Professional Documents
Culture Documents
Bissell Vacuum Manuel
Bissell Vacuum Manuel
2790 SERIES
Warranty
5-Year limited warranty, may vary by state. Visit support.BISSELL.com or call 1-800-237-7691
for complete warranty information.
2 BISSELL.com
We’re so happy you chose the Pet Hair Eraser Turbo Rewind®. We put
this guide together to help you set up, use and maintain your vacuum.
We’ve also included some tips we think will come in handy when you
first start using your vacuum, so let’s get started!
BISSELL.com 3
What’s in the Box?
Standard accessories may vary by model. To identify what should be included with your purchase,
please refer to the “Carton Contents” list located on the carton top flap.
Vacuum Base Upper Handle Stretch Hose LED Lighted Pet 2-in-1 Pet Optional
& Extension Crevice Tool TurboEraser® Brush Febreze Filter
Wand Tool
Certain trademarks used under license from The Procter & Gamble Company or its affiliates.
Product View
For additional support videos and information about your vacuum,
visit support.BISSELL.com.
5
1. Suction Control 4
2. Hose 6
3. Quick Release Extension Wand
4. Dirt Tank Release Button
5. Power Switch 7
6. Brush Roll ON/OFF Switch
7. Pre-Motor Filter
8. Dirt Tank
9. Post-Motor Filter
10. Automatic Cord Rewind Button 8
10
4 BISSELL.com
Assembly
Go to support.BISSELL.com for assembly videos.
1. Slide end of wand into top 2. Attach Stretch Hose by lining 3. Press the Dirt Tank Release
of base. It will “click” when the tabs on the circular cuff Button and pull tank away
inserted correctly. with the notches on the back of from the vacuum to remove.
the handle. Twist clockwise to
lock hose into place.
4. Attach end of hose to 5. Install optional Febreze 6. Place the Dirt Tank on
vacuum by sliding square cuff filter by twisting tank cover the vacuum by securing the
into the bracket below the to unlock position and pulling bottom in place first, then push
Power Switch. up on the handle. Remove the back until you hear a “click”.
Pre-Motor Filter and replace
with Febreze filter. Reinstall
tank cover when done.
Certain trademarks used under license from The Procter & Gamble Company or its affiliates.
BISSELL.com 5
Using Your Vacuum
For additional ways to use your vacuum’s features, check out support.BISSELL.com.
1. Turn the Power Switch ON. 2. Step gently on base and pull 3. Use the Suction Control
the handle back to recline. Switch to change settings
Optional: Turn the Brush between plush and low carpet
Roll Switch ON to run the Note: The Brush Roll for easy multi-surface cleaning.
PowerBrush for carpet automatically shuts OFF when
cleaning. Brush Roll is vacuum is locked in upright
ON when light switch is position. Recline to reactivate.
illuminated. Turn the Brush Roll
Switch OFF when vacuuming
hard or delicate surfaces like
hardwood, tile, small area rugs,
or frieze carpets with long
delicate fibers or threads.
WARNING Do not plug in your vacuum until you are familiar with all instructions and operating procedures.
6 BISSELL.com
Automatic Cord Rewind
If you have trouble with this feature, see our troubleshooting videos on support.BISSELL.com.
1. To plug in your vacuum, 2. When you’re done cleaning, 3. If it doesn’t fully retract at
gently pull the cord out, being unplug the vacuum. Hold the first, pull some of the cord out
careful not to pass the red plug and press the Automatic and press the button again.
mark on the cord. Plug the Cord Rewind Button to slowly
cord into an outlet. retract the cord.
WARNING Hold plug when rewinding onto cord reel. Do not allow plug to whip when rewinding.
BISSELL.com 7
Above-Floor Cleaning
Visit support.BISSELL.com to see all the ways you can use your vacuum’s tools.
1. Clean hard-to-reach 2. The Stretch Hose can be 3. When finished, replace the
spaces with the Quick Release removed from the extension wand back on the vacuum by
Extension Wand. Push the wand. To do so, twist circular sliding into place until you hear
release button to remove and hose cuff counter-clockwise a “click” and reattach hose to
attach desired tool. and remove from handle. handle if needed.
8 BISSELL.com
Emptying the Dirt Tank
For additional maintenance steps, visit support.BISSELL.com.
1. Press the Dirt Tank Release 2. Hold the Dirt Tank over a 3. Return the Dirt Tank to
Button and grab the handle to trash bin and press the Empty the vacuum by securing the
pull the Dirt Tank away from Button. Once emptied, snap bottom in place first and then
vacuum. bottom back into place. pushing back until you hear a
“click”.
1. Hold the Dirt Tank over 2. Twist Cyclone counter- 3. Tap separator against
a trash container. Press the clockwise and pull down to inside of trash container and
bottom release button to remove. rinse under warm water, if
empty. necessary. Be sure to let it dry
completely before placing back
in Dirt Tank.
BISSELL.com 9
Cleaning and Replacing the Filters
Visit BISSELL.com to find replacement filters.
Pre-Motor Filter
1. Press the Dirt Tank Release 2. Twist tank cover to the 3. Remove Pre-Motor Filter
Button and pull away from unlock position then pull up on from top of Dirt Tank lid by
vacuum. handle. pulling out.
24h
4. Clean with mild detergent, 5. Return Pre-Motor Filters 6. Put tank cover back on and
rinse and squeeze all excess to the top of the Dirt Tank, twist to lock.
water. Allow filters to dry placing the thick foam filter
completely before reinserting. in last.
Post-Motor Filter
10 BISSELL.com
Protecting the Vacuum’s Motor
For more assistance with your vacuum’s motor protection, visit support.BISSELL.com.
There is an internal thermal protector in your vacuum that protects it from overheating. It controls
the main vacuum motor only, not the brush motor. When it activates, the main motor will stop.
The front lights and Brush Roll will stay on but there won’t be any suction. If this happens, follow
these steps:
1. Turn vacuum OFF and unplug from electrical outlet.
2. Check for the source of overheating problem (full Dirt Tank, dirty filters or a clog) and fix by
following the steps in the “Vacuum won’t pick up dirt” troubleshooting section.
3. When the motor cools for approximately 30 minutes, the thermal protector automatically resets
and cleaning may continue. If the vacuum will not turn ON or the thermal protector continues to
activate contact Consumer Care.
Troubleshooting
Below are some of the issues you may run into. If you don’t see the issue you’re experiencing
below, visit support.BISSELL.com.
WARNING To reduce the risk of electrical shock, turn Power Switch OFF and disconnect polarized plug from electrical
outlet before performing maintenance or troubleshooting checks.
BISSELL.com 11
We’re Waggin’ Our Tails!
BISSELL® proudly supports BISSELL Pet Foundation® and its mission to help
save homeless pets. When you buy a BISSELL product, you help save pets,
too. We’re proud to design products that help make pet messes, odors and
pet homelessness disappear. Visit BISSELLsavespets.com to learn more.