Professional Documents
Culture Documents
SIKA Catalog 2020 - Infrastructure v20 December 17 PDF
SIKA Catalog 2020 - Infrastructure v20 December 17 PDF
INFRASTRUCTURE AND
INDUSTRIAL
SIKA PHILIPPINES
12 .2020 EDITION
WE ARE SIKA
Sika is a specialty chemicals company
with a leading position in the
development and production of SIKA AT A GLANCE
systems and products for bonding,
sealing, damping, reinforcing, 25, 000+ EMPLOYEES
protecting and finishing in the 100+ COUNTRIES
construction and motor vehicle 300+ PLANTS WORLDWIDE
industries. 7 NEW FACTORIES IN 2019
93 NEW PATENTS IN 2019
MORE THAN 100 YEARS 5 ACQUISITIONS IN 2019
OF BUILDING TRUST 8.1 BN CHF NET SALES IN 2019
Our reputation for quality and reliability
is unmatched and illustrated through
a comprehensive portfolio of problem
solving products that have been
employed for many years in a diverse
range of applications.
1
WE ARE
SIKA PHILIPPINES
MORE THAN 2 KEY BRANDS ACTIVE IN 8
25 YEARS TARGET MARKETS
IN THE CONCRETE, REFURBISHMENT,
PHILIPPINES WATERPROOFING, ROOFING,
SEALING & BONDING, FLOORING,
BUILDING FINISHING, FFI &
2 MANUFACTURING 4 TECHNICAL CENTERS INDUSTRY
& LABORATORY MANILA, CEBU,
FACILITIES CAGAYAN DE ORO
LAS PIÑAS & & ILOILO
TAGUIG MORE THAN 300
PRODUCTS
RELIABLE, QUALITY
CONSTRUCTION SOLUTIONS
AVAILABLE LOCALLY
2
SIKA FULL RANGE SOLUTIONS
FOR CONSTRUCTION & INDUSTRY
WATERPROOFING Solutions used for below ROOFING Single-ply and built-up flat
and above-grade roofing systems
waterproofing: flexibile incorporating both flexible
membrane systems, liquid sheet and liquid applied
applied membranes, membranes as well as
waterproofing admixtures, thermal insulation and
joint waterproofing, various roofing accessories
waterproofing mortars
and injection grouts
SEALING & BONDING Solutions used for below FLOORING Flooring solutions based
and above-grade on synthetic resin and
waterproofing: flexibile cementitious systems
membrane systems, liquid that meet project
applied membranes, requirements for
waterproofing admixtures, mechanical properties,
joint waterproofing, safety regulation (e.g., slip
waterproofing mortars resistance), chemical or fire
and injection grouts resistance, etc.
BUILDING & FINISHING Sets of solutions FFI & INDUSTRY Façade, Fenestration and
dedicated to tile setting, Insulation (FFI) products
facade protection and for structural glazing and
decoration, and interior sealing of insulating glass
wall finishing units
3
INFRASTRUCTURE AND
INDUSTRIAL SOLUTIONS FROM SIKA
Sika has more than 100 years of experience in developing and producing a wide range of quality products
and systems that bond, seal, cover, strengthen, reinforce, repair, and protect every portion of the project.
Sika‘s Infrastructure and Industrial Solutions are a resource for integrated, compatible products and systems
that produce superior performance. These customized solutions from Sika minimize the effects of threatening
environmental conditions, ensure durable structures and help to maximize return on investment.
4
TABLE OF CONTENTS
EPOXY GROUTS ....................................... 20
CONCRETE.......................................... 8 Sikadur®-42 MP Normal HC.......................................................... 20
Sikadur®-53..................................................................................... 20
MINING........................................................... 14
Sika® Sigunit® P-1 AF.................................................................... 14
Sika® Sigunit® L-54 AF.................................................................. 14
Sika® Sigunit®-111 LS PH............................................................... 14 WATERPROOFING............................... 23
SikaBond® R&B-100....................................................................... 14
INJECTION WATERPROOFING......................... 24
Sikadur®-752................................................................................... 24
Sika®Injection-201 CE..................................................................... 24
JOINT WATERPROOFING............................... 24
REFURBISHMENT............................... 15 Sika® Waterbar............................................................................... 24
Hydrotite CJ-0725-3K..................................................................... 24
5
TABLE OF CONTENTS
LIQUID APPLIED MEMBRANES ................ 27-28 PASSIVE FIRE
SikaProof® Membrane................................................................... 27 PROTECTION SOLUTIONS......................... 36-37
SikaCoat Plus................................................................................. 27 Sikasil®-670 Fire............................................................................ 36
Sikalastic®-110............................................................................... 27 Sikacryl®-621 Fire........................................................................... 36
Sikalastic®-590............................................................................ 28 Sikacryl®-620 Fire.......................................................................... 36
Sikalastic-870BT............................................................................ 28 Sikaflex®-400 Fire......................................................................... 36
Sikalastic®-632 R.......................................................................... 28 Sika® Backer Rod Fire.................................................................... 36
Davco K10 GRS 2000..................................................................... 28 Sika Boom®-400 Fire.................................................................... 36
Sikacryl®-624 Fire.......................................................................... 36
SikaSeal®-623 Fire......................................................................... 37
Sikacryl®-625 Fire.......................................................................... 37
SikaSeal®-626 Fire Board.............................................................. 37
SikaSeal®-627 Fire Collar............................................................... 37
SikaSeal®-628 Fire Wrap............................................................... 37
ROOFING.......................................... 29 SikaSeal®-629 Fire Wrap...............................................................
Sikacrete®-630 Fire.......................................................................
37
37
6
TABLE OF CONTENTS
CEMENTITIOUS FLOORING............................. 45
Lanko 162 RD Flow Prime.............................................................. 45
FFI & INDUSTRY................................. 57
Lanko 123 Lankoself Thick............................................................. 45
Lanko 173 Lankoself Skim............................................................. 45
Lanko 783 Acrylic Polymer............................................................. 45 SILICONE SEALANTS ................................... 58
Sikasil® SG-18................................................................................. 58
ACCESSORIES................................................ 46 Sikasil WS-305KR.......................................................................... 58
Extender T...................................................................................... 46 Sikasil® SG-500 CN........................................................................ 58
Sikadur 501..................................................................................... 46
7
CONCRETE
CONCRETE
Range of admixtures that enhance specific properties
of fresh or hardened concrete such as workability,
watertightness, durability, load-bearing capacity or
early and final strength.
8
Sika® ViscoCrete® Series
CONCRETE ADMIXTURE
High-Efficient Superplasticizers n Provides many opportunities for cost improvement (e.g.
Latest development superplasticizer Cement replacement/ reduction, more economic design mix)
for concrete n Does not contain chloride or any other ingredients which
promote the corrosion of steel. It is therefore suitable for use
Packaging: in reinforced and pre-stressed concrete structures.
210 L/drum
1000 L/bulk Sika® ViscoCrete®-3002 P11, -3000 P7 & -4000PH
It is compliant for superplasticizers according to ASTM C494 Type G
Uses:
A unique multipurpose superplasticizer Sika® ViscoCrete®-381 PH and -385
that is particularly suitable for the production It is compliant for superplasticizers and long slump keeping according
of ready mix concrete. Additionally it provides to ASTM 494 Type G
high water reduction and improved fresh concrete characteristics.
With its outstanding cost / performance, Sika® ViscoCrete® is used Sika® ViscoCrete®-4100 and -386
for the following: It is compliant for superplasticizers according to ASTM 494 Type F
n A wide range of applications where excellent workability is
requested
n Concrete with high water reduction
n High efficient concrete applications Shelf Life:
n Variable use in different concrete systems with 12 months
different raw materials
n Self-compacting concrete (Sika® ViscoCrete®-4000 PH)
Advantages:
A powerful superplasticizer based on advanced technology which gives
the following advantages:
n High water reduction, resulting in high density, high strength
and reduced permeability
n Less sensitive against variations in aggregates and / or different
cement types
n High efficiency even at low dosage rates
n Extended workability in conjunction with subsequent strength
development
n Superior plasticizing effect, resulting in improved flow, placing
and compaction characteristics
n Reduced shrinkage during curing and reduced creep when
hardened
9
Sikament® NN Liquid and Powder Sikament® R-4 P1
CONCRETE ADMIXTURE
High Range Water-Reducing Concrete Admixture High Range Water-Reducing and Set Retarding
A highly effective dual action superplasticizer for Concrete Admixture developed for RMC
the production of free-flowing concrete or as a A liquid superplasticizing admixture based on selected
substantial water-reducing agent for promoting synthetic polymers especially designed to improved
high early and ultimate strengths; complies with performances of ready-mix concrete in hot weather,
ASTM C-494 Type F for long delivery/placement situations, and for long
Packaging: line of pumping concrete or when delays are
Liquid: 5 L/container Powder: 150 g /pack anticipated. It has an active water reducing agent;
10 L/container complies with ASTM C494-92 Type G that helps
210 L/drum promote early high strengths after final set of
concrete, and gives superb ultimate strengths
Uses:
Sikament® NN Liquid and Powder is used as a superplasticizer in the Packaging:
production of free-flowing concrete such as: 210 L/drum
n Slabs and foundations
n Walls, columns and piers Uses:
n Slender components with densely packed reinforcement Sikament® R-4 P1 as a superplasticizer for flowing concrete in:
n Textured surface finishes n Floor slabs and foundations
It is also used as a water reducing agent leading to high early n Slender components with densely packed reinforcement
strength concrete such as: n Walls and columns
n Precast concrete elements n Beams and ceilings
n Hollow blocks and pavements
n Pre-stressed concrete Advantages:
n Bridges and cantilever structures As a Superplasticizer:
n Areas of concrete where formwork must be removed quickly or n Highly effective without increased w/c ratio or risk of segreration
early loading applied n Lasting control of slump loss
Advantages: n No adverse effect on ultimate strengths
As a Superplasticizer: As a Water Reducer:
n Workability is greatly improved n Early and ultimate strengths significantly increased. Up to 20%
n Increased placeability in slender components with packed water reduction
reinforcement n Especially suitable for hot climates
n Decreases the amount of vibration n No excessive air entrainment and adverse shrinkage effect
n Normal set without retardation n Increased water tightness and improved surface finish
n Significantly reduces the risk of segregation Shelf Life:
As a Water reducer: 12 months
n Up to 25% water reduction
n 28-day strength improved by up to 40%
Shelf Life:
12 months
10
CONCRETE ESSENTIALS
Sika® Antisol S
Curing Agent For Concrete Advantages:
Sika® Antisol S is a ready to use solution Sika® Antisol S provides the following beneficial properties to
which forms a micro-crystalline seal in the concrete surfaces:
concrete pores reducing the evaporation n Generally helps concrete to attain maximum hydratation,
rate of moisture from the concrete mix strength durability and surface hardness
and thus assisting in the complete curing n Improves the surface appearance
process. n Reduces shrinkage
n Reduces dust formation
Packaging: n Reduction in permeability of concrete
210 L/drum n When used properly, adhesion of subsequent treatments to
Uses: concrete surface is not impaired
n Applied to fresh concrete surfaces to form an
impervious layer which protects the concrete from rapid water Shelf Life:
evaporation during initial curing stages. 12 months
n Particulary recommended for the treatment of
vertical surfaces which will receive subsequent treatments or
where resin based curing membranes would be unsuitable.
