Professional Documents
Culture Documents
RVS4000 QI Rev - NC
RVS4000 QI Rev - NC
RVS4000 QI Rev - NC
BUSINESS SERIES
E Connect a different Ethernet
network cable from your
cable or DSL modem to the
Internet port on the Router’s
back panel.
E
F Power on the cable or DSL
modem.
Model No.
Model No.RVS4000
Model No. WIRED
2 Configure the Router
These instructions will show you E For the Connection Type Heartbeat Signal. Heartbeat
how to configure the Router. You setting, six connection types Signal is used primarily in
only need to configure the Router are offered through the Australia. Check with your ISP
once using any computer you have drop-down menu. Each Setup for the necessary setup
set up. screen and available features information.
will vary depending on which
A Open your web browser. Enter connection type you select. L2TP. L2TP is used mostly in
http://192.168.1.1 in its Automatic - DHCP Europe. Check with your ISP
Address field. Press the Enter Internet Connection Type for the necessary setup Heartbeat Signal
key. A information.
Automatic Configuration -
B A password request screen DHCP: If you are connecting F When you are finished
will appear. Enter the default through DHCP or a dynamic IP entering your Internet
user name and password, address from your ISP, keep connection settings, click the
admin, in lowercase letters in this default setting. Save Settings button to save
the User Name and Password your changes.
fields. (For added security, you Static IP: If your ISP assigns
should later set a new you a static IP address, select G Restart or power on your PCs
password, using the Static IP from the drop-down Static IP so they can obtain the router's
Administration tab’s menu. Complete the Internet new settings. L2TP
Management screen of the B IP Address, Subnet Mask,
web-based utility). Then click Default Gateway, and DNS H Test the setup by opening
the OK button. fields. You need to enter at your web browser from any
least one DNS address. computer and entering For additional information or troubleshooting help,
C The web-based utility will http://www.linksys.com/ refer to the User Guide on the CD-ROM. You can
appear with the Setup tab and PPPoE: If you are connecting registration. also call or e-mail for further support.
IP Mode selected. Click on the through PPPoE, select PPPoE 24-hour Technical Support
WAN option under the Setup from the drop-down menu. Congratulations! The installation 800-326-7114
(toll-free from US or Canada)
tab. Complete the User Name and PPPoE of the Router is complete.
E-mail Support