Professional Documents
Culture Documents
2 1996 - Compress
2 1996 - Compress
60617-2:1996
IEC 617-2:
1996
National foreword
This British Standard is the English language version of EN 60617-2:1996. It
is identical with IEC 617-2:1996. It supersedes BS 3939-2:1985 which is
withdrawn.
The UK participation in its preparation was entrusted to Technical Committee
GEL/3, Documentation and graphical symbols, which has the responsibility to:
— aid enquirers to understand the text;
— present to the responsible international/European committee any
enquiries on the interpretation, or proposals for change, and keep the UK
interests informed;
— monitor related international and European developments and
promulgate them in the UK.
Cross-references
The British Standards which implement international
internat ional or European
publications referred to in this document may be found in the BSI Catalogue
under the section entitled “International Standards Correspondence Index”.
A British Standard does not purport to include all the necessary provisions of
a contract. Users of British Standards are responsible for their correct
application.
Compliance with a British Standard does not of itself
itse lf confer immunity
from legal obligations.
Summary of pages
This document comprises a front cover, an inside front cover, pages i and ii,
the EN title page,
page, pages
pages 2 to 41 and a back cover.
This standard has been updated (see copyright date) and may have had
amendments incorporated. This will be indicated in the amendment table on
the inside front cover.
© BSI 10-1998
National foreword
This British Standard is the English language version of EN 60617-2:1996. It
is identical with IEC 617-2:1996. It supersedes BS 3939-2:1985 which is
withdrawn.
The UK participation in its preparation was entrusted to Technical Committee
GEL/3, Documentation and graphical symbols, which has the responsibility to:
— aid enquirers to understand the text;
— present to the responsible international/European committee any
enquiries on the interpretation, or proposals for change, and keep the UK
interests informed;
— monitor related international and European developments and
promulgate them in the UK.
Cross-references
The British Standards which implement international
internat ional or European
publications referred to in this document may be found in the BSI Catalogue
under the section entitled “International Standards Correspondence Index”.
A British Standard does not purport to include all the necessary provisions of
a contract. Users of British Standards are responsible for their correct
application.
Compliance with a British Standard does not of itself
itse lf confer immunity
from legal obligations.
Summary of pages
This document comprises a front cover, an inside front cover, pages i and ii,
the EN title page,
page, pages
pages 2 to 41 and a back cover.
This standard has been updated (see copyright date) and may have had
amendments incorporated. This will be indicated in the amendment table on
the inside front cover.
© BSI 10-1998
Contents
Page
National foreword Inside front cover
Foreword 2
Text of EN 60417-2 3
© BSI 10-1998 i
ii blank
EUROPEAN STANDARD EN 60617-2
NORME EUROPÉENNE
June 1996
EUROPÄISCHE NORM
ICS 01.080.30
English version
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B-1050 Brussels
© 1996 Copyright reserved to CENELEC members
Ref. No. EN 60617-2:1996 E
EN 60617-2:1996
Foreword Contents
The text of document 3A/380/FDIS, future edition 2 Page
of IEC 617-2, prepared by SC 3A, Graphical symbols Foreword 2
for diagrams, of IEC TC 3, Documentation and
graphical symbols, was submitted to the Introduction 3
IEC/CENELEC parallel vote and was approved by Chapter I: Symbol elements
CENELEC as EN 60617-2 on 1996-03-05. Section 1 Outlines and enclosures 4
The following dates were fixed: Chapter II: Qualifying symbols
– latest date by which the Section 2 Kind of current and voltage 6
EN has to be implemented Section 3 Adjustability, variability and
at national level by automatic control 9
publication of an identical Section 4 Direction of force or motion 11
national standard or by
Section 5 Direction of flow 13
endorsement (dop) 1997-02-01
Section 6 Operational dependence on a
– latest date by which the characteristic quantity 14
national standards
conflicting with the EN Section 7 Types of material 15
have to be withdrawn (dow) 1997-02-01 Section 8 Effect or dependence 16
Section 9 Radiation 17
Endorsement notice Section 10 Signal waveforms 19
The text of the International Standard Section 11 Printing, perforating and
IEC 617-2:1996 was approved by CENELEC as a facsimile 20
European Standard without any modification.
Chapter III: Other symbols having general
application
Section 12 Mechanical and other
controls 21
Section 13 Actuators, Set 1 24
Section 14 Actuators, Set 2 27
Section 15 Earth and frame connections,
equipotentiality 28
Section 16 Ideal circuit elements 29
Section 17 Miscellaneous 30
Annex A (informative) Older symbols 32
Annex B (informative) French alphabetic
index 33
Annex C (informative) English
alphabetic index 37
2 © BSI 10-1998
EN 60617-2:1996
© BSI 10-1998 3
4 E
N
Chapitre I: Éléments de symboles Chapter I: Symbol elements 6
0
6
Section 1 — Cadres et enveloppes Section 1 — Outlines and enclosures 1
7
-2
No. Symbole Symbol Légende Description :
1
02-01-01 Forme 1 Objet, par exemple: Object, for example: 9
9
Form 1 — Equipement — Equipment 6
— Dispositif — Device
— Unité fonctionnelle — Functional unit
— Composant — Component
— Fonction — Function
02-01-02 Forme 2 Des symboles ou légendes appropriés doivent être Suitable symbols or legends shall be inserted in or added
Form 2 portés dans le symbole ou inscrits près de son cadre to the symbol outline to indicate the type of object.
pour préciser le type de l’objet.
02-01-03 Forme 3 Un contour d’une autre forme peut être utilisé si la An outline of another shape may be used if l ayout
Form 3 présentation l’exige. demands it.
©
B
S
I
1
0
-1
9
9
8
©
B No. Symbole Symbol Légende Description
S
I
1 02-01-06 Séparation Boundary
0
-1 Le symbole est utilisé pour indiquer la séparation The symbol is used to indicate a boundary of a group of
9
9
8
d’un groupe de constituants associés physiquement, objects associated physically, mechanically or
mécaniquement ou fonctionnellement. functionally.
N’importe quelle combinaison de traits courts et Any combination of short and long strokes may also be
longs peut aussi être utilisée. used.
02-01-07 Ecran Screen
Blindage Shield
Par exemple pour réduire la pénétration de champs For example for reducing penetration of electric or
électriques ou électromagnétiques. electromagnetic fields.
Toute forme convenable peut être utilisée pour le The symbol may be drawn in any convenient shape.
symbole.
02-01-08 Protection contre le contact direct non intentionnel, Protection against unintentional direct contact, general
symbole général. symbol.
L’astérisque doit être remplacé par le(s) symbole(s) The asterisk shall be replaced by the symbol(s) for an
de l’équipement ou du disposif protégé contre le equipment or device protected against unintentional
contact direct non intentionnel. direct contact.
200%
E
N
6
0
6
1
7
-2
:
1
9
9
5 6
©
B No. Symbole Symbol Légende Description
S
I
1 02-01-06 Séparation Boundary
0
-1 Le symbole est utilisé pour indiquer la séparation The symbol is used to indicate a boundary of a group of
9
9
8
d’un groupe de constituants associés physiquement, objects associated physically, mechanically or
mécaniquement ou fonctionnellement. functionally.
N’importe quelle combinaison de traits courts et Any combination of short and long strokes may also be
longs peut aussi être utilisée. used.
02-01-07 Ecran Screen
Blindage Shield
Par exemple pour réduire la pénétration de champs For example for reducing penetration of electric or
électriques ou électromagnétiques. electromagnetic fields.
Toute forme convenable peut être utilisée pour le The symbol may be drawn in any convenient shape.
symbole.
02-01-08 Protection contre le contact direct non intentionnel, Protection against unintentional direct contact, general
symbole général. symbol.
L’astérisque doit être remplacé par le(s) symbole(s) The asterisk shall be replaced by the symbol(s) for an
de l’équipement ou du disposif protégé contre le equipment or device protected against unintentional
contact direct non intentionnel. direct contact.
200%
E
N
6
0
6
1
7
-2
:
1
9
9
5 6
6 E
N
Chapitre II: Symboles distinctifs Chapter II: Qualifying symbols 6
0
6
Section 2 — Nature du courant et de la tension Section 2 — Kind of current and voltage 1
7
-2
No. Symbole Symbol Légende Description
:
1
02-02-01 supprimé Transferé à Annexe A: 02-A1-01 Transferred to Annex A: 02-A1-01 9
deleted 9
6
02-02-02 supprimé Transferé à Annexe A: 02-A1-02 Transferred to Annex A: 02-A1-02
deleted
©
B
S
I
1
0
-1
9
9
8
6 E
N
Chapitre II: Symboles distinctifs Chapter II: Qualifying symbols 6
0
6
Section 2 — Nature du courant et de la tension Section 2 — Kind of current and voltage 1
7
-2
No. Symbole Symbol Légende Description
:
1
02-02-01 supprimé Transferé à Annexe A: 02-A1-01 Transferred to Annex A: 02-A1-01 9
deleted 9
6
02-02-02 supprimé Transferé à Annexe A: 02-A1-02 Transferred to Annex A: 02-A1-02
deleted
©
B
S
I
1
0
-1
9
9
8
©
B No. Symbole Symbol Légende Description
S
I 02-02-07 EXEMPLE: EXAMPLE:
1
0
-1 Courant alternatif triphasé avec neutre, 400 V (230 V Alternating current: three-phase with
9 entre chaque phase et le neutre), 50 Hz. (voir aussi neutral, 400 V (230 V between phase and neutral), 50 Hz.
9
8 CEI 1293) (seealso IEC 1293)
S’il est nécessaire d’indiquer un système conformément If it is necessary to indicate a system in accordance with the
aux désignations établies dans la CEI 364-3 la designations established in IEC 364-3 the corresponding
désignation appropriée doit être ajoutée. designation shall be added to the symbol.
02-02-08 EXEMPLE: EXAMPLE:
Courant alternatif, triphasé, 50 Hz; système ayant un Alternating current, three-phase, 50 Hz; system having one
point relié à la terre et conducteur neutre et conducteur point directly earthed and separate neutral and protective
de protection séparés dans l’ensemble conductors throughout
Courant alternatif, différentes bandes de fréquences Alternating current, different frequency ranges
Les symboles suivants peuvent être utilisés lorsqu’il The following symbols may be used when it is necessary on
faut, dans un même schéma, distinguer les différentes a given drawing to distinguish between the different
bandes de fréquences, par exemple. frequency ranges, for example.
02-02-09 Fréquences relativement basses (fréquences Relatively low frequencies (power frequencies or sub-audio
industrielles, fréquences infra-acoustiques) frequencies)
02-02-11 Fréquences relativement hautes (fréquences Relatively high frequencies (super audio, carrier and radio
supraacoustiques, fréquences porteuses, fréquences frequencies)
radioélectriques)
02-02-12 Courant redressé avec composante alternative (s’il est Rectified current with alternating component (if it is
nécessaire de le distinguer d’un courant redressé et necessary to distinguish from a rectified and filtered
filtré) current)
E
N
6
0
6
1
7
-2
:
1
9
9
7 6
©
B No. Symbole Symbol Légende Description
S
I 02-02-07 EXEMPLE: EXAMPLE:
1
0
-1 Courant alternatif triphasé avec neutre, 400 V (230 V Alternating current: three-phase with
9 entre chaque phase et le neutre), 50 Hz. (voir aussi neutral, 400 V (230 V between phase and neutral), 50 Hz.
9
8 CEI 1293) (seealso IEC 1293)
S’il est nécessaire d’indiquer un système conformément If it is necessary to indicate a system in accordance with the
aux désignations établies dans la CEI 364-3 la designations established in IEC 364-3 the corresponding
désignation appropriée doit être ajoutée. designation shall be added to the symbol.
02-02-08 EXEMPLE: EXAMPLE:
Courant alternatif, triphasé, 50 Hz; système ayant un Alternating current, three-phase, 50 Hz; system having one
point relié à la terre et conducteur neutre et conducteur point directly earthed and separate neutral and protective
de protection séparés dans l’ensemble conductors throughout
Courant alternatif, différentes bandes de fréquences Alternating current, different frequency ranges
Les symboles suivants peuvent être utilisés lorsqu’il The following symbols may be used when it is necessary on
faut, dans un même schéma, distinguer les différentes a given drawing to distinguish between the different
bandes de fréquences, par exemple. frequency ranges, for example.
02-02-09 Fréquences relativement basses (fréquences Relatively low frequencies (power frequencies or sub-audio
industrielles, fréquences infra-acoustiques) frequencies)
02-02-11 Fréquences relativement hautes (fréquences Relatively high frequencies (super audio, carrier and radio
supraacoustiques, fréquences porteuses, fréquences frequencies)
radioélectriques)
02-02-12 Courant redressé avec composante alternative (s’il est Rectified current with alternating component (if it is
nécessaire de le distinguer d’un courant redressé et necessary to distinguish from a rectified and filtered
filtré) current)
E
N
6
0
6
1
7
-2
:
1
9
9
7 6
8 E
No. Symbole Symbol Légende Description N
02-02-13 + Polarité positive Positive polarity 6
0
6
1
02-02-14 – Polarité négative Negative polarity 7
-2
:
1
9
02-02-15 N Neutre Neutral 9
6
Ce symbole pour conducteur neutre est donné par la This symbol for neutral is given in IEC 445.
CEI 445.
©
B
S
I
1
0
-1
9
9
8
8 E
No. Symbole Symbol Légende Description N
02-02-13 + Polarité positive Positive polarity 6
0
6
1
02-02-14 – Polarité négative Negative polarity 7
-2
:
1
9
02-02-15 N Neutre Neutral 9
6
Ce symbole pour conducteur neutre est donné par la This symbol for neutral is given in IEC 445.
CEI 445.
©
B
S
I
1
0
-1
9
9
8
©
B
S
I
1
0
Section 3 — Ajustabilité, variabilité et régulation Section 3 — Adjustability, variability and automatic
-1
9
9
automatique control
8
3.1 L’ajustabilité est une sorte de variabilité extrinsèque qui permet d’accomplir un 3.1 Adjustability is a kind of non-inherent variability which enables to perform an
ajustement, c’est à dire de fixer la grandeur variable à la valeur convenable. adjustment, i.e. to set the variable quantity on a suitable value.
3.2 La variabilité est extrinsèque quand la valeur de la grandeur variable est réglée 3.2 Variability is non-inherent when the variable quantity is controlled by an external
par un dispositif extérieur, par exemple quand la valeur d’une résistance est device, for example, when the resistance is controlled by a regulator.
contrôlée par un régulateur.
