Professional Documents
Culture Documents
Katalog 2023 GB Komprimiert PDF
Katalog 2023 GB Komprimiert PDF
2022 20:58:57
2023
74207 Leingarten
GERMANY
Eppinger Straße 221
74211 Leingarten
Joysticks with
hallsensor-technology
Joysticks with
contacts and potentiometer
Control-Switches
Opto-Electronic Encoders
Control Elements
Palm Grips
Control Console
Foot Pedals
Driver's Seats
Gessmann is an international market leader. Our success in the market is based upon our
decisive focus on innovative product development and the highest possible standards when it
comes to quality. Our product range includes:
Customized solutions for operating devices and electronic units for any
type of machinery and vehicles
Management certification:
Contents
Industrial Joysticks
Control Elements
Joysticks with hallsensor-technology
Mini-Joystick V21 p. 142-143
Multi-Axis Controller V85 / VV85 p. 1-11
Mini-Joystick S9 p. 144-145
Multi-Axis Controller V27 p. 12-20
Fingertip Joystick S15 p. 146-147
Multi-Axis Controller V26 p. 21-24
HEAVY DUTY
Palm Grips
Single-Axis Controller S26 p. 58-61
Palm Grip B36 p. 161-162
Housing p. 263-264
Driver's Seats
Industrial Controllers
DC-Contact SO / SS p. 296-297
For our general conditions for sale and delivery please refer to our website at www.gessmann.com
! Warning
Certain parts of this electrical device carry hazardous voltages when in
operation.
Installation, maintenance, modification or retrofitting may only be carri-
ed out by qualified personnel in consideration of the appropriate safety
precautionp.
Non-compliance may result in death, severe injuries or substantial
property damage.
W. Gessmann GmbH
P/O Box 11 51
74207 Leingarten
GERMANY
Eppinger Straße 221
74211 Leingarten
GERMANY
Phone +49 (0) 7131 40 67-722
Fax +49 (0) 7131 40 67-10
sales@gessmann.com
www.gessmann.com
The V85/VV85 is a robust joystick commonly used in electro-hydraulic applications. Long life
and high reliability is ensured by the latest contactless hall-technology. With many outputs and
grip options the V85/VV85 series is flexible and customisable.
Technical data
Example
VV85 S8 P T -Z80 +R11 -B -E... -S... -X
Basic unit
Reinforced version
VV85.1 1-axis
VV85 2-axis
Control-handle extended
S5 -20 mm
S8 +20 mm
Gate
P Cross gate
PX Special gate
T Dead man
H Signal button
D Push button
Technical details may vary based on configuration or application! Technical data subject to change without notice!
1
Multi-Axis Controller
V85 / VV85
Z Spring return
R Friction brake*
Latching:*
22 2-0-2
33 3-0-3
44 4-0-4
Degree of protection
B11 Joystick-main board sealed (IP67) and grip function sealed, grip with drain hole
E3xx CAN-interface
E6xx Profinet
E7xx PROFIsafe
Plug connectors
Special model
Technical details may vary based on configuration or application! Technical data subject to change without notice!
2
Multi-Axis Controller
V85 / VV85
Digital output
2. cable 14 x 0,25 mm2 (optional for grip function) 500 mm long without plug connector
Optional with plug connector (tandard plug connectors see page 125) S
1 axis E001 1
2 axis 2
2. cable 14 x 0,25 mm2 (optional for grip function) 500 mm long without plug connector
Optional with plug connector (standard plug connectors see page 125) S
1 axis E104 1
2 axis 2
Output options
Characteristic:
Inverse dual 1
Dual 2
Technical details may vary based on configuration or application! Technical data subject to change without notice!
3
Multi-Axis Controller
V85 / VV85
Voltage output
2. cable 14 x 0,25 mm2 (optional for grip function) 500 mm long without plug connector
Optional with plug connector (standard plug connectors see page 125) S
0,5...2,5...4,5 V redundant + 2 direction signals + 1 zero position signal (galvanically isolated) per axis
1 axis E112 1
2 axis 2
3 axis* 3
4 axis* 4
0...5...10 V redundant + 2 direction signals + 1 zero position signal (galvanically isolated) per axis, supply voltage 11,5 - 32 V DC
1 axis E132 1
2 axis 2
3 axis* 3
4 axis* 4
10...0...10 V + 2 direction signals + 1 zero position signal (galvanically isolated) per axis, supply voltage 11,5 - 32 V DC,
1 axis E136 1
2 axis 2
3 axis* 3
4 axis* 4
+10...0...-10 V + 2 direction signals + 1 zero position signal (galvanically isolated) per axis, supply voltage 11,5 - 32 V DC,
1 axis E138 1
2 axis 2
3 axis* 3
4 axis* 4
Output options
Characteristic:
Inverse dual *1 1
Dual *1 2
Single *2 5
*Axis for grip functions, interface can vary depending upon actuation element!
Technical details may vary based on configuration or application! Technical data subject to change without notice!
4
Multi-Axis Controller
V85 / VV85
Current output
2. cable 14 x 0,25 mm2 (optional for grip function) 500 mm long without plug connector
Optional with plug connector (standard plug connectors see page 125) S
0...10...20 mA + 2 direction signals + 1 zero position signal (galvanically isolated) per axis, sensor redundant
1 axis E206 1
2 axis 2
3 axis* 3
4 axis* 4
20...0...20 mA + 2 direction signals + 1 zero position signal (galvanically isolated) per axis, sensor redundant
1 axis E208 1
2 axis 2
3 axis* 3
4 axis* 4
4...12...20 mA + 2 direction signals + 1 zero position signal (galvanically isolated) per axis, sensor redundant
1 axis E214 1
2 axis 2
3 axis* 3
4 axis* 4
20...4...20 mA + 2 direction signals + 1 zero position signal (galvanically isolated) per axis, sensor redundant
1 axis E216 1
2 axis 2
3 axis* 3
4 axis* 4
+20...0...-20 mA + 2 direction signals + 1 zero position signal (galvanically isolated) per axis, sensor redundant
1 axis E226 1
2 axis 2
3 axis* 3
4 axis* 4
Output options
Single 5
*Axis for grip functions, interface can vary depending upon actuation element!
Technical details may vary based on configuration or application! Technical data subject to change without notice!
5
Multi-Axis Controller
V85 / VV85
CAN
E3091X: 85 mm
E3101X - E3103X: 85 mm
Wiring CAN (IN) cable 300 mm with plug connector M12 (male)
External in-/outputs cable 300 mm long without plug connector (additionally from 32 in-/outputs)
Optional with plug connector (standard plug connectors see page 125) S
- 8 external LED-outputs (dimmable optional), 1 switching output (potential-free, 100 mA), 8 external digital inputs 2
- 16 external LED-outputs (dimmable optional), 1 switching output (potential-free, 100 mA), 16* external digital inputs 3
*With the use of capacitive sensor, the external digital inputs are reduced by one input!
- 8 external LED-outputs (dimmable optional), 1 switching output (potential-free, 100 mA), 8 external digital inputs 2
- 16 external LED-outputs (dimmable optional), 1 switching output (potential-free, 100 mA), 16 external digital inputs 3
- 24 external LED-outputs (dimmable optional), 1 switching output (potential-free, 100 mA), 24 external digital inputs 4
- 32 external LED-outputs (dimmable optional), 1 switching output (potential-free, 100 mA), 32* external digital inputs 5
*With the use of two capacitive sensors, the external digital inputs are reduced by one input!
Main-axis with additional digital-/analog outputs separately wired (not via CAN)
Technical details may vary based on configuration or application! Technical data subject to change without notice!
6
Multi-Axis Controller
V85 / VV85
CANopen Safety
E4091X: 85 mm
E4101X - E4103X: 85 mm
Wiring CAN (IN) cable 300 mm with plug connector M12 (Male)
External in-/outputs cable 300 mm long without plug connector (additionally from 32 in-/outputs)
Optional with plug connector (standard plug connectors see page 125) S
- 8 external LED-outputs (dimmable optional), 1 switching output (potential-free, 100 mA), 8 external digital inputs 2
- 16 external LED-outputs (dimmable optional), 1 switching output (potential-free, 100 mA), 16* external digital inputs 3
*With the use of capacitive sensor, the external digital inputs are reduced by one input!
- 8 external LED-outputs (dimmable optional), 1 switching output (potential-free, 100 mA), 8 external digital inputs 2
- 16 external LED-outputs (dimmable optional), 1 switching output (potential-free, 100 mA), 16 external digital inputs 3
- 24 external LED-outputs (dimmable optional), 1 switching output (potential-free, 100 mA), 24 external digital inputs 4
- 32 external LED-outputs (dimmable optional), 1 switching output (potential-free, 100 mA), 32* external digital inputs 5
*With the use of two capacitive sensors, the external digital inputs are reduced by one input!
Main-axis with additional digital outputs separately wired (Not via CAN)
Technical details may vary based on configuration or application! Technical data subject to change without notice!
7
Multi-Axis Controller
V85 / VV85
Profibus DP
Supply voltage (applicable contact wiring) cable 12 x 0,25 mm2 300 mm long without plug connector
Optional with plug connector (standard plug connectors see page 125) S
Profibus DP E501 1
Main-axis with additional contact equipment separately wired (Not via profibus)
Profinet
Wiring Profinet (1), cable 300 mm with M12 plug connector (female)
Supply voltage (if applicable contact wiring) cable 12 x 0,25 mm2 300 mm long without plug connector
Optional with plug connector (standard plug connectors see page 125) S
Profinet E603 1
Technical details may vary based on configuration or application! Technical data subject to change without notice!
8
Multi-Axis Controller
V85 / VV85
PROFIsafe
Wiring Profinet (IN), cable 300 mm with M12 plug connector (female)
Supply voltage (if applicable contact wiring) cable 12 x 0,25 mm2 300 mm long without plug connector
Optional with plug connector (standard plug connectors see page 125) S
PROFIsafe E703 1
Main-axis with additional signals separately wired (not via profinet safe)
PWM Outputs
PWM-frequency 1225 Hz
Cable 3 (creep speed / dead man) 14 x 0,25 mm2 300 mm long without plug
Optional with plug connector (standard plug connectors see page 125) S
PWM Output 0-3 A for 2 proportional valve magnets per axis 1 axis E801 1
2 axis 2
3 axis 3
4 axis 4
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
9
Multi-Axis Controller
V85 / VV85
Other outputs
2. cable 14 x 0,25 mm2 300 mm long without plug connector (optional for grip function)
Optional with plug connector (standard plug connectors see page 125) S
1 axis E907 1
2 axis 2
3 axis 3
4 axis 4
5 axis 5
6 axis 6
Main-axis with additional direction signals and zero direction signals (potential-free) per main-axis 3
8 Bit Gray-Code with direction signals per main-axis, supply voltage 9-36 V DC
Mounting depth A 85 mm
Wiring: 1. cable 37 x 0,14 mm2 300 mm long without plug connector (axis 1+2)
2. cable 37 x 0,14 mm2 300 mm long without plug connector (optional for axis 3+4)
Optional with plug connector (standard plug connectors see page 125) S
1 axis E903 1
2 axis 2
3 axis 3
4 axis 4
8 Bit binary-Code with direction signals per main-axis, supply voltage 9-36 V DC
Mounting depth A 85 mm
Wiring: 1. cable 37 x 0,14 mm2 300 mm long without plug connector (axis 1+2)
2. cable 37 x 0,14 mm2 300 mm long without plug connector (optional for axis 3+4)
Optional with plug connector (standard plug connectors see page 125) S
1 axis E904 1
2 axis 2
3 axis 3
4 axis 4
Attachments
Z01 Mating connector (CAN) M12 (male insert) with 2 m cable 20201140
Z02 Mating connector (CAN) M12 (female contact) with 2 m cable 20202298
Z05 Mating connector (Profinet) M12 (male insert) with 2 m cable 5300000222
Technical details may vary based on configuration or application! Technical data subject to change without notice!
10
Multi-Axis Controller
V85 / VV85
1 / 133
215
* 30°
30° *
* Type with firction brake
160
deflection max. 25 deg.
* Type with detent
deflection max. 25 deg.
10,5
Cover plate
(According
to board)
A
A
90
(Cover housing) Palm grip B25
1
13
108,5
225
Hole pattern
M6
92
76,5
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
11
Multi-Axis Controller
V27
The V27 is a robust joystick commonly used in electro-hydraulic applications. The compact
design allows for use in smallest installation spaces. It can be integrated with detents and a very
robust friction brake. Long life and high reliability is ensured by the latest contactless hall-tech-
nology. With many outputs and grip options the V27 series is flexible and customisable.
Technical data
Example
V27 S8 P T -R11 +Z -B10 -E... -S. .. -X
Basic unit
V27.1 Multi-Axis Controller, 1-axis
V27 Multi-Axis Controller, 2-axis
Control-handle extended
Standard 95 mm*
S8 +20 mm
*Only available in combination with a handle!
Gate
P Cross gate
PX Special gate
Technical details may vary based on configuration or application! Technical data subject to change without notice!
12
Multi-Axis Controller
V27
Degree of protection
B10 Joystick-main board sealed (IP67)
B11 Joystick-main board sealed (IP67) and grip function sealed, grip with drain hole
For a schematic description of the protection class (see page 126)
Plug connectors
S... Standard plug connectors (see page 125)
Special model
X Special / customer specified
Digital output
Supply voltage 9-32 V DC
Current carrying capacity Direction signal 150 mA
Zero position signal 500 mA
Mounting depth A 45 mm
Wiring 1. cable 14 x 0,25 mm2 500 mm long without plug connector
2. cable 14 x 0,25 mm2 (optional for grip function) 500 mm long without plug connector
Optional with plug connector (standard plug connectors see page 125) S
2 Direction signals + 1 zero position signal (galvanically isolated) per axis
V2023/1 01.01.2023
1 axis E001 1
2 axis 2
Technical details may vary based on configuration or application! Technical data subject to change without notice!
13
Multi-Axis Controller
V27
Voltage output
Supply voltage 9-32 V DC (*11,5-32)
Current carrying capacity Direction signal 150 mA
Zero position signal 500 mA
Mounting depth A 45 mm (60 mm from 3 axis)
Wiring 1. cable 14 x 0,25 mm2 500 mm long without plug connector
2. cable 14 x 0,25 mm2 (optional for grip function) 500 mm long without plug connector
Optional with plug connector (standard plug connectors see page 125) S
0,5...2,5...4,5 V redundant + 2 direction signals + 1 zero position signal (galvanically isolated) per axis
1 axis E112 1
2 axis 2
3 axis* 3
4 axis* 4
0...5...10 V redundant + 2 direction signals + 1 zero position signal (galvanically isolated) per axis, supply voltage 11,5 - 32 V DC
1 axis E132 1
2 axis 2
3 axis* 3
4 axis* 4
10...0...10 V + 2 direction signals + 1 zero position signal (galvanically isolated) per axis, supply voltage 11,5 - 32 V DC,
sensor redundant with error monitoring and error signal
1 axis E136 1
2 axis 2
3 axis* 3
4 axis* 4
Output options
Characteristic:
Inverse dual *1 1
Dual *1 2
Inverse dual with dead zone +/- 3° *1 (standard) 3
Dual with dead zone +/- 3° *1 4
*1 Not combinable with output E136X
Single *2 5
Single with dead zone *2 (standard) 6
*2 Not combinable with output E112X and E132X
*Axis for grip functions, interface can vary depending upon actuation element!
Voltage output with other value on request!
Technical details may vary based on configuration or application! Technical data subject to change without notice!
14
Multi-Axis Controller
V27
Current output
2. cable 14 x 0,25 mm2 (optional for grip function) 500 mm long without plug connector
Optional with plug connector (standard plug connectors see page 125) S
0...10...20 mA + 2 direction signals + 1 zero position signal (galvanically isolated) per axis, sensor redundant
1 axis E206 1
2 axis 2
3 axis* 3
4 axis* 4
20...0...20 mA + 2 direction signals + 1 zero position signal (galvanically isolated) per axis, sensor redundant
1 axis E208 1
2 axis 2
3 axis* 3
4 axis* 4
4...12...20 mA + 2 direction signals + 1 zero position signal (galvanically isolated) per axis, sensor redundant
1 axis E214 1
2 axis 2
3 axis* 3
4 axis* 4
20...4...20 mA + 2 direction signals + 1 zero position signal (galvanically isolated) per axis, sensor redundant
1 axis E216 1
2 axis 2
3 axis* 3
4 axis* 4
Output options
Single 5
*Axis for grip functions, interface can vary depending upon actuation element!
Technical details may vary based on configuration or application! Technical data subject to change without notice!
15
Multi-Axis Controller
V27
V27.1 V27
1 1
3 4
2 2
CAN
60 mm (expansion stage 2)
80 mm (expansion stage 3)
Wiring CAN (IN) cable 300 mm with plug connector M12 (male)
External in-/outputs cable 300 mm long without plug connector (additional from 32 in-/outputs)
Optional with plug connector (standard plug connectors see page 125) S
Main-axis with additional digital outputs separately wired (not via CAN)
- 8 external LED-outputs (dimmable optional), 1 switching output (potential-free, 100 mA), 8 external digital inputs 2
- 16 external LED-outputs (dimmable optional), 1 switching output (potential-free, 100 mA), 16 external digital inputs 3
16
Multi-Axis Controller
V27
- 8 external LED-outputs (dimmable optional), 2 switching outputs (potential-free, 100 mA), 8 external digital inputs 2
- 16 external LED-outputs (dimmable optional), 2 switching outputs (potential-free, 100 mA), 16 external digital inputs 3
- 24 external LED-outputs (dimmable optional), 2 switching outputs (potential-free, 100 mA), 24 external digital inputs 4
- 32 external LED-outputs (dimmable optional), 2 switching outputs (potential-free, 100 mA), 32 external digital inputs 5
Main-axis with additional digital outputs separately wired (not via CAN)
CANopen Safety
60 mm (expansion stage 2)
80 mm (expansion stage 3)
Wiring CAN (IN) cable 300 mm with plug connector M12 (male)
External in-/outputs cable 300 mm long without plug connector (additional from 32 in-/outputs)
Optional with plug connector (standard plug connectors see page 125) S
Main-axis with additional digital outputs separately wired (not via CAN)
- 8 external LED-outputs (dimmable optional), 1 switching output (potential-free, 100 mA), 8 external digital inputs 2
V2023/1 01.01.2023
- 16 external LED-outputs (dimmable optional), 1 switching output (potential-free, 100 mA), 16 external digital inputs 3
Technical details may vary based on configuration or application! Technical data subject to change without notice!
17
Multi-Axis Controller
V27
- 8 external LED-outputs (dimmable), 2 switching outputs (potential-free, 100 mA), 8 external digital inputs 2
- 16 external LED-outputs (dimmable), 2 switching outputs (potential-free, 100 mA), 16 external digital inputs 3
- 24 external LED-outputs (dimmable), 2 switching outputs (potential-free, 100 mA), 24 external digital inputs 4
- 32 external LED-outputs (dimmable), 2 switching outputs (potential-free, 100 mA), 32 external digital inputs 5
Main-axis with additional digital outputs separately wired (not via CAN)
Profinet
Supply voltage 18-30 V DC
Baud rate To 100 MBit/s
Ausgangswert 0...512...1023
Mounting depth A 90 mm
Wiring Profinet (1), cable 300 mm with M12 plug connector (female)
Profinet (2), cable 300 mm with M12 plug connector (female)
Supply voltage (if applicable contact wiring) cable 12 x 0,25 mm2 300 mm long without plug connector
External in-/outputs, cable 300 mm long without plug connector
Optional with plug connector (standard plug connectors see page 125) S
Profinet E602 1
- 4 analog joystick axis
- 20 digital joystick functions
- Input for capacitive sensor
Main-axis with additional signals separately wired (not via profinet safe)
- 2 direction signals + zero position signal (potential-free) per main-axis 3
18
Multi-Axis Controller
V27
PROFIsafe
Mounting depth A 90 mm
Wiring Profinet (1), cable 300 mm with M12 plug connector (female)
Supply voltage (if applicable contact wiring) cable 12 x 0,25 mm2 300 mm long without plug connector
Optional with plug connector (standard plug connectors see page 125) S
PROFIsafe E702 1
Main-axis with additional signals separately wired (not via profinet safe)
Other outputs
2. cable 14 x 0,25 mm2 300 mm long without plug connector (optional for grip function)
Optional with plug connector (standard plug connectors see page 125) S
1 axis E907 1
2 axis 2
3 axis 3
4 axis 4
Main-axis with additional direction signals and zero direction signals (potential-free) per main-axis 3
Attachments
Technical details may vary based on configuration or application! Technical data subject to change without notice!
19
Multi-Axis Controller
V27
Palm grip B3
Standard
installed from the top
205
° 20
20 °
122
115
15,30
Cover plate
44
board housing
65
Palm grip B25 handle
installed from below
78
1
° 18
18
60
°
3 4
210
64
2
Hole pattern
56,5 ±0,2
5
Hole pattern
from below
3,5
40
70
51
Technical details may vary based on configuration or application! Technical data subject to change without notice!
20
Multi-Axis Controller
V26
The V26 is a robust joystick commonly used in electro-hydraulic applications. Long life and
high reliability is ensured by the latest contactless hall-technology. With many outputs and grip
options the V26 series is hugely customisable.
Technical data
Basic unit
T Dead man
H Signal button
D Push button
Axis 1
R Friction brake
Axis 2
R Friction brake
Cover housing
E3xx CAN-interface
Plug connectors
Special model
Technical details may vary based on configuration or application! Technical data subject to change without notice!
21
Multi-Axis Controller
V26
CAN
Supply voltage 9-36 V DC
Idle current consumption 120 mA
External digital output for LEDs 5-30 mA (dependent on the number of LEDs)
Digital switching output (potential-free) 100 mA
Mounting depth A E3091: 105 mm
E3091X: 130 mm
E3101X - E3103X: 130 mm
E3104X - E3105X: 160 mm
Protocol CANopen CiA DS 301 or SAE J 1939 (based on)
Baud rate 125 kBit/s to 1 Mbit/s (standard 250 kBit/s)
Wiring CAN (IN) cable 300 mm with plug connector M12 (male)
CAN (OUT) cable 300 mm with plug connector M12 (female)
External in-/outputs cable 300 mm without plug connector
External in-/outputs cable 300 mm without plug connector (additionally from 32 in-/outputs)
Optional with plug connector (standard plug connectors see page 125) S
CAN expansion stage 1 E309 1
- 7 analog joystick axis
- 16 digital joystick functions
- Input for capacitive sensor
*With the use of capacitive sensor, the external digital inputs are reduced by one input!
CANopen Safety
Supply voltage 9-36 V DC
Idle current consumption 120 mA
External digital output for LEDs 5-30 mA (dependent on the number of LEDs)
Digital switching output (potential-free) 100 mA
E4091: 105 mm
Mounting depth A
E4091X: 130 mm
E4101X - E3103X: 130 mm
E4104X - E3105X: 160 mm
Protocol CANopen Safety EN50325-5
Baud rate 125 kBit/s to 1 Mbit/s (standard 250 kBit/s)
Wiring CAN (IN) cable 300 mm with plug connector M12 (male)
CAN (OUT) cable 300 mm with plug connector M12 (female)
External in-/outputs cable 300 mm without plug connector
External in-/outputs cable 300 mm without plug connector (additionally from 32 in-/outputs)
Optional with plug connector (standard plug connectors see page 125) S
CAN expansion stage 1 E309 1
- 7 analog joystick axis
- 16 digital joystick functions
- Input for capacitive sensor
*With the use of capacitive sensor, the external digital inputs are reduced by one input!
Technical details may vary based on configuration or application! Technical data subject to change without notice!
22
Multi-Axis Controller
V26
Attachments
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
23
Multi-Axis Controller
V26
point of actuation
10-12 N
169
limit stop possible at Palm grip B20
0° / 10° / 20° / 30° / 40°
236
150
SR1 SR2 12
Cover plate
IP 00
(According to
the board)
101 (A)
88,5
(Cover housing)
point of actuation 4-6 N
various deflection
overstop plate possible
SR3 SR4
max. max. Hole pattern
120
135° 135°
M6
92
76,5
100
Technical details may vary based on configuration or application! Technical data subject to change without notice!
24
Multi-Axis Controller
V25
The V25 is a compact and robust joystick commonly used in electro-hydraulic applications. Long
life and high reliability is ensured by the latest contactless hall-technology. With many outputs
and grip options the V25 series is hugely customisable.
Technical data
Example
V25 S8 P T -Z -B10 -E... -S... -X
Basic unit
V25.1 Multi-Axis Controller, 1-axis
V25 Multi-Axis Controller, 2-axis
Control-handle long
Standard 100 mm*
S8 +20 mm
*Only available in combination with a handle!
Gate
P Cross gate (deflection angle max. 15°)
Z Spring return
Degree of protection
B Cover housing
B10 Joystick-main board sealed (IP67)
B11 Joystick-main board sealed (IP67) and grip function sealed, grip with drain hole
For a schematic description of the protection class (see page 126)
E7xx PROFIsafe
E9xx Other outputs
Technical details may vary based on configuration or application! Technical data subject to change without notice!
25
Multi-Axis Controller
V25
Plug connectors
Special model
Digital output
Mounting depth A 60 mm
2. cable 14 x 0,25 mm2 (optional for grip function) 500 mm long without plug connector
Optional with plug connector (standard plug connectors see page 125) S
1 axis E001 1
2 axis 2
Technical details may vary based on configuration or application! Technical data subject to change without notice!
26
Multi-Axis Controller
V25
Voltage output
Supply voltage 9-32 V DC (*11,5-32)
Current carrying capacity Direction signal 150 mA
Zero position signal 500 mA
Mounting depth A 60 mm
Wiring 1. cable 14 x 0,25 mm2 500 mm long without plug connector
2. cable 14 x 0,25 mm2 (optional for grip function) 500 mm long without plug connector
Optional with plug connector (standard plug connectors see page 125) S
0,5...2,5...4,5 V redundant + 2 direction signals + 1 zero position signal (galvanically isolated) per axis
1 axis E112 1
2 axis 2
3 axis* 3
4 axis* 4
0...5...10 V redundant + 2 direction signals + 1 zero position signal (galvanically isolated) per axis, supply voltage 11,5 - 32 V DC
1 axis E132 1
2 axis 2
3 axis* 3
4 axis* 4
10...0...10 V + 2 direction signals + 1 zero position signal (galvanically isolated) per axis, supply voltage 11,5 - 32 V DC,
sensor redundant with error monitoring and error signal
1 axis E136 1
2 axis 2
3 axis* 3
4 axis* 4
Output options
Characteristic:
Inverse dual *1 1
Dual *1 2
Inverse dual with dead zone +/- 3° *1 (standard) 3
Dual with dead zone +/- 3° *1 4
*1 Not combinable with output E136X
Single *2 5
Single with dead zone +/- 3° *2 (standard) 6
*2 Not combinable with output E112X and E132X
*Axis for grip functions, interface can vary depending upon actuation element!
