Professional Documents
Culture Documents
TDS of GP 1001 PDF
TDS of GP 1001 PDF
GREENPOL 1001
GP 1001 is a very stable ammonium salt of polycarboxylic polymer for use as an
PAGE NUMBER: 1 of 1 efficient pigments dispersant in high PVC pigment formulations, such as paper
No. : GP/TDS/1001 coatings and emulsion paints. GP 1001 can be used as the primary dispersant or can
Issued date : August 18, 2017
be used in conjunction with phosphate dispersants. GP 1001 is applicable over a
wide range of formulation, climatic and application conditions.
Rev. no : 2
Rev. date : - PERFORMANCES
SUGGESTED USES
GP 1001 is useful as a dispersant in gloss paints formulations and has low foaming
characteristic. GP 1001 gives stable dispersions with most reactive pigments such as
zinc oxide.
Recommended dosage levels are 0.15 – 0.5% dry on dry pigments when used alone, or
0.05% - 0.1% (dry / dry) when used as a secondary dispersant. Normally GP 1001 should
be added to the water phase prior to the addition of the undispersed pigments
SPECIFICATIONS
Solids Content, % by wt : 30 ± 1
Viscosity at 30oC, cPs : Max.500
(Brookfield LVT No.2, 60 RPM)
pH value : 9.0 – 10.0
Appearance : AmberClear Liquid
STANDARD PACKING
GP 1001 is packed 200 kgs net in open head metal drums packed inside with 2 liners
of HDPE.
The information contained herein is correct to the best of our knowledge. The recommendations or suggestions
contained in this bulletin are made without guarantee or representation as to results. We suggest that you evaluate
these recommendations and suggestions in your own laboratory prior to use. Our responsibility for claims arising from
breach of warranty, negligence or otherwise is limited to the purchase price of the material.