Professional Documents
Culture Documents
Alarm Handling Ma268 b1 PDF
Alarm Handling Ma268 b1 PDF
Legal Notices
Copyright Statement This Tellabs manual is owned by Tellabs or its licensors and protected by U.S.
and international copyright laws, conventions, and treaties. Your right to use
this manual is subject to limitations and restrictions imposed by applicable li-
censes and copyright laws. Unauthorized reproduction, modification, distri-
bution, display or other use of this manual may result in criminal and civil
penalties.
Trademark Notice The following trademarks and service marks are owned by Tellabs Opera-
tions, Inc., or its affiliates in the United States and/or other countries: AUDIO
PLUS®, CABLESPAN®, CEC-128™, DYNAMIC SIGNAL TRANSFER™,
DXX®, DXX logo®, EC DUO®, ENHANCED AUDIO PLUS®, EX-
PRESS/PATH®, FOCUS™, MARTIS®, MARTISDXX®, MARTIS logo®, MAR-
TISDXX logo®, METROVANTAGE®, METROWATCH™, NETREACH®,
NETWISE®, SCULPTURED SOUND™, TELLABS®, TELLABS and T sym-
bol®, T symbol, TELLABS PROPARTNER™, TEL/MAP™, TEL/MOR®, THE
WORLD COMMUNICATES THROUGH TELLABS™, TITAN®, VERITY™,
YOUR NETWORKING PARTNER®.
Any other company or product names may be trademarks of their respective
companies.
2 MA268 • Rev. B1
Tellabs® 6300 Network Manager Revision Information
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
Revision Information
B1 Dec. 19, 2005 The following changes have been made from A1:
• All information about handling alarms has been
updated to describe the TeMIP Client V5.1 for
Windows
• The list of alarms has been updated
MA268 • Rev. B1 3
Tellabs® 6300 Network Manager Revision Information
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
4 MA268 • Rev. B1
Tellabs® 6300 Network Manager Contents
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
Legal Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Revision Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
3 Alarm Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
3.1 Alarms View Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
5 Supervising Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
5.1 Setting Up Alarm Handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
5.1.1 Opening the Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
5.1.2 Specifying Alarm Surveillance . . . . . . . . . . . . . . . . . . . . . . . . 45
5.1.3 Setting Up Alarm Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
5.2 Inspecting and Handling Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
5.2.1 An Overview of the Process for Handling Alarms . . . . . . . . . . 51
5.2.2 Acknowledging Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
5.2.3 Locating the Problem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
5.2.4 Attaching a Note . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
5.2.5 Terminating Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
5.2.6 Automatic Clearance and Matching . . . . . . . . . . . . . . . . . . . . 55
5.3 Using the History View to View the Alarm Log . . . . . . . . . . . . . . . . . . . 56
5.3.1 Opening the Alarm Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
5.3.2 Searching in the Alarm Log . . . . . . . . . . . . . . . . . . . . . . . . . . 58
5.3.3 Purging Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
MA268 • Rev. B1 5
Tellabs® 6300 Network Manager Contents
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
9 Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
9.1 Special Operations for Operation Contexts . . . . . . . . . . . . . . . . . . . . 107
9.2 Special Operations for Alarm Rules . . . . . . . . . . . . . . . . . . . . . . . . . . 112
9.3 Special Operations for Alarm Objects . . . . . . . . . . . . . . . . . . . . . . . . 113
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
6 MA268 • Rev. B1
Tellabs® 6300 Network Manager Preface
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
Preface
The purpose of this This documentation provides procedures that explain how to create alarm
documentation rules, filter alarms and interpret the alarm text for alarms triggered by the Tel-
labs 6300 network management system. Although the Tellabs 6300 network
management system activates the alarms, the user interface of the TeMIP Cli-
ent V5.1 for Windows displays the alarms.
For general information about using TeMIP Client V5.1 for Windows, use the
on-line help that is installed with the software. This on-line help is the com-
plete user documentation for the TeMIP Client V5.1 for Windows. Use it to
learn about the TeMIP Client, or to solve configuration or operation problems
while using the software.
Note: We assume that you are familiar with Microsoft Windows. For exam-
ple, you must know how to navigate in a tree structure and how to ac-
tivate pop-up menus.
Product version Use the Main Release Notes for the Tellabs 6300 network manager to make
sure that this documentation is the correct version for your current software
product.
MA268 • Rev. B1 7
Tellabs® 6300 Network Manager Preface
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
Style conventions The following style conventions are used in the text:
• Italic text
Italics text is used in the following situations:
• File, computer and directory names.
• Commands in normal text.
• Text that is to be replaced with a correct term or expression. This text is
normally enclosed in < >.
• Bold text
Bold text is used in the following situations:
• Names of windows displayed on screen
• Names of menu items accessed from the menu bar. (When these are
shown as a command, an arrow separates the menu items.)
• Names of push buttons displayed on screen
• Text typed as an answer to a question displayed on screen
• Monospaced text
Monospaced text is used in the following situations:
• Text to be typed as a command
• Computer dialog issued by software in a command line interface (no
graphical interface used)
• [Text] in square brackets
Text in square brackets is used in the following situations:
• [Monospaced] text in square brackets indicates optional items in
commands
• [Bold] text in square brackets indicates a function key on the keyboard
• {Text} in braces
Text in braces is used in the following situations:
• Choices in commands. These are normally separated by a vertical line
(|).
References [1] MA266, Tellabs® 6300 Managed Transport System, Tellabs® 6300 Net-
work Manager, Working in Tellabs 6300 Manager, Vol.1: Principles of
Operation, User’s Manual
[2] MA267, Tellabs® 6300 Managed Transport System, Tellabs® 6300 Net-
work Manager, Working in Tellabs 6300 Manager, Vol.2: Using the Net-
work Editor, User’s Manual
[3] MA269, Tellabs® 6300 Managed Transport System, Tellabs® 6300 Net-
work Manager, Working in Tellabs 6300 Manager, Vol.4: Using the Entity
Browser, User’s Manual
8 MA268 • Rev. B1
Tellabs® 6300 Network Manager Preface
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
[4] TeMIP Client V5.1 for Windows, On-line help – Alarm Handling
[5] TeMIP Client V5.1 for Windows, On-line help – Alarm History
[6] TeMIP Client V5.1 for Windows, On-line help – TeMIP Desktop
[7] TeMIP Notification FM, Alarm Rules FM and Collection AM User’s
Guide
MA268 • Rev. B1 9
Tellabs® 6300 Network Manager Preface
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
10 MA268 • Rev. B1
Tellabs® 6300 Network Manager Part Overview of Alarm Handling
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
MA268 • Rev. B1 11
Tellabs® 6300 Network Manager Part Overview of Alarm Handling
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
12 MA268 • Rev. B1
Tellabs® 6300 Network Manager 1 Alarm Handling
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
1 Alarm Handling
Overview This chapter introduces the principles in alarm handling and describes how
alarms are indicated in the Tellabs 6300 manager user interface.
Introduction Alarm handling is a function performed partly by Tellabs 6300 manager and
partly by the users of the system. Tellabs 6300 manager collects, presents and
logs alarms from the equipment of the managed network, while the users lo-
cate and analyze the problems (using the system’s functions) and initiate re-
pair actions.
Definition of alarms An alarm is a report on a detected fault or malfunction, either in the network
cables, in the equipment of the managed network, or in Tellabs 6300 manager
itself. For instance, a Tellabs 6340 switch node will send an alarm to Tellabs
6300 manager if it detects a loss of signal on the aggregate channel. Likewise,
Tellabs 6300 manager will generate an alarm if it detects a storage capacity
problem, or a problem in its own communication with the monitored equip-
ment.
Alarm reporting The figure outlines a typical fault example in which a cable rupture has caused
a loss of signal in the Tellabs 6340 switch nodes terminating the cable.
The Tellabs 6340 switch nodes in stations 1 and 2 detect a loss of signal due to
a cable rupture. They both send an alarm to Tellabs 6300 manager, which pre-
sents the alarms to the operator.
MA268 • Rev. B1 13
Tellabs® 6300 Network Manager 1 Alarm Handling
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
Alarm information An alarm contains information on the detected fault. By default, the following
types of information are presented by the Real Time View window:
• Event Time
• Main Object
• Detailed Object
• Alarm Text
• Perceived Severity
• Probable Cause
• Specific Problems
• State
• Operator Note
• Domain
• Identifier
The information is supplied as attributes of the alarm objects, in formats rec-
ommended in OSI standards, and are shown in the alarm windows. The most
important attributes are described in ‘2.2 Attributes for Alarms’ on page 23
Alarm surveillance The alarm handling function, which allows the operator to supervise the
alarms received by Tellabs 6300 manager, can be run either as a stand-alone
system or as an integrated part of Tellabs 6300 manager.
Alarm presentation When an alarm is received by Tellabs 6300 manager, it is presented as one line
in the main alarm window. When no additional filters are used, this is called
the All Alarms - [n] - Real Time View window, where n is the number of active
alarms present.
The operator may also be notified in the map window or the Network Manage-
ment window, when an alarm is received, by a change of color of the icons rep-
resenting the faulty entities. The estimated severity determines the color. This
is called map notification.
Note: Map notification is only available when the alarm windows are open
(that is, when the alarm handling function is activated).
Alarm handling by the An alarm reflects an error condition somewhere in the managed network, or
user in Tellabs 6300 manager. Such a condition requires action by you, the user.
You must handle the alarm. To handle the alarm, select the alarm in the All
Alarms - [n] - Real Time View window and open the pop-up menu. The pop-up
menu makes the following options available:
• Acknowledge – when you select this option, the icon in the State column
changes to indicate that you have acknowledged the alarm.
• Acknowledge... – when you select this option, you are able to provide an
ID, which identifies who acknowledged the alarm.
• UnAcknowledge – this option enables you to return alarms that are already
acknowledged to their previous states.
• UnAcknowledge... – this option enables you to return alarms that are al-
ready acknowledged to their previous states and provide a user ID, which
enables you to identify who made the change.
14 MA268 • Rev. B1
Tellabs® 6300 Network Manager 1 Alarm Handling
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
• Terminate – this option removes the alarm from the list of alarms. Once an
alarm is terminated, it cannot be returned to the list of alarms unless the
alarm is sent again.
• Terminate... – this option removes the alarm from the list of alarms and en-
ables you to provide an ID, which identifies who terminated the alarm.
• UndoTerminate – this option has no function.
• UndoTerminate... – this option has no function.
• Open in Current Management View... – this option opens a new window
that displays all the attributes for the selected type of alarm.
• Open in New Management View...
• Print Preview... – this option enables you to view on screen both the format
of the alarm and the alarm details before they are printed.
• Print – this produces a hard copy of the details for the selected alarm(s).
The details are presented in a table, which provides details about the fol-
lowing attributes:
• Alarm Origin
• State
• Problem Status
• Handled by
• Alarm Report Clearance Received
• Correlated Notifications
• Perceived Severity
• Event Type
• Probable Cause
• Managed Object
• Target Entity
• Additional Text
• Event Time
• Domain
• Operator Note
• Specific Problems
• OC Name
• Identifier
• Original Severity
• Notification Identifier
• Similar Alarms
• Problem Occurrences
• Original Event Time
• User Text
• User Identifier
MA268 • Rev. B1 15
Tellabs® 6300 Network Manager 1 Alarm Handling
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
Alarm responsibility Responsibility for alarm handling can be divided into fields of responsibility,
areas, and shared between several operators of a network management center.
The division of responsibility between operators can be adjusted as required.
Note: An operator assigned to a specific area will normally not receive alarms
from other areas. Only alarms from his own area will normally be visi-
ble.
Note: In Tellabs 6300 manager, the fields of responsibility or areas in connec-
tion with alarms are called operation contexts. An operation context
collects the alarms from a specific domain. See ‘2.1.1 The Operation
Context’ on page 21 for more information about operation contexts.
Alarm rules Figure ‘Alarm reporting’ on page 13 illustrates a situation where the managed
equipment itself can detect and report errors. Some kinds of equipment, how-
ever, do not have this ability, although they have the ability to respond to que-
ries on current status and characteristics.
To monitor such equipment (in the framework of Tellabs 6300 manager, typi-
cally computer hardware and software), special alarm rules are set up. These
rules recurrently ask the equipment for key values. If these key values are
found to be unacceptable compared to predefined standards, an alarm is gen-
erated. See ‘2.1.2 The Alarm Rule’ on page 22 for information about the differ-
ent types of alarm rules.
Alarm clearance Modern transmission equipment has been designed to detect and report both
appearance and disappearance of transmission problems. This means that,
when a problem is encountered, an alarm is sent. And when the problem is
16 MA268 • Rev. B1
Tellabs® 6300 Network Manager 1 Alarm Handling
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
How alarms are When an alarm is generated in an entity, the existence of the alarm is indicated
indicated in the various Tellabs 6300 manager windows where the entity itself or entities
containing that entity are represented. In general, the alarm is indicated by a
display of the color matching the alarm’s severity (see ‘Icon colors’ on page 18
for a description of the alarm colors). When the alarm has been cleared or ter-
minated, the color display disappears. The alarm is indicated in the different
types of windows in the following way:
• In the Real Time View window and History View window, the complete
alarm information line is colored in a color that shows the severity of the
alarm.
• In the Map View window, the border around the relevant icons and/or
boxes blink in the alarm color.
• In the Trail View window the alarm indication field at the bottom of the
window is colored in the same color as the severity of the alarm.
Note: The alarm indication field is not updated dynamically. If an alarm is
cleared while the window is open, it is necessary to refresh the win-
dow manually before the color is removed.
• In the Find Trail window, the trail name is highlighted in the alarm color.
You can locate where the alarm is coming from by double-clicking on an alarm
information line. This opens the attributes window for the operation context
of the selected alarm. Alternatively, you can double- click on an icon indicat-
ing an alarm and thereby display its child entities.
Note: When several alarms exist for the same entity, the color from the alarm
of the highest severity is used.
MA268 • Rev. B1 17
Tellabs® 6300 Network Manager 1 Alarm Handling
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
Icon colors The color of the alarms in the Real Time View window are determined by the
most severe not-handled alarm within the entities the icon represents. The ta-
ble shows the default colors for the different severities.
Severity Color
Critical Red
Major Orange
Minor Yellow
Warning Green
Clear Blue
If you wish to use different colors for the different alarms, then you can
change them in the TeMIP Client window. Select Tools →Options... →General
tab. In the Set Severity Color group box, use the Windows color palette to
change the color settings.
Note: This method does not change the colors of the alarms in the Trail View
and Find Trail windows. Although the alarm colors in these windows
can be changed, we recommend that you use the default color settings.
18 MA268 • Rev. B1
Tellabs® 6300 Network Manager 1 Alarm Handling
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
Examples of alarm The figure shows how the same alarm is indicated in different ways in differ-
indication ent types of windows.