Voltage output with other value on request!
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
27
Multi-Axis Controller
V25
Current output
Mounting depth A 60 mm
2. cable 14 x 0,25 mm2 (optional for grip function) 500 mm long without plug connector
Optional with plug connector (standard plug connectors see page 125) S
0...10...20 mA + 2 direction signals + 1 zero position signal (galvanically isolated) per axis, sensor redundant with error monitoring
1 axis E206 1
2 axis 2
3 axis* 3
4 axis* 4
20...0...20 mA + 2 direction signals + 1 zero position signal (galvanically isolated) per axis, sensor redundant with error monitoring
1 axis E208 1
2 axis 2
3 axis* 3
4 axis* 4
4...12...20 mA + 2 direction signals + 1 zero position signal (galvanically isolated) per axis, sensor redundant with error monitoring
1 axis E214 1
2 axis 2
3 axis* 3
4 axis* 4
20...4...20 mA + 2 direction signals + 1 zero position signal (galvanically isolated) per axis, sensor redundant with error monitoring
1 axis E216 1
2 axis 2
3 axis* 3
4 axis* 4
Output options
Single 5
*Axis for grip functions, interface can vary depending upon actuation element!
Technical details may vary based on configuration or application! Technical data subject to change without notice!
28
Multi-Axis Controller
V25
V25.1 V25
1 1
3 4
2 2
CAN
70 mm (expansion stage 2)
90 mm (expansion stage 3)
Wiring CAN (IN) cable 300 mm with plug connector M12 (male)
External in-/outputs cable 300 mm long without plug connector (additional from 32 in-/outputs)
Optional with plug connector (standard plug connectors see page 125) S
Main-axis with additional digital outputs separately wired (not via CAN)
- 8 external LED-outputs (dimmable optional), 1 switching output (potential-free, 100 mA), 8 external digital inputs 2
- 16 external LED-outputs (dimmable optional), 1 switching output (potential-free, 100 mA), 16 external digital inputs 3
Technical details may vary based on configuration or application! Technical data subject to change without notice!
29
Multi-Axis Controller
V25
- 8 external LED-outputs (dimmable optional), 2 switching outputs (potential-free, 100 mA), 8 external digital inputs 2
- 16 external LED-outputs (dimmable optional), 2 switching outputs (potential-free, 100 mA), 16 external digital inputs 3
- 24 external LED-outputs (dimmable optional), 2 switching outputs (potential-free, 100 mA), 24 external digital inputs 4
- 32 external LED-outputs (dimmable optional), 2 switching outputs (potential-free, 100 mA), 32 external digital inputs 5
Main-axis with additional digital outputs separately wired (not via CAN)
CANopen Safety
70 mm (expansion stage 2)
90 mm (expansion stage 3)
Wiring CAN (IN) cable 300 mm with plug connector M12 (male)
External in-/outputs cable 300 mm long without plug connector (additional from 32 in-/outputs)
Optional with plug connector (standard plug connectors see page 125) S
Main-axis with additional digital outputs separately wired (not via CAN)
- 8 external LED-outputs (dimmable optional), 1 switching output (potential-free, 100 mA), 8 external digital inputs 2
- 16 external LED-outputs (dimmable optional), 1 switching output (potential-free, 100 mA), 16 external digital inputs 3
Technical details may vary based on configuration or application! Technical data subject to change without notice!
30
Multi-Axis Controller
V25
- 8 external LED-outputs (dimmable optional), 2 switching outputs (potential-free, 100 mA), 8 external digital inputs 2
- 16 external LED-outputs (dimmable optional), 2 switching outputs (potential-free, 100 mA), 16 external digital inputs 3
- 24 external LED-outputs (dimmable optional), 2 switching outputs (potential-free, 100 mA), 24 external digital inputs 4
- 32 external LED-outputs (dimmable optional), 2 switching outputs (potential-free, 100 mA), 32 external digital inputs 5
Main-axis with additional digital outputs separately wired (not via CAN)
Profinet
Mounting depth A 90 mm
Verdrahtung Profinet (1), cable 300 mm with M12 plug connector (female)
Supply voltage (if applicable contact wiring) cable 12 x 0,25 mm2 300 mm long without plug connector
Optional with plug connector (standard plug connectors see page 125) S
Profinet E602 1
Technical details may vary based on configuration or application! Technical data subject to change without notice!
31
Multi-Axis Controller
V25
PROFIsafe
Mounting depth A 90 mm
Wiring Profinet (1), cable 300 mm with M12 plug connector (female)
Supply voltage (if applicable contact wiring) cable 12 x 0,25 mm2 300 mm long without plug connector
Optional with plug connector (standard plug connectors see page 125) S
PROFIsafe E702 1
Main-axis with additional signals separately wired (not via profinet safe)
Other outputs
Mounting depth A 60 mm
2. cable 14 x 0,25 mm2 300 mm long without plug connector (optional for grip function)
Optional with plug connector (standard plug connectors see page 125) S
1 axis E907 1
2 axis 2
3 axis 3
4 axis 4
Main-axis with additional direction signals and zero direction signals (potential-free) per main-axis 3
Attachments
Technical details may vary based on configuration or application! Technical data subject to change without notice!
32
Multi-Axis Controller
V25
1 /135
H M
20° 20°
215
165
100
Cover plate
(According
to board)
6
A
A
65
(Cover housing)
3 4
223
Hole pattern
56,5 ±0,2
5
A
70
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
33
Multi-Axis Controller
V24
The Multi-Axis Controller V24 is designed as a driving joystick for construction and agricultural
machinery. It has a parking position which can be inserted in the zero position. The V24 is cha-
racterized by its extremely rugged design. Long life and high reliability is ensured by the latest
contactless hall-technology. Through its various interfaces and many possibilities of combinati-
on with our numerous ball grips the V24 is very flexible.
Technical data
Example
V24 P1 T -R -B10 -E... -S... -X
Basic unit
Gate
PX Special gate
T Dead man
H Signal button
D Push button
Main axis
Degree of protection
B11 Joystick-main board sealed (IP67) and grip function sealed, grip with drain hole
E3xx CAN-interface
Plug connectors
Special model
Technical details may vary based on configuration or application! Technical data subject to change without notice!
34
Multi-Axis Controller
V24
Mounting depth A 60 mm
2. cable 14 x 0,25 mm2 (optional for grip function) 500 mm long without plug connector
Optional with plug connector (standard plug connectors see page 125) S
0,5...2,5...4,5 V redundant
1 axis E103 1
2 axis 2
Output options
Characteristic:
Inverse dual 1
Dual 2
Voltage output
Mounting depth A 65 mm
2. cable 14 x 0,25 mm2 (optional for grip function) 500 mm long without plug connector
Optional with plug connector (standard plug connectors see page 125) S
0,5...2,5...4,5 V redundant + 2 direction signals + 1 zero position signal (galvanically isolated) per axis
1 axis E112 1
2 axis 2
3 axis* 3
4 axis* 4
5 axis* 5
6 axis* 6
V2023/1 01.01.2023
0...5...10 V redundant + 2 direction signals + 1 zero position signal (galvanically isolated) per axis, supply voltage 11,5 - 32 V DC
1 axis E132 1
2 axis 2
Technical details may vary based on configuration or application! Technical data subject to change without notice!
35
Multi-Axis Controller
V24
3 axis* 3
4 axis* 4
5 axis* 5
6 axis* 6
10...0...10 V + 2 direction signals + 1 zero position signal (galvanically isolated) per axis, supply voltage 11,5 - 32 V DC,
sensor redundant with error monitoring and error signal
1 axis E136 1
2 axis 2
3 axis* 3
4 axis* 4
5 axis* 5
6 axis* 6
Output options
Characteristic:
Inverse dual *1 1
Dual *1 2
Inverse dual with dead zone +/- 3° *1 (standard) 3
Dual with dead zone +/- 3° *1 4
*1 Not combinable with output E136X + E138X
Single *2 5
Single with dead zone *2 (standard) 6
*2 Not combinable with output E112X and E132X
*Axis for grip functions, interface can vary depending upon actuation element!
Voltage output with other value on request!
Current output
Supply voltage 9-32 V DC
Current carrying capacity Direction signal 150 mA
Zero position signal 500 mA
Mounting depth A 65 mm
Option Input for capacitive sensor
Wiring 1. cable 14 x 0,25 mm2 500 mm long without plug connector
2. cable 14 x 0,25 mm2 (optional for grip function) 500 mm long without plug connector
Optional with plug connector (standard plug connectors see page 125) S
0...10...20 mA + 2 direction signals + 1 zero position signal (galvanically isolated) per axis, sensor redundant with error monitoring
and error signal
1 axis E206 1
2 axis 2
3 axis* 3
4 axis* 4
5 axis* 5
6 axis* 6
20...0...20 mA + 2 direction signals + 1 zero position signal (galvanically isolated) per axis, sensor redundant with error monitoring
and error signal
1 axis E208 1
2 axis 2
3 axis* 3
4 axis* 4
5 axis* 5
6 axis* 6
Technical details may vary based on configuration or application! Technical data subject to change without notice!
36
Multi-Axis Controller
V24
4...12...20 mA + 2 direction signals + 1 zero position signal (galvanically isolated) per axis, sensor redundant with error monitoring
1 axis E214 1
2 axis 2
3 axis* 3
4 axis* 4
5 axis* 5
6 axis* 6
20...4...20 mA + 2 direction signals + 1 zero position signal (galvanically isolated) per axis, sensor redundant with error monitoring
1 axis E216 1
2 axis 2
3 axis* 3
4 axis* 4
5 axis* 5
6 axis* 6
Output options
Single 5
*Axis for grip functions, interface can vary depending upon actuation element!
CAN
Wiring CAN (IN) cable 300 mm with plug connector M12 (male)
Optional with plug connector (standard plug connectors see page 125) S
CAN E312 1
*With the use of external inputs, the joystickfunctions are reduced by 7 pieces!
- 8 external LED-outputs, 1 switching output (potentialfree, 100 mA), 7 external digital inputs 2
- 16 external LED-outputs, 1 switching output (potentialfree, 100 mA), 7 external digital inputs 3
Technical details may vary based on configuration or application! Technical data subject to change without notice!
37
Multi-Axis Controller
V24
CANopen Safety
Mounting depth A 60 mm
Wiring CAN (IN) cable 300 mm with plug connector M12 (male)
Optional with plug connector (standard plug connectors see page 125) S
*With the use of external inputs, the joystickfunctions are reduced by 7 pieces!
- 8 external LED-outputs, 1 switching output (potentialfree, 100 mA), 7 external digital inputs 2
- 16 external LED-outputs, 1 switching output (potentialfree, 100 mA), 7 external digital inputs 3
Other outputs
Mounting depth A 60 mm
2. cable 14 x 0,25 mm2 300 mm long without plug connector (optional for grip function)
Optional with plug connector (standard plug connectors see page 125) S
1 axis E907 1
2 axis 2
3 axis 3
4 axis 4
5 axis 5
6 axis 6
Main-axis with additional direction signals and zero direction signals (potential-free) per main-axis 3
Attachments
Z01 Mating connector (CAN) M12 (male insert) with 2 m cable 20201140
Z02 Mating connector (CAN) M12 (female contact) with 2 m cable 20202298
Technical details may vary based on configuration or application! Technical data subject to change without notice!
38
Multi-Axis Controller
V24
1 / V24
10° 10°
25°
25°
206
Cover plate
12,3
60
91 91
1
13
108,5
Hole pattern
M6
92
76,5
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
39
Multi-Axis Controller
V1
The V1 is a robust Joystick commonly used in electro-hydraulic applications. The modular de-
sign enables the switching device to be used universally. Long life and high reliability is ensured
by the latest contactless hall-technology.
Technical data
Basic unit
Gate
P Cross gate
PX Special gate
Axis 1
Z Spring return
R Friction brake
Z Spring return
R Friction brake
Cover housing
Plug connectors
Special model
Technical details may vary based on configuration or application! Technical data subject to change without notice!
40
Multi-Axis Controller
V1
Mounting depth A 85 mm
Optional with plug connector (standard plug connectors see page 125) S
1 axis E103 1
2 axis 2
3 axis* 3
4 axis* 4
5 axis* 5
6 axis* 6
Output options
Characteristic:
Inverse dual 1
Dual 2
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
41
Multi-Axis Controller
V1
αβγδ 1/
rotation angle D
+20° -20°
handle
55 angle of inclination rotable and inclinable
N
11° 11° 11° 11°
15°
15°
15°
handle
15°
33
H/S
N lift and sink
H/S
63
+4
-4
Cover plate
17,5
board housing
hole pattern
56,5 ±0,2
5
D
78
93
66
Technical details may vary based on configuration or application! Technical data subject to change without notice!
42
Double-Handle Controller
D85
The Double-Handle Controller D85 is a robust switching device for electro hydraulic and hois-
ting applications. Long life and high reliability is ensured by the latest contactless hall-technolo-
gy. The modular design enables the switching device to be used universally.
Technical data
Example
D85 S5 Q / Q -Z +R -B -E... -S... -X
Basic unit
Control-handle extended
S5 -20 mm
S8 +20 mm
Knob
T Dead man
H Signal button
D Push button
Q T-grip
Z Spring return
R Friction brake
Z Spring return
R Friction brake
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
43
Double-Handle Controller
D85
Cover housing
B Cover housing
E3xx CAN-interface
E6xx Profinet
E7xx PROFIsafe
Plug connectors
Special model
p. 194
Digital output
Supply voltage 9-32 V DC
Current carrying capacity Direction signal 150 mA
Zero position signal 500 mA
Mounting depth A 85 mm
Wiring Cable 500mm long without plug connector
Optional with plug connector (standard plug connectors see page 125) S
2 direction signals + 1 zero position signal (Galvanically isolated) per axis
2 axis E001 2
Technical details may vary based on configuration or application! Technical data subject to change without notice!
44
Double-Handle Controller
D85
Voltage output
Mounting depth A 85 mm
Optional with plug connector (standard plug connectors see page 125) S
0,5...2,5...4,5 V redundant + 2 direction signals + 1 zero position signal (galvanically isolated) per axis
2 axis E112 2
0...5...10 V redundant + 2 direction signals + 1 zero position signal (galvanically isolated) per axis, supply voltage 11,5 - 32 V DC
2 axis E132 2
10...0...10 V + 2 direction signals + 1 zero position signal (galvanically isolated) per axis, supply voltage 11,5 - 32 V DC, sensor redundant
2 axis E136 2
+10...0...-10 V + 2 direction signals + 1 zero position signal (galvanically isolated) per axis, supply voltage 11,5 - 32 V DC, sensor redundant
2 axis E138 2
Output options
Characteristic:
Inverse dual *1 1
Dual *1 2
Single *2 5
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
45
Double-Handle Controller
D85
Current output
Mounting depth A 85 mm
Optional with plug connector (standard plug connectors see page 125) S
0...10...20 mA + 2 direction signals + 1 zero position signal (galvanically isolated) per axis, sensor redundant with error monitoring signal
2 axis E206 2
20...0...20 mA + 2 direction signals + 1 zero position signal (galvanically isolated) per axis, sensor redundant with error monitoring
2 axis E208 2
4...12...20 mA + 2 direction signals + 1 zero position signal (galvanically isolated) per axis, sensor redundant with error monitoring
2 axis E214 2
20...4...20 mA + 2 direction signals + 1 zero position signal (galvanically isolated) per axis, sensor redundant with error monitoring
2 axis E216 2
+20...0...-20 mA + 2 direction signals + 1 zero position signal (galvanically isolated) per axis, sensor redundant with error monitoring
2 axis E226 2
Output options
Single 5
CAN
External digital output for LEDs 5-30 mA (dependent on the number of LEDs)
E3091X: 105 mm
Wiring CAN (IN) cable 300 mm with plug connector M12 (male)
External in-/outputs cable 300 mm without plug connector (additionally from 32 in-/outputs)
Technical details may vary based on configuration or application! Technical data subject to change without notice!
46
Double-Handle Controller
D85
Optional with plug connector (standard plug connectors see page 125) S
- 7 analoge Joystickachsen
- 16 digitale Joystickfunktionen
- 8 external LED-outputs (dimmable optional), 1 switching output (potential-free, 100 mA), 8 external digital inputs 2
- 16 external LED-outputs (dimmable optional), 1 switching output (potential-free, 100 mA), 16* external digital inputs 3
*With the use of capacitive sensor, the external digital inputs reduce by one input!
- 8 external LED-outputs (dimmable optional), 1 switching output (potential-free, 100 mA), 8 external digital inputs 2
- 16 external LED-outputs (dimmable optional), 1 switching output (potential-free, 100 mA), 16* external digital inputs 3
- 24 external LED-outputs (dimmable optional), 1 switching output (potential-free, 100 mA), 24 external digital inputs 4
- 32 external LED-outputs (dimmable optional), 1 switching output (potential-free, 100 mA), 32* external digital inputs 5
*With the use of capacitive sensor, the external digital inputs reduce by one input!
Main-axis with additional digital-/analog outputs separately wired (not via CAN)
CANopen Safety
External digital output for LEDs 5-30 mA (depending on the number of LEDs)
E4091X: 105 mm
Wiring CAN (IN) cable 300 mm with plug connector M12 (male)
External in-/outputs cable 300 mm without plug connector (additionally from 32 in-/outputs)
Technical details may vary based on configuration or application! Technical data subject to change without notice!
47
Double-Handle Controller
D85
Optional with plug connector (standard plug connectors see page 125) S
- 8 external LED-outputs (dimmable optional), 1 switching output (potential-free, 100 mA), 8 external digital inputs 2
- 16 external LED-outputs (dimmable optional), 1 switching output (potential-free, 100 mA), 16* external digital inputs 3
*With the use of capacitive sensor, the external digital inputs reduce by one input!
- 8 external LED-outputs (dimmable optional), 1 switching output (potential-free, 100 mA), 8 external digital inputs 2
- 16 external LED-outputs (dimmable optional), 1 switching output (potential-free, 100 mA), 16* external digital inputs 3
- 24 external LED-outputs (dimmable optional), 1 switching output (potential-free, 100 mA), 24 external digital inputs 4
- 32 external LED-outputs (dimmable optional), 1 switching output (potential-free, 100 mA), 32* external digital inputs 5
*With the use of capacitive sensor, the external digital inputs reduce by one input!
Main-axis with additional digital-/analog outputs separately wired (not via CAN)
Profibus DP
Supply voltage (if applicable contact wiring) cable 12 x 0,25 mm² 300 mm long without plug connector
Optional with plug connector (standard plug connectors see page 125) S
Profibus DP E501 1
Technical details may vary based on configuration or application! Technical data subject to change without notice!
48
Double-Handle Controller
D85
Profinet
Verdrahtung Profinet (1), cable 300 mm with M12 plug connector (female)
Supply voltage (if applicable contact wiring) cable 12 x 0,25 mm2 300 mm long without plug connector)
Optional with plug connector (standard plug connectors see page 125) S
Profinet E603 1
PROFIsafe
Wiring Profinet (1), cable 300 mm with M12 plug connector (female)
Supply voltage (if applicable contact wiring) cable 12 x 0,25 mm2 300 mm long without plug connector
Optional with plug connector (standard plug connectors see page 125) S
PROFIsafe E703 1
Main-axis with additional signals separately wired (not via profinet safe)
Technical details may vary based on configuration or application! Technical data subject to change without notice!
49
Double-Handle Controller
D85
PWM Outputs
PWM-frequency: 1225 Hz
Mounting depth A 85 mm
Cable 3 (Creep speed / dead man) 14 x 0,25 mm2 300mm long without plug
Optional with plug connector (standard plug connectors see page 125) S
PWM Output 0-3 A for 2 proportional valve magnets per axis 2 axis E801 2
Other outputs
Optional with plug connector (standard plug connectors see page 125) S
2 axis E907 2
8 Bit Gray-Code with direction signals per main-axis, supply voltage 9-36 V DC
Wiring: Cable 37 x 0,14 mm2 300 mm long without plug connector (axis 1+2)
Optional with plug connector (standard plug connectors see page 125) S
2 axis E903 2
8 Bit Binär-Code with direction signals per main-axis, supply voltage 9-36 V DC
Wiring: Cable 37 x 0,14 mm2 300 mm long without plug connector (axis 1+2)
Optional with plug connector (standard plug connectors see page 125) S
2 axis E904 2
Attachments
Z01 Mating connector (CAN) M12 (male insert) with 2 m cable 20201140
Z02 Mating connector (CAN) M12 (female contact) with 2 m cable 20202298
Z05 Mating connector (Profinet) M12 (male insert) with 2 m cable 5300000222
Technical details may vary based on configuration or application! Technical data subject to change without notice!
50
Double-Handle Controller
D85
1 / D85
123
42
T
H
28
160
160
To build in:
Direction 1-2
Direction 3-4
10,5
Cover plate
(According
to board)
A
A
90
(Cover housing)
30°
100
30°
30°
175
3
12
Hole pattern
M6
92
76,5
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
51
Multi-Axis Controller
V28
The V28 is a compact joystick commonly used in electro-hydraulic applications. Long life and
high reliability is ensured by the latest contactless hall-technology. With many outputs and grip
options the V28 series is hugely customisable.
Technical data
Example
V28 P GS9 -Z -B10 -E... -S... -X
Basic unit
Gate
P Cross gate
GS9-D Hall-twist grip with spring return and push button on top
Z Spring return
Degree of protection
B11 Joystick-main board sealed and grip function sealed, grip with drain hole
E3xx CAN-interface
Plug connectors
Special model
Technical details may vary based on configuration or application! Technical data subject to change without notice!
52
Multi-Axis Controller
V28
Mounting depth A 35 mm
2. cable 14 x 0,25 mm2 (optional for grip function) 500 mm long without plug connector
Optional with plug connector (standard plug connectors see page 125) S
2 axis 2
1 axis E104 1
2 axis 2
Output options
Characteristic:
Inverse dual 1
Dual 2
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
53
Multi-Axis Controller
V28
Voltage output
Mounting depth A 35 mm
2. cable 14 x 0,25 mm2 (optional for grip function) 500 mm long without plug connector
Optional with plug connector (standard plug connectors see page 125) S
0,5...2,5...4,5 V redundant + 2 direction signals + 1 zero position signal (galvanically isolated) per axis
1 axis E112 1
2 axis 2
3 axis* 3
0...5...10 V 2 direction signals + 1 zero position signal (galvanically isolated) per axis, supply voltage 11,5 - 32 V DC
1 axis E132 1
2 axis 2
3 axis* 3
10...0...10 V + 2 direction signals + 1 zero position signal (galvanically isolated) per axis, supply voltage 11,5 - 32 V DC,
1 axis E136 1
2 axis 2
3 axis* 3
Output options
Characteristic:
Inverse dual *1 1
Dual *1 2
Single *2 5
*Axis for grip functions, interface can vary depending upon actuation element!
Technical details may vary based on configuration or application! Technical data subject to change without notice!
54
Multi-Axis Controller
V28
Current output
Mounting depth A 35 mm
2. cable 14 x 0,25 mm2 (optional for grip function) 500 mm long without plug connector
Optional with plug connector (standard plug connectors see page 125) S
0...10...20 mA + 2 direction signals + 1 zero position signal (galvanically isolated) per axis, sensor redundant with error monitoring
1 axis E206 1
2 axis 2
3 axis* 3
20...0...20 mA + 2 direction signals + 1 zero position signal (galvanically isolated) per axis, sensor redundant with error monitoring
1 axis E208 1
2 axis 2
3 axis* 3
1 axis E209 1
2 axis 2
3 axis* 3
20...4...20 mA + 2 direction signals + 1 zero position signal (galvanically isolated) per axis, sensor redundant with error monitoring
1 axis E216 1
2 axis 2
3 axis* 3
Output options
Single 5
*Axis for grip functions, interface can vary depending upon actuation element!
V28.1 V28
1 1
3 4
2 2
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
55
Multi-Axis Controller
V28
CAN
Current carrying capacity External digital output for LEDs 5 mA - 30 mA (dependent on the number of LEDs)
Mounting depth A 35 mm
Wiring CAN (IN) cable 300 mm with plug connector M12 (male)
Optional with plug connector (standard plug connectors see page 125) S
CAN E314 1
CANopen Safety
Current carrying capacity External digital output for LEDs 5 mA - 30 mA (dependent on the number of LEDs)
Mounting depth 35 mm
Wiring CAN (IN) cable 300 mm with plug connector M12 (male)
Optional with plug connector (standard plug connectors see page 125) S
Attachments
Technical details may vary based on configuration or application! Technical data subject to change without notice!
56
Multi-Axis Controller
V28
Standard
installed from the top
20° 20°
107
71,5
Cover plate
34,5
25
bedarf für
Kabel Recommended minimum
45,2 installation depth
for the cable outlet
3 4
67,5
2
56
53
38,4
hole pattern
R1
7,1 M3
15
Recommended minimum
installation depth
12,1
40
46,3
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
57
Single-Axis Controller
S26
The Single-Axis Controller S26 is a hall sensor switching device designed for electro-hydraulic
and remote controlled hydraulic. The modular design of the switching device is universally
applicable.
Technical data
Example
S26 T -Z - E... - S... -X
Basic unit
Knob
T Dead man
H Signal button
D Push button
Z Spring return
R Friction brake
Plug connectors
Special model
2
Technical details may vary based on configuration or application! Technical data subject to change without notice!
58
Single-Axis Controller
S26
Digital output
Supply voltage 9-32 V DC
Current carrying capacity Direction signal 150 mA
Zero position signal 500 mA
Wiring Cable 500 mm long without plug connector
Optional with plug connector (standard plug connectors see page 125) S
2 direction signals + 1 zero position signal (galvanically isolated)
1 axis E001 1
Characteristic:
Inverse dual 1
Dual 2
Voltage output
Supply voltage 9-32 V DC (*11,5-32 V)
Current carrying capacity Direction signal 150 mA
Zero position signal 500 mA
Wiring Cable 500 mm long without plug connector
Optional with plug connector (standard plug connectors see page 125) S
0,5...2,5...4,5 V redundant + 2 direction signals + 1 zero position signal (galvanically isolated)
1 axis E112 1
0...5...10 V redundant + 2 direction signals + 1 zero position signal (galvanically isolated), supply voltage 11,5 - 32 V DC
1 axis E132 1
10...0...10 V + 2 direction signals + 1 zero position signal (galvanically isolated), supply voltage 11,5 - 32 V DC, sensor redundant
with error monitoring and error signal
1 axis E136 1
Output options
Characteristic:
Inverse dual *1 1
Dual *1 2
Inverse dual with dead zone +/- 3° *1 (standard) 3
Dual with dead zone +/- 3° *1 4
*1 Not combinable with output E136X
Single *2 5
Single with dead zone *2 (standard) 6
*2 Not combinable with output E112X and E132X
Technical details may vary based on configuration or application! Technical data subject to change without notice!
