Professional Documents
Culture Documents
Densing (CVE163 Lab 2)
Densing (CVE163 Lab 2)
Densing (CVE163 Lab 2)
Activity # 4
Analysis of Doubly Reinforced Beam
Direction: Analyze each problem carefully. Using NSCP 2010 Code, calculate and present
your solution neatly and clearly. Support your solution with drawings when necessary.
Problem 1: A reinforced concrete beam has a width of 350 mm and over all depth of 650 mm.
Tension reinforcement consists of 8 – 28 mm Ø arranged in two layers while
compression reinforcement contains 4 – 25 mm Ø. Clear cover is 35 mm for both tension
and compression bars. The beam will be subjected to a maximum service dead load
moment of 250 kN – m. What is the service live load moment for this beam? Assume f’
= 24 MPa and fy = (300 + x) MPa
Problem 2: A reinforced concrete beam has a width of 300 mm and effective depth of 520
mm. Tension reinforcement consists of 6 – 28 mm Ø while compression reinforcement
contains 2 – 25 mm Ø. Steel covering (measured from the centroid of the bar) is 60 mm
for both compression and tension bars. Assume f’ c = 28 MPa and f y = (275 + x) MPa.
Determine the following:
Activity # 4
Analysis of Doubly Reinforced Beam
Direction: Analyze each problem carefully. Using NSCP 2010 Code, calculate and present
your solution neatly and clearly. Support your solution with drawings when necessary.
Problem 1: A reinforced concrete beam has a width of 350 mm and over all depth of 650 mm.
Tension reinforcement consists of 8 – 28 mm Ø arranged in two layers while
compression reinforcement contains 4 – 25 mm Ø. Clear cover is 35 mm for both tension
and compression bars. The beam will be subjected to a maximum service dead load
moment of 250 kN – m. What is the service live load moment for this beam? Assume f’
= 24 MPa and fy = (300 + x) MPa
Problem 2: A reinforced concrete beam has a width of 300 mm and effective depth of 520
mm. Tension reinforcement consists of 6 – 28 mm Ø while compression reinforcement
contains 2 – 25 mm Ø. Steel covering (measured from the centroid of the bar) is 60 mm
for both compression and tension bars. Assume f’ c = 28 MPa and f y = (275 + x) MPa.
Determine the following:
Problem 3: A reinforced concrete beam has a width of 375 mm and effective depth of 650
mm. Tension reinforcement consists of 6 – 28 mm Ø while compression reinforcement
contains 2 – 25 mm Ø. Steel covering (measured from the centroid of the bar) is 60 mm
Guide questions: for both compression and tension bars. Assume f’ c = 28 MPa and f y = (300 + x) MPa.
Determine the following:
a. Determine the critical strength (5 pts.)
b. Shear strength of a.boltDepth of compression block
(5 pts.)
b. Ultimate
c. Bearing at bolt holes (5 pts.) moment capacity of the beam
d. Tension on gross area of tensionand
c. Minimum maximum
plate (5 pts.) tension steel area permitted by the code
e. Rapture on net area of tension
Problem plate (5 pts.)
4: A reinforced concrete beam has an effective depth of 600 mm and subjected to a
f. Block shear on gusset
total plate (5 pts.)
factored moment of 1,500 kN – m including its own weight. Steel covering
(measured from the centroid of bar) is 75 mm for both compression and tension bars.
Assume f’c = 30 MPa and fy = (300 + x) MPa. Determine the following:
Republic of the Philippines
Mindanao State University - Iligan Institute of Technology
College of Engineering& Technology
Department of Civil Engineering
Tibanga, 9200 Iligan City, P.O. Box No.5644 Tel. Nos. (063) 221-4050 Loc.130
Direct line (063) 2351 Homepage: http://www.msuiit.edu.ph/coe
Activity # 4
Analysis of Doubly Reinforced Beam
Direction: Analyze each problem carefully. Using NSCP 2010 Code, calculate and present
your solution neatly and clearly. Support your solution with drawings when necessary.
Problem 1: A reinforced concrete beam has a width of 350 mm and over all depth of 650 mm.
Tension reinforcement consists of 8 – 28 mm Ø arranged in two layers while
compression reinforcement contains 4 – 25 mm Ø. Clear cover is 35 mm for both tension
and compression bars. The beam will be subjected to a maximum service dead load
moment of 250 kN – m. What is the service live load moment for this beam? Assume f’
= 24 MPa and fy = (300 + x) MPa
Problem 2: A reinforced concrete beam has a width of 300 mm and effective depth of 520
mm. Tension reinforcement consists of 6 – 28 mm Ø while compression reinforcement
contains 2 – 25 mm Ø. Steel covering (measured from the centroid of the bar) is 60 mm
for both compression and tension bars. Assume f’ c = 28 MPa and f y = (275 + x) MPa.