MA268 • Rev. B1 19
Tellabs® 6300 Network Manager 1 Alarm Handling
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
20 MA268 • Rev. B1
Tellabs® 6300 Network Manager 2 Alarm Entities and Attributes
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
Overview This section introduces the entities connected to alarm handling (the opera-
tion context and the alarm rule) and describes the most important attributes
for an alarm.
Although the operation contexts and alarm rules are defined using the
T6300NM Entity Browser, and not the TeMIP Client, it is important that you
know how these entities are connected with the alarm handling.
Overview The following entities must be set up to enable the reception and handling of
alarms:
• ‘2.1.1 The Operation Context’ on page 21
• ‘2.1.2 The Alarm Rule’ on page 22.
Definition An operation context is the supervisor and collector of alarms from the entities
(the physical objects, for example network elements) within a specific domain.
The managed network and the Tellabs 6300 manager representation are divid-
ed into a number of domains that together form a hierarchy, where the top do-
main is at the highest level. The alarm handling function, which receives, han-
dles and logs alarms, is organized in a similar way. Each major domain is as-
signed an operation context, in which all alarms that originate from that do-
main are received, handled and stored.
Note: The assignment of an operation context to a domain is fixed and cannot
easily be changed.
MA268 • Rev. B1 21
Tellabs® 6300 Network Manager 2 Alarm Entities and Attributes
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
An example The figure shows an example of an alarm handling organization, where the
alarm handling function is divided into two distinct operation contexts.
Alarms from domain A are received in the operation context for domain A,
while alarms from domains b1, b2, and b3 are received in the operation con-
text for domain B.
Note: Domains b1, b2, and b3 share a single operation context, for instance be-
cause each of them is too small to comprise a field of responsibility of
appropriate size.
Fields of responsibility An operation context represents a field of responsibility with respect to alarm
handling. Typically, one operator will get the responsibility for one operation
context, while another operator will get the responsibility for another opera-
tion context. The division of the alarm handling function into a number of op-
eration contexts, therefore, reflects the (potential) division of responsibility be-
tween operators of a network management center. The actual division of re-
sponsibility at your management site will determine which operation context
you are responsible for and when.
Note: It is possible for individual operators to adopt responsibility for several
operation contexts. This is, for instance, useful when a reduced number
of operators are working on the night shift at a management center.
Alarm log An alarm log is attached to each operation context. This logs all the alarms re-
ceived in the operation context. The contents of the alarm log can be dis-
played, and you can search for specific groups of alarms.
Definition An alarm rule is used to generate alarms for equipment that cannot generate
alarms by itself.
At regular intervals, an alarm rule checks the value of a specified attribute of,
for instance, a terminal server. If the value is not acceptable, the alarm rule
fires (generates an alarm). Alarm rules can also be used to monitor equipment
22 MA268 • Rev. B1
Tellabs® 6300 Network Manager 2 Alarm Entities and Attributes
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
that is not part of the managed network, such as a thermometer measuring the
temperature in the computer room.
Types of alarm rules The table shows the five types of alarm rules.
expression rule Specify any of the other four alarm rule types in
one expression. To use the expression rule, you
must be thoroughly familiar with the syntax of an
alarm rule expression.
Information from The information contained in the alarm attributes is normally sufficiently de-
attributes tailed for the operator to take appropriate action. However, it is often the com-
bination of information given, more than a single attribute for an alarm, that
gives a hint to what may have caused the problem. Furthermore, it is often the
combination of alarms received, and not the single alarm in itself, that helps
to identify the specific fault. For example, if you receive a LossOfSignal alarm
from both ends of a cable, a cable rupture would seem the most obvious ex-
planation.
The attributes for an alarm provide information about such things as, for ex-
ample, the severity of the alarm, the probable cause of the alarm, and from
which entity in the managed network the alarm has been sent. The values of
the attributes are shown in the alarm windows; but they can also be inspected
for each alarm using Open in Current Management View... option in the pop-up
menu.
This section describes a few of the most important attributes. See ‘6.2 Alarm
Object Attributes’ on page 80 for a description of all alarm attributes. You can
change the number and type of attributes shown, see ‘To change the alarm at-
tributes shown in the Real Time View window’ on page 24.
MA268 • Rev. B1 23
Tellabs® 6300 Network Manager 2 Alarm Entities and Attributes
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
To change the alarm It is possible to change the number and type of attributes shown in the Real
attributes shown in the Time View window and the History View window. To do this:
Real Time View window
Note: To simplify this procedure, only the Real Time View is referred to.
Step Action
1 Open the pop-up menu at the top of the table in the Real Time View or
History View window.
2 Select Customize....
The RT Alarms window or History Alarms window appears.
3 Use the buttons in the window to move the relevant field names and
set the order in which they appear.
For a full description of how to customize the attributes shown, see [4].
Description The Event Time attribute gives the date and time when the alarm was generat-
ed. This information is a time stamp which is supplied by, for instance, the NE
that sent the alarm. It appears in the alarm windows in the Event Time column.
A number of other attributes (see Section 6.2) hold different time stamps at-
tached to the alarm.
24 MA268 • Rev. B1
Tellabs® 6300 Network Manager 2 Alarm Entities and Attributes
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
Description The Perceived Severity attribute indicates the severity level of the alarm. In the
alarm windows, the value of the attribute is shown in the Perceived Severity
column.
The severity levels Tellabs 6300 manager as well as the management equipment distinguish be-
tween different levels of severity. Some errors are estimated to be severe, be-
cause they normally affect the telecommunications traffic seriously, when
they occur. Other errors are perceived to be less severe, because they only
have minor or no direct influence on the traffic. In accordance with interna-
tional standards, six levels of severity exist. The table shows them in increas-
ing order of severity.
Description The Probable Cause attribute describes the error in a standardized form.
Note: Do not try to interpret this in isolation, but combine it with the other at-
tributes, for example Alarm_Text, to get an idea of the problem causing
the alarm.
Description The State attribute describes the stages that the alarm goes through from it
first appears until it is terminated. The alarm state is shown as icons in the Real
Time View window and the History View window.
The state icons The table shows the available alarm state icons.
MA268 • Rev. B1 25
Tellabs® 6300 Network Manager 2 Alarm Entities and Attributes
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
Note: The last icon does not appear in the Real Time View window. The com-
plete line is just removed.
Description The Clearance attribute indicates that the alarm has been cleared because a
matching clearance alarm has been received. The clearance icon is only shown
in the History View window when a clearance has been sent by the equipment
and then received and matched to the alarm. If the alarm cannot be correlated,
or the pseudo alarm function is not selected, then the clearance alarm remains
in the list of alarms.
The clearance report flag The table shows the clearance report flag icon.
icon
Icon Name Description
Description The Pseudo Alarm attribute indicates that the alarm has been cleared and cor-
related. The pseudo alarm icon is only shown in the History View window
when a clearance alarm, that is sent by the equipment, is correlated and the
Pseudo Alarms option is selected in the Options Dialog window. By default, the
pseudo alarm option is selected.
Note: For details about how to change this setting, see [4].
The clearance report flag The table shows the clearance report flag icon.
icon
Icon Name Description
26 MA268 • Rev. B1
Tellabs® 6300 Network Manager 2 Alarm Entities and Attributes
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
Note: The Correlated Notifications attribute is not present in the default list of
attributes in the Real Time View window. For details about how to in-
clude it in the list, see [4].
The correlated notif info The table shows the correlated notif info icon.
icon
Icon Name Description
MA268 • Rev. B1 27
Tellabs® 6300 Network Manager 2 Alarm Entities and Attributes
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
28 MA268 • Rev. B1
Tellabs® 6300 Network Manager 3 Alarm Filters
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
3 Alarm Filters
Overview This section describes the filters that you can be use to control the amount of
alarm information displayed in the Real Time View and History View windows.
For a full description about creating and using the alarm filters, see [4] and [5].
Description You can control the amount of alarm information displayed by setting up the
alarm filters. When you apply a filter to the alarm list in the Real Time View or
History View window, only those alarms that fulfil the requirements of the fil-
ter are displayed.
Note: Alarm filters are a display function only. The collection of alarms is not
affected by the use of alarm filters.
You can save each filter with a unique name. The filter names appear below
the User folder, which is visible in the Filter View. The Filter View is a tree
structure positioned on the left-hand side of the Real Time View and History
View windows. It is from within the Filter View that you control which filters,
if any, are active.
The Filter View From the Filter View, you decide which filter patterns are active or inactive
and you can open the Filter Editor window.
To use the filter patterns, you must select the check-box that is next to the filter
name. It is possible to use one or more filters at the same time.
Note: It depends on what the filter patterns specify that determines how well
the multiple filter patterns work together.
The Filter Editor window The figure shows the Alarm Handling Filter Editor window. You use this win-
dow to set up alarm filtering requirements and create alarm filters. To open
MA268 • Rev. B1 29
Tellabs® 6300 Network Manager 3 Alarm Filters
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
the window, select View →Filter Patterns... while the Real Time View window
is selected.
Note: The filters for the History View window are set in the History Alarms Fil-
ter Editor window. You open this in the same way as described above.
The window is divided into 2 halves, a top half and a bottom half. These have
the following functions:
• Top half of the window: this shows you the names, the operator settings
and the filter patterns for any filters that are already present. If no filters
are present, it is here that you can create new filters. To create filter pat-
terns, see ‘5.1.3 Setting Up Alarm Filters’ on page 49.
• Bottom half of the window: this area enables you to define the patterns for
the filters. It is only possible to use this part of the window after you have
created a new filter in the top part of the window, or added a new item or
sub-filter to an existing filter. Patterns are created by selecting criteria
from the attributes list.
• Buttons: Use the Valid button once you have defined the filter rule to make
sure that the pattern you have defined is allowed. The Apply button is
only available after you have created, or edited, a valid filter pattern. Af-
ter you use this button, all the changes you have made in the Alarms Filter
Editor window are made available in the Real Time View or History View
windows.
Filtering criteria The filter patterns are set up by specifying values for some of the alarm at-
tributes. The following attributes are available:
• Acknowledge User Identifier
• Additional Text
• Alarm Origin
• Alarm Report Clearance Received
• Alarm Type
• Alarm Text
• Correlated Notifications
• Detailed_Object
• Domain
• Escalated Alarm
• Event Time
• Handled By Ticket
30 MA268 • Rev. B1
Tellabs® 6300 Network Manager 3 Alarm Filters
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
• Identifier
• Main_Object
• Managed Object
• Notification Identifier
• OC Name
• Operator Note
• Original Event Time
• Original Severity
• Outage Flag
• Perceived Severity
• Probable Cause
• Problem Occurrences
• Problem Status
• Security Problem Cause
• Similar Alarms
• Specific Problems
• State
• Target Entity
• Termination User Identifier
• User Identifier
• User Text
For a description of the individual alarm attributes and their possible values,
see ‘6.2 Alarm Object Attributes’ on page 80.
Example of a filter Filter patterns are often used to reduce the number of alarms displayed when
pattern you want to search for an individual alarm or type of alarm. In this example,
the filter pattern is used so that only alarms with a severity of critical are dis-
played. The figure shows how the pattern is defined, how it is displayed in the
MA268 • Rev. B1 31
Tellabs® 6300 Network Manager 3 Alarm Filters
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
Filter View and the effect it has on the alarms displayed in the Real Time View
window
32 MA268 • Rev. B1
Tellabs® 6300 Network Manager Part Work Procedures
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
MA268 • Rev. B1 33
Tellabs® 6300 Network Manager Part Work Procedures
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
34 MA268 • Rev. B1
Tellabs® 6300 Network Manager 4 Defining the Alarm Collection
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
Overview The first step in alarm handling is setting up the entities that allow alarm gen-
eration and collection. This section describes how to set up and manage the
operation contexts in order to collect alarms.
Introduction As mentioned in ‘2.1.1 The Operation Context’ on page 21, the total alarm col-
lection for a network can be divided among a number of operation contexts.
Each operation context is assigned to a domain and collects the alarms from
this domain and all its subdomains. Usually, all alarms from these domains
are collected, but the operation context can be defined to collect only alarms
of certain severities.
When you organize the management of a network, different users can be
made responsible for different operation contexts. For instance, different op-
erators may handle alarms in different geographical areas, while the system
manager only handles alarms from the man_env domain.
Operation contexts should be defined so that each domain is covered in one
and only one operation context. This means that special operation contexts
should not be defined for subdomains if the parent domain is already covered
by an operation context.
The existing operation contexts are represented by icons in the man_env do-
main. This is the domain where you create and delete operation contexts.
To create an operation This procedure describes how you define an operation context for a specific
context in a domain domain and register it in the TeMIP database.
Step Action
1 Start the T6300 network management system and log on to the cor-
rect server.
MA268 • Rev. B1 35
Tellabs® 6300 Network Manager 4 Defining the Alarm Collection
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
Step Action
6 Keep the Directive View window open as you need to copy the text in
the Entity field later on in this procedure.
Two entry points to There are 2 main entry points to manage operation contexts. The entry point
manage operation that you use depends on which task you are actually doing at the time. But re-
contexts gardless of the entry point, they both take you to similar user-interfaces. The
entry points are from:
• The T6300 network manager. This entry point takes you to the Directive
View - OPERATION_CONTEXT <oc name> window. This entry point is
commonly used when creating operation contexts for a domain.
• The TeMIP Client. This entry point takes you to the
OPERATION_CONTEXT <oc name> window. This entry point is commonly
36 MA268 • Rev. B1
Tellabs® 6300 Network Manager 4 Defining the Alarm Collection
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
To open the directive This procedure describes how to open the directive view for an operation con-
view from T6300 network text when you open it from the T6300 network manager.
manager
Step Action
1 Start the T6300 network management system and log on to the cor-
rect server.
MA268 • Rev. B1 37
Tellabs® 6300 Network Manager 4 Defining the Alarm Collection
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
Step Action
To open the directive This procedure describes how to open the directive view for an operation con-
view from the TeMIP text when you open it from the TeMIP Client.
Client
Step Action
Note: This is an example of how the TeMIP Client can appear. How it
appears on your system depends on how you saved the workspace.
38 MA268 • Rev. B1
Tellabs® 6300 Network Manager 4 Defining the Alarm Collection
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
Step Action
2 If the Operation Context View window is not open in your TeMIP Cli-
ent window, select Window →OC View.
If the OC View window already contains the desired operation con-
text in the list of operation contexts, go to Step 7.
3 If the desired operation context is not shown in the list in the OC View
window, open the pop-up menu in the OC View window and select
OC List....
The Operation Context List window appears.
4 Make sure that there is a * in the OC Name field, and then click Find.
A list of all the operation contexts for the domain appears in the
Available Operation Contexts field.
5 Select the desired operation context(s) and click Add to add it to the
Alarm Handling Operation Context List field.
6 Click OK. The operations contexts present in the Alarm Handling Op-
eration Context List appear in the OC View window.
7 In the OC View window, open the pop-up window for the desired op-
eration context and select Open in New Management View....
The OPERATION_CONTEXT <oc name> window appears.
