Professional Documents
Culture Documents
Puente de Diodos y Reguladores de Tensión Integrados
Puente de Diodos y Reguladores de Tensión Integrados
BRIDGE RECTIFIERS
FEATURES KBP
! UL Recognized File # E469616
J
! Diffused Junction A
! Low Forward Voltage Drop
! High Current Capability KBP
B Dim Min Max
! High Reliability
A 14.22 15.24
! High Surge Current Capability + ~ ~ -
B 10.60 11.68
! Ideal for Printed Circuit Boards
C 15.2 —
I D 3.40 4.20
C
E 3.60 4.10
MECHANICAL DATA
G 1.27 —
! Case: Molded Plastic H H 0.70 0.90
! MIL-STD-202, Method 208 I 12.7 —
! Polarity: As Marked on Body E J 4.2 x 45° Typical
! Weight: 1.7 grams (approx.) G All Dimensions in mm
! Mounting Position: Any D
! Marking: Type Number
! Lead Free: For RoHS / Lead Free Version,
Note: 1. Leads maintained at ambient temperature at a distance of 9.5mm from the case.
2. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C.
3. Thermal resistance junction to ambient mounted on PC board with 12mm2 copper pad.
http://www.trr-jx.com
L78
Datasheet
Features
• Output current up to 1.5 A
• Output voltages of 5; 6; 8; 8.5; 9; 12; 15; 18; 24 V
• Thermal overload protection
TO-220 TO-220FP
• Short circuit protection
• Output transition SOA protection
• 2 % output voltage tolerance (A version)
DPAK D²PAK
• Guaranteed in extended temperature range (A version)
Description
The L78 series of three-terminal positive regulators is available in TO-220,
TO-220FP, D²PAK and DPAK packages and several fixed output voltages, making it
useful in a wide range of applications.
These regulators can provide local on-card regulation, eliminating the distribution
problems associated with single point regulation. Each type embeds internal current
limiting, thermal shut-down and safe area protection, making it essentially
indestructible. If adequate heat sinking is provided, they can deliver over 1 A output
current. Although designed primarily as fixed voltage regulators, these devices can
be used with external components to obtain adjustable voltage and currents.
L78
1 Diagram
GAMG220920161000MT
2 Pin configuration
TO-220 TO-220FP
D²PAK DPAK
GAMG220920161001MT
GAMG220920161002MT
3 Maximum ratings
for VO= 5 to 18 V 35
VI DC input voltage V
for VO= 20, 24 V 40
Note: Absolute maximum ratings are those values beyond which damage to the device may occur. Functional
operation under these condition is not implied.
GAMG220920161003MT
5 Electrical characteristics
VI = 8 to 12 V 10 50 mV
∆VO (1) Line regulation
VI = 8 to 12 V, TJ = 25 °C 2 25 mV
VI = 7.3 to 20 V, TJ = 25 °C 7 50 mV
IO = 5 mA to 1 A 25 100
IO = 250 to 750 mA 8 50
TJ = 25 °C 4.3 6 mA
Iq Quiescent current
6 mA
VI = 8 to 23 V, IO = 500 mA 0.8 mA
IO = 5 mA to 1 A 0.5 mA
Vd Dropout voltage IO = 1 A, TJ = 25 °C 2 V
1. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating
effects must be taken into account separately. Pulse testing with low duty cycle is used.
VI = 9 to 13 V 11 60 mV
∆VO (1) Line regulation
VI = 9 to 13 V, TJ = 25 °C 3 30 mV
VI = 8.3 to 21 V, TJ = 25 °C 9 60 mV
IO = 5 mA to 1 A 25 100
IO = 250 to 750 mA 10 50
TJ = 25° C 4.3 6 mA
Iq Quiescent current
6 mA
VI = 9 to 24 V, IO = 500 mA 0.8 mA
IO = 5 mA to 1 A 0.5 mA
Vd Dropout voltage IO = 1 A, TJ = 25 °C 2 V
1. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating
effects must be taken into account separately. Pulse testing with low duty cycle is used.
VI = 11 to 17 V 15 80 mV
∆VO (1) Line regulation
VI = 11 to 17 V, TJ = 25 °C 5 40 mV
VI = 10.4 to 23 V, TJ = 25 °C 12 80 mV
IO = 5 mA to 1 A 25 100
IO = 250 to 750 mA 10 50
TJ = 25 °C 4.3 6 mA
Iq Quiescent current
6 mA
VI = 11 to 23 V, IO = 500 mA 0.8 mA
IO = 5 mA to 1 A 0.5 mA
Vd Dropout voltage IO = 1 A, TJ = 25 °C 2 V
1. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating
effects must be taken into account separately. Pulse testing with low duty cycle is used.
