Professional Documents
Culture Documents
Installation Manual OT-602
Installation Manual OT-602
Installation Manual OT-602
fm 1 ページ 2008年10月22日 水曜日 午前10時34分
5. Screw B
(3 × 8 mm) 2
9735
6. Short
connector 1
4349U053AA
7. Installation
manual
Adjustment plate
1
9J06IXC124DB
4980IXC019DA
3. Install the exit tray mounting holder (right) and
exit tray mounting holder (left) (one screw B each
furnished with the output tray).
Note:
Take the same procedures, though the machine
illustrations are different from the ones illustrated
in the procedures.
9J06IXC104DA
A00K-9631-03
E-1
A00K-9631-03E.fm 2 ページ 2008年10月22日 水曜日 午前10時34分
4. Install the exit tray (two screw A’s furnished with 7. Plug the short connector into the empty connec-
the output tray). tor of the finisher.
Note:
To prevent problems, be sure to securely tighten
the screws.
A00KIXC008DA
<FS-519>
5. Pull the lock release lever and remove the fin-
isher from the machine.
A01GIXC023DA
A00KIXC001DA
A00KIXC003DA
A00KIXC002DA
E-2
A00K-9631-03E.fm 3 ページ 2008年10月22日 水曜日 午前10時34分
<FS-522> <FS-530>
5. Open the front cover. 5. Open the front cover.
6. Remove the secondary cover (three screws). 6. Remove the screw for the band (one screw).
7. Remove the secondary cover (three screws).
4625IXC007DA
A00KIXC001MA
4625IXC011DA
A00KIXC002MA
4625IXC008DA
A00KIXC003MA
E-3
A00K-9631-03E.fm 4 ページ 2008年10月22日 水曜日 午前10時34分
10.Reinstall the screw for the band (one screw). 3. Install the exit tray mounting holder (right) and
exit tray mounting holder (left) (one screw B each
furnished with the output tray).
A00KIXC004MA
9J06IXC107DB
<FS-519>
5. Pull the lock release lever and remove the fin-
isher from the machine.
Adjustment plate
9J06IXC129DB
A00KIXC004DA
E-4
A00K-9631-03E.fm 5 ページ 2008年10月22日 水曜日 午前10時34分
A00KIXC002DA
4625IXC007DA
7. Plug the short connector into the empty connec-
tor of the finisher. 7. Plug the short connector into the empty connec-
tor of the finisher.
A00KIXC008DA
4625IXC011DA
8. Reinstall the connector cover that has been
removed in step 6 (one screw). 8. Reinstall the secondary cover that has been
removed in step 6 (three screws).
Note:
Make sure that there is a uniform clearance
between the misfeed clearing dial and secondary
cover.
A01GIXC023DA
4625IXC008DA
A00KIXC005DA
E-5
A00K-9631-03E.fm 6 ページ 2008年10月22日 水曜日 午前10時34分
A00KIXC004MA
A00KIXC002MA
A00KIXC003MA
E-6