MA268 • Rev. B1 39
Tellabs® 6300 Network Manager 4 Defining the Alarm Collection
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
To perform an operation This procedure describes how you perform an operation on an operation con-
on an operation context text in the directive view.
Step Action
1 Open the directive view for the desired operation context. If you do
not know how to do this use one of the methods below:
• ‘To open the directive view from T6300 network manager’ on
page 37
• ‘To open the directive view from the TeMIP Client’ on page 38
Note: If you want to delete an operation context (oc), see ‘To delete an
operation context’ on page 40.
3 Depending on the directive view you are using, do one of the follow-
ing:
• Select Operations →Start, or
• Click the Execute directive button (green arrow).
Operations The specific operations for operations contexts are described in ‘9.1 Special
Operations for Operation Contexts’ on page 107.
To delete an operation This procedure describes how you remove an operation context from the
context man_env domain.
Step Action
1 Select all the alarms for the desired operation context and terminate
them all (see ‘To terminate an alarm’ on page 55).
40 MA268 • Rev. B1
Tellabs® 6300 Network Manager 4 Defining the Alarm Collection
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
Step Action
2 Open the directive view for the desired operation context. If you do
not know how to do this use one of the methods below:
• ‘To open the directive view from T6300 network manager’ on
page 37
• ‘To open the directive view from the TeMIP Client’ on page 38
4 Depending on the directive view you are using, do one of the follow-
ing:
• Select Operations →Start, or
• Click the Execute directive button (green arrow).
6 Depending on the directive view you are using, do one of the follow-
ing:
• Select Operations →Start, or
• Click the Execute directive button (green arrow).
8 Depending on the directive view you are using, do one of the follow-
ing:
• Select Operations →Start, or
• Click the Execute directive button (green arrow).
MA268 • Rev. B1 41
Tellabs® 6300 Network Manager 4 Defining the Alarm Collection
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
Step Action
10 Depending on the directive view you are using, do one of the follow-
ing:
• Select Operations →Start, or
• Click the Execute directive button (green arrow).
The selected operation context is now removed from operation con-
text list.
To accumulate similar This procedure describes how to change the settings for an operation context
alarms so that similar alarms are shown once only.
Step Action
1 Open the directive view for the desired operation context. If you do
not know how to do this use one of the methods below:
• ‘To open the directive view from T6300 network manager’ on
page 37.
• ‘To open the directive view from the TeMIP Client’ on page 38.
6 Depending on the directive view you are using, do one of the follow-
ing:
• Select Operations →Start, or
• Click the Execute directive button (green arrow).
The changes are now active in Real Time View window in the TeMIP
Client.
42 MA268 • Rev. B1
Tellabs® 6300 Network Manager 5 Supervising Alarms
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
5 Supervising Alarms
Overview This section contains the work procedures for starting alarm collection and for
inspecting and handling the received alarms. This is described in the follow-
ing sections:
Note: If you require full details about the TeMIP Client window, and/or the as-
sociated windows it contains, see [4].
• ‘5.1 Setting Up Alarm Handling’ on page 43
• ‘5.2 Inspecting and Handling Alarms’ on page 51
• ‘5.3 Using the History View to View the Alarm Log’ on page 56
Overview This section describes how to prepare for alarm surveillance and inspection.
The TeMIP Client The main window for the alarm handling function of Tellabs 6300 manager is
window the TeMIP Client window. It is from this window that you manage alarms and
get access to other windows for administration of the operation contexts (for
example, the OPERATION_CONTEXT <oc object name> window. This is also
known as the directive view, see page 45). You are also able to retrieve alarm
information from the alarm log (the History View window, see page 56). The
figure shows the contents of the Real Time View window.
MA268 • Rev. B1 43
Tellabs® 6300 Network Manager 5 Supervising Alarms
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
• The operation context view (OC View). This shows a list of operation con-
texts. These can be either enabled or disabled.You enable and disable OCs
with the pop-up menu of each OC. Only when an OC is enabled can the
alarms appear in the Real Time View window.
• The filter area contains information about the currently used filters and
buttons for creating and selecting filters. Below the alarm information list
there are 2 alarm counters. These counters change when the filter settings
made in the filter area are enabled.
• The Console view provides you with information about what is happen-
ing in the windows open in the TeMIP Client.
• The alarm information list contains information about the alarms that are
not yet terminated. The information is organized in columns, where each
column represents either an alarm attribute or a user-defined field. The
number of columns, their contents and sequence are determined by you.
Below the list of alarms are 2 alarm counters and an alarm counter reset
button. The counter on the left shows the total number of alarms currently
displayed in the alarm information area. The counter on the right shows
the number of new alarms added to the window since you used the alarm
counter reset button. A pop-up menu is available for each alarm in the
alarm information list. This pop-up menu gives you access to the a direc-
tive view, which shows all the values for the attributes associated with the
selected alarm.
To open the Real Time This procedure describes how you open the Real Time View window, which
View window gives you a list of active alarms.
Step Action
44 MA268 • Rev. B1
Tellabs® 6300 Network Manager 5 Supervising Alarms
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
Introduction Setting up alarm surveillance means including the relevant operation contexts
in the Operation Context View window. To include or remove operation con-
texts from the Operation Context View window, it is necessary to use the Oper-
ation Context List window.
The Operation Context The figure shows an example of the Operation Context View window. Within
View window this window, you are able to enable or disable the operation contexts. Only
when an operation context is enabled are you able to view the associated
alarms in the Real Time View window.
Icons in the Operation The OC View contains a number of symbols, or icons. Some of the more com-
Context View window mon ones are described below. For a complete list of symbols and explana-
tions see [4].
Unlocked
Shutting Down
Unknown
Off
On
MA268 • Rev. B1 45
Tellabs® 6300 Network Manager 5 Supervising Alarms
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
Degraded
To open the Operation This procedure describes how you open the Operation Context List window.
Context List window
Step Action
1 In the OC View window, open the pop-up menu and select OC List....
The Operation Context List window appears.
Note: If you have not used the OC list window, then the fields in the
window are empty.
2 To show all the operation contexts available for the domain, make
sure that there is a * in the OC Name field, and then click Find.
A list of all the operation contexts for the domain appears in the
Available Operation Contexts field.
To add an operation This procedure describes how you include an operation context in the list in
context to the list in the the Operation Context View window.
OC View
Step Action
1 In the OC View window, open the pop-up menu and select OC List....
The Operation Context List window appears.
Note: If no operation contexts appear, see ‘To open the Operation
Context List window’ on page 46 and display all the operation con-
texts.
46 MA268 • Rev. B1
Tellabs® 6300 Network Manager 5 Supervising Alarms
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
Step Action
3 Click OK.
The OC List window closes and the operations contexts present in the
Alarm Handling Operation Context List appear in the OC View win-
dow.
Note: The operation contexts are disabled. While they have this state,
no alarms appear in the Real Time View window.
To remove an operation This procedure describes how you remove an operation context from the list
context from the list in in the Operation Context View window.
the OC View
Step Action
1 In the OC View window, open the pop-up menu and select OC List....
The Operation Context List window appears.
Note: If no operation contexts appear, see ‘To open the Operation
Context List window’ on page 46 and display all the operation con-
texts.
MA268 • Rev. B1 47
Tellabs® 6300 Network Manager 5 Supervising Alarms
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
Step Action
3 Click OK.
The OC List window closes and the operations contexts removed
from the Alarm Handling Operation Context List do not appear in the
OC View window.
To enable alarm display This procedure describes how you enable the display of alarms from a specific
operation context.
Step Action
1 If the operation context has not already been included in the alarm
handling, follow the procedure described in ‘To add an operation
context to the list in the OC View’ on page 46.
2 In the Operation Context View window, open the pop-up menu for
the desired operation context and select Enable.
All the alarms for the operation context appear in the Real Time View
window.
To disable alarm display This procedure describes how you disable the display of alarms from a specif-
ic operation context.
Step Action
1 If the operation context has not already been included in the alarm
handling, follow the procedure described in ‘To add an operation
context to the list in the OC View’ on page 46.
2 In the Operation Context View window, open the pop-up menu for
the desired operation context and select Disable.
All the alarms for the operation context in the Real Time View win-
dow are removed.
48 MA268 • Rev. B1
Tellabs® 6300 Network Manager 5 Supervising Alarms
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
To define and apply a This procedure describes briefly how you define a pattern for an alarm filter.
filter pattern Alarm filters are a display function only. They determine what is shown in the
alarm view windows, but they do not affect the collection of alarms. For a full
description of how to create, edit and enable alarm filters, see [4].
Note: Some of the criterion fields support regular expressions (string or entity
data types).
Step Action
1 In the alarm filter area of the Real Time View window or History View
window, open the pop-up menu and select New Pattern.
The Filter Editor window appears.
2 In the Filter Editor window, provide a name for the filter. (If the edi-
tor is not active, open the pop-up menu for the filter name and select
rename.)
Note: It is recommended that the name provides an indication to the
function of the filter.
3 When you have given a new name, click outside of the editor field to
keep the name.
4 Open the pop-up menu for the filter name you just gave and select
Add Item.
A list of possible attributes appears in the Attributes field.
5 Scroll through the list of attributes and select the correct attribute.
When an attribute is selected, one of the following appears:
• A list of possible operators appears in the Operator(s) field. If this
is the case, go to Step 6.
• A text field appears. If this is the case, go to Step 7.
MA268 • Rev. B1 49
Tellabs® 6300 Network Manager 5 Supervising Alarms
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
Step Action
To inspect a filter pattern This procedure describes how you inspect the criteria of an existing filter pat-
tern.
Step Action
1 In the Real Time View window or the History View window, expand
the tree structure in the alarm filter area.
2 Select the desired filter from the list and expand the tree structure for
this filter.
The filter pattern’s criteria are displayed.
Note: If a pattern has more than one value, then the values are listed
below each other and separated with an OR.
To delete a filter This procedure describes how you delete an existing filter.
Step Action
1 In the Real Time View window or the History View window, expand
the tree structure in the alarm filter area.
2 Open the pop-up menu for the desired filter and select Delete Pattern.
The filter name is removed from the list.
To select the use of a This procedure describes how you select a filter pattern that you want to use.
filter
Step Action
1 In the Real Time View window or the History View window, expand
the tree structure for the user-defined filter patterns in the alarm fil-
ter area.
50 MA268 • Rev. B1
Tellabs® 6300 Network Manager 5 Supervising Alarms
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
Step Action
To deselect the use of a This procedure describes how you clear the use of any filter whatsoever. That
filter is, how you display all not-closed alarms again.
Step Action
1 In the Real Time View window or the History View window, expand
the tree structure for the user-defined filter patterns in the alarm fil-
ter area.
Introduction From the time an alarm is initially introduced in Tellabs 6300 manager until it
is placed in the archives of the network management center, it passes through
a number of stages. This section describes these stages and the procedures at-
tached to them.
The course of an alarm The table describes the stages that an alarm passes through from it is received
till it is archived.
Stage Description
When an alarm appears for the first time in the Alarm Handling win-
dow, its state will be Outstanding and its problem status will be Not-
Handled (that is, nobody has yet recognized or acted upon the
alarm). The alarm will remain Outstanding until it is acknowledged,
and it will remain Not-Handled.
MA268 • Rev. B1 51
Tellabs® 6300 Network Manager 5 Supervising Alarms
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
Stage Description
The following hints may ease the process of locating and handling
the problem (see Section 5.2.3 for a description of the procedures):
• You can use a filter to limit the number of alarms currently
shown.
• You can look at all the attributes that have been set for the alarm.
• Tellabs 6300 manager can automatically find the entity causing
the alarm in the map window.
• You can look at the attributes of the equipment causing the
alarm.
When the problem of the alarm has been solved, the alarm must be
terminated. Normally, alarms are terminated automatically by the
system. But in some cases — for instance, if the problem causing an
alarm is a lasting one — it may be a good idea or even necessary to
terminate an alarm manually. See Section 5.2.5 for a description of
the procedure.
Note: When an alarm is terminated, it will be removed from the Real
Time View window. However, the alarm is not removed from Tellabs
6300 manager. It remains in the alarm log. From here it can be re-
trieved and inspected later (see ‘5.3 Using the History View to View
the Alarm Log’ on page 56).
52 MA268 • Rev. B1
Tellabs® 6300 Network Manager 5 Supervising Alarms
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
Stage Description
From the alarm log, alarms can be retrieved for inspection days or
weeks after their occurrence. However, as new alarms are continu-
ously added to the alarm log, it is necessary once in a while to trans-
fer old alarms to other archives, to keep the size of the alarm log
manageable.
To acknowledge an This procedure describes how you acknowledge an alarm, to indicate that you
alarm will take action to get the underlying problem solved.
Step Action
1 In the Real Time View window, open the pop-up menu for the desired
alarm, or alarms, and select Acknowledge.
The state changes from outstanding to acknowledged.
For details about the state attributes and icons, see ‘2.2.7 The State Attribute’
on page 25.
To limit the number of This procedure describes how you concentrate on only some alarms. For in-
alarms currently shown stance, alarms from one operation context or one NE and/or alarms with a
minimum level of severity.
Step Action
1 Create and use filters in the Real Time View window. See
‘5.1.3 Setting Up Alarm Filters’ on page 49.
To display all attributes This procedure describes how you show all attributes that have been set for a
for an alarm specific alarm.
MA268 • Rev. B1 53
Tellabs® 6300 Network Manager 5 Supervising Alarms
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
Note: The alarm information list in the Real Time View window only shows a
limited number of attributes of an alarm.
Step Action
1 In the Real Time View window, open the pop-up menu for the desired
alarm, or alarms, and select Open in New Management View....
The OPERATION_CONTEXT <oc name alarm_object n> window ap-
pears.
Note: There are multiple tabs available in this window. For full de-
tails about this window and the tabs in this window, see [6].
To manage the entity This procedure describes how you perform management operations directly
that caused the alarm on the entity causing a specific alarm.
Step Action
1 In the Real Time View window, open the pop-up menu for the desired
alarm, or alarms, and select Directives →Show.
A directive window specifically for the selected alarms appears.
To create an operator This procedure describes how you attach an operator note to an alarm.
note
Step Action
1 In the Real Time View window, open the pop-up menu for the desired
alarm, or alarms, and select Set Operator Note.
The Set Operator Note window appears.
2 Type in the text you want to attach to the alarm and click OK.
The text is added to the Alarm Object Operator Node attribute for the
alarm. You can view this in the alarm directive view window, see
‘To display all attributes for an alarm’ on page 53.
54 MA268 • Rev. B1
Tellabs® 6300 Network Manager 5 Supervising Alarms
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
To terminate an alarm This procedure describes how you terminate an alarm manually to indicate
that the problem has been solved.
Step Action
1 In the Real Time View window or the History View window, open the
pop-up menu for the desired alarm, or alarms, and select Terminate.
Note: Both Acknowledged alarms and Outstanding alarms can be ter-
minated.
In the Real Time View window, the alarm is removed from the list of
alarms. In the History View window the attribute icons change, see
‘Attribute icon changes’ on page 55.