VI = 11 to 17 V 15 90 mV
∆VO (1) Line regulation
VI = 11 to 17 V, TJ = 25 °C 5 45 mV
VI = 11.4 to 23 V, TJ = 25 °C 12 90 mV
IO = 5 mA to 1 A 25 100
IO = 250 to 750 mA 10 50
TJ = 25 °C 4.3 6 mA
Iq Quiescent current
6 mA
VI = 11 to 25 V, IO = 500 mA 0.8 mA
IO = 5 mA to 1 A 0.5 mA
Vd Dropout voltage IO = 1 A, TJ = 25 °C 2 V
1. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating
effects must be taken into account separately. Pulse testing with low duty cycle is used.
VI = 16 to 12 V 16 120 mV
∆VO (1) Line regulation
VI = 16 to 12 V, TJ = 25 °C 6 60 mV
VI = 14.5 to 27 V, TJ = 25 °C 13 120 mV
IO = 5 mA to 1 A 25 100
IO = 250 to 750 mA 10 50
TJ = 25 °C 4.4 6 mA
Iq Quiescent current
6 mA
VI = 15 to 30 V, IO = 500 mA 0.8 mA
IO = 5 mA to 1 A 0.5 mA
Vd Dropout voltage IO = 1 A, TJ = 25 °C 2 V
1. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating
effects must be taken into account separately. Pulse testing with low duty cycle is used.
VI = 20 to 26 V 16 150 mV
∆VO (1) Line regulation
VI = 20 to 26 V, TJ = 25 °C 6 75 mV
VI = 17.5 to 30 V, TJ = 25 °C 13 150 mV
IO = 5 mA to 1 A 25 100
IO = 250 to 750 mA 10 50
TJ = 25 °C 4.4 6 mA
Iq Quiescent current
6 mA
VI = 17.5 to 30 V, IO = 500 mA 0.8 mA
IO = 5 mA to 1 A 0.5 mA
Vd Dropout voltage IO = 1 A, TJ = 25 °C 2 V
1. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating
effects must be taken into account separately. Pulse testing with low duty cycle is used.
VO Output voltage IO = 1 A, VI = 37 to 38 V, TJ = 25 °C 23 24 25 V
VI = 30 to 36 V 35 200 mV
∆VO (1) Line regulation
VI = 30 to 36 V, TJ = 25 °C 14 120 mV
VI = 26.7 to 38 V, TJ = 25 °C 31 240 mV
IO = 5 mA to 1 A 25 100
IO = 250 to 750 mA 10 50
TJ = 25 °C 4.6 6 mA
Iq Quiescent current
6 mA
VI = 27.3 to 38 V, IO = 500 mA 0.8 mA
IO = 5 mA to 1 A 0.5 mA
Vd Dropout voltage IO = 1 A, TJ = 25 °C 2 V
1. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating
effects must be taken into account separately. Pulse testing with low duty cycle is used.
DESCRIPTION
TO-220 TO-220FP
The L7900 series of three-terminal negative
regulators is available in TO-220, TO-220FP,
TO-3 and D2PAK packages and several fixed
output voltages, making it useful in a wide range of
applications. These regulators can provide local
on-card regulation, eliminating the distribution
problems associated with single point regulation;
furthermore, having the same voltage option as
the L7800 positive standard series, they are
particularly suited for split power supplies. In
D2PAK TO-3
addition, the -5.2V is also available for ECL
system. If adequate heat sinking is provided, they
can deliver over 1.5A output current.
Although designed primarily as fixed voltage
regulators, these devices can be used with
external components to obtain adjustable voltages
and currents.
SCHEMATIC DIAGRAM
THERMAL DATA
TO-220 TO-220FP
D2PAK TO-3
2/16
L7900 SERIES
ORDERING CODES
TEST CIRCUIT
3/16
L7900 SERIES
4/16
L7900 SERIES
5/16
L7900 SERIES
6/16
L7900 SERIES
7/16
L7900 SERIES
APPLICATIONS INFORMATION
NOTE:
1. To specify an output voltage, substitute voltage value for "XX".
2. Required for stability. For value given, capacitor must be solid tantalum. If aluminium electrolytics are used, at least ten times value should
be selected. C1 is required if regulator is located an appreciable distance from power supply filter.
3. To improve transient response. If large capacitors are used, a high current diode from input to output (1N4001 or similar) should be intro-
duced to protect the device from momentary input short circuit.
8/16
L7900 SERIES
R1 + R2 Vxx
VO = Vxx > 3Id
R2 R2
9/16
L7900 SERIES
Optional dropping resistor to reduce the power dissipated in the boost transistor.
10/16
LM117/217
LM317
DESCRIPTION
The LM117/LM217/LM317 are monolithic
integrated circuit in TO-220, ISOWATT220, TO-3 TO-3 D2PAK
and D2PAK packages intended for use as
positive adjustable voltage regulators.
They are designed to supply more than 1.5A of
load current with an output voltage adjustable
over a 1.2 to 37V range.
The nominal output voltage is selected by means
of only a resistive divider, making the device
exceptionally easy to use and eliminating the
stocking of many fixed regulators.
