Professional Documents
Culture Documents
Densing (CVE 163 Lab 6)
Densing (CVE 163 Lab 6)
Densing (CVE 163 Lab 6)
Activity # 4
Analysis of Doubly Reinforced Beam
Direction: Analyze each problem carefully. Using NSCP 2010 Code, calculate and present
your solution neatly and clearly. Support your solution with drawings when necessary.
Problem 1: A reinforced concrete beam has a width of 350 mm and over all depth of 650 mm.
Tension reinforcement consists of 8 – 28 mm Ø arranged in two layers while
compression reinforcement contains 4 – 25 mm Ø. Clear cover is 35 mm for both tension
and compression bars. The beam will be subjected to a maximum service dead load
moment of 250 kN – m. What is the service live load moment for this beam? Assume f’
= 24 MPa and fy = (300 + x) MPa
Problem 2: A reinforced concrete beam has a width of 300 mm and effective depth of 520
mm. Tension reinforcement consists of 6 – 28 mm Ø while compression reinforcement
contains 2 – 25 mm Ø. Steel covering (measured from the centroid of the bar) is 60 mm
for both compression and tension bars. Assume f’ c = 28 MPa and f y = (275 + x) MPa.
Determine the following:
Activity # 4
Analysis of Doubly Reinforced Beam
Direction: Analyze each problem carefully. Using NSCP 2010 Code, calculate and present
your solution neatly and clearly. Support your solution with drawings when necessary.
Problem 1: A reinforced concrete beam has a width of 350 mm and over all depth of 650 mm.
Tension reinforcement consists of 8 – 28 mm Ø arranged in two layers while
compression reinforcement contains 4 – 25 mm Ø. Clear cover is 35 mm for both tension
and compression bars. The beam will be subjected to a maximum service dead load
moment of 250 kN – m. What is the service live load moment for this beam? Assume f’
= 24 MPa and fy = (300 + x) MPa
Problem 2: A reinforced concrete beam has a width of 300 mm and effective depth of 520
mm. Tension reinforcement consists of 6 – 28 mm Ø while compression reinforcement
contains 2 – 25 mm Ø. Steel covering (measured from the centroid of the bar) is 60 mm
for both compression and tension bars. Assume f’ c = 28 MPa and f y = (275 + x) MPa.
Determine the following:
Problem 3: A reinforced concrete beam has a width of 375 mm and effective depth of 650
mm. Tension reinforcement consists of 6 – 28 mm Ø while compression reinforcement
contains 2 – 25 mm Ø. Steel covering (measured from the centroid of the bar) is 60 mm
= 30 kips and L = 60for
kips. Using
both Case 2 forand
compression U, tension
determine whether
bars. the f’member
Assume is adequate
c = 28 MPa and f y using
= (300 + x) MPa.
Determine the following:
LRFD and ASD. Hint: Convert all units in SI. (20 pts.)
Activity # 4
Analysis of Doubly Reinforced Beam
Direction: Analyze each problem carefully. Using NSCP 2010 Code, calculate and present
your solution neatly and clearly. Support your solution with drawings when necessary.
Problem 1: A reinforced concrete beam has a width of 350 mm and over all depth of 650 mm.
Tension reinforcement consists of 8 – 28 mm Ø arranged in two layers while
compression reinforcement contains 4 – 25 mm Ø. Clear cover is 35 mm for both tension
and compression bars. The beam will be subjected to a maximum service dead load
moment of 250 kN – m. What is the service live load moment for this beam? Assume f’
= 24 MPa and fy = (300 + x) MPa
Problem 2: A reinforced concrete beam has a width of 300 mm and effective depth of 520
mm. Tension reinforcement consists of 6 – 28 mm Ø while compression reinforcement
contains 2 – 25 mm Ø. Steel covering (measured from the centroid of the bar) is 60 mm
for both compression and tension bars. Assume f’ c = 28 MPa and f y = (275 + x) MPa.