n Useful in buildings and manufacturing industries
Packaging: Packaging:
210 L/drum 210 L/drum
Uses:
Uses: Sika® AER PH is used to produce easily workable
n Can be used with excellent effect on formwork and durable concrete for:
designed to produce all types of finishes, from n Roads
fair-faced to textured. n Runways and taxi ways
n Has been found to assist in the protection of n Aprons and hard standings
equipment used in the handling and placing of n Dams and reservoirs
concrete. A thin coating on Bowls, Borrows, Skips, n Mass concrete structures
Shovels, etc. will make these easier to clean and
protects against corrosion.
Advantages:
Advantages: Sika® AER PH provides the following properties:
Sika® Formol-EX can be applied by either n Improved workability
spray, brush or roller. Surfaces should be n Improved durability
clean and free from greasy and old concrete. n Increased cohesion reducing the risk of segregation
n Reduced water content without loss of workability
Shelf Life: n Unaffected setting time even when overdosed
Unlimited in original Shelf Life:
sealed container 12 months
Sika® Fume
Additive for Durable and High Ultimate Advantages:
Strength Concrete SikaFume contains extremely fine latently reactive silicic dioxide.
The presence of the substance imparts greatly improved internal
SikaFume is a new generation concrete cohesion and water retention in the fresh concrete. In the hardened
additive in loosely agglomerated particles concrete, the latently reactive silica fume forms a chemical bond with
form based on silica fume technology. It is the free lime (CaOH2). The additional formation of hydration products
a highly effective additive for the production results in a significantly denser cement matrix.
of high performance concrete.
With the use of SikaFume the concrete will show the following
Packaging: properties:
10 Kg/bag n High stability of green concrete
n Highly increased durability
Uses: n Increased ultimate strengths
SikaFume is used in shortcrete, n Increased abrasion resistance
structural concrete, precast concrete and n Increased water tightness
other fields of concrete construction where n Increased gas tightness
high demands are imposed on the quality of n Reduced chloride penetration
fresh and hardened concrete.
Shelf Life:
36 months
11
CONCRETE ESSENTIALS
Sika® MRA Sika®Rugasol C
Emulsion-Based Mould Release Agent Surface Retarder for Horizontal Surfaces
A carefully blended combination of refined A ready-to-use liquid that retards the surface
mineral oils and emulsifying agents, producing mortar of concrete to expose the aggregate
a thin film stable release agent
Packaging:
Packaging: 210 L/drum
210 L/steel drum
Uses:
Uses: Sika®Rugasol C is a surface retarder for
Sika® MRA, when applied to steel, plastic and application on horizontal surfaces of freshly
timber formwork, allows clean, fast and laid concrete area such as:
easy striking. n Floor slabs
n Paths
Advantages: n Driveways
Sika® MRA provides the following properties: n Patios
n Good adhesion to the formwork n Swimming pools
n Does not re-emulsify n Concrete construction joints
n Undisturbed by concrete
n Reduces concrete contamination Advantages:
n Non-inflammable Exposing the aggregate is one of the most effective methods of
n MRA is suitable for use on all type of formwork preparing concrete construction joints.
n All tools can be cleaned with water By producing exposed aggregate surface finishes, it offers the
n It is an effective rust inhibitor opportunity for decorative finishes to concrete surfaces particularly
Shelf Life: around houses, civic amenities, office buildings, shopping plazas,
12 months commercial building, and others.
Shelf Life:
12 months
Shelf Life:
12 months
12
CONCRETE ESSENTIALS
SikaFiber PP Micro-20 Sikacrete-213 FMY
Monofilament Polypropylene Fiber Wet Sprayed Fire Protection Mortar
SikaFiber PP Micro-20 is a monofilament Cement-based pre-bagged, dry mix fire
polypropylene fiber for use in concrete to protection mortar for wet sprayed application
reduce the incidence of plastic shrinkage especially in tunnel construction. Sikacrete has
cracking. It increases the strain capacity approval for use up to 4 hours fire protection.
of the fresh concrete therefore reducing
plastic cracking. Packaging:
12 Kg/bag
Packaging:
18 kg/box (0.6 kg/PE bag) Uses:
Sikacrete-213 FMY is used for concrete,
Uses: reinforced concrete, carbon fiber and steel
SikaFiber PP Micro-20 is ideal for use in structures exposed to fire hazards. It contains
concrete used to produce: phyllosilicate aggregates, which are highly
n Floor slabs effective in resisting the heat of hydrocarbon
n Driveways fires. The thickness of the fire protection
n Tilt slabs layer to be applied depends on the specified
n Floor toppings fire resistance. The outstanding properties
n Precast units of Sikacrete-213 FMY allow greatly reduced
n Colored concrete thickness of the fire protection layer required
SikaFiber PP Micro-20 can be used in both dry and wet shotcrete
applications such as: Advantages:
n Pools n Pre-bagged dry mortar mix for application by the wet spray
n Channels process
n Retaining walls n Minimal layer thickness to meet specifications
n Building restoration n Easy to apply
Advantages: n It does not contribute to the formation of smoke or toxic fumes
SikaFiber PP Micro-20 provides the following benefits: in fire
n Less plastic shrinkage cracking n Light weight, low density
n Increased resistance to impacts and shattering n The sprayed mortar surface can be finished by trowel or wood
n Increased abrasion resistance float
n Non-staining n Minimal rebound
When used in shotcrete the benefits are:
n Reduced rebound waste n Increased fatigue resistance Shelf Life:
n Thicker layer builds n Alkali and dust proof 12 months
n Reduced sag n Non-staining
Shelf Life:
Unlimited in original sealed container
13
Sika® Sigunit® P-1 AF Sika® Sigunit® L-54 AF
Accelerating Shotcrete Admixture Powder Alkali-Free Liquid Shotcrete Accelerator
MINING
Sika® Sigunit® P-1 AF is a readily soluble powder. Sika® Sigunit® L-54 AF is a high-performance,
When it is dissolved in water it is a high alkali-free accelerator in liquid form for shotcrete
performance liquid, alkali-free set accelerator applications.
for shotcrete. Its effectiveness depends on its
mixing ratio between powder and water. Packaging:
210 L/drum
Packaging:
25 Kg/bag Uses:
Sika® Sigunit® L-54 AF is a set accelerator
Uses: suitable for both wet and dry spray
Sika® Sigunit® P-1 AF dissolved in water is applications mainly used in:
suitable for both dry and wet spraying n Securing of rock in tunnel and mine construction
processes and it is used for: n Rock and slope stabilization
n Support at the face whilst advancing tunnel and mines n High quality shotcrete for general construction work
n Rock and slope stabilization
n High quality lining shotcrete Advantages:
n Alkali-free (non-caustic)and classified as non-toxic product
Advantages: n Very fast setting of shotcrete mixes
Sika® Sigunit® P-1 AF dissolved in water as a shotcrete set n No strength loss of the accelerated concrete if used correctly
accelerator has the following characteristics and advantages: n No additional contamination of mountain and ground water due
n High early strength development to washed out alkalis
n Alkali-free n Large reduction in rebound
n Minimal strength loss of the accelerated concrete n Improves bond of shotcrete, making overhead spray easier
n No pollution of groundwater by leached out alkalis n Free of chlorides, no danger to steel reinforcement and steel
n Distinct reduction of rebound & dust fibers
n Improves bond of shotcrete to rock and concrete thus n Low viscosity - less pumping problems
facilitating overhead spraying
n Chloride-free, no negative effect on reinforcement steel Shelf Life:
3 months
The supply in powder form has the following additional advantages:
n High flexibility in use
n Low cost of logistics
n Longer shelf life
Shelf Life:
12 months
14
REFURBISHMENT
REFURBISHMENT
Range of concrete protection and repair solutions such
as repair mortars, protective coatings, grouts
and structural strengthening systems
15
CEMENTITIOUS GROUTS
SikaGrout® UW MY SikaGrout®-200 PT ID
Shrinkage Compensated Cementitious Grout for High Performance, Zero Bleed, Sand Free, Cementitious
Underwater Applications Grout for Post-Tensioned Structures and Anchor Bolting
SikaGrout®-215 SikaGrout®-212
Pumpable Shrinkage Compensated Shrinkage Compensated Grout
Cementitious Grout
SikaGrout®-212 is a shrinkage compensated,
SikaGrout®-215 is a shrinkage compensated self-leveling, pre-mixed cementitious
self-leveling, cementitious grouting mortar grouting mortar with extended working
with extended working time to suit local time to suit local ambient temperature;
temperature Complies to ASTM C-1107
Packaging: Packaging:
25 Kg/bag 25 Kg/bag
Uses: Uses:
SikaGrout®-215 is suitable for repairs to SikaGrout®-212 is suitable for the following
concrete structures and the following grouting works: machine foundations, rail beds,
grouting works with clearance of columns in precast construction anchor bolts,
10mm or more: bridge bearings cavities, gaps, recesses
n Machine foundations
n Rail beds Advantages:
n Columns in precast construction n Excellent flowability
n Concrete anchors n Good dimensional stability
n Bridge bearings n High strengths, adjustable consistency
n No bleeding
n Cavities DPWH Pay Item n Non-toxic, non-corrosive DPWH Pay Item
n Gaps Listed Reference
n Recesses n Ready and easy to use Listed Reference
n Economical
Advantages: n Impact and vibration resistant
n High early strength
n High ultimate strength Shelf Life:
n Extended working time 12 months
n Dense, non-shrink
n Non-toxic, non-corrosive
n Chloride and iron-free
Shelf Life:
12 months
16
CHEMICAL ANCHORING CEMENTITIOUS GROUTS
SikaGrout®-112 PH
General Purpose Non-Shrink Grout
For grouting works requiring up to 6,000 psi (28d) NEW!
