Quality Assuarance - Sop For Cleaning of Sparkler Filter

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 5

3/1/23, 5:05 PM QUALITY ASSUARANCE: SOP FOR CLEANING OF SPARKLER FILTER

More Create Blog Sign In

QUALITY ASSUARANCE

T h u r s d a y, 2 6 S e p t e m b e r 2 0 1 3

SOP FOR CLEANING OF SPARKLER FILTER

I.         PURPOSE
To define the Standard Operating Procedure for Cleaning of Sparkler
Filter.
II.       SCOPE
This procedure is applicable for Sparkler filter used in Production
Department at Unit-V.
III.      RESPONSIBILITY
Assistant , Executive - Production
IV.      ACCOUNTABILITY
Head - Production
V.                PROCEDURE    
1.0      BATCH TO BATCH CLEANING 
1.1    Ensure that the Sparkler Filter is not in operation.
1.2    Update the Equipment status as “Under Cleaning”.

1.3        Enter the Cleaning starting time in the equipment usage


log Format No. F01/SOPPR077-00.

1.4    Wear personnel protective equipments as required.


1.5    Ensure that the inlet & outlet valve of the Sparkler filter
is closed.

1.6      Dismantle the flange joints from either side of the


Sparkler filter from the lines.

1.7    Transfer the filter to cleaning area.


1.8              Unscrew the nuts on the lid of the Sparkler filter and
remove the lid from the shell.

1.9          Unscrew the center bolt and remove the filter plate
assembly.

1.10       Remove the filter plates, meshes and filter pads one by
one. Collect filter pads in a container with LDPE bag
and send it to designated solid waste staging area.
1.11            Clean the lid, filter plates, meshes and inside of
Sparkler Filter with   50 Lt of potable water.

pharmaqualityassuarance.blogspot.com/2013/09/sop-for-cleaning-of-sparkler-filter.html 1/5
3/1/23, 5:05 PM QUALITY ASSUARANCE: SOP FOR CLEANING OF SPARKLER FILTER

1.12            Check inside of Sparkler Filter for cleanliness, if it is


not clean repeat the step. No.1.11.
1.13            Flush the Sparkler Filter, parts and wash the platform
and outer portion with 25  

           Ltrs of purified water.


1.14       Assemble the filter plates, meshes and new filter pads
one above the other in a
                    sequential manner and tighten the peripheral bolts
firmly.

1.15            Place this filter plate assembly in the Sparkler filter


and tighten the center bolt. Check the alignment.
1.16            Place the lid on the Sparkler Filter and tighten the
bolts firmly.
1.17            Wipe the platform and outer portion of the Sparkler
Filter with lint free cloth.
1.18       Transfer the Sparkler Filter to process area and refit it
to the filtration lines.

1.19       Check that the area around the sparkler filter is clean

1.20       Update the Equipment status as “CLEANED”.


1.21            Enter the Cleaning completion time in the equipment
usage log Format No. F01/SOPPR077-00.

2.0       PRODUCT CHANGE OVER CLEANING :         

2.1              Perform Batch-to-Batch  cleaning from step no. 1.1 to


1.10.

2.2              Clean the lid, filter plates, meshes and inside of


Sparkler Filter with   30 Lt of Ammonia solution.
2.3              Wash the Sparkler Filter, parts, platform and outer
portion with 100 Lt of Potable water up to neutral pH .

2.4        Rinse the sparkler filter and parts with 30Lt of purified
water and send sample to QC.

2.5        Send swab samples to QC , sampling shall be done as per


drawing.
2.6              Assemble the filter plates, meshes and new filter pads
one above the other in a sequential manner and tighten
the peripheral bolts firmly.

2.7        Place this filter plate assembly in the Sparkler filter and
tighten the center bolt. Check the alignment.

2.8        Place the lid on the Sparkler Filter and tighten the bolts
firmly
2.9              Wipe the platform and outer portion of the Sparkler
Filter with lint free cloth.

2.10      Transfer the Sparkler Filter to process area and refit it


to the filtration lines.