Attribute icon changes When an alarm is terminated in the History View window, the attribute icons
change. This is illustrated in the diagram below.
Attribute icon changes When an alarm is matched to an alarm clearance, the alarm’s Acknowledged
state changes to Terminated, and the Clearance Report Flag is set.
Note: When the alarm is terminated, it is removed from the alarm list in the
Real Time View window.
Pseudo-alarm When an alarm clearance has been matched to an existing alarm and has ter-
minated it, a pseudo-alarm with information about the clearance is displayed
MA268 • Rev. B1 55
Tellabs® 6300 Network Manager 5 Supervising Alarms
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
in the Real Time View window. The pseudo-alarm is indicated by the icon
shown in the figure.
The History View window An alarm is stored in an alarm log at the very moment it is received by Tellabs
6300 manager. There is one alarm log for each operation context, and the
alarm log is always accessed via its operation context.
You can inspect and handle the contents of an alarm log in the History View
window, which can be opened in the TeMIP Client window. The figure shows
an example of the History View window, which is used for displaying informa-
tion on the alarms of an operation context present in the alarm log.
56 MA268 • Rev. B1
Tellabs® 6300 Network Manager 5 Supervising Alarms
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
To open the History View This procedure describes how you open the alarm log in the TeMIP Client win-
window dow.
Step Action
2 If this is the first time that you open the History View window, or you
have not selected an operation context previously, you must select
one now. Use these steps to do this:
a) In the TeMIP Client window, select File →OC List →OC List (His-
tory).... The Operation Context List window appears.
b) Click Find to display all the operation contexts for the domain.
c) Select the desired operation contexts in the Available Operation
Contexts field and click Add.
d) Click OK. The OC List window closes and the selected operation
contexts appear in the On Operation Contexts field at the bottom
of the History View window.
3 Click the Start alarm display button. The alarm information list fills
with all the alarms present in the alarm log for the selected operation
contexts.
MA268 • Rev. B1 57
Tellabs® 6300 Network Manager 5 Supervising Alarms
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
Introduction You retrieve alarms from the alarm log in the History View window. To make
it easier to find individual alarms, you are able to create the search patterns
that enable you to reduce the number of alarms in the list and find the alarm
you are interested in. For instance, you can set up a filter pattern to retrieve all
alarms originating from a specific NE and with a specific probable cause and
a specific alarm type.
For full details about using the search function in the History View window,
see [5].
To define a search This procedure describes how you define a search pattern.
pattern
Step Action
1 In the History View window, open the pop-up menu in the Search
Pattern tab and select New Pattern.
The Create a New Search Filter window appears.
3 Click OK.
The History Alarm Handling Search Pattern window appears.
5 Select the correct values in the Attribute Name, Condition and Values
fields.
58 MA268 • Rev. B1
Tellabs® 6300 Network Manager 5 Supervising Alarms
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
Step Action
7 When all the required attributes are defined in the Filter group box,
click OK.
The History Alarm Handling Search Pattern window closes and search
pattern name appears in the Search Pattern tab. These search pat-
terns are now available in all History View windows.
To change a search This procedure describes how you change the attributes of a search pattern.
pattern
Note: The search pattern name remains the same.
Step Action
1 In the Search Pattern tab of the History View window, open the pop-
up menu for the search pattern you want to change and select Prop-
erties.
The History Alarm Handling Search Pattern window appears.
2 Select the row of attributes you wish to change or click Insert Row if
you want additional attributes included.
3 When all the required attributes are defined in the Filter group box,
click OK.
The History Alarm Handling Search Pattern window closes. The
changed search pattern is now available in all History View windows.
MA268 • Rev. B1 59
Tellabs® 6300 Network Manager 5 Supervising Alarms
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
To apply a new search This procedure describes how you apply a new search pattern.
pattern
Step Action
1 In the Search Pattern tab of the History View window, open the pop-
up menu for the search pattern you want to use and select Apply Pat-
tern.
To apply a new search This procedure describes how you apply a search pattern to a list of alarms in
pattern in a new window a new window. This enables you to keep the original list alarms open in an-
other History View window.
Step Action
1 In the Search Pattern tab of the History View window, open the pop-
up menu for the search pattern you want to use and select Apply Pat-
tern In New.
A new History View window appears. The selected search pattern at-
tributes are already applied to the list of alarms that appears.
To delete a search This procedure describes how you delete an existing search pattern.
pattern
Step Action
1 In the Search Pattern tab of the History View window, open the pop-
up menu for the search pattern you want to delete and select Delete
Pattern.
The search pattern name is removed from the Search Pattern tab.
Introduction When alarms are not purged automatically from the alarm log during the ar-
chiving process (see the Purge parameter in the operation ‘Archive’ on page
110), they can be purged with a specific operation.
60 MA268 • Rev. B1
Tellabs® 6300 Network Manager 5 Supervising Alarms
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
Step Action
1 Open the directive view for the desired operation context. If you do
not know how to do this use one of the methods below:
• ‘To open the directive view from T6300 network manager’ on
page 37
• ‘To open the directive view from the TeMIP Client’ on page 38
3 Depending on the directive view you are using, do one of the follow-
ing:
• Select Operations →Start, or
• Click the Execute directive button (green arrow).
5 Depending on the directive view you are using, do one of the follow-
ing:
• Select Operations →Start, or
• Click the Execute directive button (green arrow).
All the alarms for this OC are purged.
MA268 • Rev. B1 61
Tellabs® 6300 Network Manager 5 Supervising Alarms
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
Step Action
7 Depending on the directive view you are using, do one of the follow-
ing:
• Select Operations →Start, or
• Click the Execute directive button (green arrow).
See the description of the operation and its parameters in
‘Purge_alarms’ on page 108.
62 MA268 • Rev. B1
Tellabs® 6300 Network Manager Part Reference Information
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
MA268 • Rev. B1 63
Tellabs® 6300 Network Manager Part Reference Information
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
64 MA268 • Rev. B1
Tellabs® 6300 Network Manager 6 Operation Context and Alarm Attributes
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
Overview This chapter describes the attributes for the operation context entity and its
child entities (alarm objects and similar alarms). The operation context entity
is used to collect alarms within a specific domain, as described in ‘2.1.1 The
Operation Context’ on page 21.
Introduction The following attribute types are available for operation contexts:
• ‘6.1.1 Attributes for Registration of Operation Contexts’ on page 65
• ‘6.1.2 Identifiers Attributes for Operation Contexts’ on page 71
• ‘6.1.3 Characteristics Attributes for Operation Contexts’ on page 71
• ‘6.1.4 Status Attributes for Operation Contexts’ on page 75
• ‘6.1.5 Counters Attributes for Operation Contexts’ on page 80
• ‘6.1.6 Routing Attributes for Operation Contexts’ on page 80
OPERATION_CONTEXT
Allows you to enter a name for the operation context. This attribute is manda-
tory.
Rules for entity names The following rules apply to entity names:
• The name must be unique among all global entities.
• The maximum length of an entity name is 511 characters.
• The following characters are allowed:
• !$-_0123456789
• abcdefghijklmnopqrstuvwxyz
• ABCDEFGHIJKLMNOPQRSTUVWXYZ
• If Tellabs 6300 manager is configured to support special national charac-
ters, an extended set of characters can be used, for instance special Scandi-
navian characters such as æ, ø and å.
• If the entity name is enclosed in quotation marks (“ “), an extended set of
characters can be used, for instance spaces, if you want to break the name
into multiple words. The following characters can be used:
• #%&’()*+,./:;<=>?@[\]^{|}~
Associated Domain
Determines which management domain is to be associated with the operation
context. Specify the full name. This attribute is mandatory.
MA268 • Rev. B1 65
Tellabs® 6300 Network Manager 6 Operation Context and Alarm Attributes
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
Automatic Acknowledge
Determines the severity level of the alarms that are created as acknowledged
instead of as outstanding. Alarms with severity levels less than or equal to this
value are automatically created as acknowledged.
Value Description
66 MA268 • Rev. B1
Tellabs® 6300 Network Manager 6 Operation Context and Alarm Attributes
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
Value Description
Note: In all predefined operation contexts this attribute was set to True. For
trail alarms, this attribute must be set to True.
Value Description
MA268 • Rev. B1 67
Tellabs® 6300 Network Manager 6 Operation Context and Alarm Attributes
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
The severity of the generated alarms is determined by the value of the corre-
sponding thresholds as follows:
Value Description
Discriminator Construct
Defines an alarm filter. Refer to [8] for further information.
Implementation Desc
Allows you to specify an implementation description.
Value Description
Location
Allows you to specify the address of the center responsible for the operation
context.
MAIL Account
Allows you to specify the mail address for the responsible person or center.
Managing Director
Specifies the director in charge of the operation context entity. This attribute
is mandatory.
Name
Allows you to specify a descriptive name for the operation context icon.
A nick name can be defined during registration of an entity. If you define a
nick name, this name appears below the entity icon in the map window in-
stead of the entity name. This is useful if your network plan uses abbreviated
names and you want to show more descriptive names in the map window. For
example, if the entity name is defined as oc_sys_man, you may want to show
System Management instead.
68 MA268 • Rev. B1
Tellabs® 6300 Network Manager 6 Operation Context and Alarm Attributes
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
Note: The nick name is not an attribute. It is associated with the entity icon in
the map window in which the entity was created. If the entity is regis-
tered in two domains, it may have different nick names in the two map
windows. Therefore, you cannot show or set the nick name using the
Show and Set operations. If you need to change the nick name after reg-
istration, use the Change Entity Attributes... item in the pop-up menu.
Phone Number
Allows you to specify the telephone number of the responsible person or cen-
ter.
Reduction Mode
Defines whether incoming alarms concerning the same problem are accumu-
lated as similar alarms or not.
Value Description
Remarks
Allows you to enter a note (maximum 80 characters) to describe the operation
context.
Repository Location
Specifies the directory pathname of the alarm log. The default value is /var/
kits/temip.
Note: Do not change this attribute from its default setting. If you do, no back-
up will be performed.
Responsible Person
Allows you to specify the name of the person responsible for the operation
context. This person should be contacted before changes relating to the oper-
ation context are made.
MA268 • Rev. B1 69
Tellabs® 6300 Network Manager 6 Operation Context and Alarm Attributes
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
Scheduling Package
Defines specific periods of alarm collection activity. Refer to [8] for further in-
formation.
Value Description
Similarity Mode
Defines the criterion that is used during automatic alarm accumulation to de-
cide whether alarms are similar (see ‘Reduction Mode’ on page 69).
Value Description
Termination Policy
Determines how alarms are terminated automatically.
Value Description
Text File
Allows you to specify the full path of a text file with additional information.
Example: /usr/6300/op_con2/description
70 MA268 • Rev. B1
Tellabs® 6300 Network Manager 6 Operation Context and Alarm Attributes
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
Name
Shows the name of the operation context assigned at registration. You cannot
set this attribute.
Value Description
Associated Domain
Shows the name of the domain associated with the operation context (see ‘As-
sociated Domain’ on page 65). You cannot set this attribute.
Automatic Acknowledge
Determines the severity level of the alarms that are created as acknowledged
instead of as outstanding (see ‘Automatic Acknowledge’ on page 66). Alarms
with severity levels less than or equal to this value are automatically created
as acknowledged.
MA268 • Rev. B1 71
Tellabs® 6300 Network Manager 6 Operation Context and Alarm Attributes
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
Discriminator Construct
Defines an alarm filter. Refer to [8] for further information.
LogFullAction
Determines the behavior of the alarm log when its maximum capacity is
reached (see ‘Max Log Size’ on page 72). You cannot set this attribute.
Value Description
Owner Id
Shows the user ID of the user who created the operation context. You cannot
set this attribute.
72 MA268 • Rev. B1
Tellabs® 6300 Network Manager 6 Operation Context and Alarm Attributes
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
Ownership Control
Specifies the policy for controlling the alarm life-cycle management.
Value Description
Outage Policy
Determines the behavior of OutOfService alarms when they are received.
Value Description
Reduction Mode
Defines whether incoming alarms concerning the same problem are accumu-
lated as similar alarms or not.
Value Description
Reduction Scope
Specifies the scope of the similarity algorithm. This algorithm is applied to
only alarm objects that have the state matching the Reduction Scope.
Value Description
MA268 • Rev. B1 73
Tellabs® 6300 Network Manager 6 Operation Context and Alarm Attributes
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
Repository Location
Shows the directory pathname of the alarm log (see ‘Repository Location’ on
page 69). You cannot set this attribute.
Responsible Operators
May hold the user IDs of the operators responsible for monitoring the opera-
tion context.
Scheduling Package
Defines specific periods of alarm collection activity. Refer to [8] for further in-
formation.
Value Description
Similarity Mode
Defines the criterion that is used during automatic alarm accumulation to de-
cide whether alarms are similar (see ‘Reduction Mode’ on page 73).
Value Description
Termination Policy
Specifies the criteria for automatic termination of the Alarm Object.
Value Description
74 MA268 • Rev. B1
Tellabs® 6300 Network Manager 6 Operation Context and Alarm Attributes
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
Value Description
Description You cannot set the Status attributes for operation contexts.
Administrative State
Shows whether alarm collection is suspended. Initially, this attribute has the
same value as Initial Administrative State (see ‘Initial Administrative State’ on
page 68). Later it is set to Locked if the Suspend operation is carried out, and
to Unlocked if the Resume operation is carried out (see ‘9.1 Special Operations
for Operation Contexts’ on page 107).
Value Description
Note: Alarms are only collected when Administrative State is set to Unlocked,
and Operational State is set to Enabled (see ‘Operational State’ on page
78).
Archive AO Age
Shows the value of the AO Age parameter (see ‘Archive’ on page 110).
Archive AO Severity
Shows the value of the Severity parameter (see ‘Archive’ on page 110).
MA268 • Rev. B1 75
Tellabs® 6300 Network Manager 6 Operation Context and Alarm Attributes
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
Archive Interval
Shows the value of the Interval parameter (see ‘Archive’ on page 110).
Archiving Status
Shows whether an automatic Archive operation is running in the background
(see ‘Archive’ on page 110).
Value Description
76 MA268 • Rev. B1
Tellabs® 6300 Network Manager 6 Operation Context and Alarm Attributes
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
Availability Status
Elaborates on the operational state of the operation context (see ‘Operational
State’ on page 78).
Description of
Value Availability Sta- Description
tus
Composite State
The value of this attribute reflects the health of the Operation Context (OC) in-
stance in terms of service availability. This attribute reflects a combination of
the Operation State and the Administrations State (see ‘Administrative State’
on page 75).
Value Description
MA268 • Rev. B1 77
Tellabs® 6300 Network Manager 6 Operation Context and Alarm Attributes
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
Value Description
Creation Timestamp
Shows when the operation context was created.
Monitored By
Shows a list of IDs of the users who have opened the operation context.
Operational State
Shows whether the operation context is working. The operational state is de-
termined by internal conditions within Tellabs 6300 manager.
