Accessories

LEVER PAD LOCK SIZE

The ALFA ball valve has its operation lever classified into To Lock the ALFA ball valve, employ the
d
three types by valve nominal diameter, with an operating pad lock having a size as specified
torque taken into account. It is made of the metal which H L
below.
will neither be molten nor deformed even if over heated
in a fire or the like.
LOCK

Table of Dimensions
Shape B0011. B0012 B0111. B0112 Reverence
Pad Lock Size
(material) Nominal Nominal Valve Nominal (Nominal Pad lock
Key Hole
diameter diameter Diameter diameter alpha
D L H number)
15 ~ 50 mm .....
Carbon Steel 15 mm 6 4.5 16 18 1000~25m/m
20~25 mm 6 5 19 15 1000~30m/m
65 ~ 80 mm 80 ~ 100 mm
Ductile Iron 40~50 mm 8 6 27 24 1000~40m/m
65~100 mm 10 6 30 27 1000~45m/m
Steel Pipe 100 ~ 200 mm 125 ~ 250 mm
Ductile Iron 125~200 mm 10 6 30 27 1000~45m/m

WORM GEAR OPERATING

The gear operator, which is of completely enclosed
type, may be employed in outdoor piping without any
problem. A combination of worm with sector gear
permits the control to be operated lightly. Valve in size
250 mm full bore and 300 mm Reduced bore is supplied
with worm gear operator as standard. The gear operator 11 T
is optionally mountable onto full bore type 65 mm thru
10
200 mm and reduced Bore Type 80 mm thru 250 mm.
W

14
Table of Materials
15
No Part Material
1 Valve Body - 16
2 Valve Stem - 9 J
3 Grand Flange -
8
4 York Ductile Iron
7
5 Connector Carbon Steel
13
6 Gear Housing Cast Iron
6
7 Key Carbon Steel
8 Cover Cast Iron 12
9 Cover Bolt Carbon Steel
5
10 Hand Wheel STEEL
11 Adjustment Screw Carbon Steel 4
12 O-ring NBR 3
13 Worm Wheel Ductile Iron
2
14 Worm Carbon Steel
15 Shaft Carbon Steel 1
16 O-ring NBR

Nominal Diameter of Applicable Valve Type of Enclosed Dimensions

Full Bore Type Reduced Bore Type Gear Operator T J W
65-80-100 80-100-125 HG-00 180 55 300
125-150 150-200 HD-0 240 85 450
200-250 250-300 HG-1 350 116 600

31