Fall arrest equipment such as full body harnesses and lanyards must now be used instead of safety belts for working at heights on ships. Body belts can only be used for working at heights up to 6.75 meters. Anyone using a full body harness must receive education on its proper use, consisting of at least 3 hours of classroom and practical instruction. This new requirement aims to improve safety standards for seafarers working at heights.
Fall arrest equipment such as full body harnesses and lanyards must now be used instead of safety belts for working at heights on ships. Body belts can only be used for working at heights up to 6.75 meters. Anyone using a full body harness must receive education on its proper use, consisting of at least 3 hours of classroom and practical instruction. This new requirement aims to improve safety standards for seafarers working at heights.
Fall arrest equipment such as full body harnesses and lanyards must now be used instead of safety belts for working at heights on ships. Body belts can only be used for working at heights up to 6.75 meters. Anyone using a full body harness must receive education on its proper use, consisting of at least 3 hours of classroom and practical instruction. This new requirement aims to improve safety standards for seafarers working at heights.
(equipment to be used for fall arrest) is changed to Fall arrest equipment (※1). (Amendment of Regulation for Labour Safety and Health of Seafarers) (※1) Fall arrest equipment conforming to Standard for Fall arrest equipment (Notice of Ministry of Health, Labour and Welfare No.11 of January, 2019) are full harness type(single suspension) and body belt type(single suspension). Body belt type(U-shaped suspension) is not included in fall arrest equip ment. 2.As a general rule, Full harness ) Shoulder type (※2 strap Chest should be used as fall arrest equipment. Hook strap (※2) Body belt Body belt type (single suspension) can also be used Lanyard Thigh in cases of work at a high place that is 6.75 meters strap or less above floor surface or sea level. 3.Seafarers using a full harness type must receive Education In case where it is mandatory to use a fall arrest equipment in a work(※3), seafarers engaged in work using a full harness type must receive “Education”(※4). (※3)①Work at high place, ②Work over ship side, ③Fishery work, ④Work inside hold(excluding in cases where fall preventive measures such as installing protective nets, protective sheets, etc. are taken), ⑤Deicing work (※4) Education is held by the Association for Promoting Safety and Sanitation for Seafarers or as in-company Seminar, etc. and consists of classroom lectures and practical skills in 3 hours or more. If you have any questions, please ask the nearest District Transport Bureau.
Ministry of Iand, Infrastructure, Transport and Tourism (MLIT)
A Comparison Study Between Advance Transfer Technique and Advance Transfer Mathematical Model Using Bulk Carrier Ship - Cross-Track Distance Validation by Percentage Change and Mann Whitney U Test PDF