Professional Documents
Culture Documents
Quickstart CN
Quickstart CN
Quickstart CN
Mini USB port 1. Tap the application icon on the home screen and
some illustrations that guide you through some of
(For connecting the diagnostic
important operations appear. Scroll the screen
connector to the tool.)
and tap on “Start Now” to enter the main menu
screen.
Mode indicators Tap on “Login” on the upper right corner.
NEAR CENTEROF DASH DLC Location A
Power indicator: Lights up while the connector is plugged into the vehicle's DLC.
Bluetooth/USB communication indicator: 2. Tap on “New Registration” in Figure A, input the information (items with * must
By default, it is in Bluetooth mode when the connector is energized and illuminates blue. be filled) and then tap on “Register”. Refer to Figure B.
It illuminates red when the connector is connected to the diagnostic tool via USB cable. 3. Input the Product S/N and Activation Code (can be obtained from the password
ECU communication indicator: It flashes when the connector is communicating with the envelope), and then tap on “Activate”. Refer to Figure C.
vehicle.
Create an Account
Install the diagnostic connector The Product S/N Product S/N
1. Locate vehicle’s DLC socket: It provides standard 16 pins and is generally located on and Activation Code
driver’s side, about 12 inches away from the center of dashboard. See Figure DLC in the Password
Location. If DLC is not equipped under dashboard, a label indicating its position will be Envelope are shown
Activation
given. In case no DLC is found, please refer to Automobile Repair Manual; as right figure. code
2. Plug the connector into the vehicle's DLC(It is suggested to use the OBD II extension cable
to connect the DLC and the connector). For vehicles with non-16PIN DLC, please choose
the desired connector. Normally the power indicator of diagnostic connector will light up.
5. Press the [POWER] button, the system starts initializing and enters the home screen.
C
OBD II Connector
2. Download the diagnostic software (For collecting vehicle data) OBD II Extension Cable
On the download page, tap on “Update” to start downloading.
During downloading, please make sure that the Wi-Fi has a stable and strong signal.
Note: By default, all vehicle software are selected. To deselect certain software, just uncheck
the box next to the software version.
To Vehicle’s DLC
Once downloading finished, the software packages will be installed automatically.
Note: All software is updated from time to time. To enjoy more better service and functions,
you are strongly suggested to keep synchronized with the latest version. Bluetooth Communication (recommended) Or
USB Cable (optional) (Sending vehicle data to the tool.)
Pictures illustrated here are for reference only and this Quick Start Guide is subject to change without notice. For more details, please refer to the User Manual of ScanPad071/ScanPad101.