Professional Documents
Culture Documents
Densing (CVE163 Lab 4)
Densing (CVE163 Lab 4)
Activity # 4
Analysis of Doubly Reinforced Beam
Direction: Analyze each problem carefully. Using NSCP 2010 Code, calculate and present
your solution neatly and clearly. Support your solution with drawings when necessary.
Problem 1: A reinforced concrete beam has a width of 350 mm and over all depth of 650 mm.
Tension reinforcement consists of 8 – 28 mm Ø arranged in two layers while
compression reinforcement contains 4 – 25 mm Ø. Clear cover is 35 mm for both tension
and compression bars. The beam will be subjected to a maximum service dead load
moment of 250 kN – m. What is the service live load moment for this beam? Assume f’
= 24 MPa and fy = (300 + x) MPa
Problem 2: A reinforced concrete beam has a width of 300 mm and effective depth of 520
mm. Tension reinforcement consists of 6 – 28 mm Ø while compression reinforcement
contains 2 – 25 mm Ø. Steel covering (measured from the centroid of the bar) is 60 mm
for both compression and tension bars. Assume f’ c = 28 MPa and fy = (275 + x) MPa.
Determine the following:
Activity # 4
Analysis of Doubly Reinforced Beam
Direction: Analyze each problem carefully. Using NSCP 2010 Code, calculate and present
your solution neatly and clearly. Support your solution with drawings when necessary.
Problem 1: A reinforced concrete beam has a width of 350 mm and over all depth of 650 mm.
Tension reinforcement consists of 8 – 28 mm Ø arranged in two layers while
compression reinforcement contains 4 – 25 mm Ø. Clear cover is 35 mm for both tension
and compression bars. The beam will be subjected to a maximum service dead load
moment of 250 kN – m. What is the service live load moment for this beam? Assume f’
= 24 MPa and fy = (300 + x) MPa
Problem 2: A reinforced concrete beam has a width of 300 mm and effective depth of 520
mm. Tension reinforcement consists of 6 – 28 mm Ø while compression reinforcement
contains 2 – 25 mm Ø. Steel covering (measured from the centroid of the bar) is 60 mm
for both compression and tension bars. Assume f’ c = 28 MPa and fy = (275 + x) MPa.
Determine the following:
Problem 3: A reinforced concrete beam has a width of 375 mm and effective depth of 650
mm. Tension reinforcement consists of 6 – 28 mm Ø while compression reinforcement
contains 2 – 25 mm Ø. Steel covering (measured from the centroid of the bar) is 60 mm
nominal shear strength
forofboth
180kNand the plate
compression and thickness is 12Assume
tension bars. mm. Considering bothand
f’ c = 28 MPa LRFD
fy =and
(300 + x) MPa.
Determine
ASD methods, determine the following:
the maximum value of P using the following:
a. method
a. Elastic analysis Depth of
(15compression
pts.) block
b. Instantaneousb.center
Ultimate moment
of rotation capacity
method of the
in MS beam
Excel (15 pts.)
c. Minimum and maximum tension steel area permitted by the code
Activity # 4
Analysis of Doubly Reinforced Beam
Direction: Analyze each problem carefully. Using NSCP 2010 Code, calculate and present
your solution neatly and clearly. Support your solution with drawings when necessary.
Problem 1: A reinforced concrete beam has a width of 350 mm and over all depth of 650 mm.
Tension reinforcement consists of 8 – 28 mm Ø arranged in two layers while
compression reinforcement contains 4 – 25 mm Ø. Clear cover is 35 mm for both tension
and compression bars. The beam will be subjected to a maximum service dead load
moment of 250 kN – m. What is the service live load moment for this beam? Assume f’
= 24 MPa and fy = (300 + x) MPa
Problem 2: A reinforced concrete beam has a width of 300 mm and effective depth of 520
mm. Tension reinforcement consists of 6 – 28 mm Ø while compression reinforcement
contains 2 – 25 mm Ø. Steel covering (measured from the centroid of the bar) is 60 mm
for both compression and tension bars. Assume f’ c = 28 MPa and fy = (275 + x) MPa.
Determine the following:
Problem 3: A reinforced concrete beam has a width of 375 mm and effective depth of 650
mm. Tension reinforcement consists of 6 – 28 mm Ø while compression reinforcement
contains 2 – 25 mm Ø. Steel covering (measured from the centroid of the bar) is 60 mm
for both compression and tension bars. Assume f’ c = 28 MPa and fy = (300 + x) MPa.