Packaging:
25kg bag
Uses:
Bedding, filling and grouting applications where complete filling of voids and
non–shrink material is required. It can be used under-plate, repairs to precast
concrete, bedding bearing plates and anchor bolt fixing.
Shelf Life:
6 months
DPWH Pay Item
Listed Reference
Sika® AnchorFix-3001
High-Performance, Professional Epoxy Anchoring Adhesive
Solvent-free, thixotropic, two-part, epoxy resin-based, high performance anchoring
adhesive for threaded rods and reinforcing bars in both cracked and un-cracked concrete
17
CONCRETE REPAIR
SikaTop®-121
Polymer Modified, Patching and Adhesive Mortar
A two-component cement based polymer modified trowelable adhesive and filling
compound for the protection and repair concrete surfaces
Packaging: Shelf Life:
25 Kg/set 9 months
Uses:
n Protective coating for bridge parapets retaining walls
n Filling compound to level of irregularities and fill blowholes and fine honey combings
n Bonding mortar between new and old concrete
n Rendering for reservoirs
Advantages:
n Easy to mix and apply
n Excellent adhesion
n Good mechanical strength
n Increase resistance to salt water, chlorides and carbonation
n Waterproof
n Non-corrosive to steel, non-flammable
n Non-toxic
n High abrasion resistance
SikaTop®-122
Fiber-Reinforced, Polymer Modified Repair Mortar Advantages:
n Easy to mix and apply
Two-component, cement based polymer modified, n Excellent adhesion
repair mortar with added polyamide fibers, to form a n Good mechanical strength
high strength repair and levelling mortar for concrete n Good water and oil resistance
n Increase resistance to salt water,
chloridesand carbonation
Packaging: n Non-toxic and non-flammable
30 Kg/set n High abrasion resistance
Uses: Shelf Life:
As an economical and easy to use concrete 9 months
repair mortar, suitable for:
n Bridges
n Water retaining structures
n Making good damaged edges and joint arises
n Repairing honeycombing
n Concrete repair in general
SikaRepair-224
One-Component, Cementitious, Sprayable Mortar for
Structural Repairs Advantages:
n Ready-to-use, one-component material
SikaRepair-224 is a one-component, pre-packaged, ready-to-use, n Easy to use; just add water
cementitious, silica fume, fiber-reinforced, high strength n Sprayable system
shrinkage-compensated mortar. Formulated for application by n Potable water approved
trowel or low pressure spray. It is designed especially for repair of n Superior workability. Can be trowelled
overhead and vertical surfaces. and screeded after application
n Labor-saving system
Packaging: n Superior abrasion resistance over
22.7 Kg/bag conventional Portland cement mortar
n Bond strength ensures superior adhesion
Uses: n Not a vapor barrier
A high-performance repair mortar for wet spray application. n Compatible with coeffiecient of thermal
Suitable for new construction, repairs, and maintenance work. expansion of concrete
Typical applications include: n High early strengths
n Structural repair material for water and wastewater treatment n Very low shrinkage
plants, parking structures, industrial plants, bridges, tunnels and n Silica Fume enhanced
dams, etc. n Fiber reinforeced
n Use on vertical and overhead surfaces
n Use on grade, above, and below grade on concrete and mortar
n Potable water tank (NSF approved in Marion, OH and Santa Fe Shelf Life: 12 months
Springs, CA)
18
CONCRETE REPAIR
Lanko 712 Rapidex Lanko 731 Lankorep Structure PH
Fast-Setting Non-Shrink Fiber Reinforced Non-Shrinking Mortar
Fiber-Reinforced Mortar
LANKO 712 LANKOROAD RAPIDEX is a LANKO 731 LANKOREP STRUCTURE PH is a
fast-setting repair mortar for roads and fiber-reinforced non-shrink mortar for repair
floors. of concrete structures and reinforcement of
weakened structures with application thick-
Packaging: Shelf Life: ness of 5mm to 50mm.
25 kg bag 6 Months
Packaging: Shelf Life:
Uses: 25 kg bag 12 Months
n Repairs to concrete facades,
spalling, honeycombing Uses:
n Concrete restructuring: balconies, n Repair of concrete surfaces: spalling,
terraces, walls, overhangs, cornices honeycombing, stairnosing, ramp, etc.
n Concrete restructuring: pillars, slabs, posts,
Advantages: dams, aprons and spillways
n Non-shrink mortar n Reinforcement of weakened structures:
n Provides a smooth finish balconies and cornices DPWH Pay Item
DPWH Pay Item n Treatment of chamfers and seams prior
n Can be painted over after 24 hours Listed Reference Listed Reference
(depending on thickness and to waterproofing
atmospheric conditions) Advantages:
n High mechanical strength
n Excellent resistance to sea water & sulphated waters
Packaging:
25 kg bag
Uses:
n Repairs to concrete facades, spalling, honeycombing
n Concrete restructuring: balconies, terraces, walls, overhangs, cornices
Advantages:
n Non-shrink mortar
n Provides a smooth finish
n Can be painted over after 24 hours (depending on thickness and atmospheric conditions)
Sikacrete® Gunite-105 PH
Cement Based Shotcrete Repair Mortar
NEW!
Sikacrete® Gunite-105 PH is a single component, high strength cement based repair mortar
designed for vertical and overhead application, sea walls, bridge decks, and piers, canals, sewer
linings and embankment stabilization.
Uses:
n Wide range application in ground-support application, linings, and building structures
n Applied as final lining or temporary support during tunneling
n Used for stabilization and protection of earth surface during embankment stabilization
n For swimming pool construction and skate parks
Advantages:
n High Early Strength
n High Mechanical Strength
n Easy and Fast Application
19
EPOXY GROUTS
Sikadur®-42 MP Normal HC Sikadur®-53
3-part, Multipurpose Epoxy Water Displacing Epoxy Resin Grout
Grouting System
Sikadur®-42 MP Normal HC is a Sikadur®-53 is a pourable, multi-functional
three-component, multipurpose, high density epoxy grout based on a 2-compo-
moisture tolerant, epoxy grouting nent
system. For use at temperatures solvent free epoxy resin system containing fine
between +10oC and +30oC fillers. Sikadur®-53 exhibits excellent
Packaging: insolubility and displacement characteristics in
12 Kg/set wet and underwater applications but useable in
Uses: Packaging:
High strength grouting and fixing of: 18 Kg/set
n Starter bars Uses:
n Anchors n Used for underwater and dry grouting work and offers excellent
n Fasteners adhesion to both dry and clean water immersed concrete, stone
n Tie rods masonry, brick, wood or steel surfaces
n Crash barrier posts n Highly insoluble in water and safe for specialist diver use
n Fence and railing posts n Used for injection of cracks 0.5mm to 40mm wide under water
Under-grouting and bedding of: (cracks not conducting a water flow under pressure)
n Base plates n Ideal for pile jacketing using prepacked aggregate in formwork
n Machine bases, seat base-plates for light and heavy machinery n Mixed with 30% by volume sand a high build grout is formed that is
including heavy impact and vibratory machinery, reciprocating easy to apply under water
engines, compressors, pumps, presses, etc. n Used to grout starter bars, baseplate grouting and bolts for dry and
n Bridge bearings underwater construction work
n Mechanical joints (i.e. road/bridge/deck types, etc.) n May also be used as a bonding bridge for underwater concreting and
Sleeper-less, direct rail fixing: as a pipeline jointing material
n Crane tracks Advantages:
n Light rail and permanent way in tunnels n Suitable for dry, wet, underwater or marine applications
n Light rail and permanent way over bridges n Applicable at low temperatures
Advantages: Shelf Life: n High mechanical strengths
n High early strengths Part A & B -24 months n Highly insoluble in water
n Ready-to-mix, pre-batched units Part C - 9 months n Supplied in factory proportioned units
n Moisture tolerant n Shrink-free
n Non-shrink n Can be bulked out with aggregate of thicker pour applications
n Corrosion and chemically resistant n Excellent chemical resistance to water, sea water, waste water,
n Stress and impact resistant sewage, fuels, oils, dilute acids and dilute alkalis
n High compressive strength n To be used in conjunction with pile jacket systems for
n High vibration resistance rehabilitation of concrete and timber piles in marine applications
n Low coefficient of thermal expansion
20
STRUCTURAL STRENGTHENING
SikaWrap®
Woven Unidirectional Fiber Fabric, Designed forvStructural
Strengthening Application as Part of the Sika® Strengthening
System
SikaWrap® is a unidirectional woven carbon or glass fiber fabric with
mid-range strength, designed for installation using the dry or wet
application process; Complies to DPWH Item-416 & ACI 440.2R
Product Range:
Carbon Fiber
SikaWrap®-230 C 0.5 m x 100 m/roll
SikaWrap®-300 C 0.5 m x 100 m/roll
SikaWrap®-450 C 0.5 m x 50 m/roll
SikaWrap®-600 C 0.5 m x 50 m/roll
DPWH Pay Item
Glass Fiber Listed Reference
SikaWrap®-430 G 0.5 m x 80 m/roll
SikaWrap®-930 G 0.5 m x 40 m/roll
Uses: Advantages:
Structural strengthening of reinforced concrete, masonry, brickwork, n Manufactured with weft fibers to keep the fabric stable (heat-set)
and timber elements or structures, to increase flexural and shear n Multifunctional fabric for use in many different strengthening
loading capacity for: applications
n Improved seismic performance of masonry walls n Flexible and accommodating of different surface planes and
n Replacing missing steel reinforcement geometry (beams, columns, chimneys, piles, walls, soffits,
n Increasing the strength and ductility of columns silos, etc.)