Value Description
Note: Alarms are only collected when Operational State is set to Enabled, and
Administrative State is set to Unlocked (see ‘Administrative State’ on
page 75).
Purge AO Age
Shows the value of the AO Age parameter (see ‘Purge_alarms’ on page 108).
Purge AO Severity
Shows the value of the Severity parameter (see ‘Purge_alarms’ on page 108).
Purge AO State
Shows the value of the State parameter (see ‘Purge_alarms’ on page 108).
78 MA268 • Rev. B1
Tellabs® 6300 Network Manager 6 Operation Context and Alarm Attributes
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
Purge Interval
Shows the value of the Interval parameter (see ‘Purge_alarms’ on page 108).
Purge Status
Shows whether an automatic Purge_alarms operation is running in the back-
ground (see ‘Purge_alarms’ on page 108).
Value Description
Resumed By User
Shows the ID of the user who carried out the last Resume operation (see ‘Re-
sume’ on page 108).
Suspended By User
Shows the ID of the user who carried out the last Suspend operation (see ‘Sus-
pend’ on page 108).
MA268 • Rev. B1 79
Tellabs® 6300 Network Manager 6 Operation Context and Alarm Attributes
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
Description The Counters attributes for operation contexts describe the current contents of
the alarm log for the operation context in question. Counters are updated
when an alarm is received and when you (or Tellabs 6300 manager) perform
Acknowledge, Terminate, Archive, and Purge_alarms operations (see
‘9.1 Special Operations for Operation Contexts’ on page 107).
You cannot set the Counters attributes of operation contexts.
AO Acknowledged
Shows the number of alarms that have been acknowledged, but not terminat-
ed.
AO Archived
Shows the number of alarms that have been archived, but not purged.
AO Closed
Shows the sum of alarms that have been terminated and archived.
AO Handled
Shows the number of terminated alarms.
AO Not Handled
Shows the number of alarms that have not yet been terminated.
AO Outstanding
Shows the number of alarms that have not yet been acknowledged.
AO Terminated
Shows the number of terminated alarms.
AO Total
Shows the number of alarms found in the alarm log.
Managing Director
Identifies the server that is responsible for the operation context entity. You
cannot set this attribute.
Introduction The following attribute types are available for alarm objects:
• ‘6.2.1 Identifiers Attributes for Alarm Objects’ on page 81
• ‘6.2.2 Characteristics Attributes for Alarm Objects’ on page 81
• ‘6.2.3 Status Attributes for Alarm Objects’ on page 86
80 MA268 • Rev. B1
Tellabs® 6300 Network Manager 6 Operation Context and Alarm Attributes
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
Identifier
Shows the number of the alarm, assigned sequentially within the operation
context. You cannot set this attribute.
Additional Information
Not used.
Additional Text
Shows a text produced by the alarm generator, for instance an NE, to describe
the alarm. You cannot set this attribute.
Alarm Class
Shows whether the alarm is an alarm object or a similar alarm.
Value
AlarmObject
SimilarAlarm
Alarm Origin
Not used.
Alarm Type
Shows the OSI and ITU-T type of the alarm. Example: An NE will generate an
alarm of the CommunicationsAlarm type if transmission problems are detect-
ed, and an alarm of the EquipmentAlarm type if a fault in the transmission
equipment is detected. You cannot set this attribute.
Value
CommunicationsAlarm
EnvironmentalAlarm
EquipmentAlarm
IntegrityViolation
OperationalViolation
MA268 • Rev. B1 81
Tellabs® 6300 Network Manager 6 Operation Context and Alarm Attributes
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
Value
PhysicalViolation
ProcessingErrorAlarm
QualityofServiceAlarm
SecurityServiceOrMechanismViolation
TimeDomainViolation
Backed Up Status
Shows whether the entity from which the alarm originated is backed up by an-
other entity. You cannot set this attribute.
Backup Object
Shows the entity that backs up the entity from which the alarm originated.
You cannot set this attribute.
Domain
Shows the domain in which the alarm originated, that is the domain contain-
ing the equipment or the alarm rule that generated the alarm. You cannot set
this attribute.
Value Description
Event Time
Shows when the alarm was generated, that is the time stamp supplied by the
equipment or by the alarm rule. You cannot set this attribute.
Note: This attribute is updated each time a new similar alarm occurs. The time
of the original alarm is kept in ‘Original Event Time’ on page 83.
82 MA268 • Rev. B1
Tellabs® 6300 Network Manager 6 Operation Context and Alarm Attributes
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
Logical_Operator_And
An operator that forms part of a boolean expression. The default value is and.
You cannot set this attribute.
Managed Object
Shows the name of the entity from which the alarm originated. This is the en-
tity that is affected by the alarm and that changes color in the map window.
You cannot set this attribute.
Monitored Attributes
Not used.
Notification Identifier
Shows a number which identifies the alarm for future matching with a clear-
ance alarm. You cannot set this attribute.
OC Name
Shows the full name of the operation context with which the alarm is associ-
ated. You cannot set this attribute.
Original Severity
Shows the original severity of the alarm. You cannot set this attribute.
Perceived Severity
Shows the OSI and ITU-T severity level, assigned to the alarm by the equip-
ment or by the alarm rule that generated it. You cannot set this attribute.
Value Description
MA268 • Rev. B1 83
Tellabs® 6300 Network Manager 6 Operation Context and Alarm Attributes
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
Value Description
Probable Cause
Shows the probable cause of the alarm. See Chapter 11 for a complete list of
OSI and ITU-T probable causes. For alarms generated by alarm rules on
SNMP agents, 8 additional probable causes may appear (see ‘Probable Cause’
on page 93). Example: An NE will generate an alarm with the probable cause
LossOfSignal, if a cable rupture occurs. You cannot set this attribute.
Rule Name
Shows the name of the alarm rule that generated the alarm. You cannot set this
attribute.
Service Provider
Not used.
Service User
Not used.
Specific Problems
Describes the probable cause in more detail.
84 MA268 • Rev. B1
Tellabs® 6300 Network Manager 6 Operation Context and Alarm Attributes
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
Target Entities
Shows the names of the entities that will react to the alarm. This is usually the
same entity as Managed Object (see ‘Managed Object’ on page 83). You cannot
set this attribute.
Threshold Info
Applies to alarms generated because a threshold has been exceeded, for in-
stance a threshold specified in the Capacity Alarm Threshold attribute for an
operation context (see ‘Capacity Alarm Threshold’ on page 67). You cannot set
this attribute. It consists of a number of fields showing, for instance, the
threshold in question (triggerThreshold) and the actual value that was ob-
served (observedValue).
Trend Indication
Shows the development of the alarm. You cannot set this attribute.
Value
Less Severe
No Change
More Severe
User Identifier
Identifies the user that created the alarm object. The text is free-form and is de-
fined by the user.
User Text
A free-form text string defined by the user who created the alarm object.
MA268 • Rev. B1 85
Tellabs® 6300 Network Manager 6 Operation Context and Alarm Attributes
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
Description You cannot set the Status attributes for alarm objects.
Value Description
Value Description
86 MA268 • Rev. B1
Tellabs® 6300 Network Manager 6 Operation Context and Alarm Attributes
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
Closed By
Shows a list of the associated TTRs that have been closed.
Creation Timestamp
Shows when the alarm was created as an object in Tellabs 6300 manager.
Escalated Alarm
Shows whether the alarm has escalated.
Value Description
Handled By
Shows the TTR (or list of TTRs) with which the alarm is associated.
Problem Status
Shows the status of the problem.
Value Description
MA268 • Rev. B1 87
Tellabs® 6300 Network Manager 6 Operation Context and Alarm Attributes
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
State
Shows the state of the alarm.
Value Description
Description The Counters attributes for alarm objects describe how many alarms of a sim-
ilar type that have been received.
Problem Occurrences
Shows the total number of alarms that have been received for the same prob-
lem.
88 MA268 • Rev. B1
Tellabs® 6300 Network Manager 6 Operation Context and Alarm Attributes
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
SA Total
Shows the current number of similar alarms associated with the alarm object.
MA268 • Rev. B1 89
Tellabs® 6300 Network Manager 6 Operation Context and Alarm Attributes
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
90 MA268 • Rev. B1
Tellabs® 6300 Network Manager 7 Alarm Rule Attributes
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
Overview This chapter describes the attributes for the alarm rule entity. This entity is
used to help equipment generate alarms, as described in ‘2.1.2 The Alarm
Rule’ on page 22.
Most alarm rule attributes are conveniently contained in a special alarm rule
attribute group named Rule attributes as well as in the usual attribute groups.
The only exception is the Status attribute Error Entity (see ‘Error Entity’ on
page 99). Therefore, an alarm rule is most easily shown and modified by using
Show and Set with the Rule attributes group.
Domain
Determines to which domain the alarm rule applies. Set the attribute to the
name of the domain.
Rules for entity names The following rules apply to entity names:
• The name must be unique among all global entities.
• The maximum length of an entity name is 511 characters.
• The following characters are allowed:
• !$-_0123456789
• abcdefghijklmnopqrstuvwxyz
• ABCDEFGHIJKLMNOPQRSTUVWXYZ
• If Tellabs 6300 manager is configured to support special national charac-
ters, an extended set of characters can be used, for instance special Scandi-
navian characters such as æ, ø and å.
• If the entity name is enclosed in quotation marks (“ “), an extended set of
characters can be used, for instance spaces, if you want to break the name
into multiple words. The following characters can be used:
• #%&’()*+,./:;<=>?@[\]^{|}~
Nick Name
Allows you to specify a descriptive name for the alarm rule icon.
A nick name can be defined during registration of an entity. If you define a
nick name, this name appears below the entity icon in the map window in-
stead of the entity name. This is useful if your network plan uses abbreviated
names and you want to show more descriptive names in the map window.
Note: The nick name is not an attribute. It is associated with the entity icon in
the map window in which the entity was created. If the entity is regis-
MA268 • Rev. B1 91
Tellabs® 6300 Network Manager 7 Alarm Rule Attributes
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
tered in two domains, it may have different nick names in the two map
windows. Therefore, you cannot show or set the nick name using the
Show and Set operations. If you need to change the nick name after reg-
istration, use the Change Entity Attributes... item in the pop-up menu.
Severity
Determines the OSI and ITU-T severity level that is assigned to alarms that are
generated when the alarm rule is fulfilled.
Value Description
Auto Enable
Determines whether the alarm rule is enabled automatically when it is creat-
ed. Later you can disable and enable it using the Disable and Enable opera-
tions (see ‘9.2 Special Operations for Alarm Rules’ on page 112).
Value Description
Category
Determines whether the alarm rule belongs to a user-defined group. Set the
attribute to the name of the group.
Description
Allows you to assign a user-defined note describing the alarm, for instance a
description of the circumstances in which the alarms occurred or of actions to
be taken. You may use up to 255 characters.
92 MA268 • Rev. B1
Tellabs® 6300 Network Manager 7 Alarm Rule Attributes
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
Event Type
Assigns a predefined alarm type to the alarms generated by the alarm rule.
Note: This attribute is not implemented. All alarms generated by alarm rules
have Alarm Type set to QualityofServiceAlarm (see ‘Alarm Type’ on page
81).
Value
CommunicationsAlarm
EnvironmentalAlarm
EquipmentAlarm
ProcessingErrorAlarm
QualityofServiceAlarm
Probable Cause
Defines the text to be displayed, for instance, in the Alarm Handling window,
as the probable cause of the alarm. The allowed probable causes form a subset
of the OSI and ITU-T probable causes, which are listed in Appendix A.
Value
Unknown
AdapterError
ApplicationSubsystemFailure
BandwidthReduced
CallEstablishmentError
CommunicationsProtocolError
CommunicationsSubsystemFailure
ConfigurationOrCustomizationError
Congestion
CorruptData
CpuCyclesLimitExceeded
DataSetOrModemProblem
MA268 • Rev. B1 93
Tellabs® 6300 Network Manager 7 Alarm Rule Attributes
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
Value
DegradedSignal
DTE-DCEInterfaceError
EnclosureDoorOpen
EquipmentMalfunction
ExcessiveVibration
FileError
FireDetected
FloodDetected
FramingError
HeatingOrVentilationOrCoolingSystemProblem
HumidityUnacceptable
InputOutputDeviceError
InputDeviceError
LANError
LeakDetected
LocalNodeTransmissionError
LossOfFrame
LossOfSignal
MaterialSupplyExausted
MultiplexerProblem
OutofMemory
OutputDeviceError
PerformanceDegraded
PowerProblem
PressureUnacceptable
ProcessorProblem
PumpFailure
QueueSizeExceeded
ReceiveFailure
ReceiverFailure
RemoteNodeTransmissionError
ResourceAtOrNearingCapacity
ResponseTimeExcessive
94 MA268 • Rev. B1
Tellabs® 6300 Network Manager 7 Alarm Rule Attributes
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
Value
RetransmissionRateExcessive
SoftwareError
SoftwareProgramAbnormallyTerminated
SoftwareProgramError
StorageCapacityProblem
TemperatureUnacceptable
ThresholdCrossed
TimingProblem
ToxicLeakDetected
TransmitFailure
TransmitterFailure
UnderlyingResourceUnavailable
VersionMismatch
SnmpTrapColdStart
SnmpTrapWarmStart
SnmpTrapLinkDown
SnmpTrapLinkUp
SnmpTrapAuthenticationFailure
SnmpTrapEgpNeighborloss
SnmpTrapEnterpriseSpecific
SnmpTrapLinkUpDown
Rule Expression
Not used. Applies to expression rules only.
Start Time
Does not apply to expression rules. Determines when the monitoring of the
entity will start. The default setting is now. The format is yyyy-mm-dd-
hh:mm:ss.
Example: 1997-07-30-16:00:00
End Time
Does not apply to expression rules. Determines when the monitoring of the
entity will stop. The default setting is never. The format is yyyy-mm-dd-
hh:mm:ss.
Example: 1997-08-31-16:00:00
MA268 • Rev. B1 95
Tellabs® 6300 Network Manager 7 Alarm Rule Attributes
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
Polling Interval
Applies to change of rules and comparison rules only. Determines the interval
between two subsequent data readings. The default setting is 15 minutes. The
format is hh:mm:ss.
Example: 00:30:00
Duration Interval
Applies only to comparison rules collecting statistics. Determines the length
of time to collect statistics. The default setting is one minute. The format is
hh:mm:ss.
Example: 00:02:00
Entity
Does not apply to expression rules. Determines to which global entity the
alarm rule applies. Specify the full name (including the entity group) or use a
wildcard.
Example: AC1_30 ac1_1
Attribute Name
Applies to change of rules and comparison rules only. Determines which at-
tribute is monitored.
Example: equipment module aggr_pos_3 laser temperature
Relational Operator
Applies to comparison rules only. Determines the relational operator of the
comparison.
