Professional Documents
Culture Documents
SAP Router Installation
SAP Router Installation
The first thing you need to do, is to send a customer message to SAPSupport
(component XX-SER-NET-OSS-NEW) and tell them to register thehostname and IP of
your new SAProuter.
You have to register it with a official IP address (no internal IPs allowed), but it’s
allowed to use NAT in the firewall/router.
After you’ve received a confirmation from SAP that your SAProuter has been
registered, you are ready to configure your SAProuter.
Note: You will be asked for a PIN code. Just pick your own 4 numbers, butyou’ll have
to use the same PIN every time you’re asked to enter one.
4. Then you have to follow the guide and request the certificate
fromhttp://service.sap.com/tcs -> Download Area -> SAProuter Certificate
———————————————— Installation on UNIX ———————————————-
3. (Optional) If you want to start the SAProuter on the same computer used for an
SAPinstance, insert the following line into file /usr/sap//SYS/exe/run/startsap:
#
# Start saprouter
SRDIR=/usr/sap/saprouter
$SRDIR/saprouter -r -R $SRDIR/saprouttab \
Fi
Insert the lines before the commands to start the SAP instance. Normally the
SAProuter runs on a different computer. If this is so, this step is omittedand you start
the SAProuter as described in Starting the SAProuter.