2.11    Check that the area around the sparkler is clean


2.12    Update the Equipment status as “CLEANED”.

2.13      Enter the Cleaning completion time in the equipment


usage log in Format No. F01/SOPPR077-00.
VI.       REVISION SUMMARY

pharmaqualityassuarance.blogspot.com/2013/09/sop-for-cleaning-of-sparkler-filter.html 2/5
3/1/23, 5:05 PM QUALITY ASSUARANCE: SOP FOR CLEANING OF SPARKLER FILTER

Version No. Revised on Reason for Revision

00 NA
NA

END OF THE DOCUMENT

Posted by PHARMACEUTICAL at 01:53

3 comments:

Unknown 21 January 2018 at 01:51

‫شركة تسليك مجارى باالحساء‬

Reply

15‫ شركة معمار المرشدى‬August 2018 at 04:21

‫شركة ركن المثالية‬


‫بيع وشراء االثاث‬
‫خدمات تسليك مجاري‬
‫خدمات تنظيف منازل‬
‫خدمات رش دفان‬
‫مكافحة الحشرات‬
‫تركيب باركيه‬

Reply

Abdul Bake 20 October 2018 at 22:28

informative

Reply

To leave a comment, click the button below to sign in with Google.

SIGN IN WITH GOOGLE

Newer Post Home Older Post

Subscribe to: Post Comments (Atom)

Blog Archive Total Pageviews

►  2015 (2)
► 
2 7 0 5 9 9
▼  2013 (124)
▼ 
►  October (1)
► 
Popular Posts
▼  September (122)
▼ 
Chlorogenic acid content 14-SOP FOR HANDLING OF DEVIATION
Charantin content I.                   PURPOSE To describe the investigation and control
procedure for any type of deviation, which can affect the qua...
Baccosides content
SOP FOR VENDOR QUALIFICATION
Asiaticoside content
I.           PURPOSE To define a Standard Operating Procedure for the
Method for the estimation of Withanolides content approval of vendors supplying raw material and packing materia...
Method for the estimation of Total Triterpenes con...
SOP FOR HANDLING OF RETURNED GOODS
Method for the estimation of Tannin content I.                    PURPOSE   To describe the procedure for handling the
returned goods. II.                 SCOPE This proced...
Method for estimation of Sennosides content
Method for the estimation of Saponin content SOP FOR OPERATION OF STAINLESS STEEL REACTOR
Method for the estimation of Protein content I.                    PURPOSE To define the Standard Operating Procedure
for Operation of Stainless Steel Reactor. II.            ...
Method for the estimation of Total Polyphenols con...

pharmaqualityassuarance.blogspot.com/2013/09/sop-for-cleaning-of-sparkler-filter.html 3/5
3/1/23, 5:05 PM QUALITY ASSUARANCE: SOP FOR CLEANING OF SPARKLER FILTER
Method for the estimation of Piperine content SOP FOR INVESTIGATION OF OUT OF SPECIFICATION (OOS) RESULT
Method for the estimation of Phaseolin content I.                    Purpose   The Purpose of the investigation is to
determine the cause of the Out Of Specification results. II....
Method for the estimation of Morindin content
Levo dopa content SOP FOR ANNUAL PRODUCT REVIEW
I.                    PURPOSE To define a procedure to perform Annual
Method for the estimation of Ketosteroids content Product Review of finished APIs and Intermediates. II.  ...
Gymnemic acid content
SOP for Preparation, qualification, Usage and destruction of working
Total Guggulusterones (By UV)
I.                    PURPOSE To define the procedure for Preparation,
Glycyrrihizin content qualification, Usage and destruction of working standards. ...

Total Gingerols content (By UV) Procedure for Line clearance


Method for the estimation of Fulvic acid content Procedure for Line clearance ·          After receiving intimation for
line clearance from Production, Q.A Officer visit the concer...
Flavonoids content
Total Curcuminoids Content by HPLC SOP FOR ENTRY, EXIT AND GOWNING PROCEDURE FOR POWDER
PROCESSING AREA
Curcuminoides content (By UV) I.          PURPOSE             To define the Standard Operating Procedure
Method for the estimation of Corosolic acid content for Entry, Exit and Gowning procedure for Powder Processi...