Value Description
EQ Equal to
LT Less than
GT Greater than
LE Less than or equal to
GE Greater than or equal to
NE Not equal to
Comparison Values
Applies to change of rules only. Determines how the attribute is required to
change to generate an alarm. Specify a combination of value(s) and wild-
card(s).
Value Description
96 MA268 • Rev. B1
Tellabs® 6300 Network Manager 7 Alarm Rule Attributes
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
Value Description
Comparison Value
Applies to comparison rules only. Determines the constant value that the at-
tribute value is compared to.
Event Name
Applies to occurs rules and occurs n time rules only. Determines which event
is monitored.
Example: For a rule on an SNMP (Simple Network Management Protocol)
agent, the possible event names are:
Value
COLDSTART
WARMSTART
LINKDOWN
LINKUP
AUTHENTICATIONFAILURE
EGPNEIGHBORLOSS
ENTERPRISESPECIFIC
IPREACHABILITYUP
IPREACHABILITYDOWN
Count
Applies to occurs n time rules only. Specifies the number of times the moni-
tored event must occur within the time period specified by Delta Time to gen-
erate an alarm (see ‘Delta Time’ on page 97).
Example: 3 (with Delta Time set to 01:00:00, the event must occur three times
within one hour).
Delta Time
Applies to occurs n time rules only. Specifies the time period during which the
monitored event should occur the number of times specified by Count to gen-
erate an alarm (see ‘Count’ on page 97).
Example: 01:00:00 (with Count set to 3, the event should occur three times
within one hour).
MA268 • Rev. B1 97
Tellabs® 6300 Network Manager 7 Alarm Rule Attributes
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
Description The Identifiers attribute for alarm rules is also contained in the Alarm Rules at-
tribute group.
Name
Shows the Tellabs 6300 manager name of the alarm rule. You cannot set this
attribute.
Description All Characteristics attributes for alarm rules are also contained in the Alarm
Rules attribute group.
Category
Determines whether the alarm rule belongs to a user-defined group (see ‘Cat-
egory’ on page 92). Not shown if it has no value.
Description
Allows you to attach a note to the alarm rule (see ‘Description’ on page 92).
Not shown if it has no value.
Expression
Defines the expression used to evaluate the rule. There are four types of ex-
pressions, namely change of rules, comparison rules, occurs rules and occurs
n time rules. Refer to [10] for details on the proper syntax of alarm rule expres-
sions.
Probable Cause
Defines the text to be displayed, for instance, in the Alarm Handling window,
as the probable cause of the alarm (see ‘Probable Cause’ on page 93).
Severity
Determines the OSI and ITU-T severity level that is assigned to alarms that are
generated when the alarm rule is fulfilled (see ‘Severity’ on page 92).
98 MA268 • Rev. B1
Tellabs® 6300 Network Manager 7 Alarm Rule Attributes
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
Description All Status attributes for alarm rules, except Error Entity, are also contained in
the Alarm Rules attribute group. They cannot be set.
Warning: There is a set of Status attributes for each user. This means, for in-
stance, that an alarm rule may be enabled by someone else, even
though it appears to you as disabled in a Show Status operation (see
‘State’ on page 100). If you enable an alarm rule that is already en-
abled, alarms due to this rule will be duplicated and appear twice.
Current Severity
Shows a severity determined by Result of Last Evaluation (see page 99) and Se-
verity (see page 92).
Value Description
Disable Time
Only present if the alarm rule has been disabled. Shows when this happened.
Error Condition
Only present if an error occurred during evaluation of the alarm rule expres-
sion. Holds an error message.
Error Entity
Holds the Tellabs 6300 manager name of the equipment monitored by the
alarm rule. This attribute is not contained in the Alarm Rules attribute group.
Value Description
MA268 • Rev. B1 99
Tellabs® 6300 Network Manager 7 Alarm Rule Attributes
Working in Tellabs 6300 Manager Vol. 3: Handling
Alarms
Value Description
State
Shows whether the alarm rule is working.
Value Description
Substate
Gives further information about the state of the alarm rule.
Value Description
Description All Counters attributes for alarm rules are also contained in the Alarm Rules
attribute group. They cannot be set.
Creation Timestamp
Holds the time for the creation of the alarm rule.
Evaluation Error
Counts the number of times that the evaluation of the alarm rule expression
has resulted in an error, since the alarm rule was last enabled. To reset the at-
tribute, perform a Disable operation followed by an Enable operation.
Evaluation False
Counts the number of times that the alarm rule expression has been evaluated
to the value False, since the alarm rule was last enabled. To reset the attribute,
perform a Disable operation followed by an Enable operation.
Evaluation True
Counts the number of times that the alarm rule expression has been evaluated
to the value True, that is the number of times the alarm rule has fired, since the
alarm rule was last enabled. To reset the attribute, perform a Disable operation
followed by an Enable operation.
Overview This chapter describes the attribute values for various Tellabs 6300 manager
alarms received during self-monitoring.
8.1 Introduction
Alarm recognition Tellabs 6300 manager monitors itself on a number of points to guarantee that
it is working properly. Key aspects of computer hardware, computer software
and of the data communication network are monitored. You can recognize a
Tellabs 6300 manager alarm by its values for the following attributes:
• Managed Object. Appears as Managed Object in the Real Time View win-
dow.
• Perceived Severity. Appears as Sev. in the Real Time View window.
• Alarm Type. Appears as Type in the Real Time View window.
• Probable Cause. Appears as Cause in the Real Time View window.
• Additional Text. Appears as Text in the Real Time View window.
Introduction Often, the computer hardware of Tellabs 6300 manager cannot generate
alarms itself. Therefore, it is monitored by means of alarm rules, which recur-
rently check key parameters. If severe deviations from desired values are
found, alarms are generated.
All computer hardware alarms will appear in the oc_sys_man operation con-
text since the alarm rules for computer hardware are placed in the sys_man
domain (and subdomains thereof).
Description All SNMP entities of the sys_man domain can be monitored using the IP Pol-
ler entity which by default is registered in this domain. The IP Poller polls all
SNMP entities for IP reachability every 60 seconds. An IP Poller alarm is au-
tomatically cleared when the SNMP entity is reachable again.
Attribute values The table shows the attribute values of the IP Poller alarms.
Attribute Value
Attribute Value
Description A bridge has two interfaces: an interface for the local area network (Ethernet)
and an interface for transmitting Ethernet traffic on a 2 Mbit/s leased line.
Alarm rules for supervision of the Ethernet local area network are found in the
sys_man domain.
Attribute values The table shows the attribute values of the Ethernet LAN alarms.
Attribute Value
Description A bridge has two interfaces: an interface for the local area network (Ethernet)
and an interface for transmitting Ethernet traffic on a 2 Mbit/s leased line.
Alarm rules for supervision of LAN-interconnecting leased lines are found in
the sys_man domain.
Attribute values The table shows the attribute values of the Ethernet leased lines alarms.
Attribute Value
Description The disk storage of Tellabs 6300 manager is divided into a number of disk do-
mains. Each disk domain stores characteristic information, for instance pro-
gram files of Tellabs 6300 manager or alarm reports.
Each disk domain is monitored by an alarm rule, generating an alarm when
the disk domain is 95% full. The alarm rules are found in the computersystem
domain.
Attribute values The table shows the attribute values of the disk storage alarms.
Attribute Value
Note: The term partition is used for disk domain in the Additional Text at-
tribute.
Introduction Tellabs 6300 manager is based on software components that are able to detect
many different kinds of errors and violations. Appropriate error messages
will be displayed if errors are detected during operation.
• An alarm log is nearly full (see Section 8.3.1).
• No network operator or other Tellabs 6300 manager user seems to re-
spond to alarms in a certain operation context (see Section 8.3.2).
Both types of alarms will appear in the oc_man_env operation context.
Description If an alarm log is getting nearly full, alarms with increasing severity may be
generated. The number of alarms, and when they are generated, are deter-
mined by the Capacity Alarm Threshold attribute (see page 67). A maximum of
four alarms may be generated, ranging from Warning to Critical.
Attribute values The table shows the attribute values of the alarm log alarms.
Attribute Value
Attribute Value
Additional Text
Description If an alarm is not acknowledged within a certain fixed time, a new alarm may
be generated to notify, for instance, a management headquarter that some-
thing may be wrong.
Attribute values The table shows the attribute values of the alarm escalation alarms.
Attribute Value
Additional Text
Note: This alarm occurs only if your Tellabs 6300 manager includes the alarm
escalation function.
9 Operations
Overview This chapter describes the special operations and their parameters for the en-
tities connected to alarms. Default parameter values, if any, are either men-
tioned in the text or indicated in the tables by underscore.
Register
Description Registers an operation context that has previously been partially registered.
Managing Director
Specifies the managing director for the selected operation context.
Operation
Determines whether the registration will be completed (if possible) or forced
to be partial.
Value Description
Directory
Resume
Suspend
Purge_alarms
Description Permanently removes alarms of a certain age and severity from the alarm log.
Therefore, you cannot access purged alarms from the Alarms View window.
The age and severity are determined by the AO Age and Severity parameters.
Alarm purging can be performed manually or can be set up to be performed
automatically (as a background process), for instance every day at 02:00. You
set up background alarm purging by specifying one or more of the time pa-
rameters Begin Time, End Time and Interval. If the three time parameters are all
left blank, a single, manual alarm purging is performed.
If you set up automatic purging, it is recommended that you set the State pa-
rameter to Archived in order to ensure that alarms are not purged before they
are archived.
Note: As default, automatic purging of all terminated alarms older than 60
days is set up to be performed once a day.
Note: A running (automatic) Purge_alarms operation cannot be modified. Use
the Cancel_purge operation (see page 110) followed by a new
Purge_alarms operation to modify a background alarm purging pro-
cess. The current state of a background alarm purging process can be
examined with a Show operation performed on the Status attributes of
the operation context in question.
Note: You do not have to use the Purge_alarms operation to set up an auto-
matic purge process. Instead, you can set the Purge parameter of the Ar-
chive operation to True. This will cause alarms to be purged when they
have been archived.
AO Age
Defines an age limit for purging. Alarms older than the specified age will be
purged, provided the Severity and State conditions are fulfilled. The format is
dd-hh:mm:ss. The default setting is 0, requiring no age for an alarm to be
purged.
Example: 45-00:00:00
Severity
Defines the severity level for purging. Alarms with severity less than or equal
to the specified level will be purged, provided the AO Age and State condi-
tions are fulfilled. The default setting is none, in which case all alarms fulfill-
ing the AO Age and State conditions are purged.
Value Description
Value Description
State
Determines which alarms fulfilling the specified Severity and AO Age condi-
tions will be purged.
Value Description
Begin Time
Determines when the alarm purging operation starts. If specified, an automat-
ic alarm purging process will be set up in the background (see the introduc-
tion to this section). The format is yyyy-mm-dd, hh:mm:ss or yyyy-mm-dd-
hh:mm:ss. If the date part is omitted, the current date is used; if the time part is
omitted, purging starts at midnight. The default setting is now.
Example: 1997-05-15-10:30:00
End Time
Determines when the alarm purging operation stops. If specified, an automat-
ic alarm purging process will be set up in the background (see the introduc-
tion to this section). The format is yyyy-mm-dd, hh:mm:ss or yyyy-mm-dd-
hh:mm:ss. If the date part is omitted, the current date is used; if the time part is
omitted, purging stops at midnight. The default setting is December 31st 9999.
Example: 1997-06-15-10:30:00
Interval
Specifies the interval between two subsequent alarm purging operations for
an automatic background alarm purging process. If specified, an automatic
alarm purging process will be set up in the background (see the introduction
to this section). The format is dd-hh:mm:ss. The minimum permitted interval is
1 minute. The default setting is one day.
Example: 0-01:00:00
Cancel_purge
Description Cancels automatic alarm purging for the selected operation context. See
‘Purge_alarms’ on page 108.
Archive
Description Archives terminated alarms of a certain age and severity in an external data-
base. The age and severity are determined by the AO Age and Severity param-
eters.
Archiving can be performed manually or can be set up to be performed auto-
matically (as a background process), for instance every 24 hours. You set up
background archiving by specifying one or more of the time parameters Begin
Time, End Time and Interval. If the three time parameters are all left blank, a
single, manual archiving is performed.
Note: As default, automatic archiving of all Critical and Major alarms older
than 2 weeks is set up to be performed once a day.
Note: Before you perform an Archive operation, be sure that the system man-
ager has initialized a database for archiving alarms, see [4].
Note: A running (automatic) Archive operation cannot be modified. Use the
Cancel_archive operation (see page 112) followed by a new Archive op-
eration to modify a background archiving process. The current state of
a background archiving process can be examined with a Show opera-
tion performed on the Status attributes of the operation context in ques-
tion.
database name
Specifies the name of the database into which alarms are to be archived. Use
only database names in accordance with the established convention in your
setting. The default setting is temip_ah.
Sequence Name
Specifies the name of the current archive. Use only sequence names in accor-
dance with the established convention in your setting. The default setting is
oc_archive.
Sequence Number
Specifies the sequence number of the current archive. Use only sequence num-
bers in accordance with the established convention in your setting. The de-
fault setting is 0.
AO Age
Defines an age limit for archiving. Alarms older than the specified age will be
archived, provided the Severity condition is fulfilled. The format is dd-
hh:mm:ss. The default setting is 0, requiring no age for an alarm to be archived.
Example: 7-00:00:00
Severity
Defines the severity level for archiving. Alarms with severities greater than or
equal to the specified level will be archived, provided the AO Age condition is
fulfilled. The default setting is none, in which case all terminated alarms ful-
filling the AO Age condition are archived.
Value Description
Purge
Determines whether alarms will be purged automatically from the alarm log
when archived.
Value Description
Begin Time
Determines when the archiving operation starts. If specified, an automatic ar-
chiving process will be set up in the background (see the introduction to this
section). The format is yyyy-mm-dd, hh:mm:ss or yyyy-mm-dd-hh:mm:ss. If
the date part is omitted, the current date is used; if the time part is omitted,
archiving starts at midnight. The default setting is now.
Example: 1997-05-15-10:30:00
End Time
Determines when the archiving operation stops. If specified, an automatic ar-
chiving process will be set up in the background (see the introduction to this
section). The format is yyyy-mm-dd, hh:mm:ss or yyyy-mm-dd-hh:mm:ss. If
the date part is omitted, the current date is used; if the time part is omitted,
archiving stops at midnight. The default setting is December 31st 9999.
Example: 1997-05-15-10:30:00
Interval
Specifies the interval between two subsequent archiving operations for an au-
tomatic background archiving process. If specified, an automatic archiving
process will be set up in the background (see the introduction to this section).
The format is dd-hh:mm:ss. The minimum permitted interval is 1 minute. The
default setting is one day.
Example: 0-01:00:00
Cancel_archive
Description Cancels automatic alarm archiving for the selected operation context. See Ar-
chive in Section 29.3.7.
Copy
Description Copies the selected alarm rule into the same or another domain. You specify
the target domain in the New Domain Name parameter. The target may be an
existing domain or a new domain. Refer to [9] for further information on the
Copy operation.