3.3 La variabilité est intrinsèque quand la valeur de la grandeur variable dépend des 3.3 Variability is inherent when the variable quantity depends on qualities of the
propriétés du dispositif lui-même, par exemple quand la valeur d’une résistance device itself, for example, when the resistance changes as a function of voltage or
varie en fonction de la tension ou de la température. of temperature.
3.4 II convient que le symbole d’ajustabilité de variabilité soit dessiné sur le symbole 3.4 The sign for adjustabillity and variability should be drawn across the main symbol
de l’élément et sous un angle de 45° environ par rapport à l’axe principal de ce at about 45° to the centre line of the latter symbol.
dernier.
E
N
6
0
6
1
7
-2
:
1
9
9
9 6
©
B
S
I
1
0
Section 3 — Ajustabilité, variabilité et régulation Section 3 — Adjustability, variability and automatic
-1
9
9
automatique control
8
3.1 L’ajustabilité est une sorte de variabilité extrinsèque qui permet d’accomplir un 3.1 Adjustability is a kind of non-inherent variability which enables to perform an
ajustement, c’est à dire de fixer la grandeur variable à la valeur convenable. adjustment, i.e. to set the variable quantity on a suitable value.
3.2 La variabilité est extrinsèque quand la valeur de la grandeur variable est réglée 3.2 Variability is non-inherent when the variable quantity is controlled by an external
par un dispositif extérieur, par exemple quand la valeur d’une résistance est device, for example, when the resistance is controlled by a regulator.
contrôlée par un régulateur.
3.3 La variabilité est intrinsèque quand la valeur de la grandeur variable dépend des 3.3 Variability is inherent when the variable quantity depends on qualities of the
propriétés du dispositif lui-même, par exemple quand la valeur d’une résistance device itself, for example, when the resistance changes as a function of voltage or
varie en fonction de la tension ou de la température. of temperature.
3.4 II convient que le symbole d’ajustabilité de variabilité soit dessiné sur le symbole 3.4 The sign for adjustabillity and variability should be drawn across the main symbol
de l’élément et sous un angle de 45° environ par rapport à l’axe principal de ce at about 45° to the centre line of the latter symbol.
dernier.
E
N
6
0
6
1
7
-2
:
1
9
9
9 6
1 E
0 No. Symbole Symbol Légende Description N
02-03-05 Ajustement prédéterminé Pre-set adjustability 6
0
Des indications concernant les conditions dans Information on the conditions under which 6
lesquelles l’ajustement est autorisé peuvent être adjustibility is permitted may be shown adjacent to 1
figurées à côté du symbole. the symbol. 7
-2
02-03-06 EXEMPLE: EXAMPLE: :
1
L’ajustement prédéterminé est autorisé seulement à Pre-set adjustment permitted only at zero current 9
9
courant nul 6
©
B
S
I
1
0
-1
9
9
8
1 E
0 No. Symbole Symbol Légende Description N
02-03-05 Ajustement prédéterminé Pre-set adjustability 6
0
Des indications concernant les conditions dans Information on the conditions under which 6
lesquelles l’ajustement est autorisé peuvent être adjustibility is permitted may be shown adjacent to 1
figurées à côté du symbole. the symbol. 7
-2
02-03-06 EXEMPLE: EXAMPLE: :
1
L’ajustement prédéterminé est autorisé seulement à Pre-set adjustment permitted only at zero current 9
9
courant nul 6
©
B
S
I
1
0
-1
9
9
8
©
B
S
I
1
0
Section 4 — Sens de l’effort ou du mouvement Section 4 — Direction of force or motion
-1
9
9
4.1 Une flèche indique le sens dans lequel la partie mobile du dispositif doit se 4.1 An arrow may be used to indicate the direction in which the movable part of a
8 déplacer pour obtenir l’effet désiré (voir l’exemple du symbole 02-04-02). device shall move to give a required effect (see the example of symbol 02-04-02).
Cette flèche peut aussi préciser la direction de l’effort ou le sens du mouvement de It may also indicate the direction of a force or the direction of motion of the
l’organe physique symbolisé. Dans ce cas, une note précisant la position relative physical part symbolized. In such cases a note to indicate the view point may be
conventionnelle de l’observateur peut être nécessaire. required.
4.2 L’effet consécutif au mouvement peut être explicité par des symboles ou par un 4.2 The effect caused by movement may be explained by symbols or by a text.
texte.
E
N
6
0
6
1
7
-2
:
1
9
1 9
1 6
©
B
S
I
1
0
Section 4 — Sens de l’effort ou du mouvement Section 4 — Direction of force or motion
-1
9
9
4.1 Une flèche indique le sens dans lequel la partie mobile du dispositif doit se 4.1 An arrow may be used to indicate the direction in which the movable part of a
8 déplacer pour obtenir l’effet désiré (voir l’exemple du symbole 02-04-02). device shall move to give a required effect (see the example of symbol 02-04-02).
Cette flèche peut aussi préciser la direction de l’effort ou le sens du mouvement de It may also indicate the direction of a force or the direction of motion of the
l’organe physique symbolisé. Dans ce cas, une note précisant la position relative physical part symbolized. In such cases a note to indicate the view point may be
conventionnelle de l’observateur peut être nécessaire. required.
4.2 L’effet consécutif au mouvement peut être explicité par des symboles ou par un 4.2 The effect caused by movement may be explained by symbols or by a text.
texte.
E
N
6
0
6
1
7
-2
:
1
9
1 9
1 6
1 E
2 No. Symbole Symbol Légende Description N
02-04-04 Mouvement circulaire bidirectionnel Bidirectional circular motion 6
Rotation bidirectionnelle Bidirectional rotation 0
6
Couple bidirectionnel Bidirectional torque 1
7
-2
02-04-05 Mouvement circulaire bidirectionnel Bidirectional circular motion
:
1
Rotation bidirectionnelle Bidirectional rotation 9
9
Couple bidirectionnel Bidirectional torque 6
limité(e) dans les deux sens. limited in both directions.
©
B
S
I
1
0
-1
9
9
8
1 E
2 No. Symbole Symbol Légende Description N
02-04-04 Mouvement circulaire bidirectionnel Bidirectional circular motion 6
Rotation bidirectionnelle Bidirectional rotation 0
6
Couple bidirectionnel Bidirectional torque 1
7
-2
02-04-05 Mouvement circulaire bidirectionnel Bidirectional circular motion
:
1
Rotation bidirectionnelle Bidirectional rotation 9
9
Couple bidirectionnel Bidirectional torque 6
limité(e) dans les deux sens. limited in both directions.
©
B
S
I
1
0
-1
9
9
8
©
B
S
I
1
0
Section 5 — Sens de propagation Section 5 — Direction of flow
-1
9
9
8
No. Symbole Symbol Légende Description
02-05-01 Propagation dans un seul sens Propagation, one way
Ecoulement dans un seul sens Flow, one way
par exemple d’énergie, d’un signal, d’information for example of energy, signal, information.
02-05-02 Propagations simultanées dans les deux sens Propagation, both ways, simultaneously
Emission et réception simultanées Simultaneous transmission and reception
02-05-03 Propagations non simultanées dans les deux sens Propagation, both ways, not simultaneously
Emission et réception alternées Alternate transmission and reception
02-05-07 Transit de l’énergie vers les barres Energy flow towards the busbars
02-05-08 Transit de l’énergie dans les deux sens Bidirectional energy flow
E
N
6
0
6
1
7
-2
:
1
9
1 9
3 6
©
B
S
I
1
0
Section 5 — Sens de propagation Section 5 — Direction of flow
-1
9
9
8
No. Symbole Symbol Légende Description
02-05-01 Propagation dans un seul sens Propagation, one way
Ecoulement dans un seul sens Flow, one way
par exemple d’énergie, d’un signal, d’information for example of energy, signal, information.
02-05-02 Propagations simultanées dans les deux sens Propagation, both ways, simultaneously
Emission et réception simultanées Simultaneous transmission and reception
02-05-03 Propagations non simultanées dans les deux sens Propagation, both ways, not simultaneously
Emission et réception alternées Alternate transmission and reception
02-05-07 Transit de l’énergie vers les barres Energy flow towards the busbars
02-05-08 Transit de l’énergie dans les deux sens Bidirectional energy flow
E
N
6
0
6
1
7
-2
:
1
9
1 9
3 6
1 E
4 N
Section 6 — Fonctionnement dépendant d’une Section 6 — Operational dependence on a 6
0
grandeur caractéristique characteristic quantity 6
1
7
No. Symbole Symbol Légende Description -2
:
1
02-06-01 > Actionné lorsque la grandeur caractéristique dép asse Actuating when the characteristic quantity is higher 9
la valeur d’ajustement. than the setting value. 9
6
Voir aussi ISO/CEI 646. See also ISO/IEC 646.
02-06-02 < Actionné lorsque la grandeur caractéristique desce nd Actuating when the characteristic quantity is lower
en dessous de la valeur d’ajustement. than the setting value.
Voir aussi ISO/CEI 646. See also ISO/IEC 646.
02-06-03 > Actionné lorsque la grandeur caractéristique, soit Actuating when the characteristic quantity is either
< dépasse une valeur d’ajustement haute, soit descend higher than a given high setting or lower than a given
en dessous d’une valeur d’ajustement basse. low setting.
02-06-04 =0 Actionné lorsque la grandeur caractéristique est égale Actuating when the value of the characteristic
à zéro. quantity is equal to zero.
02-06-05 Actionné lorsque la grandeur caractéristique est égale Actuating when the value of the characteristic
approximativement à zéro. quantity is approximately equal to zero.
©
B
S
I
1
0
-1
9
9
8
1 E
4 N
Section 6 — Fonctionnement dépendant d’une Section 6 — Operational dependence on a 6
0
grandeur caractéristique characteristic quantity 6
1
7
No. Symbole Symbol Légende Description -2
:
1
02-06-01 > Actionné lorsque la grandeur caractéristique dép asse Actuating when the characteristic quantity is higher 9
la valeur d’ajustement. than the setting value. 9
6
Voir aussi ISO/CEI 646. See also ISO/IEC 646.
02-06-02 < Actionné lorsque la grandeur caractéristique desce nd Actuating when the characteristic quantity is lower
en dessous de la valeur d’ajustement. than the setting value.
Voir aussi ISO/CEI 646. See also ISO/IEC 646.
02-06-03 > Actionné lorsque la grandeur caractéristique, soit Actuating when the characteristic quantity is either
< dépasse une valeur d’ajustement haute, soit descend higher than a given high setting or lower than a given
en dessous d’une valeur d’ajustement basse. low setting.
02-06-04 =0 Actionné lorsque la grandeur caractéristique est égale Actuating when the value of the characteristic
à zéro. quantity is equal to zero.
02-06-05 Actionné lorsque la grandeur caractéristique est égale Actuating when the value of the characteristic
approximativement à zéro. quantity is approximately equal to zero.
©
B
S
I
1
0
-1
9
9
8
©
B
S
I
1
0
Section 7 — Types de matière Section 7 — Types of material
-1
9
9
7.1 Le type de matière peut être indiqué en utilisant soit son symbole chimique, soit 7.1 The type of material may be indicated either by using its chemical symbol, or by
8 un des symboles distinctifs ci-après. Ces symboles sont ici dessinés dans un one of the qualifying symbols given below. These symbols have been drawn in
rectangle; celui-ci est supprimé lorsqu’ils sont utilisés avec un autre symbole. Si rectangles, but the rectangle may be omitted when they are used in conjunction
nécessaire, les symboles des matières données par ISO 128 peuvent être utilisés. with another symbol. If necessary, use may be made of the symbols for materials
given in ISO 128.
E
N
6
0
6
1
7
-2
:
1
9
1 9
5 6
©
B
S
I
1
0
Section 7 — Types de matière Section 7 — Types of material
-1
9
9
7.1 Le type de matière peut être indiqué en utilisant soit son symbole chimique, soit 7.1 The type of material may be indicated either by using its chemical symbol, or by
8 un des symboles distinctifs ci-après. Ces symboles sont ici dessinés dans un one of the qualifying symbols given below. These symbols have been drawn in
rectangle; celui-ci est supprimé lorsqu’ils sont utilisés avec un autre symbole. Si rectangles, but the rectangle may be omitted when they are used in conjunction
nécessaire, les symboles des matières données par ISO 128 peuvent être utilisés. with another symbol. If necessary, use may be made of the symbols for materials
given in ISO 128.
E
N
6
0
6
1
7
-2
:
1
9
1 9
5 6
1 E
6 N
Section 8 — Effet ou dépendance Section 8 — Effect or dependence 6
0
6
No. Symbole Symbol Légende Description 1
7
02-08-01 Effet thermique Thermal effect -2
:
1
9
9
02-08-02 Effet électromagnétique Electromagnetic effect 6
02-08-07 Effet de couplage avec séparation électrique Coupling effect with electrical separation
©
B
S
I
1
0
-1
9
9
8
1 E
6 N
Section 8 — Effet ou dépendance Section 8 — Effect or dependence 6
0
6
No. Symbole Symbol Légende Description 1
7
02-08-01 Effet thermique Thermal effect -2
:
1
9
9
02-08-02 Effet électromagnétique Electromagnetic effect 6
02-08-07 Effet de couplage avec séparation électrique Coupling effect with electrical separation
©
B
S
I
1
0
-1
9
9
8
©
B
S
I
1
0
Section 9 — Rayonnement Section 9 — Radiation
-1
9
9
9.1 Des flèches dirigées vers le symbole d’un dispositif indiquent que ce dispositif 9.1 Arrows pointing towards a symbol denote that the device symbolized will respond
8 réagit à un rayonnement incident du type indiqué. to incident radiation of the indicated type.
9.2 Des flèches partant du symbole d’un dispositif indiquent qu’un rayonnement du 9.2 Arrows pointing away from a symbol denote the emission of the indicated type of
type indiqué est émis par le dispositif. radiation by the device symbolized.
9.3 Des flèches placées à l’intérieur du symbole d’un dispositif indiquent que ce 9.3 Arrows located within a symbol denote an internal radiation source.
dispositif contient une source interne de rayonnement.
Si un objectif est représenté et non une source déterminée, If there is a target but no specific source shown,
les flèches doivent être orientées vers le bas et à droite. the arrows shall point downwards and to the
right.