Determine the following:
Problem 4: A reinforced concrete beam has an effective depth of 600 mm and subjected to a
Problem 2:Create a total
flowchart in analyzing
factored moment bolts subject
of 1,500 kNto–eccentric shearing
m including using weight.
its own the above
Steel covering
methods (10 pts.) (measured from the centroid of bar) is 75 mm for both compression and tension bars.
Assume f’c = 30 MPa and fy = (300 + x) MPa. Determine the following:
Republic of the Philippines
Mindanao State University - Iligan Institute of Technology
College of Engineering& Technology
Department of Civil Engineering
Tibanga, 9200 Iligan City, P.O. Box No.5644 Tel. Nos. (063) 221-4050 Loc.130
Direct line (063) 2351 Homepage: http://www.msuiit.edu.ph/coe
Activity # 4
Analysis of Doubly Reinforced Beam
Direction: Analyze each problem carefully. Using NSCP 2010 Code, calculate and present
your solution neatly and clearly. Support your solution with drawings when necessary.
Problem 1: A reinforced concrete beam has a width of 350 mm and over all depth of 650 mm.
Tension reinforcement consists of 8 – 28 mm Ø arranged in two layers while
compression reinforcement contains 4 – 25 mm Ø. Clear cover is 35 mm for both tension
and compression bars. The beam will be subjected to a maximum service dead load
moment of 250 kN – m. What is the service live load moment for this beam? Assume f’
= 24 MPa and fy = (300 + x) MPa
Problem 2: A reinforced concrete beam has a width of 300 mm and effective depth of 520
mm. Tension reinforcement consists of 6 – 28 mm Ø while compression reinforcement
contains 2 – 25 mm Ø. Steel covering (measured from the centroid of the bar) is 60 mm
for both compression and tension bars. Assume f’ c = 28 MPa and fy = (275 + x) MPa.
Determine the following:
Problem 3: A reinforced concrete beam has a width of 375 mm and effective depth of 650
mm. Tension reinforcement consists of 6 – 28 mm Ø while compression reinforcement
contains 2 – 25 mm Ø. Steel covering (measured from the centroid of the bar) is 60 mm
for both compression and tension bars. Assume f’ c = 28 MPa and fy = (300 + x) MPa.
Determine the following:
Problem 4: A reinforced concrete beam has an effective depth of 600 mm and subjected to a
total factored moment of 1,500 kN – m including its own weight. Steel covering
(measured from the centroid of bar) is 75 mm for both compression and tension bars.
Assume f’c = 30 MPa and fy = (300 + x) MPa. Determine the following:
Paste the screenshots of your solution below. Arrange them in an orderly manner
Republic of the Philippines
Mindanao State University - Iligan Institute of Technology
College of Engineering& Technology
Department of Civil Engineering
Tibanga, 9200 Iligan City, P.O. Box No.5644 Tel. Nos. (063) 221-4050 Loc.130
Direct line (063) 2351 Homepage: http://www.msuiit.edu.ph/coe
Activity # 4
Analysis of Doubly Reinforced Beam
Direction: Analyze each problem carefully. Using NSCP 2010 Code, calculate and present
your solution neatly and clearly. Support your solution with drawings when necessary.
Problem 1: A reinforced concrete beam has a width of 350 mm and over all depth of 650 mm.
Tension reinforcement consists of 8 – 28 mm Ø arranged in two layers while
compression reinforcement contains 4 – 25 mm Ø. Clear cover is 35 mm for both tension
and compression bars. The beam will be subjected to a maximum service dead load
moment of 250 kN – m. What is the service live load moment for this beam? Assume f’
= 24 MPa and fy = (300 + x) MPa
Problem 2: A reinforced concrete beam has a width of 300 mm and effective depth of 520
mm. Tension reinforcement consists of 6 – 28 mm Ø while compression reinforcement
contains 2 – 25 mm Ø. Steel covering (measured from the centroid of the bar) is 60 mm
for both compression and tension bars. Assume f’ c = 28 MPa and fy = (275 + x) MPa.
Determine the following:
Problem 3: A reinforced concrete beam has a width of 375 mm and effective depth of 650
mm. Tension reinforcement consists of 6 – 28 mm Ø while compression reinforcement
contains 2 – 25 mm Ø. Steel covering (measured from the centroid of the bar) is 60 mm
for both compression and tension bars. Assume f’ c = 28 MPa and fy = (300 + x) MPa.