Value Description
Disable
Enable
Summarize
Acknowledge
Terminate
Description Terminates the selected alarm(s). The alarm(s) will be removed from the alarm
information list in the Alarm Handling window, but they can be studied in the
Alarms View window.
Overview Here the individual alarms of the Tellabs 6300 manager are described. The
alarms are sorted alphabetically by their alarm text.
AIS
Appears when an AIS is detected in the signal.
Note: This alarm can be caused, for example, by faulty configuration of a node
map.
Appears for MSP 1+1 protection when the switching type is bidirectional, and
an illegal request code is received consistently.
APS timeout
Appears when the APS signalling does not work correctly, because the port in
question has not received a valid response to a switch request within 2.5 sec-
onds. In most cases the response should originate from the NE at the far end,
but in cases with multiple requests in a ring, a valid response could originate
from another NE.
APS unstable
Appears for MS-SPRing protection when one of the APS signalling channels
is declared unstable.
Appears for MSP 1+1 protection when the APS signalling does not work cor-
rectly, because the port in question has not received identical values in bits 1
to 5 of the K1 and K2 bytes for three consecutive frames out of the last twelve
frames.
Battery discharging
For 6310, 6320, 6330 and 6370.
Applies when Input is selected in the Direction: drop-down list, and Battery
discharging is selected in the Input Alarm Text: drop-down list for the auxiliary
port in question. Appears when the signal on the port is high or low depend-
ing on the value selected in the Input Polarity: drop-down list.
For 6325, 6340, 6345 and 6350.
Applies when the AUX port in question is configured as an input AUX port
with Alarm Text set to Battery discharging. Appears when the signal on the
port is high or low depending on the setting of Polarity.
Battery failure
For 6310, 6320, 6330 and 6370.
Applies when Input is selected in the Direction: drop-down list, and Battery
failure is selected in the Input Alarm Text: drop-down list for the auxiliary port
in question. Appears when the signal on the port is high or low depending on
the value selected in the Input Polarity: drop-down list.
For 6325, 6340, 6345 and 6350.
Applies when the AUX port in question is configured as an input AUX port
with Alarm Text set to Battery failure. Appears when the signal on the port is
high or low depending on the setting of Polarity.
Cabling error
Appears when the cable between the main subrack and a tributary subrack in
question is not connected.
Configuration error
Appears when resynchronization has been selected for a module other than a
TEX1 Resync or TEX1P Resync (mon PDH) module.
Degraded signal
Appears when the bit error ratio for the signal in question exceeds the thresh-
old defined in the corresponding BER Threshold attribute.
Engine failure
For 6310, 6320, 6330 and 6370.
Applies when Input is selected in the Direction: drop-down list, and Engine fail-
ure is selected in the Input Alarm Text: drop-down list for the auxiliary port in
question. Appears when the signal on the port is high or low depending on
the value selected in the Input Polarity: drop-down list.
For 6325, 6340, 6345 and 6350.
Applies when the AUX port in question is configured as an input AUX port
with Alarm Text set to Engine failure. Appears when the signal on the port is
high or low depending on the setting of Polarity.
ETEX critical
Appears if one or more critical alarms are active in the ETEX NE in question.
ETEX major
Appears if one or more major alarms are active in the ETEX NE in question.
ETEX minor
Appears if one or more minor alarms are active in the ETEX NE in question.
ETEX warning
Appears if one or more warning alarms are active in the ETEX NE in question.
Excessive errors
Appears when the bit error ratio in the multiplex section exceeds 10-3.
Explosive gas
For 6310, 6320, 6330 and 6370.
Applies when Input is selected in the Direction: drop-down list, and Explosive
gas is selected in the Input Alarm Text: drop-down list for the auxiliary port in
question. Appears when the signal on the port is high or low depending on
the value selected in the Input Polarity: drop-down list.
For 6325, 6340, 6345 and 6350.
Applies when the AUX port in question is configured as an input AUX port
with Alarm Text set to Explosive gas. Appears when the signal on the port is
high or low depending on the setting of Polarity.
Fan degraded
One of the three fans in the fan module is not functioning correctly. This may
be due to a reduced nominal normal speed or that the fan has stopped com-
pletely.
Fan failure
Two or all of the fans in the fan module are not functioning correctly. This may
be due to a reduced nominal normal speed or that the fans have stopped com-
pletely.
Fire
For 6310, 6320, 6330 and 6370.
Applies when Input is selected in the Direction: drop-down list, and Fire is se-
lected in the Input Alarm Text: drop-down list for the auxiliary port in question.
Appears when the signal on the port is high or low depending on the value
selected in the Input Polarity: drop-down list.
For 6325, 6340, 6345 and 6350.
Applies when the AUX port in question is configured as an input AUX port
with Alarm Text set to Fire. Appears when the signal on the port is high or low
depending on the setting of Polarity.
Flood
For 6310, 6320, 6330 and 6370.
Applies when Input is selected in the Direction: drop-down list, and Flood is
selected in the Input Alarm Text: drop-down list for the auxiliary port in ques-
tion. Appears when the signal on the port is high or low depending on the val-
ue selected in the Input Polarity: drop-down list.
For 6325, 6340, 6345 and 6350.
Applies when the AUX port in question is configured as an input AUX port
with Alarm Text set to Flood. Appears when the signal on the port is high or
low depending on the setting of Polarity.
FPGA failure
Appears when the FPGA file is missing for the slot in question.
Fuse failure
For 6310, 6320, 6330 and 6370.
Applies when Input is selected in the Direction: drop-down list, and Fuse fail-
ure is selected in the Input Alarm Text: drop-down list for the auxiliary port in
question. Appears when the signal on the port is high or low depending on
the value selected in the Input Polarity: drop-down list.
For 6325, 6340, 6345 and 6350.
Applies when the AUX port in question is configured as an input AUX port
with Alarm Text set to Fuse failure. Appears when the signal on the port is high
or low depending on the setting of Polarity.
Generator failure
For 6310, 6320, 6330 and 6370.
Applies when Input is selected in the Direction: drop-down list, and Generator
failure is selected in the Input Alarm Text: drop-down list for the auxiliary port
in question. Appears when the signal on the port is high or low depending on
the value selected in the Input Polarity: drop-down list.
For 6325, 6340, 6345 and 6350.
Applies when the AUX port in question is configured as an input AUX port
with Alarm Text set to Generator failure. Appears when the signal on the port
is high or low depending on the setting of Polarity.
High humidity
For 6310, 6320, 6330 and 6370.
Applies when Input is selected in the Direction: drop-down list, and High hu-
midity is selected in the Input Alarm Text: drop-down list for the auxiliary port
in question. Appears when the signal on the port is high or low depending on
the value selected in the Input Polarity: drop-down list.
For 6325, 6340, 6345 and 6350.
Applies when the AUX port in question is configured as an input AUX port
with Alarm Text set to High humidity. Appears when the signal on the port is
high or low depending on the setting of Polarity.
High temperature
For 6310, 6320, 6330 and 6370.
Applies when Input is selected in the Direction: drop-down list, and High tem-
perature is selected in the Input Alarm Text: drop-down list for the auxiliary
port in question. Appears when the signal on the port is high or low depend-
ing on the value selected in the Input Polarity: drop-down list.
For 6325, 6340, 6345 and 6350.
Applies when the AUX port in question is configured as an input AUX port
with Alarm Text set to High temperature. Appears when the signal on the port
is high or low depending on the setting of Polarity.
High wind
For 6310, 6320, 6330 and 6370.
Applies when Input is selected in the Direction: drop-down list, and High wind
is selected in the Input Alarm Text: drop-down list for the auxiliary port in
question. Appears when the signal on the port is high or low depending on
the value selected in the Input Polarity: drop-down list.
For 6325, 6340, 6345 and 6350.
Applies when the AUX port in question is configured as an input AUX port
with Alarm Text set to High wind. Appears when the signal on the port is high
or low depending on the setting of Polarity.
Ice build up
For 6310, 6320, 6330 and 6370.
Applies when Input is selected in the Direction: drop-down list, and Ice build
up is selected in the Input Alarm Text: drop-down list for the auxiliary port in
question. Appears when the signal on the port is high or low depending on
the value selected in the Input Polarity: drop-down list.
For 6325, 6340, 6345 and 6350.
Applies when the AUX port in question is configured as an input AUX port
with Alarm Text set to Ice build up. Appears when the signal on the port is high
or low depending on the setting of Polarity.
Intrusion detection
For 6310, 6320, 6330 and 6370.
Applies when Input is selected in the Direction: drop-down list, and Intrusion
detection is selected in the Input Alarm Text: drop-down list for the auxiliary
port in question. Appears when the signal on the port is high or low depend-
ing on the value selected in the Input Polarity: drop-down list.
For 6325, 6340, 6345 and 6350.
Applies when the AUX port in question is configured as an input AUX port
with Alarm Text set to Intrusion detection. Appears when the signal on the port
is high or low depending on the setting of Polarity.
ISI Degraded
Appears when erroneous bits are transferred between modules on the internal
section interface (the NE backplane). This could indicate a problem with one
or more of the modules.
ISI Failure
Appears when there is an equipment failure. Either a module or the backplane
itself has a critical error and needs immediate attention.
Laser degraded
Appears when the laser power, the laser modulation current, the laser bias
current or the laser temperature increases above or decreases below fixed
threshold values defined by the equipment.
Loss of alignment
Appears when the alignment of the incoming signal is lost.
Loss of frame
Appears when the frame alignment of the incoming signal is lost.
Loss of multiframe
Appears when the multiframe alignment of the incoming signal is lost.
Loss of pointer
Appears when the pointer in the incoming signal cannot be recovered correct-
ly.
Loss of signal
Appears when the incoming signal is lost.
Loss of timing
For 6330.
Appears when the module in question has lost its timing signal (the internal
timing reference T0 of the NE).
For 6340.
Appears when the module in question has lost its timing signal from the in-
ternal clock.
For 6345 and 6350.
Appears when the M3-1 or M6-1 module has lost the T0 clock from the corre-
sponding M3-1 or M6-1 module.
Low fuel
For 6310, 6320, 6330 and 6370.
Applies when Input is selected in the Direction: drop-down list, and Low fuel
is selected in the Input Alarm Text: drop-down list for the auxiliary port in
question. Appears when the signal on the port is high or low depending on
the value selected in the Input Polarity: drop-down list.
For 6325, 6340, 6345 and 6350.
Applies when the AUX port in question is configured as an input AUX port
with Alarm Text set to Low fuel. Appears when the signal on the port is high or
low depending on the setting of Polarity.
Low humidity
For 6310, 6320, 6330 and 6370.
Applies when Input is selected in the Direction: drop-down list, and Low hu-
midity is selected in the Input Alarm Text: drop-down list for the auxiliary port
in question. Appears when the signal on the port is high or low depending on
the value selected in the Input Polarity: drop-down list.
For 6325, 6340, 6345 and 6350.
Applies when the AUX port in question is configured as an input AUX port
with Alarm Text set to Low humidity. Appears when the signal on the port is
high or low depending on the setting of Polarity.
Low temperature
For 6310, 6320, 6330 and 6370.
Applies when Input is selected in the Direction: drop-down list, and Low tem-
perature is selected in the Input Alarm Text: drop-down list for the auxiliary
port in question. Appears when the signal on the port is high or low depend-
ing on the value selected in the Input Polarity: drop-down list.
For 6325, 6340, 6345 and 6350.
Applies when the AUX port in question is configured as an input AUX port
with Alarm Text set to Low temperature. Appears when the signal on the port
is high or low depending on the setting of Polarity.
Low water
For 6310, 6320, 6330 and 6370.
Applies when Input is selected in the Direction: drop-down list, and Low water
is selected in the Input Alarm Text: drop-down list for the auxiliary port in
question. Appears when the signal on the port is high or low depending on
the value selected in the Input Polarity: drop-down list.
For 6325, 6340, 6345 and 6350.
Applies when the AUX port in question is configured as an input AUX port
with Alarm Text set to Low water. Appears when the signal on the port is high
or low depending on the setting of Polarity.
MSP IF degraded
Appears when the number of parity errors on the internal MSP interface sec-
tion in question increases above a fixed threshold value defined by the factory.
MSP IF failure
Appears when the frame signal is lost on the internal MSP interface section in
question.
Output degraded
Appears when the power of the output signal is so low that it is considered
lost.
Path unequipped
Appears when the corresponding termination point is not connected.
Appears when the VC-4, VC-3 or VC-12 channel awaits real traffic from the far
end, but the value of Signal Label for Payload Structure or Received Signal La-
bel is Unequipped.
Power down
Appears when the subrack has been powered down.
fixed threshold values defined by the equipment, or when the tertiary power
for the module in question is lost.
For 6330.
Appears when the tertiary power for the module in question is lost.
Pump failure
For 6310, 6320, 6330 and 6370.
Applies when Input is selected in the Direction: drop-down list, and Pump fail-
ure is selected in the Input Alarm Text: drop-down list for the auxiliary port in
question. Appears when the signal on the port is high or low depending on
the value selected in the Input Polarity: drop-down list.
For 6325, 6340, 6345 and 6350.
Applies when the AUX port in question is configured as an input AUX port
with Alarm Text set to Pump failure. Appears when the signal on the port is
high or low depending on the setting of Polarity.
RDI
Appears when an RDI is received in the overhead. An RDI indicates that the
other end of the section or path does not receive a signal from this end.
Receiver overload
Appears when the receiver detects an overload on the input port.
Rectifier failure
For 6310, 6320, 6330 and 6370.
Applies when Input is selected in the Direction: drop-down list, and Rectifier
failure is selected in the Input Alarm Text: drop-down list for the auxiliary port
in question. Appears when the signal on the port is high or low depending on
the value selected in the Input Polarity: drop-down list.
For 6325, 6340, 6345 and 6350.
Applies when the AUX port in question is configured as an input AUX port
with Alarm Text set to Rectifier failure. Appears when the signal on the port is
high or low depending on the setting of Polarity.
RTM failure
Appears when the real-time marker is missing in the module in question.
SC AIS inserted
Appears if the administrative state of the station clock output in question is
not locked, and the quality level of the signal from selector C falls below the
configured quality level threshold of the output causing the output to send an
AIS.
Slot mismatch
Appears if the actual slot of an actual ETEX module does not match the slot
address stored in the module.
Smoke
For 6310, 6320, 6330 and 6370.
Applies when Input is selected in the Direction: drop-down list, and Smoke is
selected in the Input Alarm Text: drop-down list for the auxiliary port in ques-
tion. Appears when the signal on the port is high or low depending on the val-
ue selected in the Input Polarity: drop-down list.
For 6325, 6340, 6345 and 6350.
Applies when the AUX port in question is configured as an input AUX port
with Alarm Text set to Smoke. Appears when the signal on the port is high or
low depending on the setting of Polarity.
Software failure
Appears when the software used by the module in the slot in question con-
stantly resets.