Si aucun objectif spécifique n’est représenté, les flèches If there is no specific target shown, the arrows
doivent être orientées vers le haut et à droite. shall point upwards and to the right.
Si un objectif est représenté et non une source déterminée, If there is a target but no specific source shown,
les flèches doivent être orientées vers le bas et à droite. the arrows shall point downwards and to the
right.
Si aucun objectif spécifique n’est représenté, les flèches If there is no specific target shown, the arrows
doivent être orientées vers le haut et à droite. shall point upwards and to the right.
1 E
8 No. Symbole Symbol Légende Description N
02-09-03 Rayonnement ionisant Radiation, ionizing 6
0
S’il est nécessaire d’indiquer le type de rayonnement If it is necessary to show the specific type of 6
ionisant, le symbole peut être complété par des symbole s ou ionizing radiation, the symbol may be 1
des lettres tels que: augmented by the addition of symbols or letters 7
-2
such as the following:
α = particule alpha :
1
β = particule bêta α = alpha particle 9
γ = rayons gamma β = beta particle 9
γ = gamma rays
6
δ = deutéron
A = proton δ = deuteron
η = neutron A = proton
π = méson pi, pion η = neutron
χ = méson K, kaon π = p ion
µ = méson µ, muon χ = K meson
X = rayo ns X µ = muon
X = X-ray
02-09-05 Rayonnement cohérent, non ionisant, bidirectionnel Coherent radiation, non-ionizing, bidirectional
©
B
S
I
1
0
-1
9
9
8
1 E
8 No. Symbole Symbol Légende Description N
02-09-03 Rayonnement ionisant Radiation, ionizing 6
0
S’il est nécessaire d’indiquer le type de rayonnement If it is necessary to show the specific type of 6
ionisant, le symbole peut être complété par des symbole s ou ionizing radiation, the symbol may be 1
des lettres tels que: augmented by the addition of symbols or letters 7
-2
such as the following:
α = particule alpha :
1
β = particule bêta α = alpha particle 9
γ = rayons gamma β = beta particle 9
= gamma rays
6
δ = deutéron γ
A = proton δ = deuteron
η = neutron A = proton
π = méson pi, pion η = neutron
χ = méson K, kaon π = p ion
µ = méson µ, muon χ = K meson
X = rayo ns X µ = muon
X = X-ray
02-09-05 Rayonnement cohérent, non ionisant, bidirectionnel Coherent radiation, non-ionizing, bidirectional
©
B
S
I
1
0
-1
9
9
8
©
B
S
I
1
0
Section 10 — Forme des signaux Section 10 — Signal waveforms
-1
9
9
10.1 Chaque symbol e rep ré se nte une forme id éal isée du si gnal. 10.1 Each symbol rep rese nts an ide al ize d shape of the wavefo rm.
8
E
N
6
0
6
1
7
-2
:
1
9
1 9
9 6
©
B
S
I
1
0
Section 10 — Forme des signaux Section 10 — Signal waveforms
-1
9
9
10.1 Chaque symbol e rep ré se nte une forme id éal isée du si gnal. 10.1 Each symbol rep rese nts an ide al ize d shape of the wavefo rm.
8
E
N
6
0
6
1
7
-2
:
1
9
1 9
9 6
2 E
0 N
Section 11 — Impression, perforation, télécopie Section 11 — Printing, perforating and facsimile 6
0
6
No. Symbole Symbol Légende Description 1
7
02-11-01 Impression sur bande Tape printing -2
:
1
9
9
6
02-11-02 Perforation de bande ou utilisation de bande perforée Tape perforating or using perforated tape
02-11-03 Impression et perforation simultanées sur la même Simultaneous printing and perforating of one tape
bande
©
B
S
I
1
0
-1
9
9
8
2 E
0 N
Section 11 — Impression, perforation, télécopie Section 11 — Printing, perforating and facsimile 6
0
6
No. Symbole Symbol Légende Description 1
7
02-11-01 Impression sur bande Tape printing -2
:
1
9
9
6
02-11-02 Perforation de bande ou utilisation de bande perforée Tape perforating or using perforated tape
02-11-03 Impression et perforation simultanées sur la même Simultaneous printing and perforating of one tape
bande
©
B
S
I
1
0
-1
9
9
8
©
B
S
I
1
0
Chapitre III: Autres symboles d’application Chapter III: Other symbols having general
-1
9
9
générale application
8
Section 12 — Commandes mécaniques at autres Section 12 — Mechanical and other controls
No. Symbole Symbol Légende Description
02-12-01 Forme 1 Liaison, par exemple: Link, for example:
Form 1 — mécanique — mechanical
— pneumatique — pneumatic
— hydraulique — hydraulic
— optique — optical
— fonctionnelle — functional
La longeur du symbole de liaison peut être ajustée á la The length of the link symbol may be adjusted to the
présentation du schéma. layout of the diagram.
02-12-02 EXEMPLES: EXAMPLES:
Liaison mécanique avec indication du sens de l’effort ou Mechanical link with indication of direction of force
du mouvement de translation. or motion.
02-12-03 Liaison mécanique avec indication du sens du Mechanical link with indication of direction of
mouvement de rotation. rotation.
La flèche est supposée placée devant le symbole de la The arrow is assumed to be placed in front of the link
liaison mécanique. symbol.
Forme 2
02-12-04 Form 2 Ce symbole est employé si l’espace disponible est trop This symbol is to be used if the space is too restricted
faible pour que l’on puisse utiliser le symbole 02-12-01. to permit the use of symbol 02-12-01.
02-12-05 Forme 1 Action retardée Delayed action
Form 1 L’action est retardée quand le sens du déplacement est Action is delayed when the di rection of movement is
de l’arc vers son centre. from the arc towards its centre.
02-12-06 Forme 2
Form 2
E
N
6
0
6
1
7
-2
:
1
9
2 9
1 6
©
B
S
I
1
0
Chapitre III: Autres symboles d’application Chapter III: Other symbols having general
-1
9
9
générale application
8
Section 12 — Commandes mécaniques at autres Section 12 — Mechanical and other controls
No. Symbole Symbol Légende Description
02-12-01 Forme 1 Liaison, par exemple: Link, for example:
Form 1 — mécanique — mechanical
— pneumatique — pneumatic
— hydraulique — hydraulic
— optique — optical
— fonctionnelle — functional
La longeur du symbole de liaison peut être ajustée á la The length of the link symbol may be adjusted to the
présentation du schéma. layout of the diagram.
02-12-02 EXEMPLES: EXAMPLES:
Liaison mécanique avec indication du sens de l’effort ou Mechanical link with indication of direction of force
du mouvement de translation. or motion.
02-12-03 Liaison mécanique avec indication du sens du Mechanical link with indication of direction of
mouvement de rotation. rotation.
La flèche est supposée placée devant le symbole de la The arrow is assumed to be placed in front of the link
liaison mécanique. symbol.
Forme 2
02-12-04 Form 2 Ce symbole est employé si l’espace disponible est trop This symbol is to be used if the space is too restricted
faible pour que l’on puisse utiliser le symbole 02-12-01. to permit the use of symbol 02-12-01.
02-12-05 Forme 1 Action retardée Delayed action
Form 1 L’action est retardée quand le sens du déplacement est Action is delayed when the di rection of movement is
de l’arc vers son centre. from the arc towards its centre.
02-12-06 Forme 2
Form 2
E
N
6
0
6
1
7
-2
:
1
9
2 9
1 6
2 E
2 No. Symbole Symbol Légende Description N
02-12-08 Crantage Detent 6
Retour non automatique Non-automatic return 0
6
Dispositif de maintien dans une position donnée Device for maintaining a given position 1
7
-2
02-12-09 Crantage, libéré Detent, disengaged :
1
9
9
6
02-12-10 Crantage, engagé Detent, engaged
02-12-11 Verrouillage mécanique entre deux appareils Mechanical interlock between two devices
©
B
S
I
1
0
-1
9
9
8
2 E
2 No. Symbole Symbol Légende Description N
02-12-08 Crantage Detent 6
Retour non automatique Non-automatic return 0
6
Dispositif de maintien dans une position donnée Device for maintaining a given position 1
7
-2
02-12-09 Crantage, libéré Detent, disengaged :
1
9
9
6
02-12-10 Crantage, engagé Detent, engaged
02-12-11 Verrouillage mécanique entre deux appareils Mechanical interlock between two devices
©
B
S
I
1
0
-1
9
9
8
©
B No. Symbole Symbol Légende Description
S
I
1 02-12-18 Accouplement mécanique embrayé Mechanical coupling, engaged
0
-1
9
9
8
02-12-19 EXEMPLE: EXAMPLE:
Accouplement à entraînement dans un seul sens Unidirectional coupling device for rotation
Roue libre Free wheel
02-12-20 Frein Brake
02-12-22 Moteur électrique avec frein desserré. Electric motor with brake released.
E
N
6
0
6
1
7
-2
:
1
9
2 9
3 6
©
B No. Symbole Symbol Légende Description
S
I
1 02-12-18 Accouplement mécanique embrayé Mechanical coupling, engaged
0
-1
9
9
8
02-12-19 EXEMPLE: EXAMPLE:
Accouplement à entraînement dans un seul sens Unidirectional coupling device for rotation
Roue libre Free wheel
02-12-20 Frein Brake
02-12-22 Moteur électrique avec frein desserré. Electric motor with brake released.
E
N
6
0
6
1
7
-2
:
1
9
2 9
3 6
2 E
4 N
Section 13 — Actionneurs, ensemble 1 Section 13 — Actuators, set 1 6
0
Les symboles dans cette section représentent des actionneurs qui sont commandés par des The symbols in this section represent actuators which are operated by different kinds 6
1
forces externes de sortes différentes. of external force. 7
-2
No. Symbole Symbol Légende Description :
1
9
02-13-01 Actionneur manuel, symbole général Manual actuator, general symbol 9
6
02-13-02 Actionneur manuel protégé contre une opération Manual actuator protected against unintentional
non intentionnelle operation
02-13-08 Actionneur d’urgence, type “coup de poing” Emergency actuator, type “mushroom-head”
©
B
S
I
1
0
-1
9
9
8
2 E
4 N
Section 13 — Actionneurs, ensemble 1 Section 13 — Actuators, set 1 6
0
Les symboles dans cette section représentent des actionneurs qui sont commandés par des The symbols in this section represent actuators which are operated by different kinds 6
1
forces externes de sortes différentes. of external force. 7
-2
No. Symbole Symbol Légende Description :
1
9
02-13-01 Actionneur manuel, symbole général Manual actuator, general symbol 9
6
02-13-02 Actionneur manuel protégé contre une opération Manual actuator protected against unintentional
non intentionnelle operation
02-13-08 Actionneur d’urgence, type “coup de poing” Emergency actuator, type “mushroom-head”
©
B
S
I
1
0
-1
9
9
8
©
B No. Symbole Symbol Légende Description
S
I
1 02-13-10 Commande par pédale Operated by pedal
0
-1
9
9
8 02-13-11 Commande par levier Operated by lever
02-13-20 Commande par accumulation d’énergie mécanique Operated by stored mechanical energy E
Un repère inscrit dans le carré permet, si Information showing the form of stored energy may be N
nécessaire, de spécifier le mode d’accumulation. added in the square. 6
0
6
1
7
-2
:
1
9
2 9
5 6
©
B No. Symbole Symbol Légende Description
S
I
1 02-13-10 Commande par pédale Operated by pedal
0
-1
9
9
8 02-13-11 Commande par levier Operated by lever
02-13-20 Commande par accumulation d’énergie mécanique Operated by stored mechanical energy E
Un repère inscrit dans le carré permet, si Information showing the form of stored energy may be N
nécessaire, de spécifier le mode d’accumulation. added in the square. 6
0
6
1
7
-2
:
1
9
2 9
5 6
2 E
6 No. Symbole Symbol Légende Description N
02-13-21 Actionné par énergie hydraulique ou Actuated by pneumatic or hydraulic power, single acting 6
pneumatique, à simple effet 0
6
1
7
-2
02-13-22 Actionné par énergie hydraulique ou Actuated by pneumatic or hydraulic power, doubl e acting :
1
pneumatique, à double effet 9
9
6
02-13-24 Actionné par un dispositif électromagnétique, par Actuated by electromagnetic device, for example for
exemple pour protection centre une surintensité protection against overcurrent
02-13-25 Actionné par un dispositif thermique, par exemple Actuated by thermal device, for example for protec tion
pour protection contre une surintensité against overcurrent
©
B
S
I
1
0
-1
9
9
8
2 E
6 No. Symbole Symbol Légende Description N
02-13-21 Actionné par énergie hydraulique ou Actuated by pneumatic or hydraulic power, single acting 6
pneumatique, à simple effet 0
6
1
7
-2
02-13-22 Actionné par énergie hydraulique ou Actuated by pneumatic or hydraulic power, doubl e acting :
1
pneumatique, à double effet 9
9
6
02-13-24 Actionné par un dispositif électromagnétique, par Actuated by electromagnetic device, for example for
exemple pour protection centre une surintensité protection against overcurrent
02-13-25 Actionné par un dispositif thermique, par exemple Actuated by thermal device, for example for protec tion
pour protection contre une surintensité against overcurrent
©
B
S
I
1
0
-1
9
9
8
©
B
S
I
1
0
Section 14 — Actionneurs, ensemble 2 Section 14 — Actuators, set 2
-1
9
9
Les symboles dans cette section représentent des actionneurs supplémentaires qui sont The symbols in this section represent additional actuators which are actuated by
8 actionnés par des forces externes de sortes différentes. different kinds of external force.
E
N
6
0
6
1
7
-2
:
1
9
2 9
7 6
©
B
S
I
1
0
Section 14 — Actionneurs, ensemble 2 Section 14 — Actuators, set 2
-1
9
9
Les symboles dans cette section représentent des actionneurs supplémentaires qui sont The symbols in this section represent additional actuators which are actuated by
8 actionnés par des forces externes de sortes différentes. different kinds of external force.
E
N
6
0
6
1
7
-2
:
1
9
2 9
7 6
2 E
8 N
Section 15 — Mises à la terre et à la masse, Section 15 — Earth and frame connections, 6
0
équipotentialité equipotentiality 6
1
7
No. Symbole Symbol Légende Description -2
:
1
02-15-01 Terre, symbole général Earth, general symbol 9
Ground, general symbol 9
6
On peut ajouter des informations relatives à la Supplementary information may be given to define the
catégorie de la terre, ou à son rôle, si cela n’est pas status or the purpose of the earth if this is not readily
évident. apparent.
©
B
S
I
1
0
-1
9
9
8
2 E
8 N
Section 15 — Mises à la terre et à la masse, Section 15 — Earth and frame connections, 6
0
équipotentialité equipotentiality 6
1
7
No. Symbole Symbol Légende Description -2
:
1
02-15-01 Terre, symbole général Earth, general symbol 9
Ground, general symbol 9
6
On peut ajouter des informations relatives à la Supplementary information may be given to define the
catégorie de la terre, ou à son rôle, si cela n’est pas status or the purpose of the earth if this is not readily
évident. apparent.
©
B
S
I
1
0
-1
9
9
8
©
B
S
I
1
0
Section 16 — Éléments idéaux de circuit Section 16 — Ideal circuit elements
-1
9
9
16.1 Des indications peuvent être ajoutées aux symboles 02-16-01 à 02-16-03 selon la 16.1 Additional indications may be added to the symbols 02-16-01 to 02-16-03
8 CEI 375. according to IEC 375.
E
N
6
0
6
1
7
-2
:
1
9
2 9
9 6
©
B
S
I
1
0
Section 16 — Éléments idéaux de circuit Section 16 — Ideal circuit elements
-1
9
9
16.1 Des indications peuvent être ajoutées aux symboles 02-16-01 à 02-16-03 selon la 16.1 Additional indications may be added to the symbols 02-16-01 to 02-16-03
8 CEI 375. according to IEC 375.
E
N
6
0
6
1
7
-2
:
1
9
2 9
9 6
3 E
0 N
Section 17 — Divers Section 17 — Miscellaneous 6
0
6
No. Symbole Symbol Légende Description 1
7
-2
02-17-01 Défaut Fault
(marquage de l’emplacement supposé d’un défaut) (indication of assumed fault location) :
1
9
9
6
02-17-02 Défaut d’isolement (par contoumement, perforation, Flashover
claquage, etc.) Break-through
02-17-04 Contact mobile (par exemple glissant) Movable (for example sliding) contact
02-17-06 Convertisseur, symbole général, par exemple: Converter, general symbol, for example:
Convertisseur de l’énergie Power converter
Convertisseur d’un signal Signal converter
Convertisseur de mesure Measuring transducer
Si le sens de conversion n’est pas évident, il peut être If the direction of change is not obvious, it may be
indiqué par une flèche sur un des côtés du symbole. indicated by an arrowhead on the outline of the symbol.
Un symbole de grandeur, forme d’onde, etc., en A symbol or legend indicating the input or o utput
entrée ou sortie peut être placé dans chacune des quantity, waveform etc. may be inserted in each half of
parties du symbole général pour indiquer la nature the general symbol to show the nature of the conversion.
de la conversion.
Pour exemples voir CEI 617-6 et CEI 617-10. For examples see IEC 617-6 and IEC 617-10.
©
B
S
I
1
0
-1
9
9
8
3 E
0 N
Section 17 — Divers Section 17 — Miscellaneous 6
0
6
No. Symbole Symbol Légende Description 1
7
-2
02-17-01 Défaut Fault
(marquage de l’emplacement supposé d’un défaut) (indication of assumed fault location) :
1
9
9
6
02-17-02 Défaut d’isolement (par contoumement, perforation, Flashover
claquage, etc.) Break-through
02-17-04 Contact mobile (par exemple glissant) Movable (for example sliding) contact
02-17-06 Convertisseur, symbole général, par exemple: Converter, general symbol, for example:
Convertisseur de l’énergie Power converter
Convertisseur d’un signal Signal converter
Convertisseur de mesure Measuring transducer
Si le sens de conversion n’est pas évident, il peut être If the direction of change is not obvious, it may be
indiqué par une flèche sur un des côtés du symbole. indicated by an arrowhead on the outline of the symbol.
Un symbole de grandeur, forme d’onde, etc., en A symbol or legend indicating the input or o utput
entrée ou sortie peut être placé dans chacune des quantity, waveform etc. may be inserted in each half of
parties du symbole général pour indiquer la nature the general symbol to show the nature of the conversion.
de la conversion.
Pour exemples voir CEI 617-6 et CEI 617-10. For examples see IEC 617-6 and IEC 617-10.
©
B
S
I
1
0
-1
9
9
8
©
B No. Symbole Symbol Légende Description
S
I
1 02-17-06A Conversion Conversion
0
-1
9
9
8
E
N
6
0
6
1
7
-2
:
1
9
3 9
1 6
©
B No. Symbole Symbol Légende Description
S
I
1 02-17-06A Conversion Conversion
0
-1
9
9
8
E
N
6
0
6
1
7
-2
:
1
9
3 9
1 6
3 E
2 N
Annexe A (informative) Anciens symboles Annex A (informative) Older symbols 6
0
6
Cette annexe contient une sélection de symboles normalisés dans la CEI 617-2 (1983) This annex contains symbols standardized in IEC 617-2 (1983), which are now deleted. 1
qui sont maintenant supprimés. Ces symboles figurent ici seulement afin de faciliter la They are shown here for information purposes only to facilitate the comprehension of 7
compréhension des schémas anciens. older diagrams. -2
(Dans cette annexe, les numéros de la publication de 1983 sont mis entre parenthèses.) (In this annex the numbering from 1983-edition is quoted in parentheses.) :
1
9
A1 — Nature du courant et de la tension A1 — Kind of current and voltage 9
6
No. Symbole Symbol Légende Description
02-A1-01 Courant continu Direct current
La valeur de la tension peut être inscrite à droite et le type The voltage may be indicated at the right of the symbol
de réseau à gauche du symbole. and the type of system at the left.
(02-02-01)
02-A1-02 2M – 220/110 V EXEMPLE: EXAMPLE:
(02-02-02) Courant continu, trois conducteurs dont un conducteur Direct current, three conductors including
médian, 220 V (110 V entre chaque conducteur e xtrême et le mid-wire, 220 V (110 V between each outer conductor
médian) and mid-wire)
2M peut être remplacé par 2 + M 2M may be replaced by 2 + M
©
B
S
I
1
0
-1
9
9
8
3 E
2 N
Annexe A (informative) Anciens symboles Annex A (informative) Older symbols 6
0
6
Cette annexe contient une sélection de symboles normalisés dans la CEI 617-2 (1983) This annex contains symbols standardized in IEC 617-2 (1983), which are now deleted. 1
qui sont maintenant supprimés. Ces symboles figurent ici seulement afin de faciliter la They are shown here for information purposes only to facilitate the comprehension of 7
compréhension des schémas anciens. older diagrams. -2
(Dans cette annexe, les numéros de la publication de 1983 sont mis entre parenthèses.) (In this annex the numbering from 1983-edition is quoted in parentheses.) :
1
9
A1 — Nature du courant et de la tension A1 — Kind of current and voltage 9
6
No. Symbole Symbol Légende Description
02-A1-01 Courant continu Direct current
La valeur de la tension peut être inscrite à droite et le type The voltage may be indicated at the right of the symbol
de réseau à gauche du symbole. and the type of system at the left.
(02-02-01)
02-A1-02 2M – 220/110 V EXEMPLE: EXAMPLE:
(02-02-02) Courant continu, trois conducteurs dont un conducteur Direct current, three conductors including
médian, 220 V (110 V entre chaque conducteur e xtrême et le mid-wire, 220 V (110 V between each outer conductor
médian) and mid-wire)
2M peut être remplacé par 2 + M 2M may be replaced by 2 + M
©
B
S
I
1
0
-1
9
9
8
©
B
S
I
1 Annexe B (informative) Annex B (informative)
0
-1
9
Index alphabétique en français French alphabetic index
9
8 Accouplement mécanique 02-12-16 Bande, impression 02-11-01
Accouplement mécanique débrayé 02-12-17 Bandes de fréquences, courant alternatif 02-02-09
Accouplement mécanique embrayé 02-12-18 Bidirectionnel, effort ou mouvement 02-04-02
Accrochage engagé 02-12-13 Blindage 02-01-07
Accrochage libéré 02-12-12 Blocage 02-12-14
Accumulation d’énergie mécanique, commande par 02-13-20 Blocage engagé 02-12-15
Action par échelons 02-03-07 Cadre et enveloppe 02-01-01
Action retardée 02-12-05 Cadres et enveloppes (éléments de symboles) Cuve 02-01-04
Actionné par comptage 02-14-02 Came (commande par) 02-13-16
Actionné par effet électromagnétique 02-13-23 Champ magnétique (Effet ou dépendance) 02-08-04
Actionné par énergie hydraulique ou pneumatique, Châssis 02-15-04
à double effet 02-13-22 Clavier 02-11-05
Actionné par énergie hydraulique ou pneumatique, Clef, commande par 02-13-13
à simple effet 02-13-21 Commande – Methodes de, hydraulique à double effet 02-13-22
Actionné par humidité relative 02-14-05 Commande manuelle amovible 02-13-12
Actionné par le débit d’un fluide 02-14-03 Commande mécanique avec accouplement mécanique 02-12-16
Actionné par le débit d’un gaz 02-14-04 Commande mécanique avec accouplement
Actionné par le niveau d’un liquide 02-14-01 mécanique débrayé 02-12-17
Actionné par rapport à une valeur d’ajustement, Commande mécanique avec accouplement
symbole distinctif 02-06-00 mécanique embrayé 02-12-18
Actionné par un dispositif électromagnétique 02-13-24 Commande mécanique avec crantage engagé 02-12-10
Actionné par un dispositif thermique 02-13-25 Commande mécanique avec dispositif d’accrochage
Actionné selon une grandeur caractéristique, libéré 02-12-12
symbole distinctif 02-06-00 Commande mécanique avec dispositif de blocage 02-12-14
Actionneur à semiconducteur 02-13-28 Commande mécanique avec dispositif de blocage,
Actionneur d’urgence, type «coup de poing» 02-13-08 engagé 02-12-15
Actionneur manuel protégé 02-13-02 Commande mécanique avec embrayage 02-12-16
Actionneur manuel, symbol général 02-13-01 Commande mécanique avec retour automatique 02-12-07
Aimant permanent 02-17-03 Commande mécanique avec retour non automatique 02-12-08
Ajustabilité pas à pas 02-03-08 Commande mécanique avec verrouillage mécanique 02-12-11
Ajustabilité non linéaire 02-03-02 Commande mécanique dispositif d’accrochage engagé 02-12-13
Ajustabilité, symbole général 02-03-01 Commande mécanique et autres 02-12-00 E
Ajustement prédéterminé 02-03-05 Commande par accumulation d’énergie mécanique 02-13-20 N
Alternées, émission et réception 02-05-03 Commande par came 02-13-16 6
Amovible, commande manuelle 02-13-12 Commande par clef 02-13-13 0
6
Ampoule 02-01-04 Commande par effet de proximité 02-13-06 1
7
Analogique, symbole distinctif 02-17-08 Commande par effleurement 02-13-07 -2
Bande perforée 02-11-02 Commande par galet 02-13-15 :
1
Bande perforée, impression et perforation simultanées 02-11-03 Commande par horloge électrique 02-13-27 9
3 Commande par levier 02-13-11 9
3 6
©
B
S
I
1 Annexe B (informative) Annex B (informative)
0
-1
9
Index alphabétique en français French alphabetic index
9
8 Accouplement mécanique 02-12-16 Bande, impression 02-11-01
Accouplement mécanique débrayé 02-12-17 Bandes de fréquences, courant alternatif 02-02-09
Accouplement mécanique embrayé 02-12-18 Bidirectionnel, effort ou mouvement 02-04-02
Accrochage engagé 02-12-13 Blindage 02-01-07
Accrochage libéré 02-12-12 Blocage 02-12-14
Accumulation d’énergie mécanique, commande par 02-13-20 Blocage engagé 02-12-15
Action par échelons 02-03-07 Cadre et enveloppe 02-01-01
Action retardée 02-12-05 Cadres et enveloppes (éléments de symboles) Cuve 02-01-04
Actionné par comptage 02-14-02 Came (commande par) 02-13-16
Actionné par effet électromagnétique 02-13-23 Champ magnétique (Effet ou dépendance) 02-08-04
Actionné par énergie hydraulique ou pneumatique, Châssis 02-15-04
à double effet 02-13-22 Clavier 02-11-05
Actionné par énergie hydraulique ou pneumatique, Clef, commande par 02-13-13
à simple effet 02-13-21 Commande – Methodes de, hydraulique à double effet 02-13-22
Actionné par humidité relative 02-14-05 Commande manuelle amovible 02-13-12
Actionné par le débit d’un fluide 02-14-03 Commande mécanique avec accouplement mécanique 02-12-16
Actionné par le débit d’un gaz 02-14-04 Commande mécanique avec accouplement
Actionné par le niveau d’un liquide 02-14-01 mécanique débrayé 02-12-17
Actionné par rapport à une valeur d’ajustement, Commande mécanique avec accouplement
symbole distinctif 02-06-00 mécanique embrayé 02-12-18
Actionné par un dispositif électromagnétique 02-13-24 Commande mécanique avec crantage engagé 02-12-10
Actionné par un dispositif thermique 02-13-25 Commande mécanique avec dispositif d’accrochage
Actionné selon une grandeur caractéristique, libéré 02-12-12
symbole distinctif 02-06-00 Commande mécanique avec dispositif de blocage 02-12-14
Actionneur à semiconducteur 02-13-28 Commande mécanique avec dispositif de blocage,
Actionneur d’urgence, type «coup de poing» 02-13-08 engagé 02-12-15
Actionneur manuel protégé 02-13-02 Commande mécanique avec embrayage 02-12-16
Actionneur manuel, symbol général 02-13-01 Commande mécanique avec retour automatique 02-12-07
Aimant permanent 02-17-03 Commande mécanique avec retour non automatique 02-12-08
Ajustabilité pas à pas 02-03-08 Commande mécanique avec verrouillage mécanique 02-12-11
Ajustabilité non linéaire 02-03-02 Commande mécanique dispositif d’accrochage engagé 02-12-13
Ajustabilité, symbole général 02-03-01 Commande mécanique et autres 02-12-00 E
Ajustement prédéterminé 02-03-05 Commande par accumulation d’énergie mécanique 02-13-20 N
Alternées, émission et réception 02-05-03 Commande par came 02-13-16 6
Amovible, commande manuelle 02-13-12 Commande par clef 02-13-13 0
6
Ampoule 02-01-04 Commande par effet de proximité 02-13-06 1
7
Analogique, symbole distinctif 02-17-08 Commande par effleurement 02-13-07 -2
Bande perforée 02-11-02 Commande par galet 02-13-15 :
1
Bande perforée, impression et perforation simultanées 02-11-03 Commande par horloge électrique 02-13-27 9
3 Commande par levier 02-13-11 9
3 6
3 E
4 Commande par manivelle 02-13-14 Dispositif de blocage engagé 02-12-15 N
Commande par moteur électrique 02-13-26 Dispositif de maintien dans une position donnée 02-12-08 6
Commande par pédale 02-13-10 Dispositif électromagnetique, actionné par 02-13-24 0
Commande par poussoir 02-13-05 Dispositif thermique, actionné par 02-13-25 6
1
Commande par tirette 02-13-03 Echelons, action par 02-03-07 7
-2
Commande par volant 02-13-09 Ecoulement (énergie, signal, information) 02-04-01 :
Commande rotative 02-13-04 Ecoulement dans un seul sens 02-05-01 1
9
Commane mécanique avec crantage libéré 02-12-09 Ecran 02-01-07 9
Composant (cadre et enveloppe) 02-01-01 Effet de couplage avec séparation électrique 02-08-07 6
Composante alternative, courant redressé 02-02-12 Effet de proximité, commande par 02-13-06
Comptage, commande par 02-14-01 Effet électromagnétique 02-08-02
Conducteur médian 02-02-16 Effet électromagnétique, actionné par 02-13-23
Conducteur neutre 02-02-15 Effet magnétostrictif 02-08-03
Contact direct, protection contre 02-01-08 Effet ou dépendance de champ magnétique 02-08-04
Contact mobile (par exemple glissant) 02-17-04 Effet semiconducteur 02-08-06
Contour 02-01-04 Effet thermique 02-08-01
Contrôle automatique de gain 02-03-12 Efflemement, commande par 02-13-07
Conversion 02-17-06A Effort bidirectionnel 02-04-02
Convertisseur, symbole général 02-17-06 Effort unidirectionel 02-04-01
Coup de poing, actionneur d’urgence 02-13-08 Electret (matière) 02-07-05
Couplage avec séparation électrique 02-08-07 Electromagnétique, effet 02-08-02
Couple bidirectionnel 02-04-04 Embrayage 02-12-16
Couple bidirectionnel limité 02-04-05 Emission 02-05-04
Couple unidirectionnel 02-04-03 Emission et réception alternées 02-05-03
Courant alternatif 02-02-04 Emission et réception simultanées 02-05-02
Courant alternatif, différentes bandes de fréquences 02-02-09 Emplacement supposé d’un défaut 02-17-01
Courant continu 02-02-03 Enceinte 02-01-04
Courant redressé 02-02-12 Energie (propagation, sens) 02-05-01
Courant, source idéale de 02-16-01 Energie hydraulique ou pneumatique, actionné par 02-13-21
Crantage 02-12-08 Engrenage 02-12-23
Crantage, engagé 02-12-10 Enveloppe 02-01-04
Crantage, libéré 02-12-09 Equipement (cadre et enveloppe) 02-01-01
Cuve 02-01-04 Equipotentialité 02-15-05
Débit d’un fluide, commande par 02-14-03 Fonction (élément de symbole) 02-01-01
Défaut (marquage de l’emplacement supposé Fonction échelon négative 02-10-05
d’un défaut) 02-17-01 Fonction échelon positive 02-10-04
Défaut d’isolement 02-17-02 Fonctionelle, liaison 02-12-01
Dents de scie, signal 02-10-06 Fonctionnement dépendant d’une grandeur
Dépendance du champ magnétique 02-08-04 caractéristique, symbole distinctif 02-06-00
©
B
Diélectrique (matiére) 02-07-07 Frein 02-12-20
S
I
Dispositif (cadre et enveloppe) 02-01-01 Fréquences, bande de, courant alternatif 02-02-09
1
0
Dispositif d’accrochage engagé 02-12-13 Galet, commande par 02-13-15
-1
9
Dispositif d’accrochage libéré 02-12-12 Gaz, commande par débit de 02-14-04
9
8 Dispositif de blocage 02-12-14 Gazeuse (matiére) 02-07-04
3 E
4 Commande par manivelle 02-13-14 Dispositif de blocage engagé 02-12-15 N
Commande par moteur électrique 02-13-26 Dispositif de maintien dans une position donnée 02-12-08 6
Commande par pédale 02-13-10 Dispositif électromagnetique, actionné par 02-13-24 0
Commande par poussoir 02-13-05 Dispositif thermique, actionné par 02-13-25 6
1
Commande par tirette 02-13-03 Echelons, action par 02-03-07 7
-2
Commande par volant 02-13-09 Ecoulement (énergie, signal, information) 02-04-01 :
Commande rotative 02-13-04 Ecoulement dans un seul sens 02-05-01 1
9
Commane mécanique avec crantage libéré 02-12-09 Ecran 02-01-07 9
Composant (cadre et enveloppe) 02-01-01 Effet de couplage avec séparation électrique 02-08-07 6
Composante alternative, courant redressé 02-02-12 Effet de proximité, commande par 02-13-06
Comptage, commande par 02-14-01 Effet électromagnétique 02-08-02
Conducteur médian 02-02-16 Effet électromagnétique, actionné par 02-13-23
Conducteur neutre 02-02-15 Effet magnétostrictif 02-08-03
Contact direct, protection contre 02-01-08 Effet ou dépendance de champ magnétique 02-08-04
Contact mobile (par exemple glissant) 02-17-04 Effet semiconducteur 02-08-06
Contour 02-01-04 Effet thermique 02-08-01
Contrôle automatique de gain 02-03-12 Efflemement, commande par 02-13-07
Conversion 02-17-06A Effort bidirectionnel 02-04-02
Convertisseur, symbole général 02-17-06 Effort unidirectionel 02-04-01
Coup de poing, actionneur d’urgence 02-13-08 Electret (matière) 02-07-05
Couplage avec séparation électrique 02-08-07 Electromagnétique, effet 02-08-02
Couple bidirectionnel 02-04-04 Embrayage 02-12-16
Couple bidirectionnel limité 02-04-05 Emission 02-05-04
Couple unidirectionnel 02-04-03 Emission et réception alternées 02-05-03
Courant alternatif 02-02-04 Emission et réception simultanées 02-05-02
Courant alternatif, différentes bandes de fréquences 02-02-09 Emplacement supposé d’un défaut 02-17-01
Courant continu 02-02-03 Enceinte 02-01-04
Courant redressé 02-02-12 Energie (propagation, sens) 02-05-01
Courant, source idéale de 02-16-01 Energie hydraulique ou pneumatique, actionné par 02-13-21
Crantage 02-12-08 Engrenage 02-12-23
Crantage, engagé 02-12-10 Enveloppe 02-01-04
Crantage, libéré 02-12-09 Equipement (cadre et enveloppe) 02-01-01
Cuve 02-01-04 Equipotentialité 02-15-05
Débit d’un fluide, commande par 02-14-03 Fonction (élément de symbole) 02-01-01
Défaut (marquage de l’emplacement supposé Fonction échelon négative 02-10-05
d’un défaut) 02-17-01 Fonction échelon positive 02-10-04
Défaut d’isolement 02-17-02 Fonctionelle, liaison 02-12-01
Dents de scie, signal 02-10-06 Fonctionnement dépendant d’une grandeur
Dépendance du champ magnétique 02-08-04 caractéristique, symbole distinctif 02-06-00
©
B
Diélectrique (matiére) 02-07-07 Frein 02-12-20
S
I
Dispositif (cadre et enveloppe) 02-01-01 Fréquences, bande de, courant alternatif 02-02-09
1
0
Dispositif d’accrochage engagé 02-12-13 Galet, commande par 02-13-15
-1
9
Dispositif d’accrochage libéré 02-12-12 Gaz, commande par débit de 02-14-04
9
8 Dispositif de blocage 02-12-14 Gazeuse (matiére) 02-07-04
©
B Gyrateur idéal 02-16-03 Mouvement rectilinéaire bidirectionnel 02-04-02
S
I Horloge électrique, commande par 02-13-27 Mouvement rectilinéaire unidirectionnel 02-04-01
1
0
-1
Humidité relative, actionné par 02-14-05 Négatif (courant, tension) 02-02-14
9
9
Hydraulique, liaison 02-12-01 Neutre (symbol distinctif) 02-02-15
8 Impression et perforation simultanées sur la Niveau d’un liquide, commande par 02-14-01
même bande 02-11-03 Non linéaire, ajustabilité 02-03-02
Impression sur bande 02-11-01 Non linéaire, variabilité intrinsèque 02-03-04
Impression sur page 02-11-04 Non-simultanées, propagation 02-05-03
Impulsion de courant alternatif 02-10-03 Numérique, symbole distinctif 02-17-09
Impulsion négative 02-10-02 Objet (élément de symbole) 02-01-01
Impulsion positive 02-10-01 Onde en dents de scie 02-10-06
Indicateur de point de contrôle 02-17-05 Ondes radioélectriques, rayonnement 02-09-01
Information (propagation,sens) 02-05-01 Optique, liaison 02-12-01
Isolant ou diélectrique (matière) 02-07-07 Orientation du rayonnement 02-09-01
Isolement (défaut) 02-17-02 Oscillant, effort ou mouvement 02-04-06
Levier, commande par 02-13-11 Page, impression 02-11-04
Liaison hydraulique, mécanique, pneumatique 02-12-01 Pas à pas, ajustabilité 02-03-08
Liaison optique, fonctionnelle 02-12-01 Pédale, commande par 02-13-10
Liaison, symbole général 02-12-01 Perforation de bande 02-11-02
Liaison, symbole pour faible espase disponible 02-12-04 Perforation et Impression simultanées, bande 02-11-03
Ligne de séparation 02-01-06 Pneumatique, liaison 02-12-01
Liquide (matière) 02-07-03 Point de contrôle, indicateur 02-17-05
Lumière cohérente 02-09-02 Polarité négative 02-02-14
Lumière visible, rayonnement 02-09-01 Polarité positive 02-02-13
Magnétostrictif (effet) 02-08-03 Positif (courant, tension) 02-02-13
Maintien dans une position (Dispositif) 02-12-08 Poussoir, commande par 02-13-05
Manivelle, commande par 02-13-14 Prédéterminé, ajustement 02-03-05
Masse 02-15-04 Profil d’un dispositif linéaire 02-13-18
Matière gazeuse 02-07-04 Profil de came 02-13-17
Matière liquide 02-07-03 Propagation (énergie, signal, information) 02-05-01
Matière non spécifiée 02-07-01 Propagation dans un seul sens 02-05-01
Matière solide 02-07-02 Propagation, énergie dans les deux sens 02-05-08
Matière, electret 02-07-05 Propagation, énergie vers les barres 02-05-07
Matière, isolant ou diélectrique 02-07-07 Propagation, sens de émission 02-05-04
Matière, semiconducteur 02-07-06 Propagation, sens de réception 02-05-05
Mécanique, liaison 02-12-01 Propagation, sens de transit de l’énergie issue des barres 02-05-06 E
N
Mécaniques commandes 02-12-00 Propagations non simultanées dans les deux sens 02-05-03
Médian (symbole distinctif) 02-02-16 Propagations simultanées dans les deux sens 02-05-02 6
0
Mise à la terre et à la masse 02-15-00 Protection contre, actionneur manuel 02-13-02 6
Moteur électrique, commande par 02-13-26 Protection, contact direct 02-01-08 1
7
Mouvement circulaire bidirectionnel 02-04-04 Protection, symbole général 02-01-07 -2
Mouvement circulaire bidirectionnel limité 02-04-05 Protection, terre de 02-15-03 :
1
Mouvement circulaire unidirectionel 02-04-03 Radar, rayonnement 02-09-04 9
3 9
5 Mouvement oscillant 02-04-06 Rayonnement cohérent, non ionisant 02-09-02 6
©
B Gyrateur idéal 02-16-03 Mouvement rectilinéaire bidirectionnel 02-04-02
S
I Horloge électrique, commande par 02-13-27 Mouvement rectilinéaire unidirectionnel 02-04-01
1
0
-1
Humidité relative, actionné par 02-14-05 Négatif (courant, tension) 02-02-14
9
9
Hydraulique, liaison 02-12-01 Neutre (symbol distinctif) 02-02-15
8 Impression et perforation simultanées sur la Niveau d’un liquide, commande par 02-14-01
même bande 02-11-03 Non linéaire, ajustabilité 02-03-02
Impression sur bande 02-11-01 Non linéaire, variabilité intrinsèque 02-03-04
Impression sur page 02-11-04 Non-simultanées, propagation 02-05-03
Impulsion de courant alternatif 02-10-03 Numérique, symbole distinctif 02-17-09
Impulsion négative 02-10-02 Objet (élément de symbole) 02-01-01
Impulsion positive 02-10-01 Onde en dents de scie 02-10-06
Indicateur de point de contrôle 02-17-05 Ondes radioélectriques, rayonnement 02-09-01
Information (propagation,sens) 02-05-01 Optique, liaison 02-12-01
Isolant ou diélectrique (matière) 02-07-07 Orientation du rayonnement 02-09-01
Isolement (défaut) 02-17-02 Oscillant, effort ou mouvement 02-04-06
Levier, commande par 02-13-11 Page, impression 02-11-04
Liaison hydraulique, mécanique, pneumatique 02-12-01 Pas à pas, ajustabilité 02-03-08
Liaison optique, fonctionnelle 02-12-01 Pédale, commande par 02-13-10
Liaison, symbole général 02-12-01 Perforation de bande 02-11-02
Liaison, symbole pour faible espase disponible 02-12-04 Perforation et Impression simultanées, bande 02-11-03
Ligne de séparation 02-01-06 Pneumatique, liaison 02-12-01
Liquide (matière) 02-07-03 Point de contrôle, indicateur 02-17-05
Lumière cohérente 02-09-02 Polarité négative 02-02-14
Lumière visible, rayonnement 02-09-01 Polarité positive 02-02-13
Magnétostrictif (effet) 02-08-03 Positif (courant, tension) 02-02-13
Maintien dans une position (Dispositif) 02-12-08 Poussoir, commande par 02-13-05
Manivelle, commande par 02-13-14 Prédéterminé, ajustement 02-03-05
Masse 02-15-04 Profil d’un dispositif linéaire 02-13-18
Matière gazeuse 02-07-04 Profil de came 02-13-17
Matière liquide 02-07-03 Propagation (énergie, signal, information) 02-05-01
Matière non spécifiée 02-07-01 Propagation dans un seul sens 02-05-01
Matière solide 02-07-02 Propagation, énergie dans les deux sens 02-05-08
Matière, electret 02-07-05 Propagation, énergie vers les barres 02-05-07
Matière, isolant ou diélectrique 02-07-07 Propagation, sens de émission 02-05-04
Matière, semiconducteur 02-07-06 Propagation, sens de réception 02-05-05
Mécanique, liaison 02-12-01 Propagation, sens de transit de l’énergie issue des barres 02-05-06 E
N
Mécaniques commandes 02-12-00 Propagations non simultanées dans les deux sens 02-05-03
Médian (symbole distinctif) 02-02-16 Propagations simultanées dans les deux sens 02-05-02 6
0