TO-220 ISOWATT220
THERMAL DATA
Symbol Parameter TO-3 TO-220 ISOWATT220 D2PAK Unit
o
R thj- ca se Thermal Resistance Junction-case Max 4 3 4 3 C/W
o
R thj- amb Thermal Resistance Junction-ambient Max 35 50 60 62.5 C/W
TO-220 ISOWATT220
D2PAK TO-3
2
Type TO-3 TO-220 ISOWATT220 D PAK
LM117 LM117K
LM217 LM217K LM217T LM217D2T
LM317 LM317K LM317T LM317P LM317D2T
SCHEMATIC DIAGRAM
2/11
LM117/217/317
ELECTRICAL CHARACTERISTICS (Vi - Vo = 5 V, Io = 500 mA, IMAX = 1.5A and PMAX = 20W, unless
otherwise specified)
Symbol Parameter Test Conditions LM117/LM217 LM317 Unit
Min. Typ. Max. Min. Typ. Max.
∆V o Line Regulation Vi - Vo = 3 to 40 V T j = 25 o C 0.01 0.02 0.01 0.04 %/V
0.02 0.05 0.02 0.07 %/V
o
∆V o Load Regulation Vo ≤ 5V T j = 25 C 5 15 5 25 mV
Io = 10 mA to IMAX 20 50 20 70 mV
o
Vo ≥ 5V T j = 25 C 0.1 0.3 0.1 0.5 %
Io = 10 mA to IMAX 0.3 1 0.3 1.5 %
I ADJ Adjustment Pin Current 50 100 50 100 µA
∆I ADJ Adjustment Pin Current Vi - Vo = 2.5 to 40 V 0.2 5 0.2 5 µA
Io = 10 mA to IMAX
V REF Reference Voltage Vi - Vo = 2.5 to 40 V 1.2 1.25 1.3 1.2 1.25 1.3 V
(between pin 3 and pin Io = 10 mA to IMAX
1) PD ≤ PMAX
∆ Vo Output Voltage 1 1 %
Vo Temperature Stability
I o (m in) Minimum Load Current Vi - Vo = 40 V 3.5 5 3.5 10 mA
I o (max ) Maximum Load Vi - Vo ≤ 15 V 1.5 2.2 1.5 2.2 A
Current PD < PMAX
Vi - Vo = 40 V 0.4 0.4 A
PD < PMAX
o
Tj = 25 C
eN Output Noise Voltage B = 10Hz to 10KHz 0.003 0.003 %
(percentance of VO) Tj = 25 oC
SVR Supply Voltage Tj = 25 oC C ADJ =0 65 65 dB
Rejection (*) f = 120 Hz 66 80 66 80 dB
C ADJ =10µF
3/11
LM137/LM237
LM337
THREE-TERMINAL ADJUSTABLE
NEGATIVE VOLTAGE REGULATORS
.. Vref
1.5A GUARANTEED OUTPUT CURRENT
.. PERATURE
RIPPLE REJECTION : 77dB
STANDARD 3-LEAD TRANSISTOR PACK-
. AGES
EXCELLENT THERMAL REGULATION:
TO-3
. 0.002%/V
50ppm/°C TEMPERATURE COEFFICIENT
DESCRIPTION
The LM137 series are adjustable 3-terminal nega-
tive voltage regulators capable of supplying in ex-
cess - 1.5A over a -1.2 to - 37V output voltage range.
They are exceptionally easy to use and require only TO-220
two external resistors to set the output voltage. Fur-
ther, both line and load regulation are better than
standard fixed regulators. Also, LM137 regulators
are supplied in standard transistor packages which
are easily mounted and handled. In addition to
higher performance than fixed regulators, the
LM137 series offer full overload protection available
only in integrated circuits. Included on the chip are
current limit, thermal overload protection and safe
area protection. All overload protection circuitry re-
mains fully functional even if the adjustment terminal TO-39
is disconnected.
PIN CONNECTIONS
TO-3 TO-39 TO-220
(bottom view) (bottom view) (front view)
1 - Adj
2 - Output
3 - Input
1 - Output 1 - Adj
2 - Adj 2 - Output
Case is input 3 - input Heatsink surface connected to input
THERMAL CHARACTERISTICS
Symbol Parameter Typ. Max. Unit
o
Rthj-case Junction-case Thermal Resistance TO-3 4 C/W
TO-220 3
TO-39 15
o
Rthj-amb Junction-ambient Thermal Resistance TO-3 35 C/W
TO-220 70
TO-39 160
ORDER CODES
PART NUMBER TEMPERATURE PACKAGE
RANGE TO-3 TO-220 TO-39
LM137 -55 to 150 oC LM137K LM137H
LM237 -25 to 150 oC LM237K LM237SP LM237H
o
LM337 0 to 125 C LM337K LM337SP LM337H
2/14
LM137-LM237-LM337
SCHEMATIC DIAGRAM
3/14
LM137-LM237-LM337
ELECTRICAL CHARACTERISICS
o o
LM137: -55 C < Tj < 150 C
LM237: -25 C < Tj < 150 o C
o
4/14
LM137-LM237-LM337
TYPICAL APPLICATIONS
ADJUSTABLE NEGATIVE VOLTAGE REGULATOR
8/14