This document outlines a problem to design a patch antenna for Bluetooth frequencies between 2.402 to 2.480 GHz using polypropylene (PP) material with a dielectric constant of 2.2 and thickness of 3 mm. It instructs the reader to find the input impedance at the edge of the material, calculate the position for a 50 ohm impedance match, and determine the width for a 50 ohm microstrip line. The reader is then instructed to physically make the antenna.
This document outlines a problem to design a patch antenna for Bluetooth frequencies between 2.402 to 2.480 GHz using polypropylene (PP) material with a dielectric constant of 2.2 and thickness of 3 mm. It instructs the reader to find the input impedance at the edge of the material, calculate the position for a 50 ohm impedance match, and determine the width for a 50 ohm microstrip line. The reader is then instructed to physically make the antenna.
This document outlines a problem to design a patch antenna for Bluetooth frequencies between 2.402 to 2.480 GHz using polypropylene (PP) material with a dielectric constant of 2.2 and thickness of 3 mm. It instructs the reader to find the input impedance at the edge of the material, calculate the position for a 50 ohm impedance match, and determine the width for a 50 ohm microstrip line. The reader is then instructed to physically make the antenna.
2) Design a patch antenna for Bluetooth, (frequency 2.402 to 2.480 GHz). Use PP material with Er=2.2 and a thickness of 3 mm. Find the input impedance at the edge and calculate the position for 50 Ohm impedance. Find the W for a 50 Ohm microstrip. Make the antenna.