Determine the following:
Problem 4: A reinforced concrete beam has an effective depth of 600 mm and subjected to a
total factored moment of 1,500 kN – m including its own weight. Steel covering
(measured from the centroid of bar) is 75 mm for both compression and tension bars.
Assume f’c = 30 MPa and fy = (300 + x) MPa. Determine the following:
Republic of the Philippines
Mindanao State University - Iligan Institute of Technology
College of Engineering& Technology
Department of Civil Engineering
Tibanga, 9200 Iligan City, P.O. Box No.5644 Tel. Nos. (063) 221-4050 Loc.130
Direct line (063) 2351 Homepage: http://www.msuiit.edu.ph/coe
Activity # 4
Analysis of Doubly Reinforced Beam
Direction: Analyze each problem carefully. Using NSCP 2010 Code, calculate and present
your solution neatly and clearly. Support your solution with drawings when necessary.
Problem 1: A reinforced concrete beam has a width of 350 mm and over all depth of 650 mm.
Tension reinforcement consists of 8 – 28 mm Ø arranged in two layers while
compression reinforcement contains 4 – 25 mm Ø. Clear cover is 35 mm for both tension
and compression bars. The beam will be subjected to a maximum service dead load
moment of 250 kN – m. What is the service live load moment for this beam? Assume f’
= 24 MPa and fy = (300 + x) MPa
Problem 2: A reinforced concrete beam has a width of 300 mm and effective depth of 520
mm. Tension reinforcement consists of 6 – 28 mm Ø while compression reinforcement
contains 2 – 25 mm Ø. Steel covering (measured from the centroid of the bar) is 60 mm
for both compression and tension bars. Assume f’ c = 28 MPa and fy = (275 + x) MPa.
Determine the following:
Problem 3: A reinforced concrete beam has a width of 375 mm and effective depth of 650
mm. Tension reinforcement consists of 6 – 28 mm Ø while compression reinforcement
contains 2 – 25 mm Ø. Steel covering (measured from the centroid of the bar) is 60 mm
for both compression and tension bars. Assume f’ c = 28 MPa and fy = (300 + x) MPa.
Determine the following:
Problem 4: A reinforced concrete beam has an effective depth of 600 mm and subjected to a
total factored moment of 1,500 kN – m including its own weight. Steel covering
(measured from the centroid of bar) is 75 mm for both compression and tension bars.
Assume f’c = 30 MPa and fy = (300 + x) MPa. Determine the following:
Republic of the Philippines
Mindanao State University - Iligan Institute of Technology
College of Engineering& Technology
Department of Civil Engineering
Tibanga, 9200 Iligan City, P.O. Box No.5644 Tel. Nos. (063) 221-4050 Loc.130
Direct line (063) 2351 Homepage: http://www.msuiit.edu.ph/coe
Activity # 4
Analysis of Doubly Reinforced Beam
Direction: Analyze each problem carefully. Using NSCP 2010 Code, calculate and present
your solution neatly and clearly. Support your solution with drawings when necessary.
Problem 1: A reinforced concrete beam has a width of 350 mm and over all depth of 650 mm.
Tension reinforcement consists of 8 – 28 mm Ø arranged in two layers while
compression reinforcement contains 4 – 25 mm Ø. Clear cover is 35 mm for both tension
and compression bars. The beam will be subjected to a maximum service dead load
moment of 250 kN – m. What is the service live load moment for this beam? Assume f’
= 24 MPa and fy = (300 + x) MPa
Problem 2: A reinforced concrete beam has a width of 300 mm and effective depth of 520
mm. Tension reinforcement consists of 6 – 28 mm Ø while compression reinforcement
contains 2 – 25 mm Ø. Steel covering (measured from the centroid of the bar) is 60 mm
for both compression and tension bars. Assume f’ c = 28 MPa and fy = (275 + x) MPa.
Determine the following:
Problem 3: A reinforced concrete beam has a width of 375 mm and effective depth of 650
mm. Tension reinforcement consists of 6 – 28 mm Ø while compression reinforcement
contains 2 – 25 mm Ø. Steel covering (measured from the centroid of the bar) is 60 mm
for both compression and tension bars. Assume f’ c = 28 MPa and fy = (300 + x) MPa.
Determine the following:
Problem 4: A reinforced concrete beam has an effective depth of 600 mm and subjected to a
total factored moment of 1,500 kN – m including its own weight. Steel covering
(measured from the centroid of bar) is 75 mm for both compression and tension bars.
Assume f’c = 30 MPa and fy = (300 + x) MPa. Determine the following: