Professional Documents
Culture Documents
Hydraulic Oil Contamination - Test
Hydraulic Oil Contamination - Test
Page 1 sur 2
Ecran précédent
Essai et réglage
267B, 277B and 287B Multi Terrain Loaders Machine Systems
Numéro d'imprimé -RENR4887-02 Date de publication -01/05/2007 Date de mise à jour -23/05/2007
i02712962
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Use the following procedure to sample the oil in the hydraulic system.
Note: If the oil becomes contaminated, premature component failure could result. Contaminated oil
can also contribute to overheating.
3. Install a jumper line between the auxiliary lines. Cycle the auxiliary flow for one minute.
https://127.0.0.1:8443/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw... 13/05/2009
267B 277B 287B Multi Terrain Loader MDH00001-UP (MACHINE) POWERED B... Page 2 sur 2
Illustration 1 g01051544
7. Draw a 50 mL (1.7 fl oz) oil sample through the scheduled oil sampling valve. The level of the
contaminants must be less than or equal to the values in ISO 18/15. To meet this specification,
the concentration of contaminants must be less than or equal to the values in the following
Table 1.
Table 1
8. If the concentration of contaminants is higher than the values in the table, flush the hydraulic
system. Refer to Testing and Adjusting, "Filling and Flushing the Hydraulic System - Test" for
the proper procedure.
9. If the concentration of contaminants continues to be higher than the values in the table, change
the hydraulic oil. Refer to the Operation and Maintenance Manual, "Hydraulic System Oil -
Change" for further information.
Copyright 1993 - 2009 Caterpillar Inc. Wed May 13 10:19:22 UTC+0200 2009
Tous droits réservés.
Réseau privé pour utilisateurs autorisés de SIS.
https://127.0.0.1:8443/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw... 13/05/2009