Determine the following:
Problem 3: A reinforced concrete beam has a width of 375 mm and effective depth of 650
mm. Tension reinforcement consists of 6 – 28 mm Ø while compression reinforcement
contains 2 – 25 mm Ø. Steel covering (measured from the centroid of the bar) is 60 mm
Problem 2: Computefortheboth
LRFD design tensile
compression and strength and ASD
tension bars. allowable
Assume tensile
f’ c = 28 MPaofand
the f12
y =mm
(300 + x) MPa.
Determine the following:
plate. Diameter of bolts is 20 mm. All steel are A36 with F u = 400 MPa and F y = 250 MPa.
Consider 5 modes of failure. (30 pts.)
a. Depth of compression block
b. Ultimate moment capacity of the beam Summary of Answers
c. Minimum and maximum tension steel area permitted by the code
Problem 4: A reinforced concrete beam has an effective depth of 600 mm and subjected to a
total factored moment of 1,500 kN – m including its own weight. Steel covering
(measured from the centroid of bar) is 75 mm for both compression and tension bars.
Assume f’c = 30 MPa and fy = (300 + x) MPa. Determine the following:
Republic of the Philippines
Mindanao State University - Iligan Institute of Technology
College of Engineering& Technology
Department of Civil Engineering
Tibanga, 9200 Iligan City, P.O. Box No.5644 Tel. Nos. (063) 221-4050 Loc.130
Direct line (063) 2351 Homepage: http://www.msuiit.edu.ph/coe
Activity # 4
Analysis of Doubly Reinforced Beam
Direction: Analyze each problem carefully. Using NSCP 2010 Code, calculate and present
your solution neatly and clearly. Support your solution with drawings when necessary.
Problem 1: A reinforced concrete beam has a width of 350 mm and over all depth of 650 mm.
Tension reinforcement consists of 8 – 28 mm Ø arranged in two layers while
compression reinforcement contains 4 – 25 mm Ø. Clear cover is 35 mm for both tension
and compression bars. The beam will be subjected to a maximum service dead load
moment of 250 kN – m. What is the service live load moment for this beam? Assume f’
= 24 MPa and fy = (300 + x) MPa
Problem 2: A reinforced concrete beam has a width of 300 mm and effective depth of 520
mm. Tension reinforcement consists of 6 – 28 mm Ø while compression reinforcement
contains 2 – 25 mm Ø. Steel covering (measured from the centroid of the bar) is 60 mm
for both compression and tension bars. Assume f’ c = 28 MPa and f y = (275 + x) MPa.
Determine the following:
Problem 3: A reinforced concrete beam has a width of 375 mm and effective depth of 650
mm. Tension reinforcement consists of 6 – 28 mm Ø while compression reinforcement
contains 2 – 25 mm Ø. Steel covering (measured from the centroid of the bar) is 60 mm
for both compression and tension bars. Assume f’ c = 28 MPa and f y = (300 + x) MPa.
Determine the following:
Problem 4: A reinforced concrete beam has an effective depth of 600 mm and subjected to a
Problem 3: Create flowcharts in analyzing
total factored momenttheofabove
1,500problems
kN – m (20including
pts.) its own weight. Steel covering
(measured from the centroid of bar) is 75 mm for both compression and tension bars.
Assume f’c = 30 MPa and fy = (300 + x) MPa. Determine the following:
Republic of the Philippines
Mindanao State University - Iligan Institute of Technology
College of Engineering& Technology
Department of Civil Engineering
Tibanga, 9200 Iligan City, P.O. Box No.5644 Tel. Nos. (063) 221-4050 Loc.130
Direct line (063) 2351 Homepage: http://www.msuiit.edu.ph/coe
Activity # 4
Analysis of Doubly Reinforced Beam
Direction: Analyze each problem carefully. Using NSCP 2010 Code, calculate and present
your solution neatly and clearly. Support your solution with drawings when necessary.
Problem 1: A reinforced concrete beam has a width of 350 mm and over all depth of 650 mm.
Tension reinforcement consists of 8 – 28 mm Ø arranged in two layers while
compression reinforcement contains 4 – 25 mm Ø. Clear cover is 35 mm for both tension
and compression bars. The beam will be subjected to a maximum service dead load
moment of 250 kN – m. What is the service live load moment for this beam? Assume f’
= 24 MPa and fy = (300 + x) MPa
Problem 2: A reinforced concrete beam has a width of 300 mm and effective depth of 520
mm. Tension reinforcement consists of 6 – 28 mm Ø while compression reinforcement
contains 2 – 25 mm Ø. Steel covering (measured from the centroid of the bar) is 60 mm
for both compression and tension bars. Assume f’ c = 28 MPa and f y = (275 + x) MPa.
Determine the following:
Problem 3: A reinforced concrete beam has a width of 375 mm and effective depth of 650
mm. Tension reinforcement consists of 6 – 28 mm Ø while compression reinforcement
contains 2 – 25 mm Ø. Steel covering (measured from the centroid of the bar) is 60 mm
for both compression and tension bars. Assume f’ c = 28 MPa and f y = (300 + x) MPa.
Determine the following:
Problem 4: A reinforced concrete beam has an effective depth of 600 mm and subjected to a
total factored moment of 1,500 kN – m including its own weight. Steel covering
(measured from the centroid of bar) is 75 mm for both compression and tension bars.
Assume f’c = 30 MPa and fy = (300 + x) MPa. Determine the following:
Republic of the Philippines
Mindanao State University - Iligan Institute of Technology
College of Engineering& Technology
Department of Civil Engineering
Tibanga, 9200 Iligan City, P.O. Box No.5644 Tel. Nos. (063) 221-4050 Loc.130
Direct line (063) 2351 Homepage: http://www.msuiit.edu.ph/coe
Activity # 4
Analysis of Doubly Reinforced Beam
Direction: Analyze each problem carefully. Using NSCP 2010 Code, calculate and present
your solution neatly and clearly. Support your solution with drawings when necessary.
Problem 1: A reinforced concrete beam has a width of 350 mm and over all depth of 650 mm.
Tension reinforcement consists of 8 – 28 mm Ø arranged in two layers while
compression reinforcement contains 4 – 25 mm Ø. Clear cover is 35 mm for both tension
and compression bars. The beam will be subjected to a maximum service dead load
moment of 250 kN – m. What is the service live load moment for this beam? Assume f’
= 24 MPa and fy = (300 + x) MPa
Problem 2: A reinforced concrete beam has a width of 300 mm and effective depth of 520
mm. Tension reinforcement consists of 6 – 28 mm Ø while compression reinforcement
contains 2 – 25 mm Ø. Steel covering (measured from the centroid of the bar) is 60 mm
for both compression and tension bars. Assume f’ c = 28 MPa and f y = (275 + x) MPa.
Determine the following:
Problem 3: A reinforced concrete beam has a width of 375 mm and effective depth of 650
mm. Tension reinforcement consists of 6 – 28 mm Ø while compression reinforcement
contains 2 – 25 mm Ø. Steel covering (measured from the centroid of the bar) is 60 mm
for both compression and tension bars. Assume f’ c = 28 MPa and f y = (300 + x) MPa.
Determine the following:
Problem 4: A reinforced concrete beam has an effective depth of 600 mm and subjected to a
total factored moment of 1,500 kN – m including its own weight. Steel covering
(measured from the centroid of bar) is 75 mm for both compression and tension bars.
Assume f’c = 30 MPa and fy = (300 + x) MPa. Determine the following:
Republic of the Philippines
Mindanao State University - Iligan Institute of Technology
College of Engineering& Technology
Department of Civil Engineering
Tibanga, 9200 Iligan City, P.O. Box No.5644 Tel. Nos. (063) 221-4050 Loc.130
Direct line (063) 2351 Homepage: http://www.msuiit.edu.ph/coe
Activity # 4
Analysis of Doubly Reinforced Beam
Direction: Analyze each problem carefully. Using NSCP 2010 Code, calculate and present
your solution neatly and clearly. Support your solution with drawings when necessary.