SSF
Appears when an SSF (server signal fail) is detected, that is the normal signal
has been interrupted due to a failure in the server layer.
T4 output squelched
Appears when the timing source selected in the Selector C window has been
suppressed because its quality level was too low compared to the level speci-
fied in Squelch quality Threshold.
TIP missing
Appears when one or both TIP modules are missing for the SIM1e module in
question.
Toxic gas
For 6310, 6320, 6330 and 6370.
Applies when Input is selected in the Direction: drop-down list, and Toxic gas
is selected in the Input Alarm Text: drop-down list for the auxiliary port in
question. Appears when the signal on the port is high or low depending on
the value selected in the Input Polarity: drop-down list.
For 6325, 6340, 6345 and 6350.
Applies when the AUX port in question is configured as an input AUX port
with Alarm Text set to Toxic gas. Appears when the signal on the port is high
or low depending on the setting of Polarity.
Transmit degraded
Appears when power of the transmitted laser signal has degraded.
Transmit fail
Appears when the transmitted laser signal is lost.
Unit initialising
Appears when the software used by the module in the slot in question is re-
setting and rebooting.
Unit missing
Appears when a module is expected in the slot in question, but no module is
physically present in the slot.
11 Probable Causes
This chapter contains the probable causes as defined in the Open Systems In-
terconnection (OSI) framework and by the International Telecommunication
Union (ITU, former CCITT).
• Unknown
• AdapterError
• ApplicationSubsystemFailure
• BandwidthReduced
• CallEstablishmentError
• CommunicationsProtocolError
• CommunicationsSubsystemFailure
• ConfigurationOrCustomizationError
• Congestion
• CorruptData
• CpuCyclesLimitExceeded
• DataSetOrModemProblem
• DegradedSignal
• DTE-DCEInterfaceError
• EnclosureDoorOpen
• EquipmentMalfunction
• ExcessiveVibration
• FileError
• FireDetected
• FloodDetected
• FramingError
• HeatingOrVentilationOrCoolingSystemProblem
• HumidityUnacceptable
• InputOutputDeviceError
• InputDeviceError
• LANError
• LeakDetected
• LocalNodeTransmissionError
• LossOfFrame
• LossOfSignal
• MaterialSupplyExausted
• MultiplexerProblem
• OutofMemory
• OutputDeviceError
• PerformanceDegraded
• PowerProblem
• PressureUnacceptable
• ProcessorProblem
• PumpFailure
• QueueSizeExceeded
• ReceiveFailure
• ReceiverFailure
• RemoteNodeTransmissionError
• ResourceAtOrNearingCapacity
• ResponseTimeExcessive
• RetransmissionRateExcessive
• SoftwareError
• SoftwareProgramAbnormallyTerminated
• SoftwareProgramError
• StorageCapacityProblem
• TemperatureUnacceptable
• ThresholdCrossed
• TimingProblem
• ToxicLeakDetected
• TransmitFailure
• TransmitterFailure
• UnderlyingResourceUnavailable
• VersionMismatch
• SnmpTrapColdStart
• SnmpTrapWarmStart
• SnmpTrapLinkDown
• SnmpTrapLinkUp
• SnmpTrapAuthenticationFailure
• SnmpTrapEgpNeighborloss
• SnmpTrapEnterpriseSpecific
• SnmpTrapLinkUpDown
• UnspecifiedReason
• SectionTraceMismatch
• BackupFailed
• gfpLossOfClientSignal
• gfpLossOfClientSynchronization
• vcgLossOfPartialCapacity
• vcgLossOfFullCapacity
• lapfFrameMismatch
• lapfLmiLinkDown
• mplsOamTTSIMismatch
• mplsOamTTSIMismerge
• mplsOamLossOfCV
• mplsOamExcess
• etherOamLinkDown
• systemConfigUpgradeFailure
• freqOutOfRange
• lcpLinkDown
• psuInputMissing
• replacableUnitFailure
• linkShutDown
• clientSignalFail
• intraSectionFail
• intraSectionDegraded
• /* ITU-T (CCITT) probable causes from M3100 set */
• Indeterminate
• AIS
• CallSetUpFailure
• DegradedSignal_m3100
• FarEndReceiverFailure
• FramingError_m3100
• LossOfFrame_m3100
• LossOfPointer
• LossOfSignal
• PayloadTypeMismatch
• TransmissionError
• RemoteAlarmInterface
• ExcessiveBER
• PathTraceMismatch
• Unavailable
• SignalLabelMismatch
• LossOfMultiFrame
• ReceiveFailure_m3100
• TransmitFailure_m3100
• ModulationFailure
• DemodulationFailure
• BroadCastChannelFailure
• ConnectionEstablishmentError
• InvalidMessageReceived
• LocalNodeTransmissionError_m3100
• RemoteNodeTransmissionError_m3100
• RoutingFailure
• RxFail
• RxLOS
• DemodulationFail
• DemLOS
• TxFail
• TxLOS
• ModulationFail
• ModLOS
• BackplaneFailure
• DataSetProblem
• EquipmentIdentifierDuplication
• ExternalIFDeviceProblem
• LineCardProblem
• MultiplexerProblem_m3100
• NEIdentifierDuplication
• PowerProblem_m3100
• ProcessorProblem_m3100
• ProtectionPathFailure
• ReceiverFailure_m3100
• ReplaceableUnitMissing
• ReplaceableUnitTypeMismatch
• SynchronizationSourceMismatch
• TerminalProblem
• TimingProblem_m3100
• TransmitterFailure_m3100
• TrunkCardProblem
• ReplaceableUnitProblem
• RealTimeClockFailure
• AntennaFailure
• BatteryCharginFailure
• DiskFailure
• FrequencyHoppingFailure
• IODeviceError
• LossOfSynchronisation
• LossOfRedundancy
• PowerSupplyFailure
• SignalQualityEvaluationFailure
• TransceiverFailure
• AirCompressorFailure
• AirConditioningFailure
• AirDryerFailure
• BatteryDischarging
• BatteryFailure
• CommercialPowerFailure
• CoolingFanFailure
• EngineFailure
• FireDetectorFailure
• FuseFailure
• GeneratorFailure
• LowBatteryThreshold
• PumpFailure_m3100
• RectifierFailure
• RectifierHighVoltage
• RectifierLowFVoltage
• VentilationsSystemFailure
• EnclosureDoorOpen_m3100
• ExplosiveGas
• Fire
• Flood
• HighHumidity
• HighTemperature
• HighWind
• IceBuildUp
• IntrusionDetection
• LowFuel
• LowHumidity
• LowCablePressure
• LowTemperature
• LowWater
• Smoke
• ToxicGas
• CoolingSystemFailure
• ExternalEquipmentFailure
• ExternalPointFailure
• StorageCapacityProblem_m3100
• MemoryMismatch
• CorruptData_m3100
• OutOfCPUCycles
• SfwrEnvironmentProblem
• SfwrDownloadFailure
• LossOfRealTime
• Reinitialized
• ApplicationSubsystemFailure_m3100
• ConfigurationOrCustomisationError
• DatabaseInconsistency
• FileError_m3100
• OutOfMemory_m3100
• SoftwareError_m3100
• TimeoutExpired
• UnderlayingResourceUnavailable
• VersionMismatch_m3100
• BandwidthReduced_m3100
• ExcessiveErrorRate
• ExcessiveResponseTime
• ExcessiveRetransmissionRate
• ReducedLoggingCapability
• SystemResourcesOverload
• FDI
• Unequipped
• SSF
• LossOfSequence
• BDI
• LossOfAlignment
• LossOfContinuity
• AutomaticLaserShutdown
• CommunicationProblem
• laserTempOutsideLimit
• blsrDefaultKBytes
• blsrInconsistentAPSCodes
• blsrNodeIdMismatch
• blsrImproperAPSCodes
• blsrSquelching
• lossOfTimingSource
• apsChannelProcessingFailure
• apsByteFailure
• apsChannelMatchFailure
• apsModeMismatch
• lossOfTUMultiframeIndicator
• pathSelectorFailure
• localUserPartUnavailable
• q752Item1p01
• q752Item1p9
• q752Item2p9
• q752Item2p15
• q752Item2p17
• q752Item3p05
• q752Item3p10
• q752Item4p02
• q752Item4p04
• q752Item4p10
• q752Item4p12
• q752Item5p00
• q752Item5p04
• q752Item5p05
• q752Item5p06
• q752Item5p07
• remoteUserPartUnavailable
• msSPRDefaultKBytes
• msSPRInconsistentAPSCodes
• msSPRNodeIdMismatch
• msSPRImproperAPSCodes
• msSPRApsChannelProcessingFailure
• cellStarvation
• lossOfCellDelineation
• failedRestart
• LaserBiasOutOfLimit
• LaserShutdownActive
• TransmitPowerLevelLow
• TransmitPowerLevelHigh
• UserInput00
• UserInput01
• UserInput02
• UserInput03
• UserInput04
• UserInput05
• UserInput06
• UserInput07
• UserInput08
• UserInput09
• UserInput10
• UserInput11
• UserInput12
• UserInput13
• UserInput14
• UserInput15
• UserInput16
• UserInput17
• UserInput18
• UserInput19
• airFlowProblem
• fanTrayAssemblyProblem
• replaceableUnitsIncompatible
• replaceableUnitsOutOfSync
• fERFConnectivity
• fERFServer
• fERFPayload
• fEProtectionLineFailure
• mediaMissing
• switchDatabase
• switchExecutable
• lossOfSupervisoryChannel
• overheadAIS
• timingEquipmentRangeProblem
• lossOfTimingInput
• mtieMaskCrossing
• ConfigurationParameterOutOfRange
• FunctionalityNotSupported
• InternalRxFail
• ExternalPointFailure_tlab
• actualTransceiverNotExpected
• apsArchitectureMismatch
• apsInappropriateRequest
• apsIllegalRequest
• apsSelectorMismatch
• apsUnstable
• apsTimeout
• apsIllegalNodeID
• apsIllegalState
• apsDefaultSignalling
• protectionModuleUsed
• lockoutOfProtectionPending
• forcedSwitchPending
• excessiveError
• rDI
• sSF
• unequippedDefect
• sqMismatch
• maxDiffDelayExceeded
• gfpEXIMismatch
• gfpUPIMismatch
• gfpLossOfFrameAlignment
• etexCritical
• etexMajor
• etexMinor
• etexWarning
• slotMismatch
• ofaGainControlNotSupported
• ofaManualGainSetOutOfRange
• ofaLossOfGainControl
• ofaGainLockNotSupported
• ofaGainLockActivated
• usageMismatch
• equipmentFanMalFunction
• equipmentCoolingFailure
• mSPNotSupported
• protectionArchitectureMismatch
• inappropriateRequestCodeReceived
• illegalRequestCodeReceived
• selectorControlMismatch
• unstableAPSSignalling
• osaChannelSpacingNotSupported
• osaNoInputSignal
• osaReceiverOverload
• osaInputChannelPowerLow
• osaUnexpectedSignal
• osaChannelMissing
• bitEncodingSchemeNotSupported
• proprietaryInformationMissing
• iApsIllegalRequest
• LayerResourceFailed
• ServerFailure
• laserBiasCurrentOutOfRange
• transceiverTemperatureOutOfRange
• transceiverSupplyVoltageOutOfRange
• transceiverResponseFail
• moduleResponseFail
• lapsFrameMismatch
• sequenceIndicatorMismatch
• digitalDiagnosticsNotSupported
• lossOfInternalTiming
Index
Lifetime expectancy exceeded alarm 126 Missing bus clock alarm 128
Location attribute Modify Copied Rule parameter
for operation contexts 68 of Copy operation 112
Lockout of protection pending alarm 126 Module Response Fail alarm 128
LogFullAction attribute Monitored Attributes attribute
for operation contexts 72 for alarm objects 83
Logging of alarms 16 Monitored By attribute
Logical_Operator_And attribute for operation contexts 78
for alarm objects 83 MSP IF degraded alarm 129
Loop back active alarm 126 MSP IF failure alarm 129
Loss of alignment alarm 126
Loss of channel counting alarm 126
Loss of frame alarm 126
N
Loss of multiframe alarm 126 Name attribute
Loss of optical signal alarm 126 for alarm rules 98
Loss of pointer alarm 126 for operation contexts 68, 71
Loss of reference source alarm 127 NE software error: <error-specific text> alarm 129
Loss of signal alarm 127 New Domain Name parameter
Loss of timing alarm 127 of Copy operation 112
Low battery threshold alarm 127 New Rule Name parameter
Low cable pressure alarm 127 of Copy operation 112
Low fuel alarm 127 Nick Name attribute
Low humidity alarm 128 for alarm rules 91
Low temperature alarm 128 Notification Identifier attribute
Low water alarm 128 for alarm objects 83
M O
MAIL Account attribute OC Name attribute
for operation contexts 68 for alarm objects 83
Main Object attribute 24 Occurs n time rule 23
Main power input supply failed alarm 128 Occurs N Time Rule attribute
Major Problem Occurrences attribute for alarm rules 91
for alarm objects 88 Occurs rule 23
Managed Object attribute Occurs Rule attribute
for alarm objects 83 for alarm rules 91
value for alarm escalation alarms 106 OFA gain control not supported alarm 129
value for alarm log alarms 105 OFA gain lock active alarm 129
value for bridge LAN interfaces alarms 104 OFA gain lock not supported alarm 129
value for bridge leased lines interfaces OFA loss of power matching reference alarm 129
OFA manual gain set out of reference alarm 129
alarms 104
Open the alarm log 57
value for disk storage alarms 105
Opening
value for SNMP entity alarms 103
Managing Director attribute Real Time View window 44
Operation context
for operation contexts 68, 80
Managing Director parameter creating 35
deleting 40
of Register operation 107
managing 36
Managing operation contexts 36
Max Log Size attribute performing operations 40
for operation contexts 72 Operation Context Description attribute
Minor Problem Occurrences attribute for operation contexts 69, 72
Operation Context List window 39
for alarm objects 88
opening 46
Mir Component Version attribute
Operation Context View window 45
for operation contexts 72
add operation context 46
U
UB power too high alarm 135
UB power too low alarm 135
UB1 power missing alarm 135
UB2 power missing alarm 135
Unit initialising alarm 135
Unit main type mismatch alarm 135
Unit missing alarm 136
Unit sub type mismatch alarm 136
Unit temperature too high alarm 136
Unit temperature too low alarm 136
Unknown LMIP probable cause <ID> alarm 136
User Identifier attribute
for alarm objects 85
User Text attribute
for alarm objects 85
User-defined 1 alarm 136
V
Vcc (+5V) voltage too high alarm 136
Vcc (+5V) voltage too low alarm 136
VCO (oscillator) failure alarm 136
VCXO (oscillator) failure alarm 136
Vee (-5V) voltage too high alarm 137
Vee (-5V) voltage too low alarm 137
Ventilations system failure alarm 137
W
Warning Problem Occurrences attribute
for alarm objects 89