Determine the following:
Problem 3: A reinforced concrete beam has a width of 375 mm and effective depth of 650
mm. Tension reinforcement consists of 6 – 28 mm Ø while compression reinforcement
contains 2 – 25 mm Ø. Steel covering (measured from the centroid of the bar) is 60 mm
Make a flowchart forforthis activity.
both Use your
compression andcreativity so that
tension bars. all essential
Assume equations
f’ c = 28 MPa andcanf ybe
= (300 + x) MPa.
Determine the following:
included and fitted in one whole sheet of paper. I will require you to encode your work. (10
pts.)
a. Depth of compression block
b. Ultimate moment capacity of the beam
c. Minimum and maximum tension steel area permitted by the code
Problem 4: A reinforced concrete beam has an effective depth of 600 mm and subjected to a
total factored moment of 1,500 kN – m including its own weight. Steel covering
(measured from the centroid of bar) is 75 mm for both compression and tension bars.
Assume f’c = 30 MPa and fy = (300 + x) MPa. Determine the following:
Republic of the Philippines
Mindanao State University - Iligan Institute of Technology
College of Engineering& Technology
Department of Civil Engineering
Tibanga, 9200 Iligan City, P.O. Box No.5644 Tel. Nos. (063) 221-4050 Loc.130
Direct line (063) 2351 Homepage: http://www.msuiit.edu.ph/coe
Activity # 4
Analysis of Doubly Reinforced Beam
Direction: Analyze each problem carefully. Using NSCP 2010 Code, calculate and present
your solution neatly and clearly. Support your solution with drawings when necessary.
Problem 1: A reinforced concrete beam has a width of 350 mm and over all depth of 650 mm.
Tension reinforcement consists of 8 – 28 mm Ø arranged in two layers while
compression reinforcement contains 4 – 25 mm Ø. Clear cover is 35 mm for both tension
and compression bars. The beam will be subjected to a maximum service dead load
moment of 250 kN – m. What is the service live load moment for this beam? Assume f’
= 24 MPa and fy = (300 + x) MPa
Problem 2: A reinforced concrete beam has a width of 300 mm and effective depth of 520
mm. Tension reinforcement consists of 6 – 28 mm Ø while compression reinforcement
contains 2 – 25 mm Ø. Steel covering (measured from the centroid of the bar) is 60 mm
for both compression and tension bars. Assume f’ c = 28 MPa and f y = (275 + x) MPa.
Determine the following:
Problem 3: A reinforced concrete beam has a width of 375 mm and effective depth of 650
mm. Tension reinforcement consists of 6 – 28 mm Ø while compression reinforcement
contains 2 – 25 mm Ø. Steel covering (measured from the centroid of the bar) is 60 mm
for both compression and tension bars. Assume f’ c = 28 MPa and f y = (300 + x) MPa.
Determine the following:
Problem 4: A reinforced concrete beam has an effective depth of 600 mm and subjected to a
total factored moment of 1,500 kN – m including its own weight. Steel covering
(measured from the centroid of bar) is 75 mm for both compression and tension bars.
Assume f’c = 30 MPa and fy = (300 + x) MPa. Determine the following:
Paste the screenshots of your solution below. Arrange them in an orderly manner
Republic of the Philippines
Mindanao State University - Iligan Institute of Technology
College of Engineering& Technology
Department of Civil Engineering
Tibanga, 9200 Iligan City, P.O. Box No.5644 Tel. Nos. (063) 221-4050 Loc.130
Direct line (063) 2351 Homepage: http://www.msuiit.edu.ph/coe
Activity # 4
Analysis of Doubly Reinforced Beam
Direction: Analyze each problem carefully. Using NSCP 2010 Code, calculate and present
your solution neatly and clearly. Support your solution with drawings when necessary.
Problem 1: A reinforced concrete beam has a width of 350 mm and over all depth of 650 mm.
Tension reinforcement consists of 8 – 28 mm Ø arranged in two layers while
compression reinforcement contains 4 – 25 mm Ø. Clear cover is 35 mm for both tension
and compression bars. The beam will be subjected to a maximum service dead load
moment of 250 kN – m. What is the service live load moment for this beam? Assume f’
= 24 MPa and fy = (300 + x) MPa
Problem 2: A reinforced concrete beam has a width of 300 mm and effective depth of 520
mm. Tension reinforcement consists of 6 – 28 mm Ø while compression reinforcement
contains 2 – 25 mm Ø. Steel covering (measured from the centroid of the bar) is 60 mm
for both compression and tension bars. Assume f’ c = 28 MPa and f y = (275 + x) MPa.
