Professional Documents
Culture Documents
Pages From Modeling With PV Elite Lesson Guide - Part4
Pages From Modeling With PV Elite Lesson Guide - Part4
11. We can see all the conversion factors, which I'm going to worry about later on. You don't have
to worry about it now. Click OK.
12. So, we've saved the file, and we've changed the units to metric units. Now we are ready to
start.
13. Before we start, you have to click the Home tab. After you click the Home tab, you then have
all the icons that we use to build the vessel.
At the moment, we are only going to use the icons on the Elements panel. In fact, we're only
going to use three of them.
4
Copyright© 2016 All Rights Reserved CAD Training Technologies, LLC