Professional Documents
Culture Documents
V20 User Manual
V20 User Manual
Reader
User Manual
Connection Diagrams Descriptions
Pin Description
1 +12VDC Power to Reader
2 -12VDC Power to Reader
3 -12VDC from Output 0 on V20
4 -12VDC from Output 1 on V20
5 +12VDC to Key Switch
6 +12VDC from Key Switch
7 Not Connected
8 Not Connected
9 Ground connected to terminal 18 on V20
Pin Description
1 +12VDC to Maglock
2 -12VDC to Maglock
3 -12VDC to Monitoring Switch
4 -12VDC from Monitoring Switch
5 +12VDC to Lights
6 -12VDC to Lights
7 Not Connected
8 Not Connected
9 Not Connected
Pin Description
1 +12VDC to Maglock
2 -12VDC to Maglock
3 -12VDC to Monitoring Switch
4 -12VDC from Monitoring Switch
5 Normal Open Contact to Camera
6 Normal Open Contact to Camera
7 Not Connected
8 Not Connected
9 Not Connected
Set-up of the V20 finger print Reader
To enter system set-up press the system key “C” then enter your user ID code and present
your finger to the scanner.
1. Setup of the GRAB Function to Low Easy and set the static function.
¾ Enter the setup mode
2. Relay Setup
¾ Enter the setup mode
System Menu
Setup of Alarms
Network Setup
In case the finger print reader does not work use the key switch override on the right hand
side of the finger print reader insert the key and turn to the opposite direction than the
current position to override the doors.