Mise à la terre et à la masse 02-15-00 Protection contre, actionneur manuel 02-13-02 6
Moteur électrique, commande par 02-13-26 Protection, contact direct 02-01-08 1
7
Mouvement circulaire bidirectionnel 02-04-04 Protection, symbole général 02-01-07 -2
Mouvement circulaire bidirectionnel limité 02-04-05 Protection, terre de 02-15-03 :
1
Mouvement circulaire unidirectionel 02-04-03 Radar, rayonnement 02-09-04 9
3 9
5 Mouvement oscillant 02-04-06 Rayonnement cohérent, non ionisant 02-09-02 6
3 E
6 Rayonnement cohérent, non ionisant, bidirectionnel 02-09-05 Transit de l’énergie dans les deux sens 02-05-08 N
Rayonnement électromagnétique non ionisant 02-09-01 Transit de l’énergie issue des barres 02-05-06 6
Rayonnement électromagnétique, non ionisant, Transit de l’énergie vers les barres 02-05-07 0
bidirectionnel 02-09-04 Translation 02-04-01 6
1
Rayonnement ionisant 02-09-03 Type de rayonnement ionisant 02-09-03 7
-2
Réception 02-05-05 Unidirectionnel, effort ou mouvement 02-04-01 :
Régulation automatique 02-03-11 Unité fonctionnelle 02-01-01 1
9
Retour automatique 02-12-07 Utilisation de bande perforée 02-11-02 9
Retour non automatique 02-12-08 Valeur, courant alternatif 02-02-04 6
Rotation bidirectionnelle 02-04-04 Valeur, courant continu 02-02-03
Rotation bidirectionnelle limitée 02-04-05 Variabilité continue 02-03-09
Rotation unidirectionnelle 02-04-03 Variabilité extrinséque 02-03-00
Rotation, commande par 02-13-04 Variabilité intrinsèque, non linéaire 02-03-04
Sans bruit, terre 02-15-02 Variabilité intrinsèque, symbole général 02-03-03
Semiconducteur (effet) 02-08-06 Variabilité ajustement prédéterminé 02-03-05
Semiconducteur (matière) 02-07-06 Verrouillage mécanique entre deux appareils 02-12-11
Sens de l’énergie issue des barres 02-05-06 Volant, commande par 02-13-09
Sens de l’énergie vers les barres 02-05-07
Sens de propagation, émission 02-05-04
Sens de propagation, réception 02-05-05
Séparation 02-01-06
Séparation électrique, effet de couplage 02-08-04
Signal (propagation, sens) 02-05-01
Signal, fonction échelon négative 02-10-05
Signal, fonction échelon positive 02-10-04
Signal, impulsion de courant alternatif 02-10-03
Signal, impulsion négative 02-10-02
Signal, impulsion positive 02-10-01
Signal, onde en dents de scie 02-10-06
Signaux analogiques (Identification) 02-17-08
Signaux numérique (identification) 02-17-09
Simultanées, émission et réception 02-05-02
Simultanées, propagations 02-05-02
Solide (matiére) 02-07-02
Source idéale de courant 02-16-01
Source idéale de tension 02-16-02
Télécopie 02-11-06
Temporisation 02-08-05
Tension, source idéale de 02-16-02
©
B
Terre de protection 02-15-03
S
I
Terre sans bruit 02-15-02
1
0
Terre, symbole général 02-15-01
-1
9
Thermique (effet) 02-08-01
9
8 Tirette, commande par 02-13-03
3 E
6 Rayonnement cohérent, non ionisant, bidirectionnel 02-09-05 Transit de l’énergie dans les deux sens 02-05-08 N
Rayonnement électromagnétique non ionisant 02-09-01 Transit de l’énergie issue des barres 02-05-06 6
Rayonnement électromagnétique, non ionisant, Transit de l’énergie vers les barres 02-05-07 0
bidirectionnel 02-09-04 Translation 02-04-01 6
1
Rayonnement ionisant 02-09-03 Type de rayonnement ionisant 02-09-03 7
-2
Réception 02-05-05 Unidirectionnel, effort ou mouvement 02-04-01 :
Régulation automatique 02-03-11 Unité fonctionnelle 02-01-01 1
9
Retour automatique 02-12-07 Utilisation de bande perforée 02-11-02 9
Retour non automatique 02-12-08 Valeur, courant alternatif 02-02-04 6
Rotation bidirectionnelle 02-04-04 Valeur, courant continu 02-02-03
Rotation bidirectionnelle limitée 02-04-05 Variabilité continue 02-03-09
Rotation unidirectionnelle 02-04-03 Variabilité extrinséque 02-03-00
Rotation, commande par 02-13-04 Variabilité intrinsèque, non linéaire 02-03-04
Sans bruit, terre 02-15-02 Variabilité intrinsèque, symbole général 02-03-03
Semiconducteur (effet) 02-08-06 Variabilité ajustement prédéterminé 02-03-05
Semiconducteur (matière) 02-07-06 Verrouillage mécanique entre deux appareils 02-12-11
Sens de l’énergie issue des barres 02-05-06 Volant, commande par 02-13-09
Sens de l’énergie vers les barres 02-05-07
Sens de propagation, émission 02-05-04
Sens de propagation, réception 02-05-05
Séparation 02-01-06
Séparation électrique, effet de couplage 02-08-04
Signal (propagation, sens) 02-05-01
Signal, fonction échelon négative 02-10-05
Signal, fonction échelon positive 02-10-04
Signal, impulsion de courant alternatif 02-10-03
Signal, impulsion négative 02-10-02
Signal, impulsion positive 02-10-01
Signal, onde en dents de scie 02-10-06
Signaux analogiques (Identification) 02-17-08
Signaux numérique (identification) 02-17-09
Simultanées, émission et réception 02-05-02
Simultanées, propagations 02-05-02
Solide (matiére) 02-07-02
Source idéale de courant 02-16-01
Source idéale de tension 02-16-02
Télécopie 02-11-06
Temporisation 02-08-05
Tension, source idéale de 02-16-02
©
B
Terre de protection 02-15-03
S
I
Terre sans bruit 02-15-02
1
0
Terre, symbole général 02-15-01
-1
9
Thermique (effet) 02-08-01
9
8 Tirette, commande par 02-13-03
©
B
S
I
1 Annexe C (informative) Annex C (informative)
0
-1
Index alphabétique en anglais English alphabetic index
9
9
8 Action delayed 02-12-05 Bidirectional force 02-04-02
Action in steps 02-03-07 Bidirectional rectilinear motion 02-04-02
Actuated by a counter 02-14-02 Bidirectional torque, limited 02-04-05
Actuated by electromagnetic device 02-13-24 Blocking device 02-12-14
Actuated by electromagnetic effect 02-13-23 Blocking device engaged 02-12-15
Actuated by fluid flow 02-14-03 Boundary line 02-01-06
Actuated by gas flow 02-14-04 Brake 02-12-20
Actuated by liquid level 02-14-01 Break-through 02-17-02
Actuated by pneumatic or hydraulic power, Cam by operation 02-13-16
double acting 02-13-22 Cam profile 02-13-17
Actuated by pneumatic or hydraulic power, Changer(s) 02-17-06
single acting 02-13-21 Chassis(connection) 02-15-04
Actuated by relative humidity 02-14-05 Circuit elements, Ideal ideal current source 02-16-01
Actuated by thermal device 02-13-25 Circuit elements, Ideal ideal gyrator 02-16-03
Actuating when the characteristic quantity is either Circuit elements, Iedeal ideal voltage source 02-16-02
Clock, electric, operated 02-13-27
higher than a given high setting or lower than a Clutch 02-12-16
given low setting 02-06-03 Coherent radiation, non-ionizing, bidirectional 02-09-05
Actuating when the characteristic quantity is higher Coherent radiation, non-ionizing (for example
than the setting value 02-06-00 coherent light) 02-09-02
Actuating when the characteristic quantity is lower Component (symbol element) 02-01-01
than the setting value 02-06-00 Component, outlines and enclosures (Symbol elements) 02-01-01
Actuating when the value of the characteristic Conductor, mid-wire 02-02-16
quantity i s approximately equal to zero 02-06-05 Conductor, neutral 02-02-15
Actuating when value of the characteristic quantity Connections, earth and frame 02-15-00
is equal to zero 02-06-04 Connections, earth and frame 02-15-00
Adjustability 02-03-01 Contact, moving 02-17-04
Adjustability step by step 02-03-08 Continuous variability 02-03-09
Adjustability, non-linear 02-03-02 Control automatic (inherent) 02-03-12
Adjustment, pro-set 02-03-05 Control by non-electrical quantities by a counter 02-14-02
Alternate transmission and reception 02-05-03 Control by non-electrical quantities by flow 02-14-03
Alternating current 02-02-04 Control by non-electrical quantities by fluid level 02-14-01 E
Alternating current, different frequency ranges 02-02-09 Control by non-electrical quantities by number N
Alternating, current and Voltage 02-02-04 of events 02-14-02
Analogue 02-17-08 6
Control by non-electrical quantities by relative 0
Automatic (inherent) control 02-03-11 6
humidity 02-14-05 1
Automatic control 02-03-11 Controls, Mechanical automatic return 02-12-07 7
Automatic return 02-12-07 -2
Controls, Mechanical coupling engaged 02-12-18 :
Bidirectional circular motion 02-04-04 Controls, Mechanical detent 02-12-08 1
Bidirectional circular motion, limited 02-04-05 9
3 Controls, Mechanical detent disengaged 02-12-09 9
7 Bidirectional energy flow 02-05-08 6
©
B
S
I
1 Annexe C (informative) Annex C (informative)
0
-1
Index alphabétique en anglais English alphabetic index
9
9
8 Action delayed 02-12-05 Bidirectional force 02-04-02
Action in steps 02-03-07 Bidirectional rectilinear motion 02-04-02
Actuated by a counter 02-14-02 Bidirectional torque, limited 02-04-05
Actuated by electromagnetic device 02-13-24 Blocking device 02-12-14
Actuated by electromagnetic effect 02-13-23 Blocking device engaged 02-12-15
Actuated by fluid flow 02-14-03 Boundary line 02-01-06
Actuated by gas flow 02-14-04 Brake 02-12-20
Actuated by liquid level 02-14-01 Break-through 02-17-02
Actuated by pneumatic or hydraulic power, Cam by operation 02-13-16
double acting 02-13-22 Cam profile 02-13-17
Actuated by pneumatic or hydraulic power, Changer(s) 02-17-06
single acting 02-13-21 Chassis(connection) 02-15-04
Actuated by relative humidity 02-14-05 Circuit elements, Ideal ideal current source 02-16-01
Actuated by thermal device 02-13-25 Circuit elements, Ideal ideal gyrator 02-16-03
Actuating when the characteristic quantity is either Circuit elements, Iedeal ideal voltage source 02-16-02
Clock, electric, operated 02-13-27
higher than a given high setting or lower than a Clutch 02-12-16
given low setting 02-06-03 Coherent radiation, non-ionizing, bidirectional 02-09-05
Actuating when the characteristic quantity is higher Coherent radiation, non-ionizing (for example
than the setting value 02-06-00 coherent light) 02-09-02
Actuating when the characteristic quantity is lower Component (symbol element) 02-01-01
than the setting value 02-06-00 Component, outlines and enclosures (Symbol elements) 02-01-01
Actuating when the value of the characteristic Conductor, mid-wire 02-02-16
quantity i s approximately equal to zero 02-06-05 Conductor, neutral 02-02-15
Actuating when value of the characteristic quantity Connections, earth and frame 02-15-00
is equal to zero 02-06-04 Connections, earth and frame 02-15-00
Adjustability 02-03-01 Contact, moving 02-17-04
Adjustability step by step 02-03-08 Continuous variability 02-03-09
Adjustability, non-linear 02-03-02 Control automatic (inherent) 02-03-12
Adjustment, pro-set 02-03-05 Control by non-electrical quantities by a counter 02-14-02
Alternate transmission and reception 02-05-03 Control by non-electrical quantities by flow 02-14-03
Alternating current 02-02-04 Control by non-electrical quantities by fluid level 02-14-01 E
Alternating current, different frequency ranges 02-02-09 Control by non-electrical quantities by number N
Alternating, current and Voltage 02-02-04 of events 02-14-02
Analogue 02-17-08 6
Control by non-electrical quantities by relative 0
Automatic (inherent) control 02-03-11 6
humidity 02-14-05 1
Automatic control 02-03-11 Controls, Mechanical automatic return 02-12-07 7
Automatic return 02-12-07 -2
Controls, Mechanical coupling engaged 02-12-18 :
Bidirectional circular motion 02-04-04 Controls, Mechanical detent 02-12-08 1
Bidirectional circular motion, limited 02-04-05 9
3 Controls, Mechanical detent disengaged 02-12-09 9
7 Bidirectional energy flow 02-05-08 6
3 E
8 Controls, Mechanical device blocking 02-12-14 Effect magnetic field 02-08-04 N
Controls, Mechanical device blocking, engaged 02-12-15 Effect magnetostrictive 02-08-03 6
Controls, Mechanical device latching, disengaged 02-12-12 Effect thermal 02-08-01 0
Controls, Mechanical divece latching, engaged 02-12-13 Electret, material 02-07-05 6
1
Controls, Mechanical hydraulic connection (link) 02-12-00 Electric clock, operated by 02-13-27 7
-2
Controls, Mechanical mechanical connection (link) 02-12-01 Electric motor, operated by 02-13-26 :
Controls, Mechanical mechanical coupling 02-12-16 Electrical separation, coupling effect 02-08-07 1
9
Controls, Mechanical mechanical coupling disengaged 02-12-17 Electromagnetic actuator, operation, methods by 02-13-23 9
Controls, Mechanical mechanical interlock 02-12-11 Electromagnetic effect 02-08-02 6
Controls, Mechanical non-automatic return 02-12-08 Electromagnetic effect, actuated by 02-13-23
Controls, Mechanical pneumatic connection (link) 02-12-01 Electromagnetic radiation, non-ionizing 02-09-01
Controls, Mechnical detent engaged 02-12-10 Electromagnetic radiation, non-ionizing 02-09-01
Conversion 02-17-06A Electromagnetic radiation, non-ionizing,
Convert(s) 02-17-06 bidirectional 02-09-04
Counter, actuated 02-14-02 Emergency actuator, type “mushroom-head” 02-13-08
Coupling effect with electrical separation 02-08-07 Emergency swith 02-13-08
