Professional Documents
Culture Documents
Solids - CATIA V5
Solids - CATIA V5
Solids - CATIA V5
Solids - CATIA V5
CATIA V5
PREV NEXT
⏮ ⏭
6. 3D Wireframe Geometry and Surfaces 8. Featured Object Classes
🔎
7 Solids
The following sections will show how the different types of solids can be
created.
Find answers on the fly, or master something new. Subscribe today. See pricing options.
https://learning.oreilly.com/library/view/catia-v5/9780071800020/ch07.html 1/12
9/12/2020 7. Solids - CATIA V5
Sub PART.Update
Find answers on the fly, or master something new. Subscribe today. See pricing options.
https://learning.oreilly.com/library/view/catia-v5/9780071800020/ch07.html 2/12
9/12/2020 7. Solids - CATIA V5
A solid may have a positive or negative definition. Solids with the same
definition are added, and bodies associated with different solid definitions
are subtracted (see Section 3.3). For example, if a pad and a pocket are
created in a body, the intersection of the pad and pocket is omitted.
The following two sections introduce the methods for creating sketch-
based solids and include two case studies.
The methods for creating a sketch-based volume body are assigned with
the ShapeFactory class (Section 8.199). An overview of these methods is
provided in Table 7.3.
https://learning.oreilly.com/library/view/catia-v5/9780071800020/ch07.html 3/12
9/12/2020 7. Solids - CATIA V5
Find answers on the fly, or master something new. Subscribe today. See pricing options.
https://learning.oreilly.com/library/view/catia-v5/9780071800020/ch07.html 4/12
9/12/2020 7. Solids - CATIA V5
The following two sections describe the methods for creating surface-
based solids, and two case studies are presented.
The methods for creating surface-based solids are assigned with the
ShapeFactory class (Section 8.199). An overview of these methods is
given in Table 7.5.
https://learning.oreilly.com/library/view/catia-v5/9780071800020/ch07.html 5/12
9/12/2020 7. Solids - CATIA V5
Find answers on the fly, or master something new. Subscribe today. See pricing options.
https://learning.oreilly.com/library/view/catia-v5/9780071800020/ch07.html 6/12
9/12/2020 7. Solids - CATIA V5
Find answers on the fly, or master something new. Subscribe today. See pricing options.
https://learning.oreilly.com/library/view/catia-v5/9780071800020/ch07.html 7/12
9/12/2020 7. Solids - CATIA V5
In an open, active CATPart, the PartBody contains the pad “Pad.1” and the
geometrical set “Plane” with a plane “Plane.1.” The pad should is mirrored
around the plane. The result will appear under the object “Pad.1” in the
tree (Figure 7.6).
Find answers on the fly, or master something new. Subscribe today. See pricing options.
https://learning.oreilly.com/library/view/catia-v5/9780071800020/ch07.html 8/12
9/12/2020 7. Solids - CATIA V5
In an open, active CATPart, the PartBody contains the pad “Pad.1” and the
hole “Hole.1.” The hole is to be replicated along the positive and negative
X and Y directions with a distance of 20 mm. The result is a pattern with 3
× 3 holes, with the original hole located in the center of the pattern
(Figure 7.7).
7.5 Operations
Find answers on the fly, or master something new. Subscribe today. See pricing options.
TABLE 7.10 Surface Operations on Solids
https://learning.oreilly.com/library/view/catia-v5/9780071800020/ch07.html 9/12
9/12/2020 7. Solids - CATIA V5
The following two sections describe the methods for creating operations
on solids, and two case studies are presented.
The methods for creating operations on solids are assigned with the
ShapeFactory class (Section 8.199). An overview of the methods is given
in Table 7.12.
To reflect this in a macro, the method should create the operation with an
empty reference as a parameter to pass. Then set the methods of the
created object, even the edges or faces (see Example 7.8). The declaration
of an empty reference is explained in Section 3.5.3.
The pad “Pad.1” exists in the PartBody in an open, active CATPart. The
pad is based on the sketch “Sketch.1.” The pad is filleted on all four
Find answers on the fly,vertical
or master something
edges with radius new.
of 10 mm (Figure 7.8). Subscribe today. See pricing options.
https://learning.oreilly.com/library/view/catia-v5/9780071800020/ch07.html 10/12
9/12/2020 7. Solids - CATIA V5
In an open, active CATPart, the pad “Pad.1” exists in the PartBody with a
circular contour. The pad’s outer surface is drafted at 15°. The draft
direction is (0, 0, 1). The edge at the top of the pad must not be
dimensionally changed. The result is shown in Figure 7.9.
Find answers on the fly, or master something new. Subscribe today. See pricing options.
https://learning.oreilly.com/library/view/catia-v5/9780071800020/ch07.html 11/12
9/12/2020 7. Solids - CATIA V5
Find answers on the fly, or master something new. Subscribe today. See pricing options.
https://learning.oreilly.com/library/view/catia-v5/9780071800020/ch07.html 12/12