Professional Documents
Culture Documents
Sat450 Eng
Sat450 Eng
Sat450 Eng
1
I.S.E. MODULE (OPTIONAL) SOFTWARE OVERVIEW
The SAT 450 operating software runs under multitasking
SIMPLICITY, PRODUCTIVITY, WINDOWS XP, VISTA and 7 (32 bit only).
QUALITY RESULTS Its bright graphical user interface simplifies routine work and
· direct measurement
offers the operator a concise guide through the operating
of Sodium, Potassium
and Chloride functions.
· easy access for MONITOR SCREEN (1)
reagent replacement
G real time presentation of samples and reagents status
· maintenance-free electrodes
G dynamic monitoring of test execution
a single, heated level
sensing arm minimizes G analyzer detailed status with error messages, incubation 2
mechanical complexity temperature control, START, STOP, and PAUSE functions
and rapidly moves to all
METHODOLOGY PROGRAMMING (2)
position for:
G
G optimized sample all parameters are completely user programmable
and reagent mixing G up to 999 methods can be memorized
COST EFFICIENCY G all settings are user programmable
G up to 3 different reagents
addition to each method G user selectable pre-dilution and re-dilution ratio
G user selectable samples re-run option
G 80 long life, 6 mm optical path,semi-disposable cuvettes G test calculation models are user selectable: Factor, Stan-
G sample pre-dilution (4 separate racks with 20 cuvettes each) dard, Linear Fit, Point to Point, Quadratic, Cubic, Quartic,
G sample rerun with or without dilution G selective cuvette wash with 3 different
Cubic Inv., Log-Logit, Log-Log Cubic
G probe double washing between each sampling cycle liquids: acid, alkaline and neutral
G inner and outer probe washing after every cycle
3
G low water consumption: 1.5 l/h AUTOMATIC DETECTION OF:
G 200 µl minimum reaction volume G end point limit
G cuvette quality automatic check G substrate depletion
ON BOARD REAGENTS G fixed time and kinetic reaction linearity