Determine the following:
Problem 3: A reinforced concrete beam has a width of 375 mm and effective depth of 650
mm. Tension reinforcement consists of 6 – 28 mm Ø while compression reinforcement
contains 2 – 25 mm Ø. Steel covering (measured from the centroid of the bar) is 60 mm
for both compression and tension bars. Assume f’ c = 28 MPa and f y = (300 + x) MPa.
Determine the following:
Problem 4: A reinforced concrete beam has an effective depth of 600 mm and subjected to a
total factored moment of 1,500 kN – m including its own weight. Steel covering
(measured from the centroid of bar) is 75 mm for both compression and tension bars.
Assume f’c = 30 MPa and fy = (300 + x) MPa. Determine the following:
Republic of the Philippines
Mindanao State University - Iligan Institute of Technology
College of Engineering& Technology
Department of Civil Engineering
Tibanga, 9200 Iligan City, P.O. Box No.5644 Tel. Nos. (063) 221-4050 Loc.130
Direct line (063) 2351 Homepage: http://www.msuiit.edu.ph/coe
Activity # 4
Analysis of Doubly Reinforced Beam
Direction: Analyze each problem carefully. Using NSCP 2010 Code, calculate and present
your solution neatly and clearly. Support your solution with drawings when necessary.
Problem 1: A reinforced concrete beam has a width of 350 mm and over all depth of 650 mm.
Tension reinforcement consists of 8 – 28 mm Ø arranged in two layers while
compression reinforcement contains 4 – 25 mm Ø. Clear cover is 35 mm for both tension
and compression bars. The beam will be subjected to a maximum service dead load
moment of 250 kN – m. What is the service live load moment for this beam? Assume f’
= 24 MPa and fy = (300 + x) MPa
Problem 2: A reinforced concrete beam has a width of 300 mm and effective depth of 520
mm. Tension reinforcement consists of 6 – 28 mm Ø while compression reinforcement
contains 2 – 25 mm Ø. Steel covering (measured from the centroid of the bar) is 60 mm
for both compression and tension bars. Assume f’ c = 28 MPa and f y = (275 + x) MPa.
Determine the following:
Problem 3: A reinforced concrete beam has a width of 375 mm and effective depth of 650
mm. Tension reinforcement consists of 6 – 28 mm Ø while compression reinforcement
contains 2 – 25 mm Ø. Steel covering (measured from the centroid of the bar) is 60 mm
for both compression and tension bars. Assume f’ c = 28 MPa and f y = (300 + x) MPa.
Determine the following:
Problem 4: A reinforced concrete beam has an effective depth of 600 mm and subjected to a
total factored moment of 1,500 kN – m including its own weight. Steel covering
(measured from the centroid of bar) is 75 mm for both compression and tension bars.
Assume f’c = 30 MPa and fy = (300 + x) MPa. Determine the following:
Republic of the Philippines
Mindanao State University - Iligan Institute of Technology
College of Engineering& Technology
Department of Civil Engineering
Tibanga, 9200 Iligan City, P.O. Box No.5644 Tel. Nos. (063) 221-4050 Loc.130
Direct line (063) 2351 Homepage: http://www.msuiit.edu.ph/coe
Activity # 4
Analysis of Doubly Reinforced Beam
Direction: Analyze each problem carefully. Using NSCP 2010 Code, calculate and present
your solution neatly and clearly. Support your solution with drawings when necessary.
Problem 1: A reinforced concrete beam has a width of 350 mm and over all depth of 650 mm.
Tension reinforcement consists of 8 – 28 mm Ø arranged in two layers while
compression reinforcement contains 4 – 25 mm Ø. Clear cover is 35 mm for both tension
and compression bars. The beam will be subjected to a maximum service dead load
moment of 250 kN – m. What is the service live load moment for this beam? Assume f’
= 24 MPa and fy = (300 + x) MPa
Problem 2: A reinforced concrete beam has a width of 300 mm and effective depth of 520
mm. Tension reinforcement consists of 6 – 28 mm Ø while compression reinforcement
contains 2 – 25 mm Ø. Steel covering (measured from the centroid of the bar) is 60 mm
for both compression and tension bars. Assume f’ c = 28 MPa and f y = (275 + x) MPa.
Determine the following:
Problem 3: A reinforced concrete beam has a width of 375 mm and effective depth of 650
mm. Tension reinforcement consists of 6 – 28 mm Ø while compression reinforcement
contains 2 – 25 mm Ø. Steel covering (measured from the centroid of the bar) is 60 mm
for both compression and tension bars. Assume f’ c = 28 MPa and f y = (300 + x) MPa.
