The document provides instructions for installing an IC encoder driver:
1) Plug in the IC encoder and check that it appears as an unidentified device in Device Manager with a "!" mark.
2) Insert the installation CD and run the USB IC card Encoder driver installer.
3) Follow the on-screen prompts, clicking "Next" and "Install" to complete the installation process.
The document provides instructions for installing an IC encoder driver:
1) Plug in the IC encoder and check that it appears as an unidentified device in Device Manager with a "!" mark.
2) Insert the installation CD and run the USB IC card Encoder driver installer.
3) Follow the on-screen prompts, clicking "Next" and "Install" to complete the installation process.
The document provides instructions for installing an IC encoder driver:
1) Plug in the IC encoder and check that it appears as an unidentified device in Device Manager with a "!" mark.
2) Insert the installation CD and run the USB IC card Encoder driver installer.
3) Follow the on-screen prompts, clicking "Next" and "Install" to complete the installation process.
There is a item named’USB Device’ in ‘other devices’branch.
If you see the above it means IC encoder connect no problem, your computer identify it as a new device. There is a ‘!’ mark ahead of it because its driver had not been installed. Light status: 2 red lights. 2. Double from CD ‘Driver>USB IC card Encoder driver’.
You will see the above window.Click ‘Next’
3.Click Next 4.Click Next
3. Click Next
6.Click Install button
4. You will see it start installation
After loading finished click ‘X’ to exit,
5. In the following window computer ask you to install it.
8.
9. 10.
11.
>> .After finished
In your computer if you can’t see
‘USB12 SmartCard Device’ or there is a ‘!’ mark ahead of it, your driver installed failure and any way you can’t use it in hotel lock system