59
Single-Axis Controller
S26
Current output
Supply voltage 9-32 V DC
Current carrying capacity Direction signal 150 mA
Zero position signal 500 mA
Wiring Cable 500 mm long without plug connector
Optional with plug connector (standard plug connectors see page 125) S
0...10...20 mA + 2 direction signals + 1 zero position signal (galvanically isolated), sensor redundant with error monitoring and error signal
1 axis E206 1
20...0...20 mA + 2 direction signals + 1 zero position signal (galvanically isolated), sensor redundant with error monitoring and error signal
1 axis E208 1
4...12...20 mA + 2 direction signals + 1 zero position signal (galvanically isolated), sensor redundant with error monitoring and error signal
1 axis E214 1
20...4...20 mA + 2 direction signals + 1 zero position signal (galvanically isolated), sensor redundant with error monitoring and error signal
1 axis E216 1
Output options
Single 5
Single with dead zone +/-3° (standard) 6
Technical details may vary based on configuration or application! Technical data subject to change without notice!
60
Single-Axis Controller
S26
1 / S26
H M 42
42
37,
50° 50°
37,
113,5
max. 4
Cover plate
74
70
45
Palm grip B5
22,50 B5 T = Dead man's button
35
58
80
145
5
M
Hole pattern
36,5 ±0,2
20,5
3,20
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
61
Multi-Axis Controller
V22
The V22 is a joystick commonly used in electro-hydraulic applications. Long life and high reliabi-
lity is ensured by the latest contactless hall-technology.
Technical data
Example
V22A -P D -E10321 -X
Basic unit
V22.1A Multi-Axis Controller, 1-axis with spring return, installation from below
V22A Multi-Axis Controller, 2-axis with spring return, installation from below
V22.1B Multi-Axis Controller, 1-axis with spring return, installation from top
V22B Multi-Axis Controller, 2-axis with spring return, installation from top
Gate
P Cross gate
PX Special gate
Grip
Knob (standard)
D Push button
GS9-D Hall-twist grip with spring return and push button on top
Interface
Voltage output
2 axis 2
Characteristic:
Dual 2
Special model
Attachments
Mating connector JST 8-pole with single wire 500 mm long 5300000261
Technical details may vary based on configuration or application! Technical data subject to change without notice!
62
Multi-Axis Controller
V22
1 / V22
49
max. 4
Cover plate IP 67
IP 00
Twist grip
28
with Push button
28,5
19 18
69,5
(installed from below)
2,7
30 52
37
V22B
Installed from the top
17
25° 25°
52
max. 4
Cover plate IP 67
IP 00
21
19 18
Hole pattern
(installed from the top)
M3
35
42 52
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
63
Single-Axis Controller
S11
The S11 is a one-axis joystick designed for electro-hydraulic and remote controlled hydraulic.
Long life and high reliability is ensured by the latest contactless hall-technology. The modular
design of the switching device is universally applicable.
Technical data
Example
S11 T -Z - E... - S... -X
Basic unit
Knob (standard)
T Dead man
D Push button
R Friction brake
Plug connectors
Special model
S11
Technical details may vary based on configuration or application! Technical data subject to change without notice!
64
Single-Axis Controller
S11
Digital Output
Optional with plug connector (standard plug connectors see page 125) S
1 axis E001 1
Optional with plug connector (standard plug connectors see page 125) S
1 axis E104 1
Output options
Characteristic:
Inverse dual 1
Dual 2
Voltage output
Supply voltage 9-32 V DC (*11,5-32 V)
Optional with plug connector (standard plug connectors see page 125) S
1 axis E112 1
0...5...10 V redundant + 2 direction signals + 1 zero position signal (galvanically isolated), supply voltage 11,5 - 32 V DC
1 axis E132 1
10...0...10 V + 2 direction signals + 1 zero position signal (galvanically isolated), supply voltage 11,5 - 32 V DC, sensor redundant
1 axis E136 1
Output options
Characteristic:
Inverse dual *1 1
Dual *1 2
Single *2 5
Technical details may vary based on configuration or application! Technical data subject to change without notice!
65
Single-Axis Controller
S11
Current output
Optional with plug connector (standard plug connectors see page 125) S
0...10...20 mA + 2 direction signals + 1 zero position signal (galvanically isolated), sensor redundant with error monitoring and error signal
1 axis E206 1
20...0...20 mA + 2 direction signals + 1 zero position signal (galvanically isolated), sensor redundant with error monitoring and error signal
1 axis E208 1
4...12...20 mA + 2 direction signals + 1 zero position signal (galvanically isolated), sensor redundant with error monitoring and error signal
1 axis E214 1
20...4...20 mA + 2 direction signals + 1 zero position signal (galvanically isolated), sensor redundant with error monitoring and error signal
1 axis E216 1
Output options
Single 5
Technical details may vary based on configuration or application! Technical data subject to change without notice!
66
Single-Axis Controller
S11
1 / S11
63
58
max. 2
Cover plate
IP 00
56,5
Electronic IP 67
44
58,1
52
Hole pattern
18,5 18,5
R1
4,5
20
20
12
5
4,
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
67
Multi-Axis Controller
V8 / VV8
The V8/VV8 is a robust joystick commonly used in electro-hydraulic applications. With many
output options including voltage, amperage and switch contacts and many grip options the
V8 / VV8 series is hugely customisable.
Technical data
Example
VV8 S5 P T -2RP +3ZP -B -A05 P184 +A050 P184 E9012 -X
Basic unit
VV8 Multi-Axis Controller 2-axis, reinforced version
Control-handle extended
Standard 160 mm*
S5 -20 mm
S8 +20 mm
*Only available in combination with a handle!
Gate
P Cross gate
PX Special gate
Axis 1
2 Contacts
R Friction brake
P Potentiometer
Axis 2
3 Contacts
Z Spring return
P Potentiometer
Cover housing
B Cover housing
Special model
X Special / customer specified
Technical details may vary based on configuration or application! Technical data subject to change without notice!
68
Multi-Axis Controller
V8 / VV8
Basic unit
V81 1-axis
V8 2-axis
reinforced version
VV81 1-axis
VV8 2-axis
Control-handle extended
S5 -20 mm
S8 +20 mm
Gate
P Cross gate
PX Special gate
T Dead man
H Signal button
D Push button
2 2 contacts e.g.
Z Spring return
69
Multi-Axis Controller
V8 / VV8
2 2 contacts e.g.
Z Spring return
Cover housing
B Cover housing
Interface
Potentiometer output
0,25...0,5...0,75 Us
1 1 axis
2 2 axis
3 3 axis
4 4 axis
Special model
Technical details may vary based on configuration or application! Technical data subject to change without notice!
70
Multi-Axis Controller
V8 / VV8
1 / 131
Palm grip B3
T = Dead man's button Knob solid
H = Signal button D= Push button
M = Latch for mechanical T MN for 3. Direction 11-12
zero interlock for 4. Direction 13-14
H M 42
MP
215
30°
30°
160
10,5
Cover plate
IP 00
(According to board)
A
90
(Cover housing)
Cable outlet
108,5
225
1
13
Hole pattern
M6
92
76,5
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
71
Multi-Axis Controller
V6 / VV6
The Multi-Axis Controller V6 / VV6 is a robust switching device designed for crane systems and
hoisting equipment. The modular design and the many possible combinations with our Palm
Grips make this joystick universally applicable.
Technical data
Example
V62L S5 P T -01 Z P +03A R C -A05 P134 +A110 C01 -X
Basic unit
Control-handle extended
S5 -20 mm
Gate
P Cross gate
T Dead man
Z Spring return
P Potentiometer
R Friction brake
C Opto-electronical encoder
Special model
Technical details may vary based on configuration or application! Technical data subject to change without notice!
72
Multi-Axis Controller
V6 / VV6
Basic unit
V61.1 1-axis
V64.1 1-axis 1 5
V62L 2-axis left
1-2
5-6
V62R 2-axis right
V64 2-axis
2 6
reinforced version
V61L/VV61L V61R/VV61R
VV61L 1-axis left
VV61.1 1-axis 1 5
VV64.1 1-axis
1-2
5-6
VV62L 2-axis left 3 4 7 8
VV62R 2-axis right
VV64 2 axis
2 6
3-4 7-8
V62L/VV62L V62R/VV62R
Control-handle extended
S3 -40 mm 1 1
S5 -20 mm
S8 +20 mm
PX Special gate 1
3 4
2
3-4
V64/VV64
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
73
Multi-Axis Controller
V6 / VV6
T Dead man
H Signal button
D Push button
Attention! When using some handles the deflection angle can be reduced to 28°!
02 4 contacts z.B.
A = silver contacts (4A 250V AC15) A99 contact - arrangement according customer request
Z Spring return
R Friction brake
Technical details may vary based on configuration or application! Technical data subject to change without notice!
74
Multi-Axis Controller
V6 / VV6
Axis 2: direction 3-4 left / Direction 7-8 right (not applicable for V/VV61, V/VV61.1, V/VV64.1)
02 4 contacts z.B.
A = Silver contacts (4A 250 V AC15) A99 contact - arrangement according customer request
Z Spring return
R Friction brake
Special model
Attachments
Indicating labels
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
75
Multi-Axis Controller
V6 / VV6
1 / 101
203
40°
40°
180
max. 4
Cover plate
10
IP 00
38 Palm grip B1
77
85
180
46 CAGE CLAMP®
connection
25 B
max. 2,5mm²
96
80
Palm grip B5
B
Potentiometer
155
T 396
30
OEC-mounting
80
Hole pattern
80
5
30 5,
No. of
Type Dim. A Dim. B
contacts
72
01 2 119 82
02 4 131 94
5
3,
03 6 144 107
30
04 8 156 119
05 10 169 132
06 12 181 144
Technical details may vary based on configuration or application! Technical data subject to change without notice!
76
Multi-Axis Controller
VA6
The Multi-Axis Controller VA6 is available in either single-axis or multi-axis options and is a
robust explosion proof controller commonly used in crane and hoisting applications. The modu-
lar design enables the switching device to be used universally.
Technical data
Identifications II 2G IIC T5 or T6
II 2D T85° or T95°C
Group of devices II
Example
VA62L S5 P T -01 Z P +03 R -A05 P144 +A110
Basic unit
Control-handle extended
S5 -20 mm
Gate
P Cross gate
T Dead man
01 2 contacts
Z Spring return
P Potentiometer
03 6 contacts
R Friction brake
Technical details may vary based on configuration or application! Technical data subject to change without notice!
77
Multi-Axis Controller
VA6
Basic unit
VA61.1 1-axis
1 5
VA62L 2-axis left
1-2
5-6
VA62R 2-axis right
Control-handle extended 2 6
VA61L VA61R
Standard 180 mm
S3 -40 mm 1 5
S5 -20 mm
1-2
5-6
S8 +20 mm
3 4 7 8
2 6
Gate
3-4 7-8
P Cross gate
VA62L VA62R
PX Special gate
1
H Signal button
D Push button
02 4 contacts z.B.
Z Spring return
R Friction brake
II 2G Ex d IIC T6 Gb
Connecting cable 6 m
Technical details may vary based on configuration or application! Technical data subject to change without notice!
78
Multi-Axis Controller
VA6
Axis 2: direction 3-4 left / Direction 7-8 right (Not applicable for VA61, VA61.1)
02 4 contacts z.B.
Z Spring return
R Friction brake
II 2G Ex d IIC T6 Gb
Connection cable 6 m
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
79
Multi-Axis Controller
VA6
1 / 105
Knob solid
T = Dead man's button D= Push button
H = Signal button
M = Latch for mechanical 42
zero interlock
40°
40°
180
max. 4
10
Cover plate
(Installation depth)
77
120
Potentionmeter
Potentiometer and
46 Microswitch IP 66
62 B
96
80
Hole pattern
80
5
30 5,
No. of
Type Dim. B
contacts
72
01 2 82
5 02 4 94
3,
03 6 107
30 04 8 119
05 10 132
06 12 144
Technical details may vary based on configuration or application! Technical data subject to change without notice!
80
Double-Handle Controller
D8
The Double-Handle Controller D8 is a robust switching device for electro hydraulic and the hois-
ting applications. The modular design enables the switching device to be used universally.
Technical data
Example
D8 S5 Q / Q -2ZP +3 RP -B -A05 P184 +A050 P184 -E9012 -S... -X
Basic unit
D8 Double-Handle Controller
Control-handle extended
S5 -20 mm
Cover housing
B Cover housing
Interface
E9012 Potentiometer output for proportional valve PVG32
Plug connector
V2023/1 01.01.2023
Special model
X Special / customer specified
Technical details may vary based on configuration or application! Technical data subject to change without notice!
81
Double-Handle Controller
D8
Basic unit
D8
S5 -20 mm 1 3
S8 +20 mm
T Dead man
H Signal button
D Push button
Q T-grip
Knob
T Dead man
H Signal button
D Push button
Q T-grip
2 2 contacts e.g.
3 3 contacts A98
A05
A050
Z Spring return
R Friction brake
Technical details may vary based on configuration or application! Technical data subject to change without notice!
82
Double-Handle Controller
D8
S. 194
2 2 contacts e.g.
3 3 contacts A98
A05
A050
Z Spring return
R Friction brake
Cover housing
B Cover housing
Schnittstelle
2 2 axis
Special model
Technical details may vary based on configuration or application! Technical data subject to change without notice!
83
Double-Handle Controller
D8
1 / 163
T
H M
28
160
160
To build in:
Direction 1-2
Direction 3-4
10,5
Cover plate
IP 54
IP 00
(According to board)
A
90 Cable outlet
(Cover housing)
30°
30°
100
30°
30°
3
12
Hole pattern
M6
92
76,5
Technical details may vary based on configuration or application! Technical data subject to change without notice!
84
Double-Handle Controller
D64 / DD64
The Double-Handle Controller D64/DD64 is a robust controller used commonly in crane and
hoisting applications. The modular design enables the switching device to be used universally.
Technical data
Example
D64 S5 Q / Q -01 Z P +03A R C -A05 P134 +A110 C01 -X
Basic unit
Control-handle extended
S5 -20 mm
Q T-grip
Q T-grip
Z Spring return
P Potentiometer
R Friction brake
C Opto-electronical encoder
Special model
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
85
Double-Handle Controller
D64 / DD64
S. 194
Basic unit
DD64
1 3
Control-handle long
S5 -20 mm
2 4
S8 +20 mm
3-4
*Only in combination with knob!
D64 / DD64
Grip- control handle left
Knob
T Dead man
H Signal button
D Push button
Q T-grip
Knob
T Dead man
H Signal button
D Push button
Q T-grip
Technical details may vary based on configuration or application! Technical data subject to change without notice!
86
Double-Handle Controller
D64 / DD64
Z Spring return
R Friction brake
(P) Mounting options for potentiometer and encoder (Gessmann-types)
P Potentiometer P131 T396 2 x 0,5 kOhm l max. 1 mA
P132 T396 2 x 1 kOhm l max. 1 mA
P133 T396 2 x 2 kOhm l max. 1 mA
P134 T396 2 x 5 kOhm l max. 1 mA
P135 T396 2 x 10 kOhm l max. 1 mA
More potentiometers on request!
Z Spring return
R Friction brake
(P) Mounting options for potentiometer and encoder (Gessmann-types)
P Potentiometer P131 T396 2 x 0,5 kOhm l max. 1 mA
P132 T396 2 x 1 kOhm l max. 1 mA
P133 T396 2 x 2 kOhm l max. 1 mA
P134 T396 2 x 5 kOhm l max. 1 mA
P135 T396 2 x 10 kOhm l max. 1 mA
More potentiometers on request!
Special model
X Special / customer specified
V2023/1 01.01.2023
Attachments
Indicating labels
Indicating labels engraved
Technical details may vary based on configuration or application! Technical data subject to change without notice!
87
Double-Handle Controller
D64 / DD64
1 / 161
T MN
H M
28
MP
180
180
To build in:
Direction 1-2
Direction 3-4
Cover plate
IP 00
max. 4
77
CAGE CLAMP®
connection
max. 2,5mm²
Potentiometer
25
T 396
80
92
96
80
40°
40°
40°
40°
B
30
OEC-mounting
80
Hole pattern
80 No. of
Type Dim. A Dim. B
5,5 contacts
01 2 119 82
80 02 4 131 94
03 6 144 107
04 8 156 119
05 10 169 132
06 12 181 144
Technical details may vary based on configuration or application! Technical data subject to change without notice!
88
Multi-Axis Controller
V11
The Multi-Axis Controller V11 is a robust switching device for crane and hoisting applications.
The modular design enables the switching device to be used universally.
Technical data
Example
V11L S5 P T -01 Z P +03A R -A05 P324 +A110 -X
Basic unit
Control-handle extended
S5 -20 mm
Gate
P Cross gate
T Dead man
Z Spring return
P Potentiometer
R Friction brake
Special model
Technical details may vary based on configuration or application! Technical data subject to change without notice!
89
Multi-Axis Controller
V11
3 4
Control-handle extended
Gate
P Cross gate
PX Special gate
T Dead man
H Signal button
D Push button
Technical details may vary based on configuration or application! Technical data subject to change without notice!
90
Multi-Axis Controller
V11
02 4 contacts e.g.
A05 MS21
A0500 MS21-00
A110 MS24-0
A = Silver contacts (4A 250 V AC15) A99 contact - arrangement according customer request
Z Spring return
R Friction brake
Axis 2: direction 3-4 left / direction 7-8 right (not applied for V11.1)
01 2 contacts (2A 250V AC15) Standard contact - arrangement see page 127
A05 MS21
A0500 MS21-00
A110 MS24-0
A = Silver contacts (4A 250 V AC15) A99 contact - arrangement according customer request
Z Spring return
R Friction brake
Special model
Attachments
V2023/1 01.01.2023
Indicating labels
Technical details may vary based on configuration or application! Technical data subject to change without notice!
91
Multi-Axis Controller
V11
1 / 111
180
36° 36°
120
max. 3
Cover plate
IP 00
55
80
135
Potentiometer T365
Opto-
CAGE CLAMP® connection electronical
max. 2,5mm² encoder OEC 2
B B
78
B
86
78 B
70
Hole pattern
5
58 ±0,1
70
No. of
Type Dim. B
contacts
01 2 51
02 4 64
03 6 76
Technical details may vary based on configuration or application! Technical data subject to change without notice!
92
Multi-Axis Controller
V14
The V14 is a robust switching device for remote control and electro-hydraulic applications.
Due to its modular design, this control unit can be used universally. The integrated sensor sys-
tem has signal and potentiometer tracks in conductive plastic technology. Switching contacts
are also available as an option.
Technical data
Example
V14L S8 P T -01 Z C +03 R -A05 C61 +A110 -X
Basic unit
Control-handle extended
Standard 60 mm**
S8 +20 mm
Gate
P Cross gate
T Dead man
Z Spring return
C Mechanical encoder
R Friction brake
Special model
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
93
Multi-Axis Controller
V14
189
202
p. 205 191
200
p. 207 188
176
p. 193 56
57
p. 66 168
167
p. 185
Basic unit
Control-handle extended
3 4
Standard 60 mm*
S8 +20 mm 2
2
*Only available in combination with a handle!
P Cross gate
PX Special gate 5 5
H Signal button
GK1 Knob 42 mm
GS9-D Hall-twist grip with spring return and push button on top
B... Palm Grip B... (see page Palm Grip page 161)
*Attention! The Multi-Axis Controller V14 is not suitable for large Palm Grips (B3, B7/B8, B9...)
Technical details may vary based on configuration or application! Technical data subject to change without notice!
94
Multi-Axis Controller
V14
R Friction brake
EA/02-10 l max. 1 mA
EA/10-10 l max. 1 mA
Axis 2: direction 3-4 left / direction 7-8 right (Not applied for V14.1L and V14.1R)
Special model
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
95
Multi-Axis Controller
V14
1 / 143
40°
40°
40° Knob solid GK 40°
for MN, MP
42
71
60
max. 4
Cover plate
IP 00
8
Mechanical Twist grip
encoder
56
28,5
32
50
Twist grip
with Push button
28,5
40
54
52
37,5
B
Hole pattern
3,5
40
No. of
Type Dim. B
contacts
01 2 36
51 02 4 45
03 6 54
Technical details may vary based on configuration or application! Technical data subject to change without notice!
96
Single-Axis Controller
S14
The S14 is a compact single-axis joystick designed for remote control and electrohydraulic
applications. Due to its modular design, this control unit can be used universally. The integrated
sensor system has signal and potentiometer tracks in conductive plastic technology. Optionaly
switch contacts are also available.
Technical data
Example
S14L S8 T -01ZC -A05 C61 -X
Basic unit
S14L Single-Axis Controller
Control-handle extended
Standard 60 mm*
S8 +20 mm
*Only possible in combination with handle!
Special model
X Special / customer specified
Basic unit
S14L 1-axis left
S14R 1-axis right
Control-handle extended
Standard 60 mm* Identification of the installation
S8 +20 mm variants with switching directions:
*Only possible in combination with handle!
1
Grip / Palm Grip
Knob (standard)
M Mechanical zero interlock
MH Mechanical zero interlock + signal contact
T Dead man
2
V2023/1 01.01.2023
S14
H Signal button
GK1 Knob 42 mm
GK1M Mechanical zero interlock
Technical details may vary based on configuration or application! Technical data subject to change without notice!
97
Single-Axis Controller
S14
GS9-D Hall-twist grip with spring return and push button on top
02 4 contacts z.B.
A0500 MS21-00
A110 MS24-0
R Friction brake
EA/02-10 l max. 1 mA
EA/10-10 l max. 1 mA
Special model
Technical details may vary based on configuration or application! Technical data subject to change without notice!
98
Single-Axis Controller
S14
1 / 189
25 Knob solid GK
T = Dead man's button for MN, MP
H = Signal button
M = Latch for mechanical T 42
zero interlock
H M
40°
40°
40
60
K
max 4
for
Cover plate Twist grip
28,5
IP 00
Mechanical
encoder
32
8
56
26
B 28 Twist grip 50
with Push button
65
CAGE CLAMP® connection 28,5
max. 1,5mm²
37,5
52
54
Hole pattern
16
3,5
38
40
20
No. of
Type Dim. B
contacts
01 2 24
02 4 33
03 6 42
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
99
Single-Axis Controller
S2 / SS2 / S21
The Single-Axis Controller S2 / SS2 / S21 is a robust switching device for remote controlled
and electrohydraulic applications. The modular design of the switching device is universally
applicable.
Technical data
Example
S2L S5 T - 02 Z P - A050 P134 -X
Basic unit
S2L Single-Axis Controller left
Control-handle extended
S5 -20 mm
Special model
X Special / customer specified
Basic unit
S2L Single-Axis Controller left
S2R Single-Axis Controller right
S21L Single-Axis Controller left with flange 96 x 96 mm
S21R Single-Axis Controller right with flange 96 x 96 mm Identification of the installation variants
Control-handle extended 2 6
Standard
S5 -20 mm
S8 +20 mm
Technical details may vary based on configuration or application! Technical data subject to change without notice!
100
Single-Axis Controller
S2 / SS2 / S21
Combination possibilities with our handles (valid for Single-Axis Controller S21)
B1 B5 B6 B10 B22 B24 B28 B33
Z Spring return
R Friction brake
(P) Possibility of mounting potentiometer and encoder (Gessmann-types)
P Potentiometer P131 T396 2 x 0,5 kOhm l max. 1 mA
P132 T396 2 x 1 kOhm l max. 1 mA
P133 T396 2 x 2 kOhm l max. 1 mA
P134 T396 2 x 5 kOhm l max. 1 mA
P135 T396 2 x 10 kOhm l max. 1 mA
More potentiometers on request!
Special model
X Special / customer specified
X1 Microswitch (MZT 1) positively driven NC contact
V2023/1 01.01.2023
Attachments
Indicating labels
Indicating labels with engraving
Technical details may vary based on configuration or application! Technical data subject to change without notice!
101
Single-Axis Controller
S2 / SS2
1 / 201
H M 42 42
5° 37
,5°
37,
120
max. 4
Cover plate
88
Potentiometer
T 396
24 21 14
Palm grip B5
B5 T = Dead man's button
B 35
45
58
80
90
145
5
M
Hole pattern
36,5 ±0,2
20,5
3,20 No. of
Type Maß B
contacts
02 3 25
03 5 31
04 7 36
05 9 42
Technical details may vary based on configuration or application! Technical data subject to change without notice!
102
Single-Axis Controller
S21
1 / 203
H M 42 42
5° 37
37, ,5°
120
max. 4
Cover plate
IP 00
90
Potentiometer
T 396
24 28 18
Palm grip B5
B5 T = Dead man's button
35
B
96
90
145
Hole pattern
80
30
5,50
72
No. of
0
Type Maß B
5
contacts
3,
02 3 62
30 03 5 72
04 7 83
05 9 93
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
103
Single-Axis Controller
S22 / SS22
The Single-Axis Controller S22 / SS22 is a robust switching device for remote controlled and
electrohydraulic applications. The modular design of the switching device is universally applica-
ble.
Technical data
Example
S22L S5 T -3ZP - A050 P134 -X
Basic unit
Control-handle extended
S5 -20 mm
T Dead man
Z Spring return
P Potentiometer
Special model
Basic unit
Reinforced version
S22L / SS22L S22R / SS22R
SS22L Single-Axis Controller left 1 5
SS22R Single-Axis Controller right
5-6
1-2
Control-handle extended
2 6
Standard
S5 -20 mm
S8 +20 mm
Technical details may vary based on configuration or application! Technical data subject to change without notice!
104
Single-Axis Controller
S22 / SS22
Knob (standard)
T Dead man
H Signal button
D Push button
2 2 contacts z.B.
A0500 MS21-00
Z Spring return
R Friction brake
Special model
Attachments
V2023/1 01.01.2023
Indicating labels
Technical details may vary based on configuration or application! Technical data subject to change without notice!
105
Single-Axis Controller
S22 / SS22
1 / 201
H M 42 42
5° 37
,5°
37,
120
max. 4
Cover plate
88
Potentiometer
T 396
24 21 14
Palm grip B5
B5 T = Dead man's button
B 35
45
58
80
90
145
5
M
Hole pattern
36,5 ±0,2
20,5
3,20 No. of
Type Maß B
contacts
02 3 25
03 5 31
04 7 36
05 9 42
Technical details may vary based on configuration or application! Technical data subject to change without notice!
106
Multi-Axis Controller
V23
The V23 is a switching device for remote control applications. The integrated sensor system has
signal and potentiometer tracks in conductive plastic technology. Detent points are optionally
selectable. Due to its small dimensions it can be optimally integrated into small remote control
housings.
Technical data
Example
V23A -P -C80 +C80 -X
Basic unit
V23.1A Multi-Axis Controller 1-axis with spring return, installation from below
V23A Multi-Axis Controller 2-axis with spring return, installation from below
V23.1B Multi-Axis Controller 1-axis with spring return, installation from top
V23B Multi-Axis Controller 2-axis with spring return, installation from top
Gate
P Cross gate
PX Special gate
MEC 3-1
EA/26-10 l max. 1 mA
Special model
Attachments
Mating connector JST 12-pole with single wire 500 mm long 5300000264
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
107
Multi-Axis Controller
V23
1 / V23
V23A 25° 17
Installed from below 25°
48,1
max. 4
Cover plate IP 67
IP 00
27,8
22,9 17,8
Hole pattern
(installed from below)
2,7
30
52
37
V23B 17
Installed from the top 25°
25°
51,1
max. 4
Cover plate IP 67
IP 00
24
22,9 18
Hole pattern
(installed from the top)
M3
40
55
50
Technical details may vary based on configuration or application! Technical data subject to change without notice!
108
Multi-Axis Controller
V20
The V20 is a rugged switching device for remote control. The integrated sensor technology has
signal and potentiometer tracks in conductive plastic technology. Detent points can be integra-
ted as an option.
Technical data
Example
Basic unit
V20.1 Multi-Axis Controller 1-axis with spring return
V20 Multi-Axis Controller 2-axis with spring return
V20.1A Multi-Axis Controller 1-axis with spring return, IP67 front
V20A Multi-Axis Controller 2-axis with spring return, IP67 front
Gate
p Cross gate
PX Special gate
Grip
Knob (standard)
D Push button
GS9 Hall-twist grip with spring return
GS9-D Hall-twist grip with spring return and push button on top
Cover housing
V2023/1 01.01.2023
Special model
X Special / customer specified
Technical details may vary based on configuration or application! Technical data subject to change without notice!
109
Multi-Axis Controller
V20
32
64
55
Cover plate
IP 00
33
27
Twist grip
with Push button
47
28,5
5,5
52
Board with solder
or plug terminal
55
1
37,5
3 4
2
V20 Degree of protection front IP 67
17 50
24° 24°
24° 24°
Cover plate
52
IP 67
IP 00
max. 3
27
41
33
47
Board with solder
or plug terminal
Hole pattern
51
+0,3
40
3,5
Technical details may vary based on configuration or application! Technical data subject to change without notice!
110
Single-Axis Controller
S1
The S1 is a one-axis joystick for remote control and eletro-hydraulic applications. The modular
design of the switching device is universally applicable.
Technical data
Example
S1 T -2ZP - A05 P374 -X
Basic unit
T Dead man
Z Spring return
P Potentiometer
Special model
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
111
Single-Axis Controller
S1
S1 T -2 Z P - A05 P374 -X
Basic unit
S1 1-axis
Knob (standard)
T Dead man
D Push button
S1 T -2 Z P - A05 P374 -X
2 2 contacts z.B.
A060 MS22-0
R Friction brake
S1 T -2 Z P - A05 P374 -X
Special model
Technical details may vary based on configuration or application! Technical data subject to change without notice!
112
Single-Axis Controller
S1
1 / 181
63
58
max. 2
Cover plate
IP 00
63,50
Potentiometer
T 375 / T 432
21 20 2 24
57
44
26
52
59
33
Hole pattern
18,5 18,5
R1
4,5
20
20
12
5
4,
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
113
Lever Switch
S51
The S51 lever switch series, specially developed for the rail sector, offers a high degree of ro-
bustness as well as a long service life. Typically, this high-quality product is found in driver's cab
consoles of rail traction units.
Technical data
S51 -1 -2 - 4G - MS20 - A 23 - A 24 - A 25 - A 26 -X
Montagering
1 Nature eloxed
2 Black eloxed
3 Stainless steel (Siemens Sirius Act Design) Grip shape K Grip shape M
Grip shape
1 Grip shape B
2 Grip shape W
3 Grip shape K
4 Grip shape K05
5 Grip shape M
6 Grip shape Z Grip shape K05 Grip shape W
Contacts
1 1 contact
2 2 contacts
3 3 contacts
4 4 contacts
5 5 contacts
6 6 contacts
S Silver contacts
G Gold contacts
ZS Positively driven NC silver contacts
ZG Positively driven NC gold contacts
114
Lever Switch
S51
S51 -1 -2 - 4G - MS20 - A 23 - A 24 - A 25 - A 26 -X
Detent
MS..
MS04 switch switch switch switch MS26 keys keys keys switch
MS06 switch switch locked locked MS28 keys switch switch switch
Basic position
MS11 keys keys locked locked MS33 locked switch switch locked
MS14 switch keys keys switch MS36 switch switch switch locked
MS15 locked locked keys switch MS37 locked switch keys keys
MS16 switch keys locked locked MS38 locked switch switch keys
MS17 locked switch switch switch MS39 switch keys switch switch
MS19 locked keys keys switch MS41 locked keys keys keys
MS21 locked switch without switch locked MS43 keys switch switch keys
*harder transition
Switching function:
+17° 0° -17°
+34° -34°
SR1 SR2
+17° 0° -17°
+34° -34°
Technical details may vary based on configuration or application! Technical data subject to change without notice!
115
Lever Switch
S51
S51 -1 -2 - 4G - MS20 - A 23 - A 24 - A 25 - A 26 -X
Contacts programming
A..
Programmnummer
Switching direction 1 Switching direction 2 Switching direction 1 Switching direction 2
Centre Centre
(SR1) (SR2) (SR1) (SR2)
2 1 0 1 2 2 1 0 1 2
-34° -17° 0° 17° 34° -34° -17° 0° 17° 34°
A01 X X A23 X
A02 X A24 X
A03 X A25 X
locked
A04
Schaltfunktionen:
X A26 X
A05 X X A27 X X
A06 X X A28 X X
A07 X X +17° 0° A29 -17° X X
A08 X A30 X X
+34° -34°
A09 X A31 X X
locked
A10 X A32 X X
A11 X X A33 X X X
A12 X X A34 X X X
A13 X X X X A35 X X X
A14 X A36 X X X
A15 XSR1 X X A37
SR2
X X X X
A16 X X X A38 X X X X
A17 X X A39 X X X
A18 X X A40 X X X
A19 X X A41 X X X X
A20 X X A42 X X X X
A21 X X X A43 X X X X
A22 X X X
Programming of contacts:
+17° 0° -17°
+34° -34°
SR1 SR2
Technical details may vary based on configuration or application! Technical data subject to change without notice!
116
Lever Switch
S51
34° 34°
14 10 grip B
cover plate
2 - 6 mm
7,8
35,4
IP 54
IP 20
80
36
74
20 20 25 20
20
7,8
min. 37,5
33,5
3,2
min. 75
18,5
33,5
Technical details may vary based on configuration or application! Technical data subject to change without notice!
117
Control-Switch
N6
The Control-Switch N6 is a rugged switching device for hoisting applications. The modular
design enables the switching device to be used universally. The N6 is resistant to oil, maritime
conditions e.g. offshore /vessels, UV radiation typically from the sun.
Technical data
Example
N6 -DG -01 Z P -A05 P134 -X
Basic unit
Grip
DG Twist grip
Z Spring return
P Potentiometer
Special model
Technical details may vary based on configuration or application! Technical data subject to change without notice!
118
Control-Switch
N6
Basic unit
Grip
KN Knob
HG Ball grip
DG Twist grip
02 4 contacts z.B.
A = Silver contacts (4A 250 V AC15) A99 contacts - arrangement according customer request
Z Spring return
R Friction brake
Special model
Attachments
Indicating label
Technical details may vary based on configuration or application! Technical data subject to change without notice!
119
Control-Switch
N6
1 / 231
25 45
64
21
44
IP 00
Cover plate 1...5
CAGE CLAMP®
connection max. 2,5mm²
25
Potentiometer
T 396 Rotary mechanism
50
48 33
44
88,5
79
71
Hole pattern
No. of Spring
Type Dim. A
48
contacts return
01 2 53
4,5
02 4 65
03 6 78
22,5 +25
04 8 90
05 10 103
06 12 115
Technical details may vary based on configuration or application! Technical data subject to change without notice!
120
Control-Switch
N9
The Control-Switch N9 is a rugged switching device for electrohydraulic and hoisting applica-
tions. The modular design enables the switching device to be used universally.
Technical data
Example
N9 -2 R P -A05 P134 -X
Basic unit
2 2 contacts z.B.
A98 MS0
A05 MS21
Special model
Technical details may vary based on configuration or application! Technical data subject to change without notice!
121
Control-Switch
N9
N9
38
30
27
Cover plate
max. 6
61
R33
,7
Hole pattern
30,50
Technical details may vary based on configuration or application! Technical data subject to change without notice!
122
Steering Column Switch
V23
The Steering Column Switch V23 is designed for mounting on a steering column.
Technical data
Example
V23S -D -F2 -2 +2 -X
Basic unit
Grip
2 2 contacts 1,5A 24 V DC
Special model
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
123
Steering Column Switch
V23
1 / Lenkstockschalter
80
81
Cover plate
Cover plate
max. 4
max. 4
IP 67
IP 00
30
29
optional with
KBQ2088 protective cover
IP 54
Hole pattern
5
3,
35
51,6
42
0
°
30
30°
Technical details may vary based on configuration or application! Technical data subject to change without notice!
124
Standard Plug Connector
Molex Micro-Fit 3.0 - Suited for conductor cross-section 0,1 til 0,75 mm2
Deutsch DTM - Suited for conductor cross-section 0,25 til 1,5 mm2
AMP CPC - Suited for conductor cross-section 0,12 til 1,5 mm2
AMP Mini-Universal MATE-N-LOK (sealed) - Suited for conductor cross-section 0,12 til 1,5 mm2
P pin S socket
Technical details may vary based on configuration or application! Technical data subject to change without notice!
125
Schematic description
of the protection class
Degree of protection
B11 Joystick-main circuit board grouted (IP67) and grip function sealed, grip with drain hole
Technical details may vary based on configuration or application! Technical data subject to change without notice!
126
Standard Contact-Arrangement
for master switch
Typ Form Typ Form
MS11 MS24
0 1 4 3 2 1 0 1 2 3 4
Micro change over
° °03
3 A01 °3 °03 contact for control
°5 °05 handle with dead
MS12 man`s button signal button
°2 °02 A11
0 1 2 push button
°3 °03 °4 °04
A02
° °02
2 °6 °06
MS13 MS214
0 1 2 3 2 4
4 3 2 1 0 1 2 3 4
°3 °03 °3 °03
°2 °02 A03 °5 °05
°4 °04 °2 °02
°20 020
°
1
MS14 A12
0 1 2 3 4 °4 °04
° °03
3 °40 040
°
° °02
2 °6 °06
A04 contact 5 05 = direction1/4/5/8
° °04
4 °60 060
° contact 3 03 = direction 2/3/6/7
°6 °06
MS224
4 3 2 1 0 1 2 3 4
MS21 1 5
1 0 1 °3 °03
°3 °03 °5 °05
A05 3 4 7 8
°5 °05 A13
°2 °02
°4 °04 2 6
MS22
2 1 0 1 2 left right
° °03 MS25
3 5 4 3 2 1 0 1 2 3 4 5
°5 °05 A06 °3 °03
Deflection directions designated
°2 °02 ° °05
5
DIN 15025
° °02
2
MS212 A14
2 1 0 1 2 ° °04
4
°3 °03 °6 °06
°5 °05 °8 °08
A07
°2 °02
° °04 MS26
4 6 5 4 3 2 1 0 1 2 3 4 5 6
°3 °03
MS222
2 1 0 1 2 °5 °05
°3 °03 °2 °02
°5 °05 ° °04 A15
A08 4
°7 °07 ° °06
6
°9 °09 ° °08
8
°10 010
°
MS23
3 2 1 0 1 2 3
°3 °03 MS0
1 0 1
°5 °05
A09 °1 °01 A98
°2 °02
°4 °04 Zero contact NC
MS213
3 2 1 0 1 2 3 0
°5 °05
Zero contact NO
° °02
2
A10
°20 020
° °10 010
° A...1
°4 °04
° 040
40 °
M
Poten-
A
tiome-
ter
S
MSP
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
127
Technical data
AC12 Control of resistive loads and solid state loads with isolation 1 1 0,9 1 1 0,9
alternating
by opto couplers control of a.c. electromagnetic loads (>
current
AC15 72VA) 10 1 0,3 1 1 0,3
I U lc Ur
— — t 0,95 — — t 0,95
le Ue le Ue
DC 12 Control of resistive loads and solid state loads with isolation 1 1 1 ms 1 1 1 ms
Direct
by opto couplers Control of d.c. electromagnets
current
DC 13 1 1 6∙P 1 1 6∙P
The value 6·P results from an empirical relationship with is found to represent most d.c. magnetic loads to an upper limit of P = 50 W viz
6·P = 300 ms. Loads having power consumption greater than 50 W are assumed to consist of smaller loads in parallel. Therefore 300 ms is to be an upper
limit, irrespective of the power consumption value.
Attach our V6 N6 VV6 V11 V5 VV5
switching device S6 DD64 S2-S23 SS2-SS21
N61 N62
Rated isolation voltage
250 250 250 250 250
Ui in Volt
Rated operational voltage
250 250 250 250 250
Ue in Volt
Rated operational current le
6 or 16 6 or 16 6 or 16 10 10
in Ampere AC 12
AC 15 2 4 2 4 2 4 2 2
DC 12 24 V 6 8 6 8 6 8 4 4
48 V 2 4 2 4 2 4 2 2
110 V 0,5 1 0,5 1 0,5 1 0,2 0,2
220 V 0,1 0,5 0,1 0,5 0,1 0,5 0,1 0,1
Contacts gold-coated 24 V 5 mA 5 mA 5 mA 5 mA 5 mA
DC 13 24 V 1 1 1 3 3
48 V 0,5 0,5 0,5 1,5 1,5
110 V 0,2 0,2 0,2 0,1 0,1
220 V 0,05 0,05 0,05 0,05 0,05
Short-circuit-protection in Ampere
6 16 6 16 6 16 10 10
Fuse 9L
6 16 6 16 6 16 10 10
Circuit-breaker G-characteristic
Terminal screws
Plug-in connector M 3,5 M 3,5 M 3,5 M 3,5 M3,5
CAGE CLAMP® connection is a
registered trademarkt of WAGO 2,5 mm2 2,5 mm2 2,5 mm2 6,3 x 0,8 6,3 x 0,8
Kontakttechnik GmbH Germany
Conductor sizes in mm2
1,5 1,5 1,5 1,5 1,5
finely stranded with end steeves
Mechanical life
in million (operation cycles) 10 20 10 6 10
max. switching frequency c/h 1000
Mechanical shock resistance
Shock-amplitude > 15 Shock duration 20 ms
IEC 68-2-27
Clearances and creepage distances Overvoltage category III pollution grade 3
IEC 947-1; 2.5.46.51
Technical details may vary based on configuration or application! Technical data subject to change without notice!
128
Technical data
Technical details may vary based on configuration or application! Technical data subject to change without notice!
129
Hall-Potentiometer
HG2
Technical data
Example
Basic unit
Operating distance
0-360° possible
0 No dead zone
Interface
E1491 1 0,5...2,5...4,5 V positive gradient clockwise (cw) with zero position signal Ub= 5 V DC
2 0,5...2,5...4,5 V positive gradient counter clockwise (ccw) with zero position signal Ub= 5 V DC
4 0,5...2,5...4,5 V positive gradient counter clockwise (ccw) with direction signals Ub= 5 V DC
Special model
Technical details may vary based on configuration or application! Technical data subject to change without notice!
130
Hall-Potentiometer
HG2
HG2A
counter
1 clockwise (CCW) clockwise (CW)
1,50
22,20
5
M9
15,20
1,5
0
1,50
6
7,90 10,30
32,20
HG2B counter
clockwise (CCW) clockwise (CW)
3
22,20
1,50
16,50
2,25
can be screwed with
45°
self-tapping screws
DIN7500 M2,5
10
1
6
1,60 14,40
26
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
131
Hall-Potentiometer
N10
The N10 is a Hall-Potentiometer for electrohydraulic and hoisting applications. Long life and
high reliability is ensured by the latest contactless hall-technology. Up to 18 detent points
can be integrated.
Technical data
Example
N10 -90 1 -6 -E14811 -X
Basic unit
Operating distance
270°
180°
90°
Detent
0 No dead zone
Interfaces
Voltage output
E1491 1 0,5...2,5...4,5 V positive gradient clockwise (cw) with zero position signal Ub= 5 V DC
2 0,5...2,5...4,5 V positive gradient counter clockwise (ccw) with zero position signal Ub= 5 V DC
4 0,5...2,5...4,5 V positive gradient counter clockwise (ccw) with direction signals Ub= 5 V DC
Special model
132
Hall-Potentiometer
N10
46,30
22,80
21 CCW CW
22,20
M12x1
21
Cover plate
max. 4
working area
U (V)
analog output 1
analog output 2
CCW -X 0 X CW
1 2
Befesti
Position of the shaft:
hole pattern CCW CW
12,2 ±0,1
detent in 1
figure -90°
detent in 2
figure +90°
2,10
45
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
133
Potentiometer
with attach to our switching device
Hall 0,5...2,5...4,5 V /
2 x 10 kOhm
Imax wiper (mA)
2 x 1 kOhm
2 x 2 kOhm
2 x 5 kOhm
Capacity (W)
Expansion
Part No.
for mounting
Typ
Typ
on 1 2 3 4 5 Comment
V6 / VV6 T1420 1,5 10 P44 ☐ x x x x x 524004400 ☐
D64 / DD64
V5 / VV5 T132 2,5 10 P05 ☐ x x x x x 524000500 ☐
V3
T132 Öl 2,5 10 P06 ☐ x x x x 524000600 ☐
S2 / SS2
S6 T178 1,5 10 P07 ☐ x x x 524000700 ☐ characteristic progressive
N6
P7 T238 1 10 P08 ☐ x x x x x*1 524000800 ☐ *¹ R= 2 x 6,5 kOhm
P8
T133 60 85 P10 ☐ x 524001000 ☐
T396 0,5 1 P13 ☐ x x x x x 524001300 ☐
T1350 Ex 0,5 1 P14 ☐ x x x x x 524001400 ☐
T1360 P43 x 5240043009
D3
S3
T318 0,5 1 P48 ☐ x 524004800 ☐
0,5 kOhm
10 kOhm
1 kOhm
2 kOhm
5 kOhm
Capacity (W)
Expansion
No.
Part No.
for mounting
Typ
Typ
on 1 2 3 4 5 Commend
V6 / VV6 T1491 1,5 10 P46 ☐ x x x x x 524004600 ☐
D64 / DD64
V5 / VV5 T131 2,5 10 P03 ☐ x x x x x 524000300 ☐
V3
T131 Oil 2,5 10 P04 ☐ x x x 524000400 ☐
S2 / SS2
S6 T134 60 85 P11 ☐ x 524001100 ☐
N6
P7 / P8 T374 0,5 1 P12 ☐ x x x x x 524001200 ☐
V10 / S1
Palm grip
T337 0,5 1 P26 ☐ x x x x 524002600 ☐
134
Opto-Electronic Encoder
OEC 2
Digital output 8 Bit Gray-Code T359 Output characteristic linear OEC 2-1-1 C01 410 g
8 Bit Binary-Code T359 Output characteristic linear OEC 2-2-1 C02 410 g
6 Bit Gray-Code T359 Output characteristic linear OEC 2-3-1 C031 410 g
6 Bit Gray-Code T359 Output characteristic quadratic OEC 2-3-2 C032 410 g
6 Bit Binary-Code T359 Output characteristic linear OEC 2-4-1 C041 410 g
6 Bit Binary-Code T359 Output characteristic quadratic OEC 2-4-2 C042 410 g
9 Bit Gray-Code T384 Output characteristic linear one side clockwise OEC 2-5-4 C054 410 g
9 Bit Gray-Code T384 Output characteristic linear one side anticlockwise OEC 2-5-5 C055 410 g
9 Bit Binary-Code T384 Output characteristic linear one side clockwise OEC 2-6-4 C064 410 g
9 Bit Binary-Code T384 Output characteristic linear one side anticlockwise OEC 2-6-5 C065 410 g
Technical details may vary based on configuration or application! Technical data subject to change without notice!
135
Opto-Electronic Encoder
OEC 2
Power supply 18 - 30 V DC
Voltage output 10...0...10 V T366 Output characteristic linear OEC 2-3-1-1 C111 410 g
Voltage output
1 Not connected -
2 Not connected -
3 Not connected -
4 Not connected -
5 Not connected -
6 Not connected -
7 Not connected -
8 Housing 0V blue
10 Not connected -
14 Not connected -
15 Not connected -
zero-point adjustable
Technical details may vary based on configuration or application! Technical data subject to change without notice!
136
Opto-Electronic Encoder
OEC 2
Power supply 18 - 30 V DC
Output current 20...4...20 mA T368 Output characteristic linear OEC 2-3-1-5 C191 410 g
Attachment
Plug with cable 14 x 0,25 mm2, 2000 mm long, cable head open (for OEC 2 with digital outputs) 5300000495
Plug with cable 7 x 0,34 mm2, 2000 mm long, cable head open (for OEC 2 with analog outputs) 5300000496
V2023/1 01.01.2023
The OEC 2 is able for mounting on V6,VV6/D64,DD64/V11/S2,SS2/S6/N6. For mounting a potentiometer mounting option (P)
of the respective controller is required!
Technical details may vary based on configuration or application! Technical data subject to change without notice!
137
Opto-Electronic Encoder
OEC 4
with interface Profibus DP
Opto-elecetronic encoder
Power supply 18 - 30 V DC
Voltage output 8 Bit Gray-Code T496 linear OEC 4-1-1-2 C27 820 g
9 Bit Gray-Code T497 linear one sided right turn OEC 4-5-4-2 C314 820 g
9 Bit Gray-Code T497 linear one sided left turn OEC 4-5-5-2 C315 820 g
9 Bit Binary-Code T497 linear one sided right turn OEC 4-6-4-2 C324 820 g
9 Bit Binary-Code T497 linear one sided left turn OEC 4-6-5-2 C325 820 g
zero-point adjustable
Attachment
X1 Plug (Profibus) straight
X1 Plug (Profibus) 90° angled
X2 Plug with cable 2 x 0,25 mm2, 2000 mm long, cable head open (cable for current supply OEC 4 single application)
X2 Connecting cable OEC 4/ OEC 2 (14 x 0,25 mm2) with 2 plug connectors incl. cable for current supply (2 x 0,25 mm2 2000 mm long,
cable head open)
The OEC 4 is able for mounting on V6,VV6/D64,DD64/V11/S2,SS2/S6/N6. For mounting a potentiometer mounting option (P)
of the respective controller is required! For a controller with one axis is required 1 piece of OEC 4, for a controller with 2 axis are required 1
piece of OEC 4 and 1 piece of OEC 2.
Technical details may vary based on configuration or application! Technical data subject to change without notice!
138
Opto-Electronic Encoder
OEC 2, OEC 4
OEC 2
20
6
4,5
30,5
26
80
1 3
36
49,5
2,4
OEC 4
41,5 12 counter
clockwise (CCW) clockwise (CW)
3
80
3
35 35
4,2
20
30,5
6
26
80
36
49,5
2,4
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
139
Electronic Control Unit
ES/43
The Electronic Control Unit ES/43 serves for control of proportional valves without position
control. There is a version for 4 proportional valve solenoids (ES / 43-10) and a version for 2
Proportional valve solenoids (ES / 43-11) available.
Features:
- Stabailized voltage
- Chopper output stage with adjustable frequency
- Ramp time setting ON/OFF delay
- Creep speed circuit adjustable
- Solenoid current setting separate for minimum current and maximum current
- Output current controlled independently of temperature and solenoid
- Power output short-circuit-proof with overload protection
- Voltage input protected against polarity reversal
- Mechanical selection of direction by means of contacts
- LED operating voltage and working display
- Microprocessor technology therefore especially adaptable
Technical data:
Example
- Supply voltage 10... 32 V DC
- Residual ripple 20%
- Control voltage range Ue 0... 5V
- Control current le < 1mA
- Dither frequency f 25... 250Hz
- Proportional valve S 1-4 I min. 0... 1A
Output I max. = I min ... 2A at 12 Volt
Output I max. = I min ... 1A at 24 Volt
- Ramp time setting t on 0,2... 25 sec
t off 0,2... 25 sec
- Creep speed variable reduction 25...75%
- Operating temperature -40°C to +85°C
- Storage temperature -40°C to +80°C
Technical details may vary based on configuration or application! Technical data subject to change without notice!
140
Electronic Control Unit
ES/43
3 / 503
ES / 43-10
4 Proportional valves-solenoid
9 10 11 12 13 14
Supply voltage 10 .. 32 V DC Direction of contact SR 4
1
0V Direction of contact SR 3
2
3
s1 3
Potentiometer
4
direction 3-4
5
Proportional s2
4
8
valve-solenoid 6
Creepspeed direction 1-2
7
7
s3
6
Direction of contact SR 2
8
5
Direction of contact SR 1
9 10 11 12 X1
s4
4
3 2
Dead man's contact or Potentiometer
short-circuit-connection direction SR 1-2
2
1
X2 1
ES / 43-11
2 Proportional valves-solenoid
9 10 11 12 13 14
Supply voltage 10 .. 32 V DC
1
0V
2
3
s1
4
Proportional
valve-solenoid
5
s2
8
6
Direction of contact SR 2
8
Direction of contact SR 1
9 10 11 12 X1
2
3
1
X2 1
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
141
Mini-Joystick
V21
The V21 is a Mini-Joystick commonly used in electro-hydraulic applications. The V21 is especi-
ally suitable for installation in our ball grips. Long life and high reliability is ensured by the latest
contactless hall-technology.
Technical data
Example
V21 P -1 -E1032 -X
Basic unit
Gate
P Cross gate
PX Special gate
Knob
Standard
1 KBAD 980
2 KBAD 1658
3 KBAD 1690
Interface
Voltage output
2 axis 2
Characteristic:
Dual 2
SPI-Interface on request
Special model
Technical details may vary based on configuration or application! Technical data subject to change without notice!
142
Mini-Joystick
V21
1 / 147
Cover plate
36
34
34
max.3
20
13
12
max.5
max.5
31
31
Hole pattern Hole pattern Hole pattern
,5
25 ±0,1
25 ±0,1
5 26 ,5
26, 24
2,
2,
7
7
Version
with actuator KBAD 1690
25° 25°
V2023/1 01.01.2023
Hole pattern
Technical details may vary based on configuration or application! Technical data subject to change without notice!
A
143
7,5
Technical data
Example
S9 - E10311 -X
Basic unit
S9 Mini-Joystick
Interface
Special model
Technical details may vary based on configuration or application! Technical data subject to change without notice!
144
Mini-Joystick
S9
1/223
25° 25° 13
Rocker
19,5
max. 4
31
Cover plate
12
32 23,5
Hole pattern
(installed from the top)
1
R1
+0,1
,5
17,9
2
+0,1
20,6
Rocker
max. 4
15
Cover plate
31
16,2
Hole pattern
(installed from below)
3
1
+0,1
chamfering
19,2
Ø5,8 x 90° ,5
R3
2
+0,1
20,2
27,2 ±0,1
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
145
Fingertip Joystick
S15
The S15 is a Fingertip Joystick designed for electro-hydraulic applications. A long service life
and high reliability is achieved by the latest contactless hall-technology. With the different actu-
ator colours the appearance can be individually designed.
Technical data
Example
S15 -2 -1 -1 -E1031 -X
Basic unit
S15 Fingertip Joystick
Actuator
1 Actuator form A
2 Actuator form B
3 Actuator form C
Actuator colour
1 Black
2 Grey*
3 Blue*
4 Red*
5 Yellow*
6 Orange*
7 Green*
*Not possible with actuator form B and C!
Mechanical function
1 T-0-T
2 R-0-R*
3 T-0-R*
4 R-0-T*
5 R-R*
6 R-R-0-R-R*
7 R-T-0-T-R*
8 T-0-T-R*
9 R-T-0-T*
*Not possible with actuator form B and C!
Interface
0,5...2,5...4,5 V redundant by Ub= 5 V 1 axis E103 1
0,5...2,5...4,5 V redundant + direction signal at Ub= 5 V 1 axis E104 1
Characteristic inverse dual 1
Characteristic dual 2
SPI - Interface on request
Special model
X Special / customer specified
Technical details may vary based on configuration or application! Technical data subject to change without notice!
146
Fingertip Joystick
S15
24
20° 20°
37,1
Cover plate
max. 4
13,1
18
Hole pattern
10 ±0,1 ( installed from the top )
4,2
S15 fingertip with actuator edition B
38
+0,1
30 ±0,1
24,7
24
+0,1
20° 18,2
20°
Cover plate
25,2
max. 4
13,1
18
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
147
Minilever
S17
The S17 is a Fingertip Joystick designed for electro-hydraulic applications. A long service life
and high reliability is achieved by the latest contactless hall-technology.
Technical data
Example
S17 -1 -1 -1 -E1031 -X
Basic unit
S17 Minilever
Actuator
1 Actuator form A
Actuator colour
1 Black
Mechanical function
1 T-0-T
Mechanical function
Characteristic dual 2
Special model
Technical details may vary based on configuration or application! Technical data subject to change without notice!
148
Minilever
S17
S17 Minilever
25° 26,2
2 5°
65,4
Cover plate
max. 4
7
30 30
46
2 5° 25°
Hole pattern
37 ±0,1
20,8
0,5 3 ,5
R7
20 ±0,1
66,9
18
7
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
149
Hall-Cross Switch
HK1
The Hall-Cross Switch HK1 is a contactless Mini-Joystick designed for electro-hydraulic applica-
tions. Different actuators are available. Optionally a version with Push button is possible.
Technical data
Example
HK1 -D -1 -1 -0 -E1031 -X
Basic unit
Additional function
D Push button
Knob
Knob colour
White transparent*
1
(printing on the reserve side possible, this makes the imprint abrasion resistant!)
2 White*
3 Yellow*
4 Green*
5 Blue*
6 Black*
7 Red*
8 Orange*
Technical details may vary based on configuration or application! Technical data subject to change without notice!
150
Hall-Cross Switch
HK1
HK1 -D -1 -1 -0 -E1031 -X
Interface
Digital output
1 axis E004 1
2 axis 2
Voltage output
0,5...2,5...4,5 V redundant at Ub = 5 V
1 axis E103 1
2 axis 2
Characteristics:
Dual 2
Special model
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
151
Hall-Cross Switch
HK1
18
Lifting 1mm
12° 12°
Variant with
press function
12,1
11,1
1,8
Cover plate
17,8
9,9
15,9
17,7
17,7
M16x1 Installation with
mounting nut
12
Installation with
retaining ring 19,9 Hole pattern
45
1,7
°
,5
22
O-ring
16,1
SW 20
Retaining ring
8
Edition: Edition: Edition: Edition:
Actuator KBAD 1931 Actuator KBAD 2025 Actuator KBAD 2028 Actuator KBAD 2029
12,6
12,5
12,3
11,1
Technical details may vary based on configuration or application! Technical data subject to change without notice!
152
Thumbwheel
S12
The Thumbwheel S12 is designed for electro-hydraulic applications. Long life and high reliability
is ensured by the latest contactless hall-technology. By the combination of different actuators,
lighting options and colours you can customise the appearance.
Technical data
Example
S12 -A -2 -1 -1 -E1031 -X
Basic unit
S12 Thumbwheel
Mounting frame
Illumination
1 Unlighted
Actuator colour
S12 S12B S12C
1 Black √ √ √
2 Grey √
3 Blue √
4 Red √ √
5 Yellow √
6 Orange √
7 Green √
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
153
Thumbwheel
S12
S12 -A -2 -1 -1 -E1031 -X
Mechanical function
1 T-0-T
2 R-0-R*1
3 T-0-R*1
4 R-0-T*1
5 R-R*1
6 R-R-0-R-R*
Interface
Special model
Technical details may vary based on configuration or application! Technical data subject to change without notice!
154
Thumbwheel
S12
15
SR1
SR2
±30°
14,5
27,5
7,7
1,5
19,6 15,4
29
7
2,
SR1
9,9
19
SR2
13
1,5
14,5
2
20
Version B Version C
with actuator KBAD 1731 with actuator KBAD 1858
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
155
Thumbwheel
S16
The Thumbwheel S16 is designed for electro-hydraulic applications. The S16 can be optimally
used with the scroll and push function as a selection device for displays.
Technical data
Example
S16 -D -2 -2 -E10311 -X
Basic unit
S16 Thumbwheel
Additional function
D Push function
Mounting direction
1 Vertical
2 Horizontal
Actuator colour
1 Black
2 Grey
Interface
Special model
Technical details may vary based on configuration or application! Technical data subject to change without notice!
156
Thumbwheel
S16
R9
,5
9,5
SR2
SR1 SR2
2
18,2
SR1
1 23 19
,5
R1
10,8
25,8
19
19,8
24,2
6
2, 18,9
23
2
2, 10
R9
,5
9,5
SR2
SR1 SR2
2
18,2
SR1
1 23 19
19,8
R1
(
2,
2)
10,8
16
19
10
6
2,
18,9
29
29
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
157
Hall-Push Button
HD
The Hall-Push Button impressed by its durability and versatility. It is available in five basic versi-
ons. By combining different lighting options, colours and symbols, it is possible to customize.
Technical data
Example
HD1 -2 -1 -1 -1 -E0111 -X
Basic unit
HD5 Hall-Push Button digital, flat mounting without bellow, actuator convex
Illumination
1 Unlighted
Actuator colour
1 Transparent
2 Black*
3 White*
4 Yellow*
5 Green*
6 Blue*
7 Red*
8 Orange*
9 Grey*
Technical details may vary based on configuration or application! Technical data subject to change without notice!
158
Hall-Push Button
HD
HD1 -2 -1 -1 -1 -E0111 -X
0 Without icon coloured cap insert (only for HD4 and HD5)
1 White transparent* (Print on back side possible, thereby the print is resistant to abrasion!)
2 White*
3 Yellow*
4 Green*
5 Blue*
6 Black*
7 Red*
8 Orange*
9 Grey*
1 Without
S.... Symbol according to ISO 7000 (example: S0244 - acoustic signal, horn / ISO 7000 symbol 0244)
X Custom-made
Interface
Special model
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
159
Hall-Push Button
HD
1/
17,7
16,2 16,2
9,6
9,7
8,9
14,2
13,4
14,2
max. 5
M12x1 M12x1
M12x1
Symbol plate
Hole pattern
HD1, HD2, HD4
12,50
Edition: Edition:
HD3 HD5
5,10
4,4
17 17
18,7
18,7
M12x1
M12x1
Hole pattern
HD3, HD5
15,50
Technical details may vary based on configuration or application! Technical data subject to change without notice!
160
Palm Grip
B36
The Palm Grip B36 has different equipment options for many requirements. It is compatible
with our Multi-Axis Controller or mounted on hydraulic drives. The Palm Grip has a highly flexi-
ble single wire (0,1 mm², 450 mm long). The mounting piece for the drive rod can be supplied
with a tapped hole 12 mm (standard) or 10 mm.
Technical data
Example
B36 -2D W K SE S12 H13 -X
Basic unit
Rocker switch momentary (T) or maintained (R), colours: red, black, yellow, blue, white
W
Mechanical functions: T-0-T, 0-T, R-0-T, R-0-R, 0-R, R-R
(Consistent with V85 / VV85 with interface E1xx to E7xx, E907 and V25/V27 with interfaces E3xx + E4xx + E6xx + E7xx
+ E907)
V Vibration
Special model
Technical details may vary based on configuration or application! Technical data subject to change without notice!
161
Palm Grip
B36
B36R
Hall push button installed Pos. 1-5
Hall push button installed Pos. 7-8 Hall push button Hall push button
installed Pos. 5 installed Pos. 5-6
43
1 2
3 4
5 5
7
115 6
8
58
B36L
Hall push button installed Pos. 1+2, 9+10
Rocker S12 installed Pos. 3-4 Rocker S12 Rocker S12
installed Pos. 6 installed Pos. 5+6
1 2
10
Technical details may vary based on configuration or application! Technical data subject to change without notice!
162
Palm Grip
B35
The Palm Grip B35 has different equipment options for many requirements. It is compatible
with our Multi-Axis Controller or mounted on hydraulic drives. The Palm Grip has a highly flexi-
ble single wire (0,1 mm², 450 mm long). The mounting piece for the drive rod can be supplied
with a tapped hole 12 mm (standard) or 10 mm.
Technical data
Example
B35 -2D W K SE S12 H13 -X
Basic unit
Rocker switch momentary (T) or maintained (R), colours: red, black, yellow, blue, white
W
Mechanical functions: T-0-T, 0-T, R-0-T, R-0-R, 0-R, R-R
K Lever switch
(Consistent with V85 / VV85 with interface E1xx to E7xx, E907 and V25/V27 with interfaces E3xx + E4xx +E6xx + E7xx
+ E907)
V Vibration
Special model
Technical details may vary based on configuration or application! Technical data subject to change without notice!
163
Palm Grip
B35
B35R
Hall push button installed Pos. 1 - 4
Hall push button installed Pos. 7 - 8 Hall push button
installed Pos. 5 - 6
50
1 2
3 4
7 5
6
8
135
Twist grip PA13,H13
Direction 13-14
Actaution by rotation
max. ± 25°
75 80
B35L
Hall push button installed Pos. 1 - 4 Hall push button installed Pos. 11 - 12 Hall push button installed Pos. 11 - 12
Hall push button installed Pos. 9 - 10 Rocker S12 installed Pos. 6 Rocker S12 can be installed on the side
12 11 12 11
9
10
Technical details may vary based on configuration or application! Technical data subject to change without notice!
164
Palm Grip
B34
The Palm Grip B34 has different equipment options for many requirements. It is compatible
with our Multi-Axis Controller or mounted on hydraulic drives. The Palm Grip has a highly flexi-
ble single wire (0,1 mm², 450 mm long). The mounting piece for the drive rod can be supplied
with a tapped hole 12 mm (standard) or 10 mm.
Technische Daten
Example
B34L -2D W S12 -X
Basic unit
Rocker switch momentary (T) or maintained (R), colours: red, black, yellow, blue, white
W
Mechanical functions: T-0-T, 0-T, R-0-T, R-0-R, 0-R, R-R
K Lever switch
(Consistent with V85 / VV85 with interface E1xx to E7xx, E907 and V25/V27 with interfaces E3xx + E4xx +E6xx
+ E7xx + E907)
Special model
Technical details may vary based on configuration or application! Technical data subject to change without notice!
165
Palm Grip
B34
1/
B34
53
44,5
30
106
12
40 26
45
Edition:
Edition:
Push button installed Pos. 1-3
Push button installed Pos. 1-3,4,5
Rocker switch installed Pos. 4-5
Lever switch installed Pos. 6
Lever switch installed Pos. 6
Position rocker switch or push button left hand ()
1
2 3
4 (4)
4
6 6
5 (5) 5
Technical details may vary based on configuration or application! Technical data subject to change without notice!
166
Palm Grip
B33
The Palm Grip B33 has different equipment options for many requirements. It is compatible
with our Multi-Axis Controller or mounted on hydraulic drives. The Palm Grip has a highly flexi-
ble single wire (0,1 mm², 450 mm long). The mounting piece for the drive rod can be supplied
with a tapped hole 12 mm (standard) or 10 mm.
Technical data
Example
B33L -2D S12 -X
Basic unit
Special model
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
167
Palm Grip
B33
1
B33
Edition:
Push button installed Pos. 1,2,3
38 34
3
37,5
41
Edition:
Rocker switch installed Pos. 1+2
1
72,5
23
8,10
Technical details may vary based on configuration or application! Technical data subject to change without notice!
168
Palm Grip
B32
The Palm Grip B32 has different equipment options for many requirements. It is compatible
with our Multi-Axis Controller or mounted on hydraulic drives. The Palm Grip has a highly flexi-
ble single wire (0,1 mm², 450 mm long). The mounting piece for the drive rod can be supplied
with a tapped hole 12 mm (standard) or 10 mm.
Technical data
Example
B32L -2D W SE S12 -X
Basic unit
Rocker switch momentary (T) or maintained (R), colours: red, black, yellow, blue, white
W
Mechanical functions: T-0-T, 0-T, R-0-T, R-0-R, 0-R, R-R
(Consistent with V85 / VV85 with interface E1xx to E7xx, E907 and V25/V27 with interfaces E3xx + E4xx + E6xx )
+ E7xx + E907)
Special model
Technical details may vary based on configuration or application! Technical data subject to change without notice!
169
Palm Grip
B32
1/
B32
Push button
installed Pos. 1 - 8, 11 - 13 ca 41
Rocker switch
installed Pos.9
24
64
9 11
1 2
8 12
3 4
76
7 13
5 6
14
26
Push button
installed Pos. 1 - 8, 12 + 13 Rocker switch crosswise
Rocker switch lengthwise installed Pos. 10
installed Pos. 10
10
Edition: Edition:
Multi-axis controller V21 Edition: Rocker switch
installed Pos. 1/3 Rocker switch installed Pos.1/3 + 2/4
(Pos. 9 - 11 not available) installed Pos. 5/6 (Pos. 9 - 11 not available)
Technical details may vary based on configuration or application! Technical data subject to change without notice!
170
Palm Grip
B31
The Palm Grip B31 has different equipment options for many requirements. It is compatible
with our Multi-Axis Controller or mounted on hydraulic drives. The Palm Grip has a highly flexib-
le single wire (0,1 mm², 450 mm long).
Technical data
Example
B31R -2D W HK S12 V21 -X
Basic unit
CAN
Supply voltage 9-32 V DC
Current carrying capacity External digital output for LEDs 5 mA - 30 mA (dependent on the number of LED`s)
Protocol CANopen CiA DS 301, SAE J1939 (based on) or CANopen Safety EN50325-5
CAN E313 1
Special model
Technical details may vary based on configuration or application! Technical data subject to change without notice!
171
Palm Grip
B31
1/
B31R
Edition:
Push button installed Pos. 1-14
10
9
13
8 5
7 4
2
6 3 1 14
159
12 11
34
114 60 78
Edition: Edition:
Rocker switch Rocker switch
Installed Pos. 15, 16 horizontal Installed Pos.11+12, 15, 16 vertical
() = Installation left () = Installation left
15 (16) 15 (16)
16 16
(1 (1
5) 5)
11+12
B31L
Edition: Edition: Edition:
Push button installed Pos. 1-14 Multi-axis controller V21 Multi-axis controller V21
Installed Pos. 6+7, Pos.8, Pos. 9+10 Installed Pos. 6+7, Pos.8, Pos. 9+10
Rocker switch installed Pos. 1+2 Push button installed Pos. 1-5
10
13 9
5 8
4 7
2
1 3 6
11 12
Technical details may vary based on configuration or application! Technical data subject to change without notice!
172
Palm Grip
B30
The Palm Grip B30 has different equipment options for many requirements. It is compatible
with our Multi-Axis Controller or mounted on hydraulic drives. The Palm Grip has a highly flexi-
ble single wire (0,1 mm², 450 mm long). The mounting piece for the drive rod can be supplied
with a tapped hole 12 mm (standard) or 10 mm.
Technical data
Example
B30 -2D W SR SE S12 H13 -X
Basic unit
Rocker switch momentary (T) or maintained (R), colours: red, black, yellow, blue,
W white
Mechanical functions: T-0-T, 0-T, R-0-T, R-0-R, 0-R, R-R
(Consistent with V85 / VV85 with interface E1xx to E7xx, E907 and V25/V27 with interfaces E3xx + E4xx + E6xx )
+ E7xx + E907)
Special model
Technical details may vary based on configuration or application! Technical data subject to change without notice!
173
Palm Grip
B30
1/
B30
Push button
installed Pos. 1 - 8 +11
Rocker switch
installed Pos. 9+10
1 2
3 4
7
5 6 8
137
rotation ±25°
56 20
ca. 41
10
9
11 11
Technical details may vary based on configuration or application! Technical data subject to change without notice!
174
Palm Grip
B29
The Palm Grip B29 has different equipment options for many requirements. It is compatible
with our Multi-Axis Controller or mounted on hydraulic drives. The Palm Grip has a highly flexi-
ble single wire (0,1 mm², 450 mm long). The mounting piece for the drive rod can be supplied
with a tapped hole 12 mm (standard) or 10 mm.
Technical data
Example
B29 -2D -X
Basic unit
(Consistent with V85 / VV85 with interface E1xx to E7xx, E907 and V25/V27 with interfaces E3xx + E4xx + E6xx + E7xx
+ E907)
Special model
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
175
Palm Grip
B29
1/
B29
95 43
82
25°
27,1
Edition:
Push button installed Pos. 1-6
100,5
6 5
1 2 3 4
Edition: Edition:
Sensor installed Pos. 6, Sensor installed Pos. 5,
Push button installed Pos. 3,4 Push button installed Pos. 1,2
104,5
104,5
5
6
3 4 1 2
Technical details may vary based on configuration or application! Technical data subject to change without notice!
176
Palm Grip
B28
The Palm Grip B28 has different equipment options for many requirements. It is compatible
with our Multi-Axis Controller or mounted on hydraulic drives. The Palm Grip has a highly flexi-
ble single wire (0,1 mm², 450 mm long). The mounting piece for the drive rod can be supplied
with a tapped hole 10 mm (standard).
Technical data
Example
B28 -2D SE -X
Basic unit
(Consistent with V85 / VV85 with interface E1xx to E7xx, E907 and V25/V27 with interfaces E3xx + E4xx + E6xx + E7xx + E907)
Special model
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
177
Palm Grip
B28
1/
Edition:
Push button installed
Pos. 1,3,4,6,7,8
Sensor button function on left or right available
43,6
102
8
18
70
3
6
4
1
Edition: Edition:
Push button installed Push button installed
Pos. 2,5,7,8 Pos. 7,8,9,10
Sensor button function on left or right available Sensor button function on left or right available
9
2
10
Technical details may vary based on configuration or application! Technical data subject to change without notice!
178
Palm Grip
B26
The Palm Grip B26 has different equipment options for many requirements. It is compatible
with our Multi-Axis Controller or mounted on hydraulic drives. The Palm Grip has a highly flexi-
ble single wire (0,1 mm², 450 mm long). The mounting piece for the drive rod can be supplied
with a tapped hole 12 mm (standard) or 10 mm.
Technical data
Example
B26L -2D HD W S12 V21 H13 -X
Basic unit
Rocker switch momentary (T) or maintained (R), colours: red, black, yellow, blue, white
W
Mechanical functions: T-0-T, 0-T, R-0-T, R-0-R, 0-R, R-R
(Consistent with V85 / VV85 with interface E1xx to E7xx, E907 and V25/V27 with interfaces E3xx + E4xx + E6xx
+ E7xx + E907)
V Vibration
Special model
Technical details may vary based on configuration or application! Technical data subject to change without notice!
179
Palm Grip
B26
1/
B26R
Edition:
Push button installed Pos. 1-12
Rocker switch installed Pos. 13
11
10
9
8
7
6
5 4
13
3 2
1
173
12
93 38 74,5 38
B26L
Edition: Edition:
Push button installed Pos. 1-12 Push button installed Pos. 1+2, 8-12
Rocker switch installed Pos. 13 Rocker switch installed Pos. 3+5, 4+7
11 11
10 10
9 9
8 8
7
6
4
5
2 3 2
1 1
12 13 12
Technical details may vary based on configuration or application! Technical data subject to change without notice!
180
Palm Grip
B25
The Palm Grip B25 has different equipment options for many requirements. It is compatible
with our Multi-Axis Controller or mounted on hydraulic drives. The Palm Grip has a highly flexi-
ble single wire (0,1 mm², 450 mm long). The mounting piece for the drive rod can be supplied
with a tapped hole 12 mm (standard) or 10 mm.
Technical data
Example
B25L -2D W K SE V21 H13 -X
Basic unit
Rocker switch momentary (T) or maintained (R), colours: red, black, yellow, blue, white
W
Mechanical functions: T-0-T, 0-T, R-0-T, R-0-R, 0-R, R-R
K Lever switch
(Consistent with V85 / VV85 with interface E1xx to E7xx, E907 and V25/V27 with interfaces E3xx + E4xx + E6xx + E7xx
+ E907)
V Vibration
Technical details may vary based on configuration or application! Technical data subject to change without notice!
181
Palm Grip
B25
CAN
Supply voltage 9-32 V DC
Current carrying capacity External digital output for LEDs 5 mA - 30 mA (dependent on the number of LEDs)
Protocol CANopen CiA DS 301, SAE J1939 (based on) or CANopen Safety EN50325-5
Special model
X Special / customer specified
182
Palm Grip
B25
1/
B25R
Push button installed Pos. 1 - 11 Thumbwheel S12
Lever switch installed Pos. 12 installed Pos. 9+10 possible
2
1
4
3 8
6 7
5
9
10
146
11
12
29 Lever switch
51 49 72 37
B25L
Push button installed Pos. 1 - 11
Lever switch installed Pos. 12
2
1
4
3 8
6 7
5
9
10
11
12
Technical details may vary based on configuration or application! Technical data subject to change without notice!
183
Palm Grip
B24
The Palm Grip B24 has different equipment options for many requirements. It is compatible
with our Multi-Axis Controller or mounted on hydraulic drives. The superior grip surface is fra-
med by an illuminated coloured ring element. The Palm Grip has a highly flexible single wire (0,1
mm², 450 mm long). The mounting piece for the drive rod can be supplied with a tapped hole 12
mm (standard) or 10 mm.
Technical data
Example
B24 -D 2W V21 -IWH -X
Basic unit
(Consistent with V85 / VV85 with interface E1xx to E7xx, E907 and V25/V27 with interfaces E3xx + E4xx + E6xx
+ E7xx + E907)
Additional option
Special model
Technical details may vary based on configuration or application! Technical data subject to change without notice!
184
Palm Grip
B24
1/
Edition :
Push button installed Pos. 1 - 6, 10
Rocker switch / taste installed Pos. 7,(8), 9
() left
39 25
43
1 2
3 4
9 6 5
7 (8)
141
10
ca. 41
Edition :
Push button installed Pos. 5,6,10
Rocker switch / taste Pos. 7,(8), 9
multi-axis controller V21 Pos. 11
() left
11
9
7 (8)
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
185
Palm Grip
B23
The Palm Grip B23 has different equipment options for many requirements. It is compatible
with our Multi-Axis Controller or mounted on hydraulic drives. The Palm Grip has a highly flexi-
ble single wire (0,1 mm², 450 mm long). The mounting piece for the drive rod can be supplied
with a tapped hole 12 mm (standard) or 10 mm.
Technical data
Example
B23R -2D W V21 -X
Basic unit
Rocker switch momentary (T) or maintained (R), colours: red, black, yellow, blue, white
W
Mechanical functions: T-0-T, 0-T, R-0-T, R-0-R, 0-R, R-R
Special model
Technical details may vary based on configuration or application! Technical data subject to change without notice!
186
Palm Grip
B23
1/
B23R
Push button installed Pos. 1 - 8
98 47
59 35
4
115
5
6
7
8
36
25
32
B23L
Push button installed Pos. 1 - 8 Edition :
Multi-axis controller V21
Push button installed Pos. 5,6,7,8
1
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
187
Palm Grip
B22
The Palm Grip B22 has different equipment options for many requirements. It is compatible
with our Multi-Axis Controller or mounted on hydraulic drives. The Palm Grip has a highly flexi-
ble single wire (0,1 mm², 450 mm long). The mounting piece for the drive rod can be supplied
with a tapped hole 7 mm.
Technical data
Example
B22AL -4D W -X
Basic unit
(Consistent with V85 / VV85 with interface E1xx to E7xx, E907 and V25/V27 with interfaces E3xx + E4xx + E6xx + E7xx
+ E907)
Special model
Technical details may vary based on configuration or application! Technical data subject to change without notice!
188
Palm Grip
B22
1 / 315
B22
Edition: Edition:
Push button installed Pos. 1,2,3,4 Push button installed Pos. 3,4,10
Position push button left hand () Position push button left hand ()
44
39
1 2 10
3 (3) 3 3 3
(3)
82
4 (4) 4 4 4
(4)
8
B22A
Editon: Edition:
Push button installed Pos. 3,4,5,6,7,8 Push button installed Pos. 3,4,5,6,9
Position push button left hand () Rocker switch installed Pos. 7-8
Position push button left hand ()
40 54
5 6 5 6
7 8 7 8
9
120
3 (3) 3 3
3 (3)
4 (4) 4 4
4 (4) V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
189
Palm Grip
B20
The Palm Grip B20 has different equipment options for many requirements. It is compatible
with our Multi-Axis Controller or mounted on hydraulic drives. The Palm Grip has a highly flexi-
ble single wire (0,1 mm², 450 mm long). The mounting piece for the drive rod can be supplied
with a tapped hole 12 mm.