n Increasing the loading capacity of structural elements n Available in different widths for optimum utilization
n Enabling changes in use/alterations and refurbishment n Low density for minimal additional weight
n Correcting structural design and/or construction defects n Extremely cost effective in comparison to traditional
n Increasing resistance to seismic movement strengthening techniques
n Improving service life and durability
n Structural upgrading to comply with current standards Shelf Life:
Unlimited if stored properly
Sika®CarboDur®
Heavy-Duty CFRP Strengthening System Serviceability improvement:
n Decrease of deformation
Heavy-duty CFRP strengthening system for reinforced n Stress reduction in steel reinforcement
concrete, masonry, stonework, steel, aluminum and n Crack with reduction
timber. Change in structural system:
Sika® CarboDur® CFRP externally bonded or near n Removal of walls or columns
surface mounted plates, rods and strings; n Removal of slab sections for openings
Complies to DPWH Item-416 & ACI 440.2R Change of specifications:
n Earthquakes
Product Range: n Adjustment to changed design philosophy
Design or construction defects:
Externally bonded plate n Insufficient reinforcement
Dimension Packaging n Insufficient structural depth
Sika®CarboDur® S1012 100 mm x 1.2mm 100m/roll
Sika®CarboDur® S0512 50 mm x 1.2mm 100m/roll Advantages:
n Low in weight
Near surface mounted range n Available in any length, no joints required
n Low overall thickness
CFRP Plate Dimension Packaging n Easy to transport (rolls)
Sika®CarboDur® S212 20 mm x 1.2mm 100m/roll n Laminate intersections are simple
n Economical application -no heavy handling and installation
CFRP Rod Dimension Packaging equipment
Sika®CarboDur® BC 10 Rod 10 mm ∅ 100m/roll n Very high strength
n Available in various moduli of elasticity
Uses: n Outstanding fatigue resistance
To strengthen structures for: n No corrosion
n Loading increase n Clean edges without exposed fibers
n Increasing the live loads n General construction approval in many countries
n Increased traffic loads
n Installation of heavy machinery in industrial buildings Shelf Life:
n Changes of building utilization Unlimited if stored properly
Damage to structural parts:
n Ageing of construction material
n Steel reinforcement corrosion
n Vehicle impact
n Fire
n Earthquakes
21
STRUCTURAL STRENGTHENING
SikaWrap® FX-50 C Sikadur®-30
Carbon Fiber String for Structural Connection and Anchoring Adhesive for Bonding Reinforcement
of SikaWrap® Strengthening System Sikadur®-30 is a thixotropic, structural two-part adhesive, based on
SikaWrap® FX-50 C is a unidirectional carbon fiber string, encased a combination of epoxy resins and special filler, designed for use at
in a plastic envelope, that serves as fiber connector for the normal temperatures between +80C and +350C
anchorage of SikaWrap fabrics Packaging: Shelf Life:
6 Kg/set 24 months
Packaging: Uses:
25 m/roll Adhesive for bonding structural reinforcement,
particularly in stuctural strengthening works.
Uses: Including:
n Anchoring SikaWrap® carbon n Sikadur®CarboDur® Plates to concrete,
and glass fiber fabrics on concrete brickwork and timber
or masonry n Steel plates to concrete
n Connecting SikaWrap® carbon or
glass fiber fabrics through Advantages:
concrete or masonry structures n Easy to mix and apply
n Flexible near surface mounted n No primer needed
strengthening (NSM) n High creep resistance under
permanent load
Advantages: n Very good adhesion to concrete,
n Carbon fiber, corrosion resistant, masonry, stonework, steel, DPWH Pay Item
durable cast iron, aluminum, timber and Sika® Listed Reference
n Multifunctional use CarboDur® Plates
n Easy to install n Hardening is not affected by humidity
n High strength adhesive
Shelf Life: n Thixotropic: non-sag in vertical and overhead applications
Unlimited if stored properly n Hardens without shrinkage
n Different colored components (for mixing control)
DPWH Pay Item n High initial and ultimate mechanical resistance
Listed Reference n High abrasion and shock resistance
n Impermeable to liquids and water vapour
Sikadur®-330 Sikadur®-300
2-part Epoxy Impregnation Resin 2-part Epoxy Impregnation Resin
Sikadur®-330 is a two-part, thixotropic epoxy
based impregnating resin/adhesive Sikadur®-300 is a two-part, epoxy based
impregnating resin
Packaging:
5 Kg/set Packaging:
4 Kg/set 30 Kg/set
Uses: Uses:
n Impregnation resin for SikaWrap® n Impregnating resin for SikaWrap® fabric
fabric reinforcement for the dry reinforcement for the wet application
application method method
n Primer resin for the wet application n Primer resin for the wet application
system system
Advantages: Advantages:
n Easy mix and application by trowel n Easy mix and application by trowel
and impregnation roller and impregnation roller
n Manufactured for manual saturation n Manufactured for manual or
methods DPWH Pay Item mechanical saturation methods DPWH Pay Item
n Excellent application behaviour to Listed Reference n Good adhesion to many substrates Listed Reference
vertical and overhead surfaces n High mechanical properties
n Good adhesion to many substrates n Extra long pot life
n High mechanical properties
n No separate primer required Shelf Life:
24 months
Shelf Life:
24 months
22
WATERPROOFING
WATERPROOFING
Solutions used for below and above-grade
waterproofing: flexibile membrane systems,
liquid applied membranes,waterproofing
admixtures, joint waterproofing,
waterproofing mortars and injection grouts.
23
INJECTION WATERPROOFING
Sikadur®-752 Sika®Injection-201 CE
Low Viscosity Epoxy Resin Injection Elastic Pur-Injection Resin for Permanent Watertight Sealing
A solvent free, 2-component super low
viscosity liquid, based on high strength Sika® Injection-201 CE is a very low
epoxy resins viscous, elastic and solvent-free
polyurethane injection resin. In contact
Complies with ASTM C881-78 Type I with water, a uniform, closed and
Grade 1, Class B & C therefore watertight pore structure
forms, which is elastic and flexible
Packaging:
5 Kg set Packaging:
20.6 Kg/set
Uses:
To fill and seal the cavities and cracks Uses:
in structural concrete such as columns, Sika® Injection-201 CE is used for permanent watertight sealing
beams, foundation, decks and water- with some flexibility to absorb limited movement, in dry, damp
retaining structures DPWH Pay Item or water-bearing cracks and joints in concrete, brickwork and
natural stone
Listed Reference Sika® Injection-201 CE can be used for the injection of the
Advantages:
Tenacious crack sealing grout SikaFuko®-System (non re-injectable)
Super-low viscosity For use in water-bearing cracks under hydrostatic pressure,
Suitable in both, dry and damp conditions preliminary injection shall be made with Sika® Injection-101 RC
High mechanical and adhesive strength
Hard, but not brittle Advantages:
No shrinkage Permanently elastic, can absorb limited movements
No shrinkage in subsequent dry conditions
Shelf Life: Due to its low viscosity it can penetrate into cracks >0.2 mm
24 months in width
Cured Sika® Injection-201 CE is inert and chemically resistant
Solvent-free
Can be injected as a one component system
Shelf Life:
36 months
JOINT WATERPROOFING
Sika® Waterbar Hydrotite CJ-0725-3K
Flexible PVC Water Stop A Hydrophilic Swellable Rubber Combination Material for
Sealing Site Formed Concrete Joints
Sika® Waterbar are constructed from
flexible thermoplastic PVC. They are
designed to stop the migration of water Packaging:
through construction and expansion joints 4 x 10 m rolls/box
in concrete structures. Sika® Waterbar are
available in various sizes and profiles to Uses:
suit all types of application Seal joints between precast
concrete units, steel, and other materials.
Profiles:
Construction Joints Expansion Joints Advantages:
V-25, V-20, V-15, AR-25 0-25, 0-20, 0-15 Expansion delay coating preserve it from
influence of water from freshly poured concrete
Packaging: Bi-directional swelling mechanism (top and bottom)
20 m/roll Expands itself as it absorbs water and fills up concrete
Joint gaps NSF 61 certified
Uses:
For the effective sealing of concrete construction and expansion Shelf Life:
joints in structures such as: Unlimited if stored properly
Basement
Water reservoirs
Sewage treatment plants
Swimming pools
Retaining walls
Lift shafts
Tunnels, culverts
Service pits
Advantages:
Sealing starts as soon as the concrete has hardened
Multi-rib profile provides impenetrable barriers to water
migration
Can be easily site welded
Good chemical resistance
Shelf Life:
Unlimited if stored properly
24
CEMENTITIOUS WATERPROOFING INTEGRAL WATERPROOFING
Sikalite® Sika®-1
Powdered Waterproofing Admixture Liquid Waterproofing Admixture
for Mortar Sika®-1 is a normal setting waterproofing
Sikalite® is a powdered waterproofing admixture for mortar and concrete
admixture, which blocks the capillaries and
pores in concrete, cement and mortars Packaging:
preventing the movement of moisture 210 L/drum
5L/container
Packaging:
800 g/plastic bag (25 pieces/box) Uses:
Sika®-1 is used for waterproofing of mortars
Uses: and concrete, in particular for:
Walls Renders, masonry mortars and screeds
Facades Reinforced and unreinforced concrete
Floor toppings Brick, concrete and stone substrates
Jointing mortars Indoor and outdoor applications, such as basements,
swimming pools, tunnels, water tanks, manholes, culverts
Advantages: Use in tropical and hot climate conditions
Easy to use
Economical Advantages:
Watertight, but vapor permeable Increased impermeability of mortar/concrete
Chloride-free Chloride-free
Easily dispersed
Shelf Life: Ready to use
12 months
Shelf Life:
24 months
Uses:
Potable water reservoirs (covered)
Tanks and cisterns (covered)
Shaft linings and lift shafts (covered)
Walls, floors and toilets & baths
Carparks, roof decks (with concrete topping)
SikaTop® Seal-107
Semi-Flexible Protective and Advantages:
Waterproofing Slurry Uniform membrane integrity due to high solid content
Certified for use in potable water tanks
Two-component, pre-dosed, ready-to-use Pre-dosed, easy to mix and use
waterproofing slurry based on resin Semi-flexible
modified cementitious material Impermeable
Packaging: Excellent adhesion on sound substrate
25 Kg/set No drying or shrinkage cracks
25
CEMENTITIOUS WATERPROOFING
Davco K11 Superflex
2 Component Flexible Hydraulic Micro-Mortar
DAVCO K11 SUPERFLEX is a two-component flexible hydraulic micro-mortar for the protection
and waterproofing of masonry and concrete structures.
Packaging:
34 kg Set Shelf Life:
Part A: 23 kg Powder 12 months
Part B: 10L Bonding Agent
Uses:
Waterproofing:
n Reservoirs, water towers, engineering structures, retention tanks, etc.,
n Under-tile sealant for swimming pools (bonded with DAVCO Dustless Heavy Duty or
DAVCO Dustless Premium), Under-tile or mortar-covering sealant for balconies, and
terraces (except terrace roofs)
n Lift shaft basements, car parks, underground premises, etc.
n Under-tile sealant for damp premises
Protection against:
Weathering (engineering structures, silos, concrete, domes etc.
Harmful water (underground tanks, water treatment stations,industrial discharge, etc.)
Please contact us regarding the compatibility of coverings with contact products
Advantages:
n Flexible hydraulic micro-mortar
n Excellent resistance to sea water & sulphated water
n Resistance to UV and micro cracking up to 4mm
Advantages:
n For interior and exterior use (below grade applications)
n High resistance to positive and negative pressure
n Non-toxic
26
Davco K11 Matryx
CEMENTITIOUS WATERPROOFING
Cementitious Waterproofing System For Protection Of Concrete Structures By Crystallization
DAVCO K11 MATRYX is a cementitious waterproofing system which protects and waterproofs concrete
structures by crystallization. The active chemicals react with moisture in the concrete resulting in
crystalline formulation within the pores and capillary tracts and concrete, thus waterproofing the
structure against penetration of water and other liquids from any direction. It gives a strong and lasting
waterproofing against dampness and ground hydrostatic pressure.
Sikalastic®-110
High Elasticity, 1-part PolyurethaneBituminous Waterproofing Coating
Sikalastic®-110 is a water-based 1-part modified polyurethane/bituminous coating, formulated to
form a highly elastic, seamless and crack bridging membrane
Uses:
Due to its high elasticity, Sikalastic®-110 can be applied on different structures including those
subject to thermal movement and vibration such as:
Concealed RC flat roof
Hydraulic structures like swimming pools, water features
External walls to be buried below ground
Waterproofing coating under tiled areas like podium, bathrooms and balconies
Advantages:
Easy application by roller, brush or sprayed, even onto vertical walls and ceiling
High elasticity
High crack-bridging capability
Optimum adhesion onto concrete
Can be applied directly on damp surface
Non-toxic
Low VOC and Eco-friendly
27
LIQUID APPLIED MEMBRANES
Sikalastic®-590 Sikalastic-870BT
Liquid Applied Roof Waterproofing Spray Applied Polyurea Membrane
with Improved Ponding Water Capability
Sikalastic -870 BT is a two part,
Sikalastic®-590 is a one component elastic, 100% solids, very fast curing
polyurethane-acrylic dispersion with Polyurea spray applied membrane
improved water ponding resistance/ excellent where exposure to high acidic and
UV resistance, good crack-bridging alkaline chemical concentrations
capacity and great aesthetics. are present. Sikalastic -870 BT is for
For manual / spray application, Sikalastic®-590 machine application only.
can be appied as coating or a reinforced liquid
applied membrane with Sikalastic® Fleece
Packaging:
Packaging: Part A: 200.0 kg drum
20 Kg/pail Part B: 175.0 kg drum
Part C: 15.0 kg can
Uses:
For waterproofing solutions in both new construction and Uses:
refurbishment projects For waterproofing applications on steel and concrete.
For roofs with many details and complex geometry when Typical uses on:
accessibility is limited Primary and secondary containments
For cost-efficient life cycle extension of failing roofs Waste water treatment plants
For reflective coating to enhance energy efficiency by reducing Fertilizer plants and transportation
cooling costs (Sikalastic®-590 White) Mines and mining processes
Ballast tanks
Advantages: Silage tanks and troughs
Good behavior under limited water ponding Sludge digesters
UV resistant and resistant to yellowing and weathering
Highly elastic and crack-bridging
Non-toxic and VOC compliant water-based coating Advantages:
One-component - ready to use High acidic and alkaline chemical resistance
Excellent adhesion on porous and non-porous substrates High resistance to microbial waste
Seamless waterproofing membrane Fast reactivity and cure time
Water vapour permeable Almost immediate return to service time
Applicable in temperature from -15°C to 70°C
Shelf Life: Performs in constant temperatures from -30°C to 60°C
12 months 100% solids
Crack-bridging properties
Shelf Life
Part A: 6 months
Part B: 12 months
Part C: 12 months
28
ROOFING
ROOFING
Single-ply and built-up flat roofing systems
incorporating both flexible sheet and liquid
applied membranes as well as thermal insulation
and various roofing accessories
29
LIQUID APPLIED MEMBRANES
SikaProof® Membrane SikaCoat Plus
Water Based Bitumen Modified Waterproofing Multipurpose Highly Flexible Acrylic
Based, Alkali-Resistant Liquid Applied
Sikaproof membrane is a 1-component, Membrane
water-based, bitumen polymer modified
waterproofing, cold applied liquid membrane One-component, multipurpose, highly
flexible acrylic-based, alkali resistant li-
Packaging: Shelf Life: quid applied membrane. It can be applied
18 Kg/pail 12 months on parapet wall, external wall, etc
Uses: Packaging: Shelf Life:
Below grade waterproofing of concrete 20 Kg/pail 12 months
and masonry surfaces Uses:
Flat roofs New plastering
Balconies Finishing
Basements, etc. Sealing joint, laps and roofing screws on
various kind of roofing (roof tile, asbestos, zinc)
Advantages: Parapet walls
Single component, ready to use
Easily applied by spray roller or brush Advantages:
Fast-curing to a durable, flexible consistency Alkali resistance
Excellent adhesive and elongation properties Reduce construction time
Designed for use on new and existing structures Easy application
Contains no solvent High elasticity
Excellent UV stability
Impermeable
Crack-bridging ability
Low consumption
Sikalastic®-110 Sikalastic®-590
High Elasticity, 1-part Polyurethane Liquid Applied Roof Waterproofing
Bituminous Waterproofing Coating with Improved Ponding Water Capability
Sikalastic®-110 is a water-based 1-part Sikalastic®-590 is a one component
modified polyurethane/bituminous polyurethane-acrylic dispersion with
coating, formulated to form a highly improved water ponding resistance/ excellent
elastic, seamless and crack bridging UV resistance, good crack-bridging
membrane capacity and great aesthetics.
For manual / spray application, Sikalastic®-590
Packaging: Shelf Life: can be appied as coating or a reinforced liquid
20 Kg/pail 12 months applied membrane with Sikalastic® Fleece
Uses: Packaging:
Due to its high elasticity, Sikalastic®-110 Shelf Life:
20 Kg/pail 12 months
can be applied on different structures including those subject to
thermal movement and vibration such as:
Concealed RC flat roof Uses:
Hydraulic structures like swimming pools, water features For waterproofing solutions in both new construction and
External walls to be buried below ground refurbishment projects
Waterproofing coating under tiled areas like podium, For roofs with many details and complex geometry when
bathrooms and balconies accessibility is limited
For cost-efficient life cycle extension of failing roofs
Advantages: For reflective coating to enhance energy efficiency by reducing
Easy application by roller, brush or sprayed, even onto vertical cooling costs (Sikalastic®-590 White)
walls and ceiling
High elasticity Advantages:
High crack-bridging capability Good behavior under limited water ponding
Optimum adhesion onto concrete UV resistant and resistant to yellowing and weathering
Can be applied directly on damp surface Highly elastic and crack-bridging
Non-toxic Non-toxic and VOC compliant water-based coating
Low VOC and Eco-friendly One-component - ready to use
Excellent adhesion on porous and non-porous substrates
Seamless waterproofing membrane
Water vapour permeable
30
LIQUID APPLIED MEMBRANES
Sikalastic-870BT
Spray Applied Polyurea Membrane
Sikalastic -870 BT is a two part, elastic, 100% solids, very fast curing Polyurea spray applied
membrane where exposure to high acidic and alkaline chemical concentrations are present.