Crank by operation 02-13-14 Enclosure (symbol element) 02-01-04
Current and Voltage, alternating 02-02-04 Energy flow from the busbars 02-05-06
Current and Voltage, alternating relatively low Energy flow towards the busbars 02-05-07
frequencies current and voltage alternating 02-02-09 Energy flow, one way 02-05-01
Current and Voltage-Kind of (Qualifying symbols) engaged, latching device, 02-12-13
rectified 02-02-12 Envelope (symbol element) 02-01-04
Current source, ideal 02-16-01 Equipment (symbol element) 02-01-01
Delay 02-08-05 Equipotentiality 02-15-05
Delayed action 02-12-05 Events, number, Control by non-electrical quantities 02-14-02
Dependence magnetic field 02-08-04 Facsimile 02-11-06
Dependence semiconductor 02-08-06 Fault (indication of assumed fault location) 02-17-01
Detent 02-12-08 Flashover 02-17-02
Detent, disengaged 02-12-09 Flow, one way 02-05-01
Detent, engaged 02-12-10 Flow-Direction of alternative transmission
Device (symbol element) 02-01-01 and reception 02-05-03
device blocking 02-12-14 Flow-Direction of bidirectional energy flow 02-05-08
Device for maintaining a given position 02-12-08 Flow-Direction of energy flow from the busbars 02-05-06
Device, outlines and enclosures (Symbol elements) 02-01-01 Flow-Direction of energy flow towards the busbars 02-05-07
Digital 02-17-09 Flow-Direction of propagation, both ways, not
Direct contact, protection against 02-01-08 simultaneously 02-05-03
Direct current 02-02-03 Flow-Direction of propagation, one way 02-05-01
Direct, current and Voltage 02-02-03 Flow-Direction of reception 02-05-05
Disengaged, latching device, 02-12-12 Flow-Direction of signal flow, one way 02-05-01
©
B
Earth 02-15-01 Flow-Direction of simultaneous transmission and
S
I
Earth and frame connections 02-15-00 reception 02-05-02
1
0
Earth and frame connections noiseless 02-15-02 Flow-Direction of transmission 02-05-04
-1
9
Earth and frame connections protective 02-15-03 Fluid flow, actuated 02-14-03
9
8 Effect electromagnetic 02-08-02 Fluid Level, Control by non-electrical quantities 02-14-01
3 E
8 Controls, Mechanical device blocking 02-12-14 Effect magnetic field 02-08-04 N
Controls, Mechanical device blocking, engaged 02-12-15 Effect magnetostrictive 02-08-03 6
Controls, Mechanical device latching, disengaged 02-12-12 Effect thermal 02-08-01 0
Controls, Mechanical divece latching, engaged 02-12-13 Electret, material 02-07-05 6
1
Controls, Mechanical hydraulic connection (link) 02-12-00 Electric clock, operated by 02-13-27 7
-2
Controls, Mechanical mechanical connection (link) 02-12-01 Electric motor, operated by 02-13-26 :
Controls, Mechanical mechanical coupling 02-12-16 Electrical separation, coupling effect 02-08-07 1
9
Controls, Mechanical mechanical coupling disengaged 02-12-17 Electromagnetic actuator, operation, methods by 02-13-23 9
Controls, Mechanical mechanical interlock 02-12-11 Electromagnetic effect 02-08-02 6
Controls, Mechanical non-automatic return 02-12-08 Electromagnetic effect, actuated by 02-13-23
Controls, Mechanical pneumatic connection (link) 02-12-01 Electromagnetic radiation, non-ionizing 02-09-01
Controls, Mechnical detent engaged 02-12-10 Electromagnetic radiation, non-ionizing 02-09-01
Conversion 02-17-06A Electromagnetic radiation, non-ionizing,
Convert(s) 02-17-06 bidirectional 02-09-04
Counter, actuated 02-14-02 Emergency actuator, type “mushroom-head” 02-13-08
Coupling effect with electrical separation 02-08-07 Emergency swith 02-13-08
Crank by operation 02-13-14 Enclosure (symbol element) 02-01-04
Current and Voltage, alternating 02-02-04 Energy flow from the busbars 02-05-06
Current and Voltage, alternating relatively low Energy flow towards the busbars 02-05-07
frequencies current and voltage alternating 02-02-09 Energy flow, one way 02-05-01
Current and Voltage-Kind of (Qualifying symbols) engaged, latching device, 02-12-13
rectified 02-02-12 Envelope (symbol element) 02-01-04
Current source, ideal 02-16-01 Equipment (symbol element) 02-01-01
Delay 02-08-05 Equipotentiality 02-15-05
Delayed action 02-12-05 Events, number, Control by non-electrical quantities 02-14-02
Dependence magnetic field 02-08-04 Facsimile 02-11-06
Dependence semiconductor 02-08-06 Fault (indication of assumed fault location) 02-17-01
Detent 02-12-08 Flashover 02-17-02
Detent, disengaged 02-12-09 Flow, one way 02-05-01
Detent, engaged 02-12-10 Flow-Direction of alternative transmission
Device (symbol element) 02-01-01 and reception 02-05-03
device blocking 02-12-14 Flow-Direction of bidirectional energy flow 02-05-08
Device for maintaining a given position 02-12-08 Flow-Direction of energy flow from the busbars 02-05-06
Device, outlines and enclosures (Symbol elements) 02-01-01 Flow-Direction of energy flow towards the busbars 02-05-07
Digital 02-17-09 Flow-Direction of propagation, both ways, not
Direct contact, protection against 02-01-08 simultaneously 02-05-03
Direct current 02-02-03 Flow-Direction of propagation, one way 02-05-01
Direct, current and Voltage 02-02-03 Flow-Direction of reception 02-05-05
Disengaged, latching device, 02-12-12 Flow-Direction of signal flow, one way 02-05-01
©
B
Earth 02-15-01 Flow-Direction of simultaneous transmission and
S
I
Earth and frame connections 02-15-00 reception 02-05-02
1
0
Earth and frame connections noiseless 02-15-02 Flow-Direction of transmission 02-05-04
-1
9
Earth and frame connections protective 02-15-03 Fluid flow, actuated 02-14-03
9
8 Effect electromagnetic 02-08-02 Fluid Level, Control by non-electrical quantities 02-14-01
©
B Force-Direction of bidirectional 02-04-02 Magnet, permanent 02-17-03
S
I Force-Direction of unidirectional 02-04-01 Magnetic field dependence 02-08-04
1
0
-1
Frame (connection) 02-15-04 Magnetic field effect or dependence 02-08-04
9
9
Function (symbol element) 02-01-01 Magnetic field effet 02-08-04
8 functional link 02-12-01 Magnetostrictive effect 02-08-03
Functional unit (symbol element) 02-01-01 Manual actuator protected against
Functional unit, outlines and enclosures unintentional operation 02-13-02
(Symbol elements) 02-01-01 Manually actuator 02-13-01
Gas flow, actuated 02-14-04 Material, Types of electret 02-07-05
Gas, material 02-07-04 Material, Types of solid 02-07-02
Gearing 02-12-23 Material, gas 02-07-04
Ground 02-15-01 Material, liquid 02-07-03
Ground and frame connection chassis 02-15-04 Material, unspecified 02-07-01
Ground and frame connection frame 02-15-04 Measuring transducer 02-17-06
Ground and frame connections equipotentiality 02-15-05 Mechanical brake 02-12-20
Ground and frame connections noiseless 02-15-02 Mechanical clutch 02-12-16
Ground and frame connections protective 02-15-03 Mechanical coupling 02-12-16
Gyrator, ideal 02-16-03 Mechanical coupling, disengaged 02-12-17
Handwheel operation 02-13-09 Mechanical coupling, engaged 02-12-18
Humidity, relative, actuated 02-14-05 Mechanical hydraulic connection (link), Controls 02-12-00
hydraulic link 02-12-01 Mechanical interlock between two devices 02-12-11
Ideal current source 02-16-01 mechanical link 02-12-01
Ideal gyrator 02-16-03 Mechanical link with indication of direction of
Ideal voltage source 02-16-02 force or motion 02-12-04
Identifier of signals analogue 02-17-08 Medium frequencies (audio) 02-02-10
Identifier of signals digital 02-17-09 Mid-wire (qualifying symbol) 02-02-16
Indicator, Test point 02-17-05 Motion-Direction of bidirectional 02-04-02
Inherent control 02-03-11 Motion-Direction of bidirectional ratation 02-04-04
Insulating, material 02-07-07 Motion-Direction of reciprocating 02-04-06
Ionizing radiation 02-09-03 Motion-Direction of reciprocating 02-05-01
Key by operation 02-13-13 Motion-Direction of unidirectional 02-04-01
Keyboard 02-11-05 Motion-Direction of unidirectional rotation 02-04-03
Latching device, disengaged 02-12-12 Motion-Direction of unidirectional rotation, limited 02-04-05
Latching device, engaged 02-12-13 Moving (for example sliding) contact 02-17-04
Lever by operation 02-13-11 Mushroom-head safety feature 02-13-08
Limited, bidirectional torque, 02-04-05 Negative polarity 02-02-14 E
N
Limited, motion-Direction of unidirectional rotation 02-04-05 Negative-going pulse 02-10-02
Line, boundary 02-01-06 Negative-going step function 02-10-05 6
0
link functional 02-12-01 Neutral (qualifying symbol) 02-02-15 6
Link(s) hydraulic 02-12-01 1
Noiseless earth 02-15-02 7
Link(s) mechanical 02-12-01 Noiseless ground 02-15-02 -2
Link(s) pneumatic 02-12-01 Non linear, non inherent variability 02-03-02 :
1
Liquid level, actuated 02-14-01 Non-automatic return 02-12-08 9
3 9
9 Liquid material 02-07-03 Non-inherent non linear variability 02-03-02 6
©
B Force-Direction of bidirectional 02-04-02 Magnet, permanent 02-17-03
S
I Force-Direction of unidirectional 02-04-01 Magnetic field dependence 02-08-04
1
0
-1
Frame (connection) 02-15-04 Magnetic field effect or dependence 02-08-04
9
9
Function (symbol element) 02-01-01 Magnetic field effet 02-08-04
8 functional link 02-12-01 Magnetostrictive effect 02-08-03
Functional unit (symbol element) 02-01-01 Manual actuator protected against
Functional unit, outlines and enclosures unintentional operation 02-13-02
(Symbol elements) 02-01-01 Manually actuator 02-13-01
Gas flow, actuated 02-14-04 Material, Types of electret 02-07-05
Gas, material 02-07-04 Material, Types of solid 02-07-02
Gearing 02-12-23 Material, gas 02-07-04
Ground 02-15-01 Material, liquid 02-07-03
Ground and frame connection chassis 02-15-04 Material, unspecified 02-07-01
Ground and frame connection frame 02-15-04 Measuring transducer 02-17-06
Ground and frame connections equipotentiality 02-15-05 Mechanical brake 02-12-20
Ground and frame connections noiseless 02-15-02 Mechanical clutch 02-12-16
Ground and frame connections protective 02-15-03 Mechanical coupling 02-12-16
Gyrator, ideal 02-16-03 Mechanical coupling, disengaged 02-12-17
Handwheel operation 02-13-09 Mechanical coupling, engaged 02-12-18
Humidity, relative, actuated 02-14-05 Mechanical hydraulic connection (link), Controls 02-12-00
hydraulic link 02-12-01 Mechanical interlock between two devices 02-12-11
Ideal current source 02-16-01 mechanical link 02-12-01
Ideal gyrator 02-16-03 Mechanical link with indication of direction of
Ideal voltage source 02-16-02 force or motion 02-12-04
Identifier of signals analogue 02-17-08 Medium frequencies (audio) 02-02-10
Identifier of signals digital 02-17-09 Mid-wire (qualifying symbol) 02-02-16
Indicator, Test point 02-17-05 Motion-Direction of bidirectional 02-04-02
Inherent control 02-03-11 Motion-Direction of bidirectional ratation 02-04-04
Insulating, material 02-07-07 Motion-Direction of reciprocating 02-04-06
Ionizing radiation 02-09-03 Motion-Direction of reciprocating 02-05-01
Key by operation 02-13-13 Motion-Direction of unidirectional 02-04-01
Keyboard 02-11-05 Motion-Direction of unidirectional rotation 02-04-03
Latching device, disengaged 02-12-12 Motion-Direction of unidirectional rotation, limited 02-04-05
Latching device, engaged 02-12-13 Moving (for example sliding) contact 02-17-04
Lever by operation 02-13-11 Mushroom-head safety feature 02-13-08
Limited, bidirectional torque, 02-04-05 Negative polarity 02-02-14 E
N
Limited, motion-Direction of unidirectional rotation 02-04-05 Negative-going pulse 02-10-02
Line, boundary 02-01-06 Negative-going step function 02-10-05 6
0
link functional 02-12-01 Neutral (qualifying symbol) 02-02-15 6
Link(s) hydraulic 02-12-01 1
Noiseless earth 02-15-02 7
Link(s) mechanical 02-12-01 Noiseless ground 02-15-02 -2
Link(s) pneumatic 02-12-01 Non linear, non inherent variability 02-03-02 :
1
Liquid level, actuated 02-14-01 Non-automatic return 02-12-08 9
3 9
9 Liquid material 02-07-03 Non-inherent non linear variability 02-03-02 6
4 E
0 Non-inherent variability 02-03-00 Operational dependence on a characteristic N
Non-linear, inherent variability 02-03-04 quantity lower than the setting value 02-06-02 6
Number of events, Control by non electrical quantities 02-14-02 Operational dependence on a characteristic 0
Operated by cam 02-13-16 6
quantity becoming zero 02-06-04 1
Operated by cam and roller 02-13-19 Operational dependence on a characteristic 7
-2
Operated by crank 02-13-14 quantity differing from zero by an amount which :
Operated by electric clock 02-13-27 is very small compared with the normal value 02-06-05 1
9
Operated by electric motor 02-13-26 Operational dependence on a characteristic 9
Operated by handwheel 02-13-09 6
quantity either higher than a given high
Operated by key 02-13-13 setting or lower than a given low setting 02-06-03
Operated by lever 02-13-11 Operational dependence on a characteristic
