This document summarizes the results of a direct shear strength test conducted on a sandstone sample from 56.50-56.85 meters depth at the SMO location of PT Berau Coal's DDGT-BI-19-02 project. The test was conducted according to ISRM 1981 standards and measured the peak and residual shear strength of the sample under increasing normal stresses. The peak cohesion was 0.075 MPa, peak friction angle was 26.93 degrees, residual cohesion was 0.018 MPa, and residual friction angle was 17.43 degrees.
Original Description:
Original Title
Analisa DS_DDGT-BI-19-02_56.50 - 56.85_Estimasi dari analisis Roclab
This document summarizes the results of a direct shear strength test conducted on a sandstone sample from 56.50-56.85 meters depth at the SMO location of PT Berau Coal's DDGT-BI-19-02 project. The test was conducted according to ISRM 1981 standards and measured the peak and residual shear strength of the sample under increasing normal stresses. The peak cohesion was 0.075 MPa, peak friction angle was 26.93 degrees, residual cohesion was 0.018 MPa, and residual friction angle was 17.43 degrees.
This document summarizes the results of a direct shear strength test conducted on a sandstone sample from 56.50-56.85 meters depth at the SMO location of PT Berau Coal's DDGT-BI-19-02 project. The test was conducted according to ISRM 1981 standards and measured the peak and residual shear strength of the sample under increasing normal stresses. The peak cohesion was 0.075 MPa, peak friction angle was 26.93 degrees, residual cohesion was 0.018 MPa, and residual friction angle was 17.43 degrees.
Customer : PT Berau Coal Date of Received : 05 Februari 2020
Address : Jl. Pemuda No 40 Kec. Tanjung Redeb, Berau, Kaltim Date of Test : 28 November 2020 Project : DDGT-BI-19-02 Date of Analysis : 10 Desember 2020 Location : SMO Tested By : Kurniawan, Gufron, Hardi Standard Method : ISRM 1981 Checked By : Kurniawan