Sikalastic -870 BT is for machine application only.
Uses:
For waterproofing applications on steel and concrete.
Typical uses on:
Primary and secondary Mines and mining
containments processes
Waste water treatment plants Ballast tanks
Fertilizer plants and Silage tanks and troughs
transportation
Advantages:
High acidic and alkaline chemical resistance
High resistance to microbial waste
Fast reactivity and cure time
Almost immediate return to service time
Applicable in temperature from -15°C to 70°C
Performs in constant temperatures from -30°C to 60°C
100% solids
Crack-bridging properties
Advantages: Uses:
1 component pure polyurethane All types of roofs, balconies and decks
1 material for horizontal / vertical areas Retaining walls and basements
1 hour early rain resistant Waterproofing and planter boxes
UV resistant Eliminates soldering of cracked non-ferrous roof valleys and
High solid content flashings
Root penetration resistant For Exposed Application
31
BITUMINOUS WATERPROOFING
Bitumen Impregnated Board 35% SikaBit W-15
Expansion Joint Filler Wet-Applied, Modified Bitumen
Designed as a low cost, pre-formed, high Waterproofing Membrane
performing expansion joint filler board for SikaBit W-15 is a double-sided modified bitumen
concrete joints waterproofing membrane for wet application. It
consists of a cross-laminated PE film and two
Packaging: modified bitumen layers covered with transparent
Thickness Width Length release liners
12 mm, 19 mm 4’ (1.22 m) 7’ (2.13 m)
Packaging: Shelf Life:
Uses: 1m x 20m/roll 12 months
Installed against existing concrete at
columns and against adjacent structures or flat work before the Uses:
placement of the subsequent concrete SikaBit W-15 is designed for non-exposed
For floors, paving, and runaways it is installed ½ below the waterproofing application such as:
elevation of the concrete surface when the joint is to be filled Foundations
later to the surface elevation with a proper sealant Basement slabs and walls
Advantages: Podium slabs
Withstand repeated cycles of expansion and compression
without extruding Advantages:
Recovery to min. 75% thickness after compression Safe, easy and fast installation Zero water underflow
Virtually unaffected by temperature changes No need for special equipment Crack-bridging ability
Low moisture absorption Direct application on wet High tear resistance
Durable and easy to handle substrate High puncture resistance
Excellent initial and long term Resistant to chemical
Shelf Life: adhesion corrosion
Unlimited if stored properly Full surface bonding
SikaBit® PRO P-30-5 Sand / SikaBit® PRO P-40-5 Sand / SikaBit® PRO P-40 G-5 MG
Plastomeric Modified Bituminous Waterproofing Membrane
SikaBit® PRO P-30-5 Sand / SikaBit® PRO P-40-5 Sand / SikaBit® PRO P-40 G-5 MG is an APP modified,
bituminous, torch-applied, waterproofing membrane. It is reinforced with a dimensionally stable non-
woven polyester inlay. The underside has a thin polyethylene burn-off film for easy application. It can be
applied to wood, metal and concrete substrates including over existing bitumen roofing membranes.
Top surface finish: Sand (P-30-5 /P-40-5) / Mineral Granules (P-40 G-5 MG)
Packaging:
Thickness Packaging Shelf Life:
P-30-5 3mm 1 x 10m /Roll 12 months
P-40-5 4mm 1 x 10m /Roll
Weight Packaging
P-40 G-5 MG 4 kg/m2 1 x 10m /Roll
Uses:
Waterproofing membrane for: Advantages:
Damp proofing of the exterior walls of basements against Good watertightness
percolating water and damp soil Good elongation and cold flexibility
Flat roofs under protective layers or ballast Good mechanical properties (tensile, tear, shear)
Balconies and terraces under tiles Good resistance to impact
Wet areas Easy to install by torching method
Protection of various substrates in a wide range of applications Choice of primers to suit substrate and weath conditions
Sikalastic® Fleece
Polyester Fleece for Use with Sikalastic® Liquid Applied Membrane Systems
32
Sarnafil G410 Felt / Non-Felt PVC Membrane Sarnafil S327 PVC Membrane
ROOF WATERPROOFING
Polymeric Detailing Membrane For Roof Waterproofing Polymeric membrane for roof waterproofing
Sarnafil® G 410 L is a multi-layer, Sarnafil® S 327 L is a polyester reinforced,
synthetic roof waterproofing detailing multi-layer, synthetic roof waterproofing
membrane based on premium-quality membrane based on premium-quality
polyvinyl chloride (PVC) with an inlay of polyvinyl chloride (PVC).
glass non-woven.
It has a unique lacquer coating applied
It has a unique lacquer coating applied to the top of the membrane to reduce
to the top of the membrane to reduce staining from airborne dirt and
staining from airborne dirt and pollutants.
pollutants.
Packaging: Packaging:
1.2 mm 25.0m (approx. 82 kg per roll) 1.2 mm 25.0m (approx. 82 kg per roll)
1.5 mm 20.0m (approx. 78 kg per roll) 1.5 mm 20.0m (approx. 78 kg per roll)
2.0 mm 15.0m (approx. 81 kg per roll) 2.0 mm 15.0m (approx. 81 kg per roll)
Uses: Uses:
Waterproofing detailing membrane for: Waterproofing membrane for:
Exposed flat roofs (Sarnafil® S 327 L or Sarnafil® G 410 L Felt) Mechanically fastened, exposed flat roofs
Concealed flat roofs (Sarnafil® G 476)
Advantages:
Advantages: Outstanding resistance to weathering, including permanent
Outstanding resistance to weathering, including permanent UV irradiation
UV irradiation Excellent weld ability
Excellent weld ability Excellent flexibility in cold temperatures
Excellent flexibility in cold temperatures High dimensional stability
Excellent dimensional stability High tensile and tear strength
High water vapour permeability High resistance to mechanical impact
High solar reflectance (in case of white color top layer) High water vapour permeability
Available in various colors High solar reflectance (in case of white color top layer)
Reduced dirt pick-up due to lacquer coating Available in various colors
Recyclable Reduced dirt pick-up due to lacquer coating
Recyclable
Shelf Life
Product does not expire if correctly stored. Shelf Life
Product does not expire if correctly stored.
Uses:
Waterproofing membrane for:
Loosely laid applications
Planted roofs
Detailing
Packaging:
Length : 25 m
Width : 2.0 m
Thickness : 1.5 mm
Mass per unit area : 1.84 kg/m2
Tensile strength,
Longtitudinal (MD) : ≥ 10N/mm2
Transversal (CMD) : ≥ 10N/mm2
Elongation,
Longtitudinal (MD) : ≥ 180 %
Transversal (CMD) : ≥ 180 %
33
SEALING & BONDING
SEALING & BONDING
High-performing and durable sealants, tapes, spray foams
and specialty solutions (e.g., fire-rated sealants) for building
envelopes & interior finishing.
34
POLYURETHANE SEALANTS
Sikaflex® Construction SikaHyflex-250 Facade
Sealant for Building Joints High-Performance Joint Sealant for Concrete,
Sikaflex® Construction is a one-component, Masony and EIFS Facade
moisture-curing, elastic joint sealant based on SikaHyflex-250 Facade is a one-component, moisture-
polyurethane curing, low modulus elastic joint sealant
Packaging:
600 ml sausage (20 pieces per box) Packaging:
600 ml sausage (20 pieces per box)
Color:
Concrete Grey & White Color:
Uses: Concrete Grey
Designed for movement and connection joints on porous Uses:
substrates as well as indoor and outdoor sealing applications. Designed for the elastic joint sealing and waterproofing of
movement and connection joints in building envelopes.
Advantages: Suitable for EIFS facades.
n One-component, ready to use
n Fast-curing Advantages:
n Non-sag n High movement capability
n Can be overpainted (over paintability test must be conducted) n Very good weathering resistance
n Bubble-free curing n Low stress to the substrate
n Solvent-free
Movement Capability: n Bubble-free curing
±25% (ISO 9047) n Very low emissions
n Good adhesion to many different substrates
Shelf Life: n Can be overpainted (over paintability test must be conducted)
12 months
Movement Capability:
+100%/-50% (ASTM C719)
Shelf Life:
15 months
Sikaflex® PRO-3
High Performance Sealant for Trafficable and Specialty Joints
Sika® Boom AP
High Yield Expanding Foam
Uses: Packaging:
Used for fixing, insulating and filling connection joints around 500 ml, 750 ml (12 pieces per box)
window and door frames, pipe entries around air conditioning vent
and roller blind housing, etc. Color:
Used to insulate against sound, cold, draughts, etc. Light yellow
35
PASSIVE FIRE PROTECTION SOLUTIONS
PRODUCTS FOR LINEAR SEALS
Please contact our Technical Specialist to further assist you on your requirements for Passive Fire Protection
36
PASSIVE FIRE PROTECTION SOLUTIONS
Please contact our Technical Specialist to further assist you on your requirements for Passive Fire Protection
37
BONDING SOLUTIONS PRIMER & AUXILIARY PRODUCTS
SikaBond®-124 Instant Nails
High Strength Multipurpose Adhesive
SikaBond®-124 Instant Nails is a one-part, rigid, construction adhesive with high final strength NEW!
that bonds most common construction material substrate.
Uses:
An adhesive to bond most construction components,
such as:
n Skirting boards n Mouldings
n Wooden frames n Hard PVC profiles
n Battens n Sheet boards
n Panels n Metal protection angles
Advantages:
n Easy to apply
n Rapid initial grab after flash off
n Rapid strength gain
n Wide adhesion range
Advantages:
Very easy to apply Compatible with
Good adhesion to bituminous substrates
many substrates Can be over-painted
Weather proof Can be applied at low
Self-adhering temperatures
38
FLOORING & COATING
39
EPOXY FLOORING
Sikafloor®-161 HC Sikafloor®-263 SL HC
Two-Part Epoxy Primer, Levelling Mortar, Two-Part Epoxy Self-Smoothing
Intermediate Layer and Mortar Screed and Broadcast System
Sikafloor®-161 HC is an economic, two part, Sikafloor®-263 SL HC is a two-part, economic
solvent free, low viscosity, epoxy resin and multi-purpose binder based on epoxy resin
Packaging: Packaging:
10 Kg/set, 20 Kg/set
20 Kg/set
Uses:
Uses: Self-smoothing and broadcast system for
For priming concrete substrates, concrete and cement screeds with normal
cement screeds and epoxy mortars up to medium heavy wear (e.g. for storage
For normal to strong absorbent and assembly halls, maintenance
substrates workshops, garages, loading ramps, etc.)
Binder for leveling mortars and The broadcast system is recommended for
mortar screeds wet process areas, e.g. in beverage industry,
Intermediate layer underneath food industry, maintenance hangars etc.
Sikafloor®-263 SL HC and Sikafloor ®-264 HC
Advantages:
Advantages: Highly fillable
Low viscosity Good chemical and mechanical resistance
Good penetration Easy application
Excellent bond strength Economical
Solvent-free Liquid proof
Easy application Solvent-free
Short waiting time Gloss finish
Multi-purpose Slip resistant surface possible
Uses: Packaging:
Roller coat for concrete and cement screed Component A : 12.30 kg/pail
with normal up to medium heavy wear e.g. Component B : 3.20 kg/pail
storage and assembly halls, maintenance Component C : 7.80 kg/bag
workshops, garages and loading ramps Component D : 3.10 kg/bag
Seal coat for broadcast systems Total pack size : 26.4 kg per set.
Advantages: Advantages:
Good chemical and mechanical resistance Decorative with endless finish Economical
Easy application combination achievable Solvent-free
Economical Good chemical and Tight, semi glossy
Liquid proof mechanical resistance surface
Solvent-free Easy application Matt finish possible
Gloss finish
Slip resistant surface possible Uses:
Sikafloor®-263 SL Décor may only be used by experienced professio-
Shelf Life: nals. For the production of decorative self-smoothing floors on con-
12 months crete and cement screeds with normal up to medium heavy wear e.g.
storage and assembly halls, laboratories, pharmaceutical industry,
canteens, offices, shops etc.
Shelf Life:
12 months
40
POLYURETHANE FLOORING
Sikafloor®-21 PurCem LP
Medium To Heavy Duty, Self-Smoothing, Polyurethane Hybrid Flooring Screed
Sikafloor®-21 Purcem LP is a three part, water dispersed medium to high strength coloured
polyurethane modified, cement and aggregate screed with self
smoothing properties.
Advantages:
Good chemical resistance. Resists a wide range of organic and inorganic acids, alkalis, amines, salts and solvents.
Please refer to the Chemical Resistance Chart or consult your local Technical Department
Similar coefficient of thermal expansion to concrete, allowing movement with the substrate through normal
Thermal cycling. It will perform and retain its physical characteristics through a wide temperature range from
-5 °C up to +65 °C
Bond strength in excess of the tensile strength of concrete. Concrete will fail first
Non tainting / odourless
VOC free
High mechanical resistance. Behaves plastically subject to impact. Will deform but will not crack or debond
High abrasion resistance resulting from its silica aggregate structure
Can be applied to substrates with high moisture content (7 days old or mature damp concrete)
Jointless. Extra expansion joints are not necessary; simply maintain and extend existing expansion joints
up through the Sikafloor® -PurCem flooring system
Easily maintained
Uses:
In areas subject to heavy loading, abrasion and high chemical
exposure, to provide a 6 to 9 mm thick, hard wearing surface,
such as in:
Food process plants
Chemical plants
Processing areas
Laboratories
Workshop
Advantages:
Excellent chemical resistance Easily maintained
High mechanical resistance Fast curing
High abrasion resistance Easy to apply
Steam cleanable at 9 mm thickness Durable
Thermal resistance Jointless
Slip resistance Matte finish
41
POLYURETHANE FLOORING
Sikafloor®-31 PurCem® LP
Solvent Free Polyurethane Coating
Sikafloor®-31 PurCem® LP is a three part, solvent free, high build, coloured, matt finish, polyurethane modified, cement and aggregate coating
with excellent chemical resistance and very good resistance to abrasion and mechanical damage. Typically applied in two coats for a total of
0.2 - 0.25 mm.
Packaging: Shelf Life
Part A: 1.60 kg plastic drum Part A : 12 months from date of production. Protect from freezing.
Part B: 1.40 kg plastic jerrycan Part B : 12 months from date of production. Protect from freezing
Part C: 1.70 kg plastic bags Part C : 6 months from date of production. Must be protected from
Part A+B+C: 4.7 kg ready to mix units humidity
Uses:
Sikafloor®-31 PurCem® LP may only be used by experienced professionals. Sikafloor®-31 PurCem® LP is designed to be used as:
Stand alone, high build coating or as a seal coat for covings and details performed with Sikafloor®-29 PurCem® LP or other products
in the Sikafloor®- PurCem® range
To provide an improved aesthetic finish to the products in the broadcast texture range of Sikafloor®-PurCem®
Suitable for concrete protection providing physical resistance (Principle 5, method 5.1 of EN 1504-9)
Suitable for concrete protection providing chemical resistance (Principle 6, method 6.1 of EN 1504-9)
As a chemical resistant concrete coating in places such as:
Food processing plants, in wet or dry process areas, freezers and coolers Containment areas
Pharmaceutical plants Chemical process areas
Advantages:
Excellent chemical resistance. Resists a wide range of organic and inorganic acids, alkalis, amines, salts and solvents
Allows use of severe cleaning regimes in the Food and Beverage industry. Please refer to the Chemical Resistance Chart or consult your
local Technical Dept.
Very low VOC emissions
Water based Odourless formulation
Excellent long term wear resistance from a two coat application
Rapid one step application. Normally, no concrete primer required
Economical and easy to apply
Good hiding power
Tolerant to substrate moisture. Can be applied on to 7 to 10 day old concrete after adequate preparation and with a tensile bond
strength in excess of 1.5 N/mm2 (218 psi)
Bio-static surface. Does not contribute to the growth and development of bacteria or fungi.
Wide range of application temperatures +10°C - +35°C
Sikafloor®-29 PurCem LP
High Strength Polyurethane Coving And Detailing Mortar
Sikafloor®-29 PurCem LP is a three, water dispersed, vertical grade, coloured polyurethane modified, cement and aggregate mortar
for detailing work and vertical rendering. It has a finely textured smooth aggregate appearance which offers excellent resistance to
abrasion, chemical attack and mechanical damage. Typically installed at 3 - 9 mm thickness.
Packaging: Shelf Life
Part A: 1.60 kg plastic drum Part A : 12 months from date of production. Protect from freezing.
Part B: 1.40 kg plastic jerrycan Part B : 12 months from date of production. Protect from freezing
Part C: 19.00 kg plastic lined, double paper bags Part C : 6 months from date of production. Must be protected from
Part A + B + C : 22.0 kg ready to mix units humidity
Uses:
Sikafloor®-29 PurCem LP may only be used by experienced professionals. In combination with the rest of the PurCem® range in
concrete substrate areas, to provide vertical, coving and detailing solutions in areas of abrasion and high chemical exposure, such as in:
Food processing plants, in wet or dry process areas, freezers and coolers, thermal shock areas
Chemical plants
Laboratories Suitable for concrete protection providing physical resistance (Principle 5, method 5.1 of EN 1504-9)
Workshops Suitable for concrete protection providing chemical resistance (Principle 6, method 6.1 of EN 1504-9)
On properly prepared and supported steel surfaces, such as in:
Steel decks
Overpasses or platforms
Advantages:
Excellent chemical resistance. Resists a wide range of organic and inorganic acids, alkalis, amines, salts and solvents
Please refer to the Chemical Resistance Chart or consult your local Technical Dept
Designed specifically for trowel applications to vertical surfaces
Similar coefficient of thermal expansion to concrete, allowing movement with the substrate through normal thermal cycling. It will
perform and retain its physical characteristics through a wide temperature range from -40 °C (-40 °F) up to +140 °C (284 °F)
Bond strength in excess of the tensile strength of concrete. Concrete will fail first
Non taint, odourless
VOC free
High mechanical resistance. Behaves plastically subject to impact. Will deform but will not crack or debond
Slip resistance. Natural textured surface provides anti-slip traction
High abrasion resistance resulting from its silica aggregate structure
It is possible to apply on to 7 to 10 day old concrete after adequate preparation and with a tensile bond strength in excess of
1.5 N/mm2 (218 psi)
Sikafloor®-29 PurCem LP detailing mortar can withstand moisture vapor transmission values of 12 lbs/1000 ft2 when tested in
accordance with the ASTM F 1869 Anhydrous Calcium Chloride Test Method
Fast curing will allow foot traffic after twelve hours and full service after two days. Production downtime is cut to an absolute minimum
Jointless. Extra expansion joints are not necessary; simply maintain and extend existing expansion joints up through the
Sikafloor®-PurCem® flooring system
Easily maintained
Wide range of application temperatures +10 °C - +35°C
42
POLYURETHANE FLOORING
Sikafloor®-315
Abrasion Resistant Aliphatic Polyurethane Seal Coat.
Sikafloor® -315 is a three and four parts, high solids, abrasion resistant,
aliphatic polyurethane based textured coatings.
Packaging: Pigmented Set
Un-Pigmented Set Part A: 2.83 kg
Part A: 2.83 kg Part A: 2.83 kg Part B 0.42 kg
Part B: 0.42 kg Part B: 0.42 kg Part C 2.13 kg (filler)
Part C: 2.13 kg (filler) Part D: 0.62 kg(pigment pack)
Part A+ B+C: 5.38 kg/set Part A+ B+C+D: 6.0kg/set
Uses:
Seal coat for Sikafloor epoxy floors
High traffic areas requiring wear resistant coatings
Advantages:
High Solids
Excellent abrasion, wear , impact resistances
Good UV resistance, non-yellowing
Textured surface
Good Chemical Resistance
Available un-pigmented (3 parts) and pigmented (4 parts)
Shelf Life
12 months from date of production if stored properly in
original, unopened and undamaged sealed packaging in dry
conditions at temperatures between +5°C and +30°C.
43
RESIN/CEMENTITIOUS FLOORING
Sikafloor®-82 EpoCem®
3-Part Self-Smoothing Epoxy-Cement Floor Topping
A three-component cementitious epoxy-modified self-smoothing floor topping
Packaging: Shelf Life:
31 Kg/set 12 months
Uses:
As a self-smoothing topping of 4-7 mm thickness:
Leveling or patching concrete surfaces, both unfinished and after grinding
or planning
Floor toppings on damp substrates which are not ventilated from below,
and where aesthetic appearance is not a primary consideration
Wear resistant resurfing compound on concrete
Floor toppings beneath epoxy floor coatings
Self-smoothing toppings as a substrate for synthetic floor coatings, carpets
or wooden parquet
Extended with quartz sand, can be used as a patching and repair mortar for:
- Surfaces that are to be coated with epoxy resins
- Designed for use on cementitious, mineral-based substrates
Sikafloor® Curehard-24
Sodium Silicate Based Transparent Surface Hardener, Dust Proofer, Sealing And Curing Compound
For Concrete
Sikafloor® CureHard-24 is a high solids, one part, clear sodium silicate based
liquid to cure, harden and seal fresh or hardened concrete.
Packaging: Shelf Life:
210 Liters/drum 12 months
Uses: Advantages:
Sikafloor® CureHard-24 may only be used by Ready to use
experienced professionals. Easy to apply
Horizontal old or new concrete surfaces, where a hard surface Improved chemical and abrasion
with light to moderate abrasion resistance is required e.g. resistance compared to
warehouses, industrial plants, stores, shopping malls, parking untreated concrete
structures, service stations, hangars etc. Reduced dusting of concrete floors
On concrete slabs where no specific curing efficiency or standards Slightly reduces loss of water of new concrete while
are required setting
Suitable for interior or exterior applications Improves cleanability
Dust-proofing of prefabricated concrete elements Non-yellowing
Suitable for protection against ingress (Principle 1, method 1.2 of Good penetration
EN 1504-9)
CEMENTITIOUS FLOORING
Solvent free
Suitable for physical resistance (Principle 5, method 5.2 of EN Colourless and odourless
1504-9)
44
CEMENTITIOUS FLOORING
Lanko 162 RD Flow Prime Lanko 123 Lankoself Thick
Bonding Primer Self-Levelling Repair Mortar
LANKO 162 RD FLOW PRIME is a LANKO 123 LANKOSELF THICK is a ready-
bonding primer which creates a to-wet self-levelling screed for preparing
bonding key on smooth and sealed old and new interior floors before applying
substrates or porous substrates. It or laying carpet, vinyl sheeting, tiles, par-
improves the condition of the surface, quet, rubber or floor paints. Application
the bonding strength of the mortar thickness is from 7mm to 20mm.
and reduces the bubble effect [pin
hole], absorption capacity of the Packaging: Shelf Life:
substrate. 25kg bag 6 Months
Uses:
Packaging: Shelf Life: Suitable for rooms, hallways, lobby
20L container 12 Months and all interior foot traffic.
45
ACCESSORIES
Extender T
Thickening Agent For Sikafloor® Flooring Resins
Sika® Extender T is an inert, fine, white, fibrous polymer powder used as a thickening
agent for Sikafloor® flooring resins.
Packaging:
20kg pail
Uses:
Applications on horizontal surfaces to create custom surface textures
Applications on vertical surfaces to hold the resin in place during curing
Crack and pore filler to seal horizontal and vertical surfaces
Advantages:
Allows for viscosity adjustment of Sikafloor® product applications
Economical, easy to mix and use
No effect on pot life or cure rate
Low addition rate required to change resin viscosity
Non carcinogenic
Inert and non-reactive
Shelf Life
24 months
Sikadur 501
Sikadur 501 is a light colored kiln dried graded quartz sand for used in Sika coatings and
membranes to provide a mechanical key for subsequent levelling materials.
It can also be used to bulk out certain Sika screeds and mortars as well as being used as
an anti-slip additive.
Available in three grain sizes:
Item Size (mm)
SikaDur 501 #5 0-0.3
SikaDur 501 #4 0.3-0.71
SikaDur 501 #3 0.71-1.7
Shelf Life:
24 months
46
PRIMER & CORROSION PROTECTION
Sika® Permacor®-1705 Sika® Permacor®-2706 EG
Solvent Containing 1-Pack Zinc- Epoxy-Mio-Coating
Phosphate Primer for Steel
Sika® Permacor®-2706 EG is a 2-pack
Sika Permacor-1705 is a solvent-borne coat based on epoxy resin containing
1-pack alkyd resin primer. micaceous iron oxide with high
mechanical resistance and
Packaging: outstanding adhesion.
Sika Permacor-1705 : 25 Kg/set
Packaging:
Uses: 24 kg and 3 kg net
Sika Permacor-1705 is used as an
anti-corrosive primer for atmospheric
exposed steel surfaces. Uses:
Sika® Permacor®-2706 EG may only
Advantages: be used by experienced professionals. Sika® Permacor®-2706 EG is
Fast drying, universally applicable as primer with a great range used as primer for galvanized steel and also as primer under Sika®
of dry film thicknesses. Unitherm® and Sika® Pyroplast® fire protection systems, as well as
intermediate coating for atmospheric corrosion protection
Shelf Life: on steel.
24 months
Advantages:
Coating with high mechanical resistance
For primed steel, directly on galvanized steel,sprayed zinc,
stainless steel and aluminium
High content of micaceous iron oxide offers dense and highly
resistant layers
Shelf Life:
24 months
47
PRIMER & CORROSION PROTECTION
Sika Poxicolor® Primer HE NEW
High Solid, Surface-Tolerant Epoxy Primer Coat for Steel and Galvanized Surfaces
2-pack primer coat based on epoxy resin.Economically and high-performance corrosion protection
also for manually de-rusted surfaces and surfaces prepared by high-pressure water jetting. Low
solvent content according to Protective Coatings Directive of German Paint Industry Association
(VdL-RL 04).
Uses:
Sika Poxicolor® Primer HE NEW may only be used by experienced professionals. Tough hard, versatile
overcoatable primer for corrosion protection on steel exposed to atmosphere. Especially suitable for
use on surfaces where only manually de-rusting (wirebrushing or power tool cleaning) or high-pressure
water jetting is feasible or
economic.
Advantages:
Surface tolerant Fast initial drying and full hardening
High layer thickness and diffusion resistance combined with High-build application
very good surface wetting properties and adhesion result in Very economically due to high coverage
a very high safety margin for good corrosion protection
48
FIRE RESISTANT COATING
Sika® Unitherm® Steel W-120 Sika® Unitherm® Steel S Exterior
Water Based Fire Protective Coating Solvent Based Fire Protection Coating
System for Steel, Interior Use for Steel, Fast Dry, Interior*/Exterior Use
Sika Unitherm Steel W-120 is a water borne Sika Unitherm Steel S Exterior is a an
fire protection coating forinterior structural ecological thin film fire protectioncoating system
steel work. Sika Unitherm Steel W-120 is a which has to be used for structural steelwork
very fast drying and mechanical tough coating. which is subject to weathering, high humidity,
Sika Unitherm Steel W-120 is forming a heat maritime environment etc.(exterior condition).
insulating layer under the influence of fire and * Sika Unitherm Steel S Exterior can also be used
improves the fire resistance of steel parts. for interior steel constructions as long as they are
not designed to German AgBB
Packaging: Shelf Life: requirements.
25 Kg Pail 18 months
Sika Unitherm Steel S Exterior is forming a heat insulating layer
Uses: under the influence of fire and improves the fire resistance of steel
For indoor use on structural steel members like columns, girders and parts like columns, girders and framework.
framework with a highly effective protection to delay the steel from
reaching critical temperature. Note: With critical situation i.e. fre- Packaging: Shelf Life:
quent formation of condensation and/or heating up of surfaces above 25 Kg and 5kg/set 18 months
45°C, possible special measures should be taken.
Uses:
Advantages: For indoor use on structural steel members like columns, girders
Ecological and efficient water based fire protection coating and framework with a highly effective protection to delay the steel
VOC 0 g/l from reaching critical temperatures.
Free of Halogens and aromatic solvents
Classified according ETAG 018 part2, Sika Unitherm Steel W-120 Advantages:
meets