Determine the following:
Problem 4: A reinforced concrete beam has an effective depth of 600 mm and subjected to a
total factored moment of 1,500 kN – m including its own weight. Steel covering
(measured from the centroid of bar) is 75 mm for both compression and tension bars.
Assume f’c = 30 MPa and fy = (300 + x) MPa. Determine the following:
Republic of the Philippines
Mindanao State University - Iligan Institute of Technology
College of Engineering& Technology
Department of Civil Engineering
Tibanga, 9200 Iligan City, P.O. Box No.5644 Tel. Nos. (063) 221-4050 Loc.130
Direct line (063) 2351 Homepage: http://www.msuiit.edu.ph/coe
Activity # 4
Analysis of Doubly Reinforced Beam
Direction: Analyze each problem carefully. Using NSCP 2010 Code, calculate and present
your solution neatly and clearly. Support your solution with drawings when necessary.
Problem 1: A reinforced concrete beam has a width of 350 mm and over all depth of 650 mm.
Tension reinforcement consists of 8 – 28 mm Ø arranged in two layers while
compression reinforcement contains 4 – 25 mm Ø. Clear cover is 35 mm for both tension
and compression bars. The beam will be subjected to a maximum service dead load
moment of 250 kN – m. What is the service live load moment for this beam? Assume f’
= 24 MPa and fy = (300 + x) MPa
Problem 2: A reinforced concrete beam has a width of 300 mm and effective depth of 520
mm. Tension reinforcement consists of 6 – 28 mm Ø while compression reinforcement
contains 2 – 25 mm Ø. Steel covering (measured from the centroid of the bar) is 60 mm
for both compression and tension bars. Assume f’ c = 28 MPa and f y = (275 + x) MPa.
Determine the following:
Problem 3: A reinforced concrete beam has a width of 375 mm and effective depth of 650
mm. Tension reinforcement consists of 6 – 28 mm Ø while compression reinforcement
contains 2 – 25 mm Ø. Steel covering (measured from the centroid of the bar) is 60 mm
for both compression and tension bars. Assume f’ c = 28 MPa and f y = (300 + x) MPa.
Determine the following:
Problem 4: A reinforced concrete beam has an effective depth of 600 mm and subjected to a
total factored moment of 1,500 kN – m including its own weight. Steel covering
(measured from the centroid of bar) is 75 mm for both compression and tension bars.
Assume f’c = 30 MPa and fy = (300 + x) MPa. Determine the following:
Republic of the Philippines
Mindanao State University - Iligan Institute of Technology
College of Engineering& Technology
Department of Civil Engineering
Tibanga, 9200 Iligan City, P.O. Box No.5644 Tel. Nos. (063) 221-4050 Loc.130
Direct line (063) 2351 Homepage: http://www.msuiit.edu.ph/coe
Activity # 4
Analysis of Doubly Reinforced Beam
Direction: Analyze each problem carefully. Using NSCP 2010 Code, calculate and present
your solution neatly and clearly. Support your solution with drawings when necessary.
Problem 1: A reinforced concrete beam has a width of 350 mm and over all depth of 650 mm.
Tension reinforcement consists of 8 – 28 mm Ø arranged in two layers while
compression reinforcement contains 4 – 25 mm Ø. Clear cover is 35 mm for both tension
and compression bars. The beam will be subjected to a maximum service dead load
moment of 250 kN – m. What is the service live load moment for this beam? Assume f’
= 24 MPa and fy = (300 + x) MPa
Problem 2: A reinforced concrete beam has a width of 300 mm and effective depth of 520
mm. Tension reinforcement consists of 6 – 28 mm Ø while compression reinforcement
contains 2 – 25 mm Ø. Steel covering (measured from the centroid of the bar) is 60 mm
for both compression and tension bars. Assume f’ c = 28 MPa and f y = (275 + x) MPa.
Determine the following:
Problem 3: A reinforced concrete beam has a width of 375 mm and effective depth of 650
mm. Tension reinforcement consists of 6 – 28 mm Ø while compression reinforcement
contains 2 – 25 mm Ø. Steel covering (measured from the centroid of the bar) is 60 mm
for both compression and tension bars. Assume f’ c = 28 MPa and f y = (300 + x) MPa.
Determine the following:
Problem 4: A reinforced concrete beam has an effective depth of 600 mm and subjected to a
total factored moment of 1,500 kN – m including its own weight. Steel covering
(measured from the centroid of bar) is 75 mm for both compression and tension bars.
Assume f’c = 30 MPa and fy = (300 + x) MPa. Determine the following: