Every morninginthe
collusion
agency with
mustany thirdthat
ensure parties. Breach of shall
the Tri-cycles this condition
report at wil
ap
cancellation of the contract and forfeiture of the Security Deposit.
place at 06.00AM with the work force. If the Tri-cycle fails to report in ti
following fines will be imposed.
08. The agency shall possess cellular phone and keep it in use. Failure to do
attract a fine of Rs.100=00/- per each observation.
09. All the statutory obligation required to be observed as per BHEL, AP Po
Board, Who and any other similar organization shall be adopted in princ
consultation with Township Administration / The Engineer I/C.
10. “Zero Waste Management, Clean & Green Township” is the essence of contrac
SIG.OF CONTRACTOR(S) ISSUING AUTHORITY
Annexure Group-II Item No.8
Contract
HEL TOWNSHP.
contd…2.
S: Source of waste
contd…3.
r by unauthorized personnel in
of Rs. 500=00 will be recovered
G AUTHORITY
contd…4.
ing the area wise timings
Charge..
d with tarpaulin / plastic Nets
n - Rs. 500/-
tion - Rs. 1,000/-
on - Rs. 1,500/-
o either residents or to the
Such damages if any caused,
l be final and binding on the
Note:- The above operations includes cutting of Tree Branches, Cutting and Dressing of
Plants to the shapes etc., and disposals as directed with an average lead of 5 km long with c
residental and non residental buildings by using penumatic vehicles and operational cost th
Contractor
Annexure Group-II Sl.No.7 Specification No.1
2
20
issuing officer
Group-II Sl.No.6 specification item no. 3
Singature of Tenderer
Annexure
1500m2 * 3
operation / week *
4 weeks * 12
months
3300m2 * 3
operation / week *
4 weeks * 12
months
ISSUING OFFICER
Group-II Sl.No.6 Item No.2
SL.
ACTIVITY DESCRIPTION UNIT QTY FREQUENCE
NO.
1 2 3 4 5 6
Lawns and
1 Watering Sq. Mtrs. 13,400 Twice in a week
Hedges
Shrubs and
Nos. 440 Twice in a week
Trees
Removal of
Lawns and
2 Weeds and Sq. Mtrs. 13,400 Once in 15 days
Hedges
mulching
Application
Flower beds and
4 of pesticides Sq. Mtrs. 500 5 Times in a year
Plant boxes
etc.
Manuring
and Shrubs and
5 Nos. 440 5 Times in a year
pesticides Trees
application
Placing of
6 Potted Plants Nos. 1,200 50 times in a year
potted plants
Parks, Lawns,
7 Cleaning Sq. Mtrs. 13,400 Once in a day
Open areas
NOTE: The operations include cutting of Tree branches, cutting and dressing of ornamental plant
shapes, etc.
Signature of Tenderer
Annexure-A
REMARKS
Issuing Officer
Group-II Sl.No.5 Specification No. 1.
1 Cleaning surroundings
Contractor
ANNEXURE
5 Specification No. 1.
10,500 m2/
(once in a day)
480 nos (4nos per day)
one operation
10m3/operation
Issuing Officer