Problem 1: A reinforced concrete beam has a width of 350 mm and over all depth of 650 mm.
Tension reinforcement consists of 8 – 28 mm Ø arranged in two layers while
compression reinforcement contains 4 – 25 mm Ø. Clear cover is 35 mm for both tension
and compression bars. The beam will be subjected to a maximum service dead load
moment of 250 kN – m. What is the service live load moment for this beam? Assume f’
= 24 MPa and fy = (300 + x) MPa
Problem 2: A reinforced concrete beam has a width of 300 mm and effective depth of 520
mm. Tension reinforcement consists of 6 – 28 mm Ø while compression reinforcement
contains 2 – 25 mm Ø. Steel covering (measured from the centroid of the bar) is 60 mm
for both compression and tension bars. Assume f’ c = 28 MPa and f y = (275 + x) MPa.
Determine the following:
Problem 3: A reinforced concrete beam has a width of 375 mm and effective depth of 650
mm. Tension reinforcement consists of 6 – 28 mm Ø while compression reinforcement
contains 2 – 25 mm Ø. Steel covering (measured from the centroid of the bar) is 60 mm
for both compression and tension bars. Assume f’ c = 28 MPa and f y = (300 + x) MPa.
Determine the following:
Problem 4: A reinforced concrete beam has an effective depth of 600 mm and subjected to a
total factored moment of 1,500 kN – m including its own weight. Steel covering
(measured from the centroid of bar) is 75 mm for both compression and tension bars.
Assume f’c = 30 MPa and fy = (300 + x) MPa. Determine the following:
Republic of the Philippines
Mindanao State University - Iligan Institute of Technology
College of Engineering& Technology
Department of Civil Engineering
Tibanga, 9200 Iligan City, P.O. Box No.5644 Tel. Nos. (063) 221-4050 Loc.130
Direct line (063) 2351 Homepage: http://www.msuiit.edu.ph/coe
Activity # 4
Analysis of Doubly Reinforced Beam
Direction: Analyze each problem carefully. Using NSCP 2010 Code, calculate and present
your solution neatly and clearly. Support your solution with drawings when necessary.
Problem 1: A reinforced concrete beam has a width of 350 mm and over all depth of 650 mm.
Tension reinforcement consists of 8 – 28 mm Ø arranged in two layers while
compression reinforcement contains 4 – 25 mm Ø. Clear cover is 35 mm for both tension
and compression bars. The beam will be subjected to a maximum service dead load
moment of 250 kN – m. What is the service live load moment for this beam? Assume f’
= 24 MPa and fy = (300 + x) MPa
Problem 2: A reinforced concrete beam has a width of 300 mm and effective depth of 520
mm. Tension reinforcement consists of 6 – 28 mm Ø while compression reinforcement
contains 2 – 25 mm Ø. Steel covering (measured from the centroid of the bar) is 60 mm
for both compression and tension bars. Assume f’ c = 28 MPa and f y = (275 + x) MPa.
Determine the following:
Problem 3: A reinforced concrete beam has a width of 375 mm and effective depth of 650
mm. Tension reinforcement consists of 6 – 28 mm Ø while compression reinforcement
contains 2 – 25 mm Ø. Steel covering (measured from the centroid of the bar) is 60 mm
for both compression and tension bars. Assume f’ c = 28 MPa and f y = (300 + x) MPa.
Determine the following:
Problem 4: A reinforced concrete beam has an effective depth of 600 mm and subjected to a
total factored moment of 1,500 kN – m including its own weight. Steel covering
(measured from the centroid of bar) is 75 mm for both compression and tension bars.
Determine the specified parameters.
Assume f’c = 30 MPa and fy = (300 + x) MPa. Determine the following:
Determine;
Gross width of plate, w :