Technical data
Example
B20L -2D W K V21 H13 -X
Basic unit
Rocker switch momentary (T) or maintained (R), colours: red, black, yellow, blue, white
W
Mechanical functions: T-0-T, 0-T, R-0-T, R-0-R, 0-R, R-R
K Lever switch
(Consistent with V85 / VV85 with interface E1xx to E7xx, E907 and V25/V27 with interfaces E3xx + E4xx + E6xx
+ E7xx + E907)
Special model
Attachments
Technical details may vary based on configuration or application! Technical data subject to change without notice!
190
Palm Grip
B20
1 / 311
Edition:
Push button installed 84
Cross switch installed
98 58
169
Lever switch
37
42
Twist grip H13
101 70
Edition: Edition:
Hall rocker switch Multi-axis controller V21
Push button Potentiometer drive PA9
Push button
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
191
Palm Grip
B14 / B15
The Palm Grip B14/B15 has different equipment options for many requirements. It is compatib-
le with our Multi-axis and Single-axis controller or mounted on hydraulic drives. The Palm Grip
has a highly flexible single wire (0,1 mm², 450 mm long). The mounting piece for the drive rod
can be supplied with a tapped hole 12 mm (standard) or 10 mm.
Technical data
Example
B14 -2D -X
Basic unit
Special model
Technical details may vary based on configuration or application! Technical data subject to change without notice!
192
Palm Grip
B14 / B15
1 / 301
B14
Push button installed Pos. 1,2 78 31
1
2
144
24
B15 24
Push button installed Pos. 1,2
1
2
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
193
Palm Grip
B10
The Palm Grip B10 has different equipment options for many requirements. It is compatible
with our Double-handle controller or mounted on hydraulic drives. The Palm Grip has a highly
flexible single wire (0,1 mm², 450 mm long). The mounting piece for the drive rod can be sup-
plied with a tapped hole 10 mm.
Technical data
Example
B10AL -3D W V -X
Basic unit
Special model
Technical details may vary based on configuration or application! Technical data subject to change without notice!
194
Palm Grip
B10
1 / 297
B10
Vibrator button
65 37
79,5
10
B10A
Edition installed left: Edition installed right:
Push button installed Pos. 1,2,3 Push button installed Pos. 4,5,6
Rocker switch Rocker switch
100
1 4
2 5
3 6
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
195
Palm Grip
B9
The Palm Grip B9 has different equipment options for many requirements. It is compatible with
our Multi-Axis Controller or mounted on hydraulic drives. The Palm Grip has a highly flexible
single wire (0,1 mm², 450 mm long). The mounting piece for the drive rod can be supplied with a
tapped hole 12 mm (standard) or 10 mm.
Technical data
Example
B9 -2D KT A13 PA11 PA13 -X
Basic unit
B9 Palm Grip
D Push Button
Hall-Potentiometer
Special model
Attachments
Z03 Rosette KBF 905 with 4 screws M5x15 necessary for bellow KMD 190 5209900404
Technical details may vary based on configuration or application! Technical data subject to change without notice!
196
Palm Grip
B9
1 / 295
B9
Edition :
Push button installed Pos. 1 - 8
Cross switch tast 81
3 4
2 5
1 6
8 7
85
80
Edition :
Push button installed Pos. 1 - 8
Multi-axis controller V21
3 4
2 5
1 6
8 7
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
197
Palm Grip
B7 / B8
The Palm Grip B7 / B8 has different equipment options for many requirements. It is compatible
with our Multi-Axis Controller or mounted on hydraulic drives. The Palm Grip has a highly flexi-
ble single wire (0,1 mm², 450 mm long). The mounting piece for the drive rod can be supplied
with a tapped hole 12 mm (standard) or 10 mm.
Technical data
Example
B7 -2D W K SE S9 PA13 -X
Basic unit
Rocker switch momentary (T) or maintained (R), colours: red, black, yellow, blue,
W white
Mechanical functions: T-0-T, 0-T, R-0-T, R-0-R, 0-R, R-R
K Lever switch
A13 Rotary Grip T-0-T
SE Sensor Button capacitive with external control electronics
S Sensor Button capacitive without external control electronics
(Consistent with V85 / VV85 with interface E1xx to E7xx, E907 and V25/V27 with interfaces E3xx + E4xx + E6xx
+ E7xx + E907)
V Vibrator
Impulse 24 V DC ED 100%
Special model
Attachments
Z03 Rosette KBF 905 with 4 screws M5x15 necessary for bellow KMD 190 5209900404
Technical details may vary based on configuration or application! Technical data subject to change without notice!
198
Palm Grip
B7 / B8
1 / 293
B7 63
Edition:
Push button installed Pos. 1 - 8
2 3
1
4
6 5
7
8
Vibrator
button
142
Lever switch
Sensor button
80
B8 Edition:
Editon: Edition :
Push button installed Pos. 1 - 8 Multi-axis controller V21
Push button installed Pos. 5,6,7,8 Hall Rocker switch
Push button installed Pos. 1,5,6,8
3 2
1 1
4
5 6 5 6 5 6
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
199
Palm Grip
B6
The Palm Grip B6 has different equipment options for many requirements. It is compatible with
our Multi-Axis Controller or mounted on hydraulic drives. The Palm Grip has a highly flexible
cable (4 respectively 8 x 0,25 mm², 450 mm long). The mounting piece can be supplied with a
tapped hole M10 (standard) or M8.
Technical data
Example
B6 -D K -X
Basic unit
B6 Palm Grip
K* Lever switch
Special model
Technical details may vary based on configuration or application! Technical data subject to change without notice!
200
Palm Grip
B6
1 / 291
B6
Edition: Edition:
Lever switch side Lever switch side
Rocker switch installed top Push button top
39
104
65
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
201
Palm Grip
B5
The Palm Grip B5 has different equipment options for many requirements. It is compatible with
our Multi-Axis Controller or mounted on hydraulic drives. The Palm Grip has a highly flexible
single wire (4 respectively 8 x 0,25 mm², 450 mm long). The mounting piece can be supplied
with a tapped hole M10 (standard) or M8.
Technical data
Example
B5 -D W -X
Basic unit
B5 Palm Grip
Special model
Technical details may vary based on configuration or application! Technical data subject to change without notice!
202
Palm Grip
B5
1 / 290
Edition: Edition:
Push button installed Pos. 1,2 Rocker switch installed Pos. 3
Push button installed Pos. 2
35
3
1
91
2
2
Edition:
Push button installed Pos. 2,3
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
203
Palm Grip
B3
The Palm Grip B3 has different equipment options for many requirements. It is compatible with
our Multi-Axis Controller or mounted on hydraulic drives. The Palm Grip has a highly flexible
single wire (0,1 mm², 450 mm long). The mounting piece can be supplied with a tapped hole 12
mm (standard) or 10 mm.
Technical data
Example
B3 -2D W K SE PA11 PA13 -X
Basic unit
B3 Palm Grip
D Push Button
K Lever switch
SR Sliding switch
ST Sliding switch
L left, R right
(Consistent with V85 / VV85 with interface E1xx to E7xx, E907 and V25/V27 with interfaces E3xx + E4xx + E6xx
+ E7xx + E907)
V Vibration
Technical details may vary based on configuration or application! Technical data subject to change without notice!
204
Palm Grip
B3
PA11 Thumbwheel
H11 Thumbwheel
Hall-Potentiometer
L left, R right
Hall-Potentiometer
Special model
Attachments
Z03 Rosette KBF 905 with 4 screws M5 x 15 necessary for bellow KMD 190 520990004
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
205
Palm Grip
B3
1 / 287
Edition:
Push button standard
installed Pos. 1,2
B3
2
76 Thumbwheel PA11, A11, H11 45
left or right available ±25°
1
Sensor button function Edition:
on each or both sides 3 4 Rocker switch
installed Pos. 7+8
5 6
Vibrator button
152
Lever switch
32
Edition:
Twist grip PA13, A13, H13 Sliding switch
Direction 13-14 installed Pos. 13 + 14
Actuating by rotation ±25° Drive with potentiometer PA12 bzw.
Push button with 2 steps ZD
installed Pos. 11,12
12
13
14
70
11
() = Installation right Edition:
Push button KDA 21
installed Pos. 1,2,7,8
15 (16)
8
3 4
9
1
7
(10) 5 6
Edition:
Rocker switch
installed Pos. 7 + 8
Push button
installed Pos. 1,2
2
1
Technical details may vary based on configuration or application! Technical data subject to change without notice!
206
Palm Grip
B2
The Palm Grip B2 has different equipment options for many requirements. It is compatible with
our Multi-Axis Controller or mounted on hydraulic drives. The Palm Grip has a highly flexible
cable (8 x 0,25 mm², 450 mm long). He can be tilted in any direction by 20 degrees and can lock
in this position. The mounting piece can be supplied with a tapped hole M10 (standard) or M8.
Technical data
Example
B2 -2D PA15 -X
Basic unit
B2 Palm Grip
Special model
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
207
Palm Grip
B2
1 / 285
B2
Edition:
Pusher installed Pos. 1,2
30°
30°
68
2 1
13
65 36
Direction of view
70
Edition: Edition:
Push button KDA / 70 Push button KDA 21
installed Pos. 1,2,3,4 installed 1,2,3,4
3 (4)
3 (4)
62
Technical details may vary based on configuration or application! Technical data subject to change without notice!
208
Palm Grip
B1
The Palm Grip B1 has different equipment options for many requirements. It is compatible with
our Multi-Axis Controller or mounted on hydraulic drives. The Palm Grip has a highly flexible
cable (4 respectively 8 x 0,25 mm², 450 mm long). The mounting piece can be supplied with a
tapped hole M10 (standard) or M8.
Technical data
Example
B1 -2D W -X
Basic unit
B1 Palm Grip
K Lever switch
Special model
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
209
Palm Grip
B1
1 / 284
Edition: Edition:
Push button installed Pos. 1,2,3,4 Rocker switch installed Pos. 4
Push button installed Pos. 2,3
38
4
4
2 2
117
3 3
Edition:
Lever switch installed side
Technical details may vary based on configuration or application! Technical data subject to change without notice!
210
Control Console
C1
We designed the Control Console C1 to give our customers the maximum freedom of design and
conguration options. The design has paid attention to a compact format, which can be extended
with additional modules. The modular design allows individual assembly with joysticks, displays
and command devices. The Control Console C1 is thus able to adapt perfectly to your product
and your branding.
Standard colour:
Housing upper part: light grey RAL 7035 and anthracite RAL 7016
Housing bottom part: anthracite RAL 7016
Insert plate: anthracite RAL 7016
Technical data:
Example
C1 -1 -1 -1 -0 USB -L1 / V27 / KLS / X
Basic unit
Insert plate
0 No illumination
1 RGB-illumination left
2 RGB-illumination right
Attachements
L1 Logo left
L2 Logo right
Technical details may vary based on configuration or application! Technical data subject to change without notice!
211
Control Console
C1
Wiring
Special model
Technical details may vary based on configuration or application! Technical data subject to change without notice!
212
Control Console
C1
Thickness of
Horizontal adjustment mounting plate, screw for
provided by mounting
30 30 customer plate
(mm)
1 M5x10
1,5 M5x12
2 M5x12
42
2,5 M5x12
3 M5x12
4 M5x14
5 M5x16
123,5 6 M5x16
M5 8 M5x18
247
10 M5x20
90°
deg. hinged
USB-connection
Storage
compartment
max. 52
min. 30
Arm cushions
adjustable in 3 steps
150
100
1....10mm
mountig plate
provided by
customer
Cable outlet
215
Size optional
Positioning of devices on
customer request
Positioning of devices on
customer request
Variante 2: inlay with deepening
extension console
160
520
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
213
Touch Display
TD1
The Touch Display TD1 was developed for the rough use in working machines.
It is available in 7" and 10.1" versions. It can be easily integrated into the machine via the CAN
bus interface. Due to the wide reading angle and the strong brightness, optimal readability is
guaranteed even in difficult lighting conditions.
Example
Basic unit
TD 1-7 Touch Display 7" 1024 x 600 pixel
TD 1-10 Touch Display 10,1" 1280 x 800 pixel
Technical information
Viewing angle +/-85°
Color depth 24 bit
Contrast ratio 1000:1
Brightness type 850cd/sqm
Brightness dimmable in 16 steps
Capacitive touch panel
4-core CPU ARM A35 1.2GHz, 2GB RAM
CAN bus interface
eMMC 8GB internal
Integrated horn, external headset stereo output (for car speakers with amplifier)
USB B 2.0 Highspeed, 1500mA max. charging current
Wireless data transfer Bluetooth 4.0 or Bluethooth 5.0
Light sensor
Supply voltage 7 to 32V DC
2 digital outputs max. current 2A
5 digital inputs and ignition input
Internal real time clock
Protection class IP68
Pre-installed Linux distribution with all necessary drivers
Professional user interface can be programmed with Qt Library (LGPL)
Technical details may vary based on configuration or application! Technical data subject to change without notice!
214
Touch Display
TD1
TD1-7
90 2
192
18 42 R 75
5
127
M6 9
TD1-10
90 2
253 18 42
75
R5
177
M6 9
Technical details may vary based on configuration or application! Technical data subject to change without notice!
215
Display Controller
DC1
The Display Controller DC1 is a robust CAN bus operating unit for controlling HMI displays. The
module is designed for rough applications. Due to the individual design and illumination of the
symbols, it can be integrated into any operating concept.
Technical data
Functions
Example
DC1 -1 -S3315 -S0924 -E3151 -X
Basic unit
Illumination
0 Without symbol
1 F1
2 F2
S Symbol according to ISO 7000 (example: S0244 - acoustic signal, horn / ISO 7000 symbol 0244)
X Custom-made
0 Without symbol
1 F1
2 F2
S Symbol according to ISO 7000 (example: S0244 - acoustic signal, horn / ISO 7000 symbol 0244)
X Custom-made
CAN
CAN E3151
CANopen Safety
Special model
Technical details may vary based on configuration or application! Technical data subject to change without notice!
216
Display Controller
DC1
DC1
42
push
31
78
cover plate
1,5-4mm
42
67,5
72
clamp plate hole pattern
68
R2
incline
rotate
membrane keypad
77
(illuminated)
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
217
Steering Controller
LG2
The steering controller LG2 is developed for the rough use in working machines. A long service
life and high reliability is achieved by the latest contactless Hall technology. The CAN bus interfa-
ce makes it easy to integrate the controller into any machine. The LG 2 is available with a handle
or without a handle with a shaft outlet (12mm).
Technical data
Example
LG2 -1 -R E3161 -X
Basic unit
Grip
0 Without
1 With grip
Axis 1
E3xx CAN-interface
Special model
Technical details may vary based on configuration or application! Technical data subject to change without notice!
218
Steering Controller
LG2
CAN
Wiring CAN (IN) cable 300 mm with plug connector M12 (male)
CAN E316 1
CANopen Safety
Wiring CAN (IN) cable 300 mm with plug connector M12 (male)
Attachments
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
219
Steering Controller
LG2
64
35
cover plate
to the board )
( According
Cable outlet
64
A
65
Cover housing
73
Hole pattern
( installed from below )
56,5 ±0,2
5
25
Technical details may vary based on configuration or application! Technical data subject to change without notice!
220
Foot Pedal
P20
The Foot Pedal P20 is a rugged switching device for electro-hydraulic. A long service life and
high reliability is ensured by the latest contactless hall-technology. Due to the modular construc-
tion and the different electrical interfaces it is universally applicable..
Technical data
Example
P20 -1 -ZZ -E1041 -S... -X
Basic unit
Pedal
Spring return
Z Spring return
E 3xx CAN-interface
Plug connectors
Special model
Technical details may vary based on configuration or application! Technical data subject to change without notice!
221
Foot Pedal
P20
Digital output
Supply voltage 9-32 V DC
Current carrying capacity Direction signal 150 mA
Zero position signal 500 mA
Wiring Cable 500mm long without plug connector
Optional with plug connector (standard plug connectors see page 125) S
2 direction signals + 1 zero position signal (galvanically isolated) E001 1
Voltage output
Supply voltage 9-32 V DC (*11,5-32 V)
Current carrying capacity Direction signal 150 mA
Zero position signal 500 mA
Wiring Cable 500mm long without plug connector
Optional with plug connector (standard plug connectors see page 125) S
0,5...2,5...4,5 V redundant + 2 direction signals + 1 zero position signal (galvanically isolated) E112 1
0,5...2,5...4,5 V redundant + 1 direction signal + 1 zero position signal (galvanically isolated) E146 1
0...5...10 V redundant + 2 direction signals + 1 zero position signal (galvanically isolated), supply voltage 11,5 - 32 V DC E132 1
0...5...10 V redundant + 1 direction signal + 1 zero position signal (galvanically isolated), supply voltage 11,5 - 32 V DC E147 1
10...0...10 V + 2 direction signals + 1 zero position signal (galvanically isolated), supply voltage 11,5 - 32 V DC, E136 1
sensor redundant with error monitoring and error signal
Output options
Characteristic:
Inverse dual *¹ 1
Dual *¹ 2
Inverse dual with dead zone +/- 3° *¹ (standard) 3
Dual with dead zone +/- 3° *¹ 4
*¹ Not combinable with output E136X
Single *² 5
Single with dead zone +/- 3° *² (standard) 6
*² Not combinable with output E1121 and E1321,
E1461 und E1471
Voltage output with other value on request!
Technical details may vary based on configuration or application! Technical data subject to change without notice!
222
Foot Pedal
P20
Current output
Supply voltage 9-32 V DC
Current carrying capacity Direction signal 150 mA
Zero position signal 500 mA
Wiring Cable 500 mm long without plug connector
Optional with plug connector (standard plug connectors see page 125) S
0...10...20 mA + 2 direction signals + 1 zero position signal (galvanically isolated), sensor redundant with error monitoring E206 1
and error signal
0...20 mA + 1 direction signal + 1 zero position signal (galvanically isolated), sensor redundant with error monitoring signal E222 1
and error signal
20...0...20 mA + 2 direction signals + 1 zero position signal (galvanically isolated), sensor redundant with error monitoring E208 1
and error signal
4...12...20 mA + 2 direction signals + 1 zero position signal (galvanically isolated), sensor redundant with error monitoring E214 1
and error signal
4...20 mA + 1 direction signal + 1 zero position signal (galvanically isolated), sensor redundant with error monitoring E223 1
and error signal
20...4...20 mA + 2 direction signals + 1 zero position signal (galvanically isolated), sensor redundant with error monitoring E216 1
and error signal
Output options
Single 5
Single with dead zone +/- 3° (standard) 6
Current output with other value on request!
CAN
Supply voltage 9-36 V DC
Idle current consumption 120 mA
Current carrying capacity Direction signal 100 mA
Protocol CANopen CiA DS 301 or SAE J 1939 (based on)
Baud rate 125 kBit/s to 1 Mbit/s (standard 250 kBit/s)
Wiring CAN (IN) cable 500 mm with plug connector M12 (male)
CAN (OUT) cable 500 mm with plug connector M12 (female)
CAN P20 E307 1
With additional digital output separately wired (not via CAN)
- 1 direction signal 2
CANopen Safety
Supply voltage 9-36 V DC
Idle current consumption 120 mA
Current carrying capacity Direction signal 100 mA
Protocol CANopen Safety EN50325-5
Baud rate 125 kBit/s bis 1 MBit/s (standard 250 kBit/s)
Wiring CAN (IN) cable 500 mm with plug connector M12 (male)
CAN (OUT) cable 500 mm with plug connector M12 (female)
CANopen Safety P20 E407 1
With additional digital outputs separately wired (not via CAN)
- 1 direction signal 2
Attachments
Z01 Mating connector M12 male insert with 2 m cable 20201140
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
223
Foot Pedal
P20
3/
194
25°
126
63
60
15°
55
61,5
32,75
21
61,5
21
32,75
192,3
236,6
175 175
155
155
46
73
91
93
57
73
90
93
6,3
6,3
(4xM6)
(4xM6)
150,7 153,1
°
220 15
110
°
15
95
70
231
201,6
32,75
61,5
21
101,4
175
65
61,5
32,75
21
6,3 175
(4xM6) 6,3
(4xM6)
73
93
73
93
155
155
Technical details may vary based on configuration or application! Technical data subject to change without notice!
224
Foot Pedal
P20
D C
E
optional
optionalwith
mit gear lever
Schalthebel
44,8
44,8
28
28
723
723
552
552
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
225
Foot Pedal
P10 / P11 / P12
The Foot Pedal P10 / P11 / P12 is a rugged switching device for electro-hydraulic. The modular
design enables the switching device to be used universally. The P10/P11/P12 is resistant to oil,
maritime, climate, ozone and UV radiation.
Technical data
Example
P10 -1 Z P -A01 P224 -B -X
Basic unit
Detent
Without
R4 1-0-1
Direction 1-2
2 2 contacts z.B.
MS12 A02
MS13 A03
MS21 A05
Z Spring return
R Friction brake
Cover housing
Special model
Technical details may vary based on configuration or application! Technical data subject to change without notice!
226
Foot Pedal
P10 / P11 / P12
3 / 104
P10/P11 P12
15
170
°
0
22
30
15°
0
10
120
0
64,4
65
15°
33,5
IP 54
IP 65
(According to board)
A
Cable outlet
90
(Cover housing)
100
100
84
84
40
Hole pattern
M6
92
76,5
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
227
Foot Pedal
P8 / PP8
The Foot Pedal P8 / PP8 is a rugged switching devices for footing applications. The Foot Pedal
is resistant to oil, maritime conditions e.g. offshore /vessels, UV radiation typically from the sun.
Technical data
Example
P8 -1 Z P -A01 P124 -X
Basic unit
P8 Foot Pedal
Reinforced version
Detent
without
R2 0-2
R3 0-3
R4 0-4
Direction 1-2
2 2 contacts z.B.
*Only possible without potentiometer! A99 contact - arrangement according customer request
Z Spring return
R Friction brake
Special model
Technical details may vary based on configuration or application! Technical data subject to change without notice!
228
Foot Pedal
P8 / PP8
3 /102
175
85
85
195 Cable entry M20
300
9
(4 x M8)
5,5
(4 x M5x50)
Mounting outside 90
80
Mounting inside
155
115
Technical details may vary based on configuration or application! Technical data subject to change without notice!
229
Foot Pedal
P7 / PP7
The Foot Pedal P7 / PP7 is a rugged switching devices for footing applications. The Foot Pedal
is resistant to oil, maritime conditions e.g. offshore /vessels, UV radiation typically from the sun.
Technical data
Example
P7 -1 Z P -A01 P124 -X
Basic unit
P7 Foot Pedal
Reinforced version
Detent
Without
R2 0-2
R3 0-3
R4 0-4
R11 1-0-1
R22 2-0-2
Direction 1-2
2 2 contacts z.B.
Z Spring return
R Friction brake
Special model
230
Foot Pedal
P7 / PP7
3 /100
0 5
25 17
12,
5°
25°
12,5°
165
90
48
Cable entry M20
47 195
9 5,5
(4 x M8) (4 x M5x50)
Mounting outside 90
80
Mounting inside
115
Technical details may vary based on configuration or application! Technical data subject to change without notice!
231
Control Unit
KST 31 swiveling
Consoles:
The plastic consoles can be equipped with custom command and indicating
devices.
Driver's Seat:
The comfortable Driver's Seat KFS 11 is equipped with a spring loaded hy-
draulic vibration absorption system, including weight adjustment, air-perme-
able textile cover, arm rests and head rest.
Surface treatment:
Base coat and textured varnish
Standard colour RAL 7035 light grey in combination with RAL 7016 anthra-
cite
Example
KST311 -U2 -M1 -F3 -LK3 / KFS 11 / V85 / V85 / KL / X
Basic unit
variant 2
Base unit
U2 Swiveling 90° left, 180° right with detent incl. 2-step release
U4 Non swiveling
Attachments
USB USB-plug socket 2-fold, 1 x 1,5 A (mounted in the left storage compartment)
F3 Footrest KBF/716
Driver's Seat
KFS9*
KFS10*
KFS12*
Technical details may vary based on configuration or application! Technical data subject to change without notice!
232
Control Unit
KST 31 swiveling
... More command and indicating devices (see page 142 and 265)
Wiring
KLV On SPS (SPS provision) with single wire 1 mm2 each terminal
KLVA External wiring single wire highly flexible 1,5 mm2, 5 m long each terminal
Special model
X Special painted
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
233
Control Unit
KST 31 swiveling
820
160 500 160 40°
horizontal adjustment
seat with equipment boxes
100 100
horizontal adjustment
KFS 11 of equipment boxes equipment
30 30 boxes
90°
deg. hinged
30
weight loaded
1140 ±30*
vertical
adjustment
equipment
boxes
30
510 ±30*
72
334 ±130*
550
612 ±30*
180°
Positioning of devices 90°
on customer request
10°
equipment
Variante 2: inlay with deepening boxes
direction of view
swiveling
R5
10
160
0
R53
520
floor mounting
300
240
*adjustable
Technical details may vary based on configuration or application! Technical data subject to change without notice!
234
Traversing Unit
LK3
The LK 3 manual traversing unit can be used as an option for our Control Unit KST31. The
traversing unit and the turning device can be conveniently unlocked with just one lever. A floor
recessed version and a floor mounted version are available.
Surface treatment:
Primer and textured top coat
Standard color RAL 9011 black or 7035 light gray
Example
LK3A -1 -940 -1 -X
Basic unit
Rotation unit
Travel
940 mm
Color
Special model
X Special painted
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
235
Traversing Unit
LK3
3/
183,3
127
480 100 1460
Assembly construction
127
590 1570
travel ±470mm
seat mounting
216
590
358
90°
180°
direction of view
M8
floor mounting
Floor mounting
Assembly installation 300 300 300 300 300
M8 countersunk screw
270
250
270
Floor mounting
Assembly construction
Ø13 for M12 cylinderhead screw 450 450 450
Technical details may vary based on configuration or application! Technical data subject to change without notice!
236
Control Unit
KST 30 swiveling
Inner consoles:
The plastic consoles can be height-adjusted to match joysticks of any size.
In addition consoles can be equipped with custom command and indicating
devices.
Outer consoles:
The outer metal consoles feature foldable top covers, including mechanical
fixation to keep cover in open position. Internal terminal strips can easily be
accessed be removeable side covers. Command and indicating devices can
be added based on customer’s choice. Also special sizes and shapes of outer
consoles are available on request.
Driver's Seat:
The comfortable Driver's Seat KFS 11 is equipped with a spring loaded hy-
draulic vibration absorption system, including weight adjustment, air-perme-
able textile cover, arm rests and head rest.
Surface treatment:
Base coat and textured varnish
Standard colour RAL 7035 light grey in combination with RAL 7015
slate-grey
Example
KST3011 -U2 -M1 -F3 -LK / KFS 11 / V85 / V85 / KL / X
Basic unit
Base unit
U2 Swiveling 90° left, 180° right with detent incl. 2-step release
U4 Non swiveling
Attachments
F3 Footrest KBF/716
LK Plate for horizontal manual adjustment for control units +/- 250 mm
Driver's Seat
KFS9*
V2023/1 01.01.2023
KFS10*
KFS12*
Technical details may vary based on configuration or application! Technical data subject to change without notice!
237
Control Unit
KST 30 swiveling
... More command and indicating devices (see page 142 and 265)
Wiring
KLV On SPS (SPS provision) with single wire 1 mm2 each terminal
KLVA External wiring single wire highly flexible 1,5 mm2, 5 m long each terminal
Special model
X Special painted
Technical details may vary based on configuration or application! Technical data subject to change without notice!
238
Control Unit
KST 30 swiveling
11/
2017
B
A 790 A Horizontal adjustment
734 of equipment boxes
40° 40 40
30
Horizontal
Vertical adjustment seat
adjustment 100 100
KFS 11 seat
optional
KFS 12 30
630
30 10°
weight loaded
Vertical Inclination
1096 ±30*
adjustment adjustment
equipment of equipment
470 ±30*
boxes boxes
290 ±30*
176 30 10°
M
84
adjus
of fo
550 (KST3001)
790 (KST3011-3041)
90° 180°
180°
90°
1 5 Direction of view 1 5
C
C
3 4 7 8 3 4 7 8
2 6 2 6
Sitz seat
left right
box box
KST 3001
KST 3011-3041
Equipment boxes NOT rotable
Floor mounting
14
* adjustable
Technical details may vary based on configuration or application! Technical data subject to change without notice!
239
Control Unit
KST 19 swiveling
Equipment boxes:
The equipment boxes are vertically and horizontally adjustable. The arrange-
ment of the joysticks, indicators and control devices is customised according
to customer specifications. Cabling is carried out through a cross-member in
the traverse. (Terminal block)
Driver's Seat:
As standard the KST19 is fitted with a KFS10 seat. The seat itself is
fitted with a pneumatic vibration absorption system complete with weight
adjustment to ensure that the comfort level is fitted with armrests and a
headrest. There is the option to have the seat covered with
air-permeable artificial leather.
Surface treatment:
Base coat and textured varnish
Standard colour RAL 7035 light grey, equipment boxes RAL 7016
anthracite
Example
KST19 -U1 -M1 -F3 -LK / KFS 10 / V85 / V85 / KL / X
Basic unit
Base unit
Attachments
F3 Footrest KBF/864
LK Plate for horizontal manual adjustment for control units +/- 250 mm
Driver's Seat
Technical details may vary based on configuration or application! Technical data subject to change without notice!
240
Control Unit
KST 19 swiveling
... More command and indicating devices (see page 142 and 265)
Wiring
KLV On terminal block 4 mm2 with single wire 1 mm2 each terminal
KLV On SPS (SPS provision) with single wire 1 mm2 each terminal
KLVA External wiring single wire highly flexible 1,5 mm2, 5 m long each terminal
Special model
X2 Special painted
Option
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
241
Control Unit
KST 19 swiveling
2/111
2014
Backrest Horizontal
Equipment box Equipment box adjustable adjustment seat
in centre in centre 200 40
less
adjustable adjustable step
±22 ±22 90°
7,5° Horizontal adjustment
seat with equipment boxes
125 125
Monitor mounting Monitor mounting
support rotable support rotable
Vertical adjustment
left or right left or right of equipment boxes
90 176
205 -50 *
KFS 10
12°
Inclination
adjustement
of equipment
boxes
12°
+338
170 658 -288 *
284 ±80 *
90° 180°
min.590
depth adjustment
Floor mounting
14
max. 1050
240
* adjustable
Technical details may vary based on configuration or application! Technical data subject to change without notice!
242
Control Unit
KST 10 swiveling
Equipment boxes:
The equipment boxes are vertically and horizontally adjustable. The arrange-
ment of the joysticks, indicators and control devices is customised according
to customer specifications. Cabling is carried out through a cross-member in
the traverse. (Terminal block)
Special boxes available upon request.
Driver's Seat:
As standard the KST10 is fitted with a KFS11 seat. The seat itself is
fitted with a hydraulic vibration absorption system complete with weight
adjustment to ensure that the comfort level is fitted with armrests and a
headrest. There is the option to have the seat covered with
air-permeable artificial leather.
Surface treatment:
Base coat and textured varnish
Standard colour RAL 9011 black
Example
KST10 -U1 -M1 -F3 -LK / KFS 11 / V85 / V85.1 / KL / X
Basic unit
Base unit
Swiveling 90° left, 180° right with detent incl. 2-step release
U2
(standard)
U4 Non swiveling
Attachments
F3 Footrest KBF/716
Driver's Seat
KFS9*
KFS10*
KFS12*
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
243
Control Unit
KST 10 swiveling
... More command and indicating devices (see page 142 and 265)
Wiring
KLV On terminal block 4 mm2 with single wire 1 mm2 each terminal
KLV On SPS (SPS provision) with single wire 1 mm2 each terminal
KLVA External wiring single wire highly flexible 1,5 mm2, 5 m long each terminal
Special model
X2 Special painted
Option
Technical details may vary based on configuration or application! Technical data subject to change without notice!
244
Control Unit
KST 10 swiveling
2 / 101
Horizontal adjustment
of equipment boxes
25 25
Horizontal adjustment
seat with equipment boxes
770 100 100
swing-up
equipment
KFS 11 boxes
optional 55°
KFS 12
1140 ±30 *
weight loaded
5°10°
510 ±30 *
Inclination
adjustment
of equipment
boxes
72
440 ±125 *
707 ±25 *
with heating
180°
90°
0
1 5 52
n. 0
mi x. 72
3 4 7 8 ma
848
2 6
Direction of view
Floor mounting
14
left seat right
box box
cable inlet Ø100
300
240
* adjustable
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
245
Control Unit
KST 4 swiveling
Equipment boxes:
The sheet steel equipment boxes are vertically and horizontally adjust-
able. The arrangement of the joysticks, indicators and control devices is
customised according to customer specifications. Cabling is carried out
through a cross-member in the traverse. (Terminal block)
Special boxes available upon request.
Driver's Seat:
As standard the KST4 is fitted with a KFS11 seat. The seat itself is fitted with
a hydraulic vibration absorption system complete with weight adjustment to
ensure that the comfort level is fitted with armrests and a headrest. There is
the option to have the seat covered with air-permeable artificial leather.
Surface treatment:
Base coat and textured varnish
Standard colour RAL 9011 black
Example
KST41 -U1 -M1 -F3 -LK / KFS 11 / V64 / V64.1 / KL / X
Basic unit
Base unit
Swiveling 90° left, 180° right with detent incl. 2-step release
U2
(standard)
U4 Non swiveling
Attachments
F3 Footrest KBF/716
Driver's Seat
KFS9*
KFS10*
KFS12*
Technical details may vary based on configuration or application! Technical data subject to change without notice!
246
Control Unit
KST 4 swiveling
... More command and indicating devices (see page 142 and 265)
Wiring
KLV On terminal block 4 mm2 with single wire 1 mm2 each terminal
KLV On SPS (SPS provision) with single wire 1 mm2 each terminal
KLVA External wiring single wire highly flexible 1,5 mm2, 5 m long each terminal
Special model
X2 Special painted
Option
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
247
Control Unit
KST 4 swiveling
2 / 041
Horizontal adjustment
of equipment boxes
25 25
B Horizontal adjustment
seat with equipment boxes
100 100
A 580 A
480 ±25 *
40°
swing-up
equipment
KFS 11
optional boxes
KFS 12 55°
weight loaded
1140 ±30 *
10°
220
5°
510 ±30 *
Inclination
590
adjustment
of equipment
boxes
84
550
370 ±125 *
640 ±25 *
with heating
180°
90°
1 5
3 4 7 8
848 C
2 6
420
Direction of view
Floor mounting
14 left right
box seat box
* adjustable
Technical details may vary based on configuration or application! Technical data subject to change without notice!
248
Control Unit
KST 5 swiveling
Equipment boxes:
The equipment boxes are made from sheet steel and as standard have a hin-
ged lid with locking feature. This allows for easy inspection and maintenance.
The side of the equipment boxes is as standard fitted with an inspection plate
which again is lockable. The arrangement of the joystick, indicators and cont-
rol devices is cutomised according to customer specifications. This combined
with the custom sized and profiled equipment boxes that are available means
that the KST5 is very flexible and customisable solution.
Driver's Seat:
As standard the KST5 is fitted with a KFS11 seat. The seat itself is fitted with
a hydraulic vibration absorption system complete with weight adjustment to
ensure that the comfort level is fitted with armrests and a headrest. There is
the option to have the seat covered with
air-permeable artificial leather.
Surface treatment:
Base coat and textured varnish
Standard colour RAL 7035 light grey
Example
KST51 -U1 -M1 -F3 -LK / KFS 11 / V64 / V64.1 / KL / X
Basic unit
Base unit
Swiveling 90° left, 180° right with detent incl. 2-step release
U2
(standard)
U4 Non swiveling
Attachments
F3 Footrest KBF/716
LK Plate for horizontal manual adjustment for control units +/- 250 mm
Technical details may vary based on configuration or application! Technical data subject to change without notice!
249
Control Unit
KST 5 swiveling
Driver's Seat
KFS9*
KFS10*
KFS12*
... More command and indicating devices (see page 142 and 265)
Wiring
KLV On terminal block 4 mm2 with single wire 1 mm2 each terminal
KLV On SPS (SPS provision) with single wire 1 mm2 each terminal
KLVA External wiring single wire highly flexible 1,5 mm2, 5 m long each terminal
Special model
X1 Special painted
Option
Technical details may vary based on configuration or application! Technical data subject to change without notice!
250
Control Unit
KST 5 swiveling
2/051
2014
Horizontal
B adjustment
of control unit
A 600 A 40° 250 250
Horizontal
adjustment
of seat
100 100
KFS 11
optional
KFS 12
weight loaded
1140 ±30*
Manual
adjustment
of foot rest
360 15
510 ±30*
544
15
84
600 418
25
90
990 580
1200 ( traverse path 500 )
Floor mounting
600
90° 180°
550
1 5
3 4 7 8
130 2 6
Direction of view
1150
1200
630
left right
box box
seat
14
Floor mounting
14 * adjustable
Technical details may vary based on configuration or application! Technical data subject to change without notice!
251
Control Unit
KST 6 swiveling
Equipment boxes:
The equipment boxes are vertically and horizontally adjustable. The arrange-
ment of the joysticks, indicators and control devices is customised according
to customer specifications. Cabling is carried out through a cross-member in
the traverse. (Terminal block)
Driver's Seat:
As standard the KST6 is fitted with a KFS11 seat. The seat itself is fitted with
a hydraulic vibration absorption system complete with weight adjustment to
ensure that the comfort level is fitted with armrests and a headrest. There is
the option to have the seat covered with
air-permeable artificial leather.
Surface treatment:
Base coat and textured varnish
Standard colour RAL 9011 black
Example
KST6 -U2 -M1 -F3 -LK / KFS 11 / V64 / V64.1 / KL / X
Basic unit
Base unit
U4 Non swiveling
Attachments
F3 Footrest KBF/716
LK Plate for horizontal manual adjustment for control units +/- 250 mm
Driver's Seat
KFS9*
KFS10*
KFS12*
Technical details may vary based on configuration or application! Technical data subject to change without notice!
252
Control Unit
KST 6 swiveling
... More command and indicating devices (see page 142 and 265)
Wiring
KLV On terminal block 4 mm2 with single wire 1 mm2 each terminal
KLV On SPS (SPS provision) with single wire 1 mm2 each terminal
KLVA External wiring single wire highly flexible 1,5 mm2, 5 m long each terminal
Special model
X2 Special painted
Option
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
253
Control Unit
KST 6 swiveling
2 / 061
Horizontal adjustment
of equipment boxes
40 40
Horizontal adjustment
800 seat with equipment boxes
100 100
130 540 130
460 ±40 *
40°
KFS 11
optional
KFS 12
1140 ±30 *
weight loaded
15°
Inclination
adjustment
510 ±30 *
of equipment
boxes
72
300 ±140 *
585 ±40 *
with heating
180°
90°
1 5
848 3 4 7 8
500
min. 600
x .
2 6 ma
Direction of view
Floor mounting
14
left right
box seat box
cable inlet Ø100
300
240
* adjustable
Technical details may vary based on configuration or application! Technical data subject to change without notice!
254
Control Unit
KST 8 swiveling
Equipment boxes:
The equipment boxes are vertically and horizontally adjustable. The arrange-
ment of the joysticks, indicators and control devices is customised according
to customer specifications. Cabling is carried out through a cross-member in
the traverse. (Terminal block)
Special boxes available upon request.
Driver's Seat:
As standard the KST8 is fitted with a KFS11 seat. The seat itself is fitted with
a hydraulic vibration absorption system complete with weight adjustment to
ensure that the comfort level is fitted with armrests and a headrest. There is
the option to have the seat covered with
air-permeable artificial leather.
Surface treatment:
Base coat and textured varnish
Standard colour RAL 9011 black
Example
KST8 -U1 -M1 -F3 -LK / KFS 11 / V64 / V64.1 / KL / X
Basic unit
Base unit
U4 Non swiveling
Attachments
F3 Footrest KBF/716
Driver's Seat
KFS9*
KFS10*
KFS12*
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
255
Control Unit
KST 8 swiveling
... More command and indicating devices (see page 142 and 265)
Wiring
KLV On terminal block 4 mm2 with single wire 1 mm2 each terminal
KLV On SPS (SPS provision) with single wire 1 mm2 each terminal
KLVA External wiring single wire highly flexible 1,5 mm2, 5 m long each terminal
Special model
X2 Special painted
Option
Technical details may vary based on configuration or application! Technical data subject to change without notice!
256
Control Unit
KST 8 swiveling
2 / 081
2014
Horizontal adjustment
of equipment boxes
25 25
Horizontal adjustment
840 seat with equipment boxes
100 100
130 580 130
470 ±25 *
40°
swing-up
equipment
KFS 11
optional boxes
KFS 12 55°
1140 ±30 *
weight loaded
5°10°
510 ±30 *
Inclination
adjustment
of equipment
boxes
72
531 ±125 *
800 ±25 *
60
n.6 80
mi x.7
1 5 ma
848 3 4 7 8
2 6
Direction of view
Floor mounting
14
left seat right
box box
* adjustable
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
257
Control Unit
KST 85
Equipment boxes:
The equipment boxes are vertically and horizontally adjustable. The arrange-
ment of the joysticks, indicators and control devices is customised according
to customer specifications. Cabling is carried out through a cross-member in
the traverse. (Terminal block)
Special boxes available upon request.
Driver's Seat:
The comfortable spring mounted seat KFS14 with roller-bearing swivel
systems.
Heating console:
Cover with 2 steps heating (2x2kW 400V AC) with integrated ventilator. The
cover of the heating cover can be tilted forward to reach the terminal block
of the heating and cable execution.
Surface treatment:
Base coat and textured varnish
Standard colour RAL 9011 black
Example
KST85 -M1 / KFS14 / V64 / V64.1 / KL / X
Basic unit
KST85 Control Unit with heating in the console base
Attachments
Driver's Seat
KFS14* (Included in the delivery!)
.... More command and indicating devices (see page 142 and 265)
Wiring
KL Without wiring, but with terminal block built each terminal
KLV On terminal block 4 mm2 with single wire 1 mm2 each terminal
KLV On SPS (SPS provision) with single wire 1 mm2 each terminal
KLVA External wiring single wire highly flexible 1,5 mm2, 5 m long each terminal
Special model
X Special / customer specified
X2 Special painted
Option
258
Control Unit
KST 85
2 / 083
Horizontal adjustment
of equipment boxes
840 .52°
max lination 465 ±25* 25 25
i n c
130 580 130 incl.
Horizontal adjustment
seat with equipment boxes
140 140
KFS 14
636
10°
1210
5°
Inclination
574
adjustment of
equipment
boxes
210 ±125*
820 ±25*
Swivelled one-sided -
90° 90° optionally left or right;
endpoints to lock
Direction of view 1 5
Floor mounting 3 4 7 8
2 6
250
left right
box box
* adjustable
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
259
Control Unit
KST 7
Equipment boxes:
The equipment boxes are made from sheet steel and as standard have a hin-
ged lid with locking feature. This allows for easy inspection and maintenan-
ce. The side of the equipment boxes is as standard fitted with an inspection
plate which again is lockable. The arrangement of the joystick, indicators
and control devices is customised according to customer specifications.
This combined with the custom sized and profiled equipment boxes that are
available means that the KST7 is very flexible and customisable solution.
Driver's Seat:
The tipped spring mounted seat KFS4 is fit with an hydraulic
vibration absorption system incl. weight adjustment. With the folding spring
mounted seat you can also arrive your workplace in small cabins.
Base plate:
The cran control unit is available with or without base plate.
Surface treatment:
Base coat and textured varnish
Standard colour RAL 7035 light grey
Example
KST7 -1 / KFS11 / V64 / V64.1 / KL / X
Basic unit
Base plate
3 With base plate with apron for Driver's Seat KFS9, KFS11...
Driver's Seat
KFS 2*
KFS 11*
KFS 9*
... More command and indicating devices (see page 142 and 265)
Technical details may vary based on configuration or application! Technical data subject to change without notice!
260
Control Unit
KST 7
Wiring
KLV On terminal block 4 mm2 with single wire 1 mm2 each terminal
KLV On SPS (SPS provision) with single wire 1 mm2 each terminal
KLVA External wiring single wire highly flexible 1,5 mm2, 5 m long each terminal
Special model
X2 Special painted
Option
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
261
Control Unit
KST 7
2/071
2014
Direction of view B
290 A 290
KFS 2
780...990
650...740
X
750
570
Cutting Base plate
for KFS 2
18
30
180
220
340
250 250
62 300 300 260...430
1030
80
180
220
340
250 250
62 375 375
1180
Cutting Without
200x260 base plate 320
500
20
30
9
340
610...780
300
320
View X
25
Technical details may vary based on configuration or application! Technical data subject to change without notice!
262
Housing for our switching devices
220 x 335 x 115 200 x 292 x 108 Colour altern. RAL 9011 black 1,65 l 220 x 335
220 x 465 x 115 200 x 432 x 108 Colour altern. RAL 9011 black 2,24 l 220 x 465
250 x 255 x 120 236 x 243 x 110 2,65 l 250 x 255
250 x 400 x 120 236 x 386 x 110 3,65 l 250 x 400
250 x 600 x 120 236 x 586 x 110 5,24 l 250 x 600
Accessory parts
Technical details may vary based on configuration or application! Technical data subject to change without notice!
263
Attachment for Control Unit,
portable control units and housings
Contact- Weight
Command and indicating devices 22 mm (Siemens Typ 3SU) incl. indicating label Type
complement KG
Push button 1S 0,040 D
Selector switch 0-1 2 positions 1S 0,050 W
Selector switch 1-0-2 3 positions 2S 0,060 W
Attachments
Drilling 22 mm
Blind plug 22 mm
Cutouts for display devices
Microphone with gooseneck
Power supply 230 V/24 V DC for Driver's Seat
Profinet switch
Technical details may vary based on configuration or application! Technical data subject to change without notice!
264
Ordering information
Equipment box left Pos. Type Colour Label text (max. Plant Desti- Notes
No. 2 x 12 characters ref. nation
1
3
1
3 4 4
2
5
1 8 6
2 9 7
3 10 15 20 8
4 11 16 21 9
5 12 17 22 10
6 13 18 23 11
7 14 19 24
12
13
14
15
16
Maximum installation of command and
indicating devices 22 (see p.142 & 265) 17
in our control units and housings if our
Multi-Axis Controllers V62 (see p.72) are
used. Additional command and indicating 18
devices can be installed of Multi-Axis Con-
trollers V64 or V11 (see p.72 or p.89) are
used. (please enquire) 19
20
21
22
23
24
KST3 1 - 6, 8 - 13, 15 - 18 16
KST41/181 1 - 5, 10 - 12 8
KST42/182 1 - 5, 8 - 12, 15 - 17 13
KST51/122 3 - 7, 10 - 14, 15 - 19, 20 - 24 20
KST52/53/54/152/154 1 -24 24
V2023/1 01.01.2023
KST6 3 - 4, 10 - 11, 15 - 16 6
KST7 1 - 24 24
KST75 1 - 19 19
Technical details may vary based on configuration or application! Technical data subject to change without notice!
265
Ordering information
Pos. Type Colour Label text (max). Plant Desti- Notes Equipment box right
No. 2 x 12 characters ref. nation
1
3
5
4
7 8
5 6
6
32 25
7
33 26
8
44 39 34 27
9
45 40 35 28
10
46 41 36 29
11
47 42 37 30
12
48 43 38 31
13
14
15
16
Maximum installation of command and
17 indicating devices 22 (see p.142 & 265)
in our control units and housings if our
Multi-Axis Controllers V62 (see p.72) are
18 used. Additional command and indicating
devices can be installed of Multi-Axis Con-
trollers V64 or V11 (see p.72 or p.89) are
19 used. (please enquire)
20
21
22
23
24
266
Ordering information
KST8, 85
Equipment box left Pos. Type Colour Lable text (max). Plant Desti- Notes
No. 2 x 12 characters ref. nation
Max. 6 pcs. 1
installation
of command
and indicating 2
1 3 5
devices 22 (see
p.142 & 265) or 3
2 4 6 1 pcs. monito-
ring device
72 x 72mm 4
5
1
Multi-Axis Con-
3 4 troller V64 (see 6
p.72) or V11
2 (see p.89)
7
Max. 3 pcs. 9
installation
of command
and indicating 10
devices 22 (see
p.142 & 265) 11
Place to put on 12
devices
Max. 6 pcs. 13
installation
of command
and indicating 14
13 15 17
devices 22 (see
p.142 & 265) or 15
14 16 18 1 pcs. monito-
ring device
72 x 72mm 16
17
5
Multi-Axis Con-
7 8 troller V64 (see 18
p.72) or V11
6 (see p.89)
19
20
19 20 21 Max. 3 pcs. 21
installation
of command
and indicatin 22
devices 22 (see
p.142 & 265) 23
Place to put on 24
devices
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
267
Ordering information
KST10
Equipment box left Pos. Type Colour Label text (max. Plant Desti- Notes
No. 2 x 12 characters ref. nation
1
Max. 3 pcs. 2
installation of
1 2 3 command and
indicating 3
devices 22 (see
p.142 & 265) 4
1
6
3 4 Multi-axis
Controller V11, 7
2 V14, V25, V85
9
4 5 6
Max. 3 pcs.
installation of
command and
indicating
devices 22 (see
p.142 & 265)
13
Max. 3 pcs. 14
installation of
10 11 12 command and
indicating 15
devices 22 (see
p.142 & 265) 16
17
5
18
7 8 Multi-axis
Controller V11,
6 V14, V25, V85
13 14 15
Max. 3 pcs.
installation of
command and
indicating
devices 22 (see
p.142 & 265)
Technical details may vary based on configuration or application! Technical data subject to change without notice!
268
Ordering information
KST19
Equipment box left Pos. Type Colour Label text (max. Plant- Desti- Notes
No. 2 x 12 characters ref. nation
Multi-Axis Controller V11, V14, V25, V85 1
see p. 63, 50, 25, 10
2
max. 7 installations of command and indi-
cating devices 22 (see p.142 & 265) 3
4
+
3
+
4 +
2 5
+
5
+1
1 6
+
6
3 + 4 7
+
7
2 8
26
max. 7 installations of command and indi-
cating devices 22 (see p.142 & 265) 27
+
+
26
27 28
+
28
+
25
+
29
5 29
30
+
30
7 + 8
31
+
31
6
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
269
Ordering information
KST30
Equipment box left Pos. Type Colour Lable text (max). Plant Desti- Notes
No. 2 x 12 characters ref. nation
1
2
1 3
4
3 4 5
6
2
7
1 2 3 9
10
4 5 6 11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
7 13 19 25 31 37 28
8 14 20 26 32 38 29
30
9 15 21 27 33 39
31
10 16 22 28 34 40 32
29 35 41 33
11 17 23
34
12 18 24 30 36 42
35
36
37
38
39
40
41
42
KST3011 1 - 24 24
KST3031 1 - 36 36
KST3041 1 - 42 42
Technical details may vary based on configuration or application! Technical data subject to change without notice!
270
Ordering information
KST30
Equipment box right Pos. Type Colour Lable text (max). Plant Desti- Notes
No. 2 x 12 characters ref. nation
1
2
5 3
4
7 8 5
6
6
7
1 3 5 9
10
2 4 6 11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
7 13 19 25 31 37 29
30
8 14 20 26 32 38
31
9 15 21 27 33 39 32
33
10 16 22 28 34 40
34
11 17 23 29 35 41
35
12 18 24 30 36 42 36
37
38
39
40
41
42
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
271
Driver's Seat
KFS12
Technical data:
Suspension stoke 80 mm
Example
KFS12 -A1 -S1
Basic unit
Attachments
U Console (base)
Technical details may vary based on configuration or application! Technical data subject to change without notice!
272
Driver's Seat
KFS12 Driver seat KFS 12
Horizontal
adjustment
100 100
630
1155 ±50 *
305 ±50 *
lumbar support
220
10,50
225 Mounting base 225
dimensions
390 265
Special equipment 9
216
Mounting dimensions
of the seat rails
358
730
Armrest 100mm wide
10
20
555 95
2 x 215 = 430
20
460
215
3 x 330 = 690
Countersink DIN74-A4 * adjustable
720
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
273
Driver's Seat
KFS11
Technical data
Suspension stoke 80 mm
Height adjustment 65 mm
Example
KFS11 -A1 -S1
Basic unit
Attachments
K Headrest
U Console (base)
Technical details may vary based on configuration or application! Technical data subject to change without notice!
274
Driver's Seat
KFS11 Fahrersessel KFS 11
590
560 .... 970
40° 490
Längsverstellung
100 100
290 ±32,5 *
630
1140 ±32,5 *
220
10,50
225 Befestigungsmaße 225
des Unterbaus
390 265
Sonderausführung 9
216
Befestigungsmaße
der Sitzschiene
358
730
Armlehnen 100mm breit
10
20
1140 ±32,5 *
Bodenplatte
555 95
2 x 215 = 430
20
460
215
3 x 330 = 690
Senkung DIN74-A4 * einstellbar
720
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
275
Driver's Seat
KFS10
Technical data:
Suspension stoke 80 mm
50 - 130 kg (mechanical)
Horizontal adjustment
Example
KFS102 -A1 -L2 -S2 -R1
Basic unit
KFS101 Driver's Seat with air-permeable artificial leather cover black with V-cut
Attachments
K Headrest
U Console (base)
Technical details may vary based on configuration or application! Technical data subject to change without notice!
276
Driver's Seat
KFS10 2/143
2014
620
510 -160
90°
ste 530
ple
ss
Horizontal
adjustment seat
with backrest
40 200
600
weight loaded
970 ±20*
Vertical adjustment
mechanical/manual
60
Horizontal
370 ±20*
adjustment seat Pneumatic
with suspension system suspension system
80 80 by compressor
480...610
160
Horizontal adjustment
only seat cushion Seat cushion
V-cutout
9
152
304 201
540
* adjustable
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
277
Driver's Seat
KFS9
The Driver's Seat KFS9 is ergonomically designed and provides a high grade
of comfort. The Driver's Seat is a low level mechanical suspension seat with
an oil-hydraulic vibration absorption system with weight adjustment. Upon
request, a pneumatic vibrating system with weight adjustment is available.
All adjustment controls are positioned ergonomically within easy access.
The metal parts are protected against corrosion and painted black.
Technical data
Suspension stoke 80 mm
50 - 130 kg (mechanical)
Example
KFS 92 -A1 -L2 -S1 -P
Basic unit
Attachments
K Headrest rain
U Console (base)
Technical details may vary based on configuration or application! Technical data subject to change without notice!
278
Driver's Seat
KFS9
2/141
2014
horizontal
adjustment
80 80
600
weight loaded
910 ±30*
310 ±30*
304 322
Seat cushion
v-cutout
Mounting dimensions
of the seal rails
322
9
152
304
201
540
* adjustable
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
279
Driver's Seat
KFS14
The Driver's Seat KFS14 is a static seat with ergonomically designed and pro-
vides a high grade of comfort. The Driver's Seat is equipped with roller-be-
aring swivel system. All adjustment controls are positioned ergonomically
within easy access. The metal parts are protected against corrosion and
painted black.
Technical data:
Height adjustment 65 mm
Example
Basic unit
Attachments
K Headrest
Technical details may vary based on configuration or application! Technical data subject to change without notice!
280
Driver's Seat
KFS14
Swiveling up to 490
autom. locking Max. 52°
foltabel 60° incl. inclination
Horizontal adjustment
115 115
636
1062
tilt adjustment
Backrest
adjustment
12°
300
206
Rotation device
220
225 10,50
390 225
265
358
8,5
8,5 60
Mounting dimensions
of the seat rails 9
216
Special equipment
730
Armrest 100mm wide
10
20
555 95
1062
2x215 = 430
215
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
281
Driver's Seat
KFS4
The Driver's Seat KFS4 has stepless high adjustment by means of a gas-loaded spring and an
oil-hydraulic vibration absorption system with weight adjustment. The backrest can be tilted,
forwards into the cushion, which in turn can then be tilted 90° sideways. All functions are per-
formed by a simple lever operation. The metal parts are protected against corrosion and painted
black.
Technical data:
Suspension stoke 80 mm
Example
KFS 42 -A1
Basic unit
Attachments
Technical details may vary based on configuration or application! Technical data subject to change without notice!
282
Driver's Seat
KFS4
420
410
Floor mounting
290
210
5
8,
150
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
283
Driver's Seat
KFS2
The Driver's Seat KFS2 has stepless high adjustment by means of a gas-loaded spring. The
backrest can be tilted, forwards onto the cushion, which in turn can then be tilted 90° sideways.
All these functions are performed easily via levers.
Technical data
Example
KFS 22
Basic unit
Technical details may vary based on configuration or application! Technical data subject to change without notice!
284
Driver's Seat
KFS2
2/130
2014
120 400...470
160...260
320...390
750...960
420...540
54
275 200
Floor mounting
14
120
160
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
285
Portable Control Unit
TS1
The Portable Control Unit TS1 is used for controlling and monitoring the necessary equipment.
The chest panel and straps enable the operator to carry it without becoming tired. An adjustable
carrying strap can also be fitted for use without the chest plate.
Surface treatment:
Priming and structure-finishing paint
Standard colour RAL 7032 pepple-grey
Technical data:
Example
Basic unit
TS1 Portable Control Unit with chest plate and straps
TS11 Portable Control Unit with straps
Attachment
SB 1 Legs for control unit alu-tube 2 pieces
SB 2 Legs for control unit stainless steel-tube V2 A 2 pieces
RH 1 Reeling hooks for control unit stainless steel V2 A
K1 Cable entry M32 cable 11 - 21 mm
K2 Cable entry M40 cable 19-28 mm
K3 Cable entry 180° swiveling M32 cable 11-21 mm
HS 1 Plug in socket 16-pole male insert HAN 16E without wiring
HB 1 Connector 16-pole female insert HAN 16E without wiring
HS 2 Plug in socket 24-pole female insert HAN 24E without wiring
HB 2 Connector 24-pole female insert HAN 24E without wiring
HS 3 Plug in socket 32-pole male insert HAN 32E without wiring
HB 3 Connector 32-pole female insert HAN 32E without wiring
Indicating labels not engraved for multi-axis-/ Single-Axis Controller
Special model
X Special / customer specified
X1 Housing antistatic design < 109 Ohm/cm
X2 Finishing colour yellow RAL 1021
Technical details may vary based on configuration or application! Technical data subject to change without notice!
286
Portable Control Unit
TS1
250
106
120
442
Cable entry
with anti-kink protection
and stain relief or connectors
1 5
3 47 8
2 6
265
305
Direction of view
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
287
Portable Control Unit
TS2
The Portable Control Unit TS2 is used for controlling and monitoring the necessary equipment.
The chest panel and straps enable the operator to carry it without becoming tired. An adjustable
carrying strap can also be fitted for use without the chest plate.
Surface treatment:
Priming and structure-finishing paint
Standard colour RAL 7032 pepple-grey
Technical data:
Example
TS2 -SB 1 -RH 1 -K 3 -HS 1 / V... / KLS / X
Basic unit
Attachment
More command and indicating devices (see page 142 and 265)
Technical details may vary based on configuration or application! Technical data subject to change without notice!
288
Portable Control Unit
TS2
Cable Oelflex Classic FD 810 P 18 x 1 mm2 13,9 mm Ø -5°C to +70°C Each meter
Cable Oelflex Classic FD 810 P 25 x 1 mm2 16,4 mm Ø -5°C to +70°C Each meter
Cable Oelflex Classic FD 810 P 34 x 1 mm2 18,9 mm Ø -5°C to +70°C Each meter
Special model
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
289
Portable Control Unit
TS2
250
114
140
335
Cable entry
with anti-kink protection
and stain relief or connectors
220
Direction of view
Technical details may vary based on configuration or application! Technical data subject to change without notice!
290
Portable Control Unit
TS3
The Portable Control Unit TS3 is used for controlling and monitoring the equipment. The
abdominal belt enable the operator to carry it without becoming tired. The equipment can be
individually designed.
Technical data:
Example
TS3 -1 -K1 -G1 / V... / KLS / X
Basic unit
Colour
1 Red / black
2 Gray / black
Attachment
G1 Engraving plate
More command and indicating devices (see page 142 and 265)
Cable Ölflex Classic FD 810 P 18 x 1 mm2 13,9 mm Ø -5°C bis +70°C Each meter
Cable Ölflex Classic FD 810 P 25 x 1 mm2 16,4 mm Ø -5°C bis +70°C Each meter
Cable Ölflex Classic FD 810 P 34 x 1 mm2 18,9 mm Ø -5°C bis +70°C Each meter
Cable Ölflex Crane 18 x 1 mm2 19,2 mm Ø -25°C bis +80°C Each meter
Cable Ölflex Crane 24 x 1 mm2 22,1 mm Ø -25°C bis +80°C Each meter
Cable Ölflex Crane 36 x 1 mm2 26,1 mm Ø -25°C bis +80°C Each meter
Special model
Technical details may vary based on configuration or application! Technical data subject to change without notice!
291
Portable Control Unit
TS3
2/
2020
130
276 185
300
Direction of view
215
180
cable entry
with anti-kink protection
Technical details may vary based on configuration or application! Technical data subject to change without notice!
292
Signal-Cam Controller
NU1
The Signal-Cam Controller NU 1 is used as a signal and annunciation switch in HV systems. This
rugged switching device has cam discs made of insulation material that can be set at 10° inter-
vals. The Signal-Cam Controllers are designed to permit series assembly, which can be operated
simultaneously.
Technical data
250 V DC 2A 1A 20 ms
125 V DC 4A 3A 20 ms
50 V DC 6A 6A 20 ms
30 V DC 10A 10A 20 ms
250 V DC15 6A 6A
Example
NU1 -4 -4 -F2 -Z -W -A -X
Basic unit
NU 1 Signal-Cam Controller
2 2 contacts
4 4 contacts
6 6 contacts
8 8 contacts
10 10 contacts
12 12 contacts
14 14 contacts
16 16 contacts
2 2 contacts
4 4 contacts
6 6 contacts
8 8 contacts
10 10 contacts
12 12 contacts
14 14 contacts
16 16 contacts
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
293
Signal-Cam Controller
NU1
NU1 -4 -4 -F2 -Z -W -A -X
Option
Z Spring return
GH Link lever
Aluminium housing
Special model
Technical details may vary based on configuration or application! Technical data subject to change without notice!
294
Signal-Cam Controller
NU1
3 / 403
Plug in connection
Link lever Plastic cover 4,8x0,8 68
5,70
(80 mm wide)
M8
Screw connection
M3,5
41
100
35
102
94
40
Mounting at top
72
56
M6
or 12 mm hexagonal
12h9 standard
15,50
Ø7
C 40
Mounting angles
31
Aluminuim housing
protection IP 65
G
F
No. of
Type Dim. A Dim. C Housing Dim. F Dim. G
contacts
180 2 2 7 74
232 4 4 70 95
8 8 113 138
10 10 134 159
M6 12 12 155 180
111
16 16 197 222
40
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
295
DC Contact
SO 1.10 Normally open
SS 1.10 Normally closed
The DC Contact is used for signalling and annunciation applications. The snap-action mecha-
nism prevents slow contact opening when the plunger is operated slowly. Quenching of the arc
that occurs with DC is supported by two-capacity permanent magnets.
These are arranged so that the polarity can be ignored when connecting +/- cabling. However,
the polarity of the quenching magnets must be noted when installing the contacts to prevent
the magnets adversely affecting each other. Contacts in four different colours are available for
polarity identification of the magnets when fitted.
The contact may only be installed on non-magnetisable materials with screw, etc. made of
non-ferrous metal.
The self-cleaning silver contacts are designed for low switching frequency, low currents and
voltages. Gold coated contacts can be supplied (approx 0,2µ), less than 42 Volt required. The
screw connection M3.5 at the side is suitable for 2 conductors max. 2,5 mm². The plug-in
connection at the top 4.8 x 0.8 mm DIN 46247.
Several contacts can be plugged on the top of each other and operated jointly. The plug-type
terminals are then only accessible on the top unit. The contacts can be provided with shock
protection to DIN VDE 0106 Part 100.
Example
Switching capacity
NC NO Time constant
250 V DC 2A 1A 20 ms
125 V DC 4A 3A 20 ms
50 V DC 6A 6A 20 ms
30 V DC 10A 10A 20 ms
250 V AC 15 6A 6A
Technical data
Electrical service life 50.000 operating cycles (at 2A 250 V DC L/R 20 ms)
SO 1.10 -B -R -F -X
Basic unit
Attachment
R Roller lever
Special model
Technical details may vary based on configuration or application! Technical data subject to change without notice!
296
DC Contact
SO 1.10 Normally open
SS 1.10 Normally closed
3 / 401
Shock protection
9
10
4,8
5,7
10,2 0,8
1,5
2 Reversing point
3 Switching point
23
Normally Normally
closed (NC) open (NO)
8
1 2 3 1 2 3
10,2
8,9
10,5
10,6
7
11,4
9
3,2
1,4 4,8
Contact travels ± 0,2
3,2 20
47
55
Operating force
62 2,2 N ± 20 %
Normally Normally
closed (NC) open (NO)
1 2 3 1 2 3
16,5
19,3
19,5
20,6
21
23
23
8
19
Contact travels ± 0,2
Normally Normally
closed (NC) open (NO)
1 2 3 1 2 3
27,3
27,6
28,8
29,2
31,5
31,5
21
8
,9
Technical details may vary based on configuration or application! Technical data subject to change without notice!
297
Gear Limit Switch
GE1 / GE2
The Gear Limit Switch GE1 / GE2 is a rugged switching device designed for hoisting applica-
tions. The modular micro changeover contacts with positive opening operation. The device is
programmed by means of stepless adjustment of double cam discs, which can be provided from
18° to 192° contact discs according to the switching program required. The type GE 1 (standard)
includes a double cam disc conjointly lockable. The type GE 2 (standard) includes a double cam
disc conjointly lockable.
Technical data
Example
GE 1 -10 -4 -P -U7 -P -18 -30 -60 -90 -X
Basic unit
Gearing
11:1 to 20:1
21:1 to 40:1
41:1 to 80:1
81:1 to 160:1
161:1 to 320:1
Limit switch
2 2 contacts
3 3 contacts
4 4 contacts
5 5 contacts
6 6 contacts
7 7 contacts
8 8 contacts
9 9 contacts
10 10 contacts
11 11 contacts
12 12 contacts
13 13 contacts
14 14 contacts
15 15 contacts
16 16 contacts
298
Gear Limit Switch
GE1 / GE2
Aluminium housing
Program-disc
18°, 24°, 30°, 36°, 45°, 60°, 75°, 90°, 110°, 120°, 176°, 192°
Example:
Contact n:
Illustration
Special model
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
299
Gear Limit Switch
GE1 / GE2
3 / 201
41
E
70
41
F
M6
C
H
B for GE2
A for GE1
D
Cable entry
I
Cover plate 4 ...8
33,9
36,5 ...44,5
32
No. of Dim. A Dim. B 12 h9
Type contacts (GE1) (GE2) G
1 1 32 35,5
2 2 38,5 42
3 3 44,5 48
4 4 50,5 54
5 5 56,5 60
6 6 63 66,5
7 7 69 72,5
8 8 75 78,5
9 9 81 84,5
10 10 87 90,5
Technical details may vary based on configuration or application! Technical data subject to change without notice!
300
Naval Cruise Controller
AZ1
The Naval Cruise Controller AZ1 is a rugged switching device. The modular design enables the
switching device to be used universally.
The design includes:
The mechanical control-system for the engine speed 0-max. rpm. switching angle 60 degrees
with pressure print at 7 degrees and friction brake direction 0-2. The mechanical control-system
for the steering left/right direction 13-14, 360 degrees with pressure points 4x90 degrees and
friction brake.
Technical data
AZ1 -L E2112 -X
Basic unit
Options
Interface
Voltage output
Output power
Special model
Technical details may vary based on configuration or application! Technical data subject to change without notice!
301
Naval Cruise Controller
AZ1
3/051
68
°
° int7
60 po
nt
te
de
50
197
Installation depth
without distance
141
washer
66
41
Installation
depth with
distance washer
136
155
Edition:
with motor rosseting control system
Friction break
steering
Friction brake
engine speed
136
13 14
Steering 360°, with detent 4 x 90°
Hole pattern
102,50
289,50
+1
145
137
Plug-in socket/
connector
4,5
Technical details may vary based on configuration or application! Technical data subject to change without notice!
302
Double-Handle Controller
D3
Technical data
Example
D3 S5 Q / Q -2 R P +3 R P -B -A05 P484 +A05 P484 -E1292 -S... -X
Basic unit
D3 Double-Handle Controller
Control-handle extended
S5 -20 mm
Cover housing
B Cover housing
Interface
E1292 Voltage output 0...5...10 V
Plug connectors
V2023/1 01.01.2023
Special model
X Special / customer specified
Technical details may vary based on configuration or application! Technical data subject to change without notice!
303
Double-Handle Controller
D3
Basic unit
Control-handle extended* 1 3
Standard 148 mm*
S5 -20 mm
S8 +20 mm
Grip-control-handle left
Knob
D Push button
Q T-grip
Grip-control-handle right
Knob
D Push button
Q T-grip
QD T-grip with push button side
2 2 contacts e.g.
A05 MS21
A050 MS21-0
R Friction brake
Technical details may vary based on configuration or application! Technical data subject to change without notice!
304
Double-Handle Controller
D3
Cover housing
B Cover housing
Special model
X Special / customer specified
Voltage outputs
Supply voltage 11,5-32 V DC
Wiring Cable 300 mm long without plug connector
Optional with plug connector (standard plug connectors see page 125) S
0...5...10 V per axis
1 axis E129 1
2 axis 2
10...0...10 V per axis
1 axis E141 1
2 axis 2
-10...0...+10 V per axis
1 axis E140 1
2 axis 2
Voltage output with other value on request!
Current outputs
Supply voltage 18-36 V DC
Wiring Cable 500 mm long without plug connector
Optional with plug connector (standard plug connectors see page 125) S
4...12...20 mA per axis
1 axis E209 1
2 axis 2
20...4...20 mA per axis
V2023/1 01.01.2023
1 axis E217 1
2 axis 2
Technical details may vary based on configuration or application! Technical data subject to change without notice!
305
Double-Handle Controller
D3
1 / 165
T- grip
D=Push button
25
° 60
60 °
148
86
Adjusting screw
26
103
Cable import
Filter plug
80 101
Hole pattern
100
157
82 154
6
84
Technical details may vary based on configuration or application! Technical data subject to change without notice!
306
Single-Axis Controller
S3
The Single-Axis Controller S3 is a rugged switching device for hoisting applications. The mo-
dular design enables the switching device to be used universally. The Single-Axis Controller is
resistant to oil, maritime conditions e.g. offshore /vessels, UV radiation typically from the sun
Technical data
Example
S3L S5 Q -2 R P -B -A05 P484 -E1291 -S... -X
Basic unit
Control-handle extended
S5 -20 mm
Q T-grip
Axis 1
R Friction brake
P Potentiometer
Cover housing
B Cover housing
Interface
Plug connectors
Special model
Technical details may vary based on configuration or application! Technical data subject to change without notice!
307
Single-Axis Controller
S3
Basic unit
S3L S3R
Control-handle extended
1 3
Standard 148 mm*
S5 -20 mm
S8 +20 mm
Grip
Knob
D Push button
Q T-grip
2 2 contacts z.B.
3 3 contacts A98
A05
A050
R Friction brake
Cover housing
B Cover housing
Potentiometer output
Special model
Technical details may vary based on configuration or application! Technical data subject to change without notice!
308
Single-Axis Controller
S3
Voltage output
Supply voltage 11,5-32 V DC
Optional with plug connector (standard plug connectors see page 125) S
0...5...10V
1 axis E112 1
10...0...10V
1 axis E141 1
-10...0...+10V
1 axis E140 1
Current output
Optional with plug connector (standard plug connectors see page 125) S
4...12...20 mA
1 axis E209 1
20...4...20 mA
1 axis E217 1
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
309
Single-Axis Controller
S3
1 / 213
T - grip
D= Push button
96
25
° 60
60 °
156
86
Adjustment screw
26
103
Filter plug Cable entry
80 101
Hole pattern
100
82
6
154
84
Technical details may vary based on configuration or application! Technical data subject to change without notice!
310
Single-Axis Controller
S23
The Single-Axis Controller S23 is a robust switching device for shipbuilding and electro-hy-
draulic applications. The modular design of the switching device is universally applicable. The
Single-Axis Controller is resistant to oil, maritime conditions e.g. offshore /vessels, UV radiation
typically from the sun.
Technical data
Example
S23L S5 M -3ZP - A050 P134 -X
Basic unit
Control-handle extended
S5 -20 mm
Z Spring return
P Potentiometer
Special model
Basic unit
S23L
S23L S23R
S23R
Control-handle extended 1 1 5 5
Standard 140 mm
1-2
1-2
5-6
5-6
S5 -20 mm
S8 +20 mm
2 2 6 6
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
311
Single-Axis Controller
S23
Knob (standard)
Q T-grip
2 2 contacts z.B.
A0500 MS21-00
Z Spring return
R Friction brake
Special model
Technical details may vary based on configuration or application! Technical data subject to change without notice!
312
Single-Axis Controller
S23
1 / 209
28
M
5° 37,
37, 5°
140
140
36
Cover plate
IP 00
Potentiometer T 396
70
14 16 B
90
84
122
Hole pattern
98,5
82
5,5
or M
5
No. of
Type Dim. B
contacts
57 1 1 25
72 2 2 31
3 3 36
4 4 42
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
313
Single-Axis Controller
S27
The Single-Axis Controller S27 is a hall sensor switching device designed for electro-hydraulic
and remote controlled hydraulic. The modular design of the switching device is universally ap-
plicable. The Single-Axis Controller is resistant to oil, maritime conditions e.g. offshore /vessels,
UV radiation typically from the sun.
Technical data
Example
S27L M -Z - E... - S... -X
Basic unit
Knob (standard)
Q T-grip
Z Spring return
R Friction brake
Plug connectors
Special model
1 5
2 6
Technical details may vary based on configuration or application! Technical data subject to change without notice!
314
Single-Axis Controller
S27
Digital Output
Optional with plug connector (standard plug connectors see page 125) S
1 axis E001 1
Optional with plug connector (standard plug connectors see page 125) S
1 axis E104 1
Output options
Characteristic:
Inverse dual 1
Dual 2
Voltage output
Supply voltage 9-32 V DC (*11,5-32 V)
Optional with plug connector (standard plug connectors see page 125) S
1 axis E112 1
0...5...10 V redundant + 2 direction signals + 1 zero position signal (galvanically isolated), supply voltage 11,5 - 32 V DC
1 axis E132 1
10...0...10 V + 2 direction signals + 1 zero position signal (galvanically isolated), supply voltage 11,5 - 32 V DC, sensor redundant
1 axis E136 1
Output options
Characteristic:
Inverse dual *1 1
Dual *1 2
Single *2 5
Technical details may vary based on configuration or application! Technical data subject to change without notice!
315
Single-Axis Controller
S27
Current output
Optional with plug connector (standard plug connectors see page 120) S
0...10...20 mA + 2 direction signals + 1 zero position signal (galvanically isolated), sensor redundant with error monitoring and error signal
1 axis E206 1
20...0...20 mA + 2 direction signals + 1 zero position signal (galvanically isolated), sensor redundant with error monitoring and error signal
1 axis E208 1
4...12...20 mA + 2 direction signals + 1 zero position signal (galvanically isolated), sensor redundant with error monitoring and error signal
1 axis E214 1
20...4...20 mA + 2 direction signals + 1 zero position signal (galvanically isolated), sensor redundant with error monitoring and error signal
1 axis E216 1
Output options
Single 5
Technical details may vary based on configuration or application! Technical data subject to change without notice!
316
Single-Axis Controller
S27
1 / S27
42 80
28
M
5° 37,
37, 5°
140
140
36
Cover plate IP 65
IP 00
49
70
84
122
Hole pattern
98,5
82
5,5
or M
5
57
72
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
317
Control Pedestal
U22/32
The Control Pedestal U22/32 accomodate the devices necessary for control and monitoring.
Ready wired, it can be quickly and easily installed on the sea deck. The housing (pedestal head)
is made of seawater-resistant aluminium.
Surface treatment:
Priming and structure-finishing paint
Standard colour RAL 7032 pepple-grey
Technical data:
Example
U22/32 / N61.../ N62... / H / PW / 2D / PQ / KLV / X
Housing
Masterswitch / Control-Switch
02 4 contacts z.B.
Z Spring return
R Friction brake
Technical details may vary based on configuration or application! Technical data subject to change without notice!
318
Control Pedestal
U22/32
Display devices
Wiring
Special model
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
319
Control Pedestal
U22/32
2/161
2014
160
side-plate side-plate
wide narrow
220
B
985
A A Reed 108x4
670
220
212
A-A 232
side-plate side-plate
wide narrow
Optional
plate
125
250
(Helicoil)
mounting at 170
the bottom
View B
18
Technical details may vary based on configuration or application! Technical data subject to change without notice!
320
Control Pedestal
U23/23
The Control Pedestal U23/23 accomodate the devices necessary for control and monitoring.
Ready wired, it can be quickly and easily installed on the sea deck. The housing (pedestal head)
is made of seawater-resistant aluminium.
Surface treatment:
Priming and structure-finishing paint
Standard colour RAL 7032 pepple-grey
Technical data:
Example
U23/23 / N61.../N62... / H / PW / 2D / PQ / KLV / X
Housing
Masterswitch / Control-Switch
02 4 contacts z.B.
Z Spring return
R Friction brake
Technical details may vary based on configuration or application! Technical data subject to change without notice!
321
Control Pedestal
U23/23
Display devices
Wiring
KLV on terminal block 2,5 mm2 with wire line 0,75 mm2
Special model
Technical details may vary based on configuration or application! Technical data subject to change without notice!
322
Control Pedestal
U23/23
2/163
2014
Protection with
narrow cover
135
135
115
B
902
170
A A
670
Reed 108x4
Floor mounting
flange
18
180
220
A-A
Optional
plate
Gasket
M12x20 deep
(Helicoil)
12
Mounting at
125 li
230
the bottom
Ø9
Mounting
at the top
140
200
250
200
View B
18
V2023/1 01.01.2023
Technical details may vary based on configuration or application! Technical data subject to change without notice!
323
Dealer network
worldwide
Representatives in Germany
Dr.-Ing. Klaus Zimmermann Systemautomation Zimmer-
Ingenieurbüro mann
Hauptstraße 158 Dipl.-Ing. Jan Zimmermann
06493 Harzgerode 0T Hauptstraße 158
Neudorf 06493 Harzgerode 0T Neudorf
Phone: +49 39 48 46 36 4 Phone: +49 39 48 47 42 48 4
ib-zimmermann@gmx.de saz-zimmermann@gmx.de
www.gessmann.com www.gessmann.com
Headquarters
and locations of Gessmann Group
Gessmann Group
Sales office Gessmann Office France
Nicolas Patricot
France 14 rue de la Perruche
78117 Chateaufort
Phone: +33 65 20 74 55 9
nicolas.patricot@gessmann.com
www.gessmann.com
Sales office Gessmann Office Italy
Gabriele Fiore
Italy Via Generale Carlo Alberto
Dalla Chiesa n.45
20816 Ceriano Laghetto (MB)
gabriele.fiore@gessmann.com
www.gessmann.com
Sales office Gessmann Office Norway
Harald Skjønsberg
Norway Nedre ekeberglia 6
3420 Lierskogen
Phone: +47 47 30 26 86
Harald.skjonsberg@gessmann.com
www.gessmann.com
Katalog Deckblatt EN DE 2023 V1.pdf 1 19.12.2022 20:58:57
2023
74207 Leingarten
GERMANY
Eppinger Straße 221
74211 Leingarten