Operated by pedal 02-13-10 quantity hinger than the setting value 02-06-00
Operated by proximity effect 02-13-06 optique link 02-12-01
Operated by pulling 02-13-03 Outlines and enclosures 02-01-01
Operated by pushing 02-13-05 Outlines and enclosures (Symbol elements) 02-01-04
Operated by removable handle 02-13-12 Outlines and enclosures (Symbol elements) tank 02-01-04
Operated by roller 02-13-15 Page printing 02-11-04
Operated by stored mechanical energy 02-13-20 Pedal by operated 02-13-10
Operated by touching 02-13-07 Perforated tape 02-11-02
Operated by turning 02-13-04 Permanent magnet 02-17-03
Operation, Methods by stored mechanical enery 02-13-20 pneumatic link 02-12-01
Operation, Methods of by electric clock 02-13-27 Polarity negative 02-02-14
Operation, Methods of by electric motor 02-13-26 Polarity positive 02-02-13
Operation, Methods of by electromagnetic actuator 02-13-23 Positive polarity 02-02-13
Operation, Methods of by electromagnetic Positive-going pulse 02-10-01
overcurrent protection 02-13-24 Positive-going step function 02-10-04
Operation, Methods of by emergency push-button swith 02-13-08 Power converter 02-17-06
Operation, Methods of by thermal actuator 02-13-25 Pre-set adjustabilit 02-03-05
Operation, Methods of hydraulic control, double acting 02-13-22 Printing and perforating, simultaneous, of one tape 02-11-03
Operation, Methods of hydraulic, single-acting 02-13-21 Printing, page 02-11-04
Operation, Methods of manual, general case 02-13-02 Printing, tape 02-11-01
Operation, Methods of pneumatic, singleacting 02-13-21 Profile plate 02-13-18
Operation, Methods of pneumtic control, double acting 02-13-22 Propagation both ways, not simultaneously 02-05-04
Operation by cam 02-13-16 Propagation one way 02-05-01
Operation by crank 02-13-14 Propagation, both ways, not simultaneously 02-05-03
Operation by key 02-13-13 Propagation, both ways, simultaneously 02-05-02
Operation by lever 02-13-11 Propagation, one way 02-05-01
Operation by pushing 02-13-05 Protected against unintentional operation, manual
Operation by removable handle 02-13-12 actuator 02-13-02
©
B
Operation by removable handle 02-13-12 Protection against direct contact 02-01-08
S
I
Operation by roller 02-13-15 Protective earth 02-15-03
1
0
Operation by touching 02-13-07 Protective ground 02-15-03
-1
9
Operation proximity effect 02-13-06 Proximity effect, operation 02-13-06
9
8
4 E
0 Non-inherent variability 02-03-00 Operational dependence on a characteristic N
Non-linear, inherent variability 02-03-04 quantity lower than the setting value 02-06-02 6
Number of events, Control by non electrical quantities 02-14-02 Operational dependence on a characteristic 0
Operated by cam 02-13-16 6
quantity becoming zero 02-06-04 1
Operated by cam and roller 02-13-19 Operational dependence on a characteristic 7
-2
Operated by crank 02-13-14 quantity differing from zero by an amount which :
Operated by electric clock 02-13-27 is very small compared with the normal value 02-06-05 1
9
Operated by electric motor 02-13-26 Operational dependence on a characteristic 9
Operated by handwheel 02-13-09 6
quantity either higher than a given high
Operated by key 02-13-13 setting or lower than a given low setting 02-06-03
Operated by lever 02-13-11 Operational dependence on a characteristic
Operated by pedal 02-13-10 quantity hinger than the setting value 02-06-00
Operated by proximity effect 02-13-06 optique link 02-12-01
Operated by pulling 02-13-03 Outlines and enclosures 02-01-01
Operated by pushing 02-13-05 Outlines and enclosures (Symbol elements) 02-01-04
Operated by removable handle 02-13-12 Outlines and enclosures (Symbol elements) tank 02-01-04
Operated by roller 02-13-15 Page printing 02-11-04
Operated by stored mechanical energy 02-13-20 Pedal by operated 02-13-10
Operated by touching 02-13-07 Perforated tape 02-11-02
Operated by turning 02-13-04 Permanent magnet 02-17-03
Operation, Methods by stored mechanical enery 02-13-20 pneumatic link 02-12-01
Operation, Methods of by electric clock 02-13-27 Polarity negative 02-02-14
Operation, Methods of by electric motor 02-13-26 Polarity positive 02-02-13
Operation, Methods of by electromagnetic actuator 02-13-23 Positive polarity 02-02-13
Operation, Methods of by electromagnetic Positive-going pulse 02-10-01
overcurrent protection 02-13-24 Positive-going step function 02-10-04
Operation, Methods of by emergency push-button swith 02-13-08 Power converter 02-17-06
Operation, Methods of by thermal actuator 02-13-25 Pre-set adjustabilit 02-03-05
Operation, Methods of hydraulic control, double acting 02-13-22 Printing and perforating, simultaneous, of one tape 02-11-03
Operation, Methods of hydraulic, single-acting 02-13-21 Printing, page 02-11-04
Operation, Methods of manual, general case 02-13-02 Printing, tape 02-11-01
Operation, Methods of pneumatic, singleacting 02-13-21 Profile plate 02-13-18
Operation, Methods of pneumtic control, double acting 02-13-22 Propagation both ways, not simultaneously 02-05-04
Operation by cam 02-13-16 Propagation one way 02-05-01
Operation by crank 02-13-14 Propagation, both ways, not simultaneously 02-05-03
Operation by key 02-13-13 Propagation, both ways, simultaneously 02-05-02
Operation by lever 02-13-11 Propagation, one way 02-05-01
Operation by pushing 02-13-05 Protected against unintentional operation, manual
Operation by removable handle 02-13-12 actuator 02-13-02
©
B
Operation by removable handle 02-13-12 Protection against direct contact 02-01-08
S
I
Operation by roller 02-13-15 Protective earth 02-15-03
1
0
Operation by touching 02-13-07 Protective ground 02-15-03
-1
9
Operation proximity effect 02-13-06 Proximity effect, operation 02-13-06
9
8
©
B Pulling, operated by 02-13-03 Tape printing 02-11-01
S
I Pulse of alternating current 02-10-03 Test point indicator 02-17-05
1
0
-1
Push-button emergency swith 02-13-08 Thermal device by actuated 02-13-25
9
9
Pushing by operation 02-13-05 Thermal effect 02-08-01
8 Radiation coherent, non-ionizing 02-09-01 Touching by operation 02-13-07
Radiation electromagnetic, non-ionizing 02-09-01 Transmission 02-05-04
Radiation, electromagnetic, non-ionizing 02-09-04 Transmission and reception, alternate 02-05-03
Radiation, ionizing 02-09-03 Turning, operated by 02-13-04
Reception 02-05-05 Types of electret, material 02-07-05
Reciprocating motion 02-04-06 Types of gas, material 02-07-04
Rectified current 02-02-12 Types of insulating, material 02-07-07
Relative humidity, actuated 02-14-05 Types of liquid, material 02-07-03
Relative, humidity, actuated 02-14-05 Types of unspecified, material 02-07-01
Relatively high frequencies 02-02-11 Unidirectional circular motion 02-04-03
Return automatic 02-12-07 Unidirectional force 02-04-01
Roller by operation 02-13-15 Unidirectional rectilinear motion 02-04-01
Rotation-Direction of bidirectional 02-04-04 Unintentional operation, manual actuator,
Rotation-Direction of bidirectional, limited 02-04-06 protected against 02-13-02
Rotation-Direction of unidirectional 02-04-03 Variability in steps 02-03-07
Saw-tooth 02-10-06 Variability non-inherent, non-linear 02-03-02
Screen 02-01-07 Variability, automatic (inherent) control 02-04-01
Semiconducting, material 02-07-06 Variability, continuous 02-03-09
Semiconductor actuator 02-13-28 Variability, inherent 02-03-03
Semiconductor effect 02-08-06 Variability, inherent, non-linear 02-03-04
Shield 02-01-07 Variability, pre-set adjustment 02-03-05
Signal converter 02-17-06 Variabiliy, stepping action 02-03-08
Signal waveforms negative-going step function 02-10-05 Voltage and Current, direct 02-02-03
Signal waveforms negtive-going pulse 02-10-02 Voltage source, ideal 02-16-02
Signal waveforms positive-going pulse 02-10-01
Signal waveforms pulse of alternating current 02-10-03
Signal waveforms pulse of alternating current 02-10-04
Signal waveforms, saw-tooth 02-10-06
Signals, identifier of analogue 02-17-08
Signals, identifier of digital 02-17-09
Simultaneous printing and perforating of one tape 02-11-03
Simultaneous transmission and reception 02-05-02 E
N
Simultaneously propagation, both ways 02-05-02
Solid material 02-07-02 6
0
Step function, negative-going 02-10-05 6
Stepping action 02-03-07 1
7
Stored mechanical energy by operation 02-13-20 -2
Switch(es), Single pole emergency push-button 02-13-08 :
1
Tank (symbol element) 02-01-04 9
4 9
1 Tape perforating or using perforated tape 02-11-02 6
©
B Pulling, operated by 02-13-03 Tape printing 02-11-01
S
I Pulse of alternating current 02-10-03 Test point indicator 02-17-05
1
0
-1
Push-button emergency swith 02-13-08 Thermal device by actuated 02-13-25
9
9
Pushing by operation 02-13-05 Thermal effect 02-08-01
8 Radiation coherent, non-ionizing 02-09-01 Touching by operation 02-13-07
Radiation electromagnetic, non-ionizing 02-09-01 Transmission 02-05-04
Radiation, electromagnetic, non-ionizing 02-09-04 Transmission and reception, alternate 02-05-03
Radiation, ionizing 02-09-03 Turning, operated by 02-13-04
Reception 02-05-05 Types of electret, material 02-07-05
Reciprocating motion 02-04-06 Types of gas, material 02-07-04
Rectified current 02-02-12 Types of insulating, material 02-07-07
Relative humidity, actuated 02-14-05 Types of liquid, material 02-07-03
Relative, humidity, actuated 02-14-05 Types of unspecified, material 02-07-01
Relatively high frequencies 02-02-11 Unidirectional circular motion 02-04-03
Return automatic 02-12-07 Unidirectional force 02-04-01
Roller by operation 02-13-15 Unidirectional rectilinear motion 02-04-01
Rotation-Direction of bidirectional 02-04-04 Unintentional operation, manual actuator,
Rotation-Direction of bidirectional, limited 02-04-06 protected against 02-13-02
Rotation-Direction of unidirectional 02-04-03 Variability in steps 02-03-07
Saw-tooth 02-10-06 Variability non-inherent, non-linear 02-03-02
Screen 02-01-07 Variability, automatic (inherent) control 02-04-01
Semiconducting, material 02-07-06 Variability, continuous 02-03-09
Semiconductor actuator 02-13-28 Variability, inherent 02-03-03
Semiconductor effect 02-08-06 Variability, inherent, non-linear 02-03-04
Shield 02-01-07 Variability, pre-set adjustment 02-03-05
Signal converter 02-17-06 Variabiliy, stepping action 02-03-08
Signal waveforms negative-going step function 02-10-05 Voltage and Current, direct 02-02-03
Signal waveforms negtive-going pulse 02-10-02 Voltage source, ideal 02-16-02
Signal waveforms positive-going pulse 02-10-01
Signal waveforms pulse of alternating current 02-10-03
Signal waveforms pulse of alternating current 02-10-04
Signal waveforms, saw-tooth 02-10-06
Signals, identifier of analogue 02-17-08
Signals, identifier of digital 02-17-09
Simultaneous printing and perforating of one tape 02-11-03
Simultaneous transmission and reception 02-05-02 E
N
Simultaneously propagation, both ways 02-05-02
Solid material 02-07-02 6
0
Step function, negative-going 02-10-05 6
Stepping action 02-03-07 1
7
Stored mechanical energy by operation 02-13-20 -2
Switch(es), Single pole emergency push-button 02-13-08 :
1
Tank (symbol element) 02-01-04 9
4 9
1 Tape perforating or using perforated tape 02-11-02 6
|
|
|
|
|
|
|
|
|
BSI Ð British Standards Institution
|
|
|
|
|
|
| BSI is the independent national body responsible for preparing British Standards. It
|
| presents the UK view on standards in Europe and at the international level. It is
|
| incorporated by Royal Charter.
|
| Revisions
|
|
| British Standards are updated by amendment or revision. Users of British Standards
|
| should make sure that they possess the latest amendments or editions.
|
|
| It is the constant aim of BSI to improve the quality of our products and services. We
|
| would be grateful if anyone finding an inaccuracy or ambiguity while using this
|
| British Standard would inform the Secretary of the technical committee responsible,
| the identity of which can be found on the inside front cover. Tel: 020 8996 9000.
|
| Fax: 020 8996 7400.
|
|
| BSI offers members an individual updating service called PLUS which ensures that
|
| subscribers automatically receive the latest editions of standards.
|
|
| Buying standards
|
|
| Orders for all BSI, international and foreign standards publications should be
| addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001.
|
|
| In response to orders for international standards, it is BSI policy to supply the BSI
|
| implementation of those that have been published as British Standards, unless
|
| otherwise requested.
|
|
| Information on standards
|
|
| BSI provides a wide range of information on national, European and international
| standards through its Library and its Technical Help to Exporters Service. Various
|