Boswellic Acid content SOP FOR the operation of magnetic stirrer


Method for the estimation of Bitter content I.                    PURPOSE To describe the procedure for the operation
of magnetic stirrer. II.                 SCOPE This pr...
Andrographolides content

Alkaloid content in Ashwagandha Root


Acidity in Garcinia cambogia fruit
Preventive Maintenance Record

Housekeeping Audit Check List


VOLUMETRIC SOLUTION ANALYSIS REPORT

Swab Testing of Hand / Equipment


Out of Specification Form
Internal Audit Observation Sheet

COMPETENCY REQUIREMENTS
Handling of Market Complaints in Pharmaceuticals

Re-Testing of Raw materials


Product Recall Procedure in Pharmaceuticals
Procedure for Line clearance
PACKING RECORD OF PHYTOCHEMICALS
Good Documentation Practices (GDP) in Pharmaceuticals

CLEANING VALIDATION PROTOCOL


The procedure describes the guidelines for the han...
SOP FOR OPERATION OF STAINLESS STEEL REACTOR
SOP FOR OPERATION OF FLUID BED DRYER
SOP FOR OPERATION OF NUTSCHE FILTER
SOP FOR OPERATION OF HOIST
SOP FOR ENTRY, EXIT AND GOWNING PROCEDURE FOR POWD...
SOP FOR CLEANING OF SPARKLER FILTER
OPERATION AND CALIBRATION OF PH METER
SOP FOR SPILLAGE OF GROWTH CONTAINING SOLID OR LIQ...
DISPOSAL OF USED MEDIA
SOP for the operation of colony counter
SOP FOR CLEANING AND MAINTENANCE OF LAMINAR AIR FLOW
SOP for the operation of BOD incubator
SOP for the operation of Autoclave
SOP for operation of anerobic jar
SOP for the operation of Air sampler
ACCIDENT / INCIDENT INFORMATION REPORT
SOP FOR OPERATION OF FIRE EXTINGUSHERS
SOP FOR HANDLING OF PERSONNEL PROTECTIVE EQUIPMENT
SOP FOR the operation of magnetic stirrer
SOP for operation of Tap density tester
SOP for operation of Ultrasonic sonicator
operating procedure for Analytical Balance

SOP for operation of Vacuum oven


SOP for operation of Muffle furnace
SOP FOR WASHING OF HPLC COLUMN

pharmaqualityassuarance.blogspot.com/2013/09/sop-for-cleaning-of-sparkler-filter.html 4/5
3/1/23, 5:05 PM QUALITY ASSUARANCE: SOP FOR CLEANING OF SPARKLER FILTER
SOP FOR VALIDATION OF ANALYTICAL TEST PROCEDURE
SOP for Preparation, qualification, Usage and dest...

REFERENCE STANDARD USAGE RECORD


SOP for procurement and handling of Reference stan...
SOP FOR HANDLING OF HAZARDOUS AND TOXIC CHEMICALS
CLEANING VALIDATION SAMPLES INWARD RECORD
pH BUFFER SOLUTION PREPARATION RECORD

SOP FOR PREPARATION OF SOLUTIONS


SOP FOR HANDLING OF REAGENTS

ANNUAL CALIBRATION SCHEDULE


SOP FOR CALIBRATION OF QC INSTRUMENTS
SOP FOR GLASSWARE CLEANING

SOP FOR ANALYST VALIDATION


LAB CLEANING RECORD
SOP FOR LAB CLEANING

INSTRUMENT USAGE LOG


SOP FOR MAINTENANCE OF QC INSTRUMENT USAGE LOG

SOP FOR CORRECTIVE AND PREVENTIVE ACTION


OUT OF SPECIFICATION LOG
PHASE II INVESTIGATION REPORT FOR OSS

PHASE I INVESTIGATION REPORT OF OSS


SOP FOR INVESTIGATION OF OUT OF SPECIFICATION (OOS...

SOP FOR ANNUAL PRODUCT REVIEW


SOP FOR TRAINING
SOP FOR VENDOR QUALIFICATION
VENDOR SAMPLES REQUEST CUM REPORT
VENDOR QUALIFICATION QUESTIONARY

RECALLED PRODUCT CHECKLIST


DESTRUCTION APPROVAL FORM
AUTHORIZATION FOR PRODUCT RECALL

►  August (1)
► 

About Me

PHARMACEUTICAL
JAMNAGAR, GUJARAT, India
PARAS PATEL QA Executive if you have any query pl
contact me helyparas@gmail.com
View my complete profile

Simple theme. Powered by Blogger.

pharmaqualityassuarance.blogspot.com/2013/09/sop-for-cleaning-of-sparkler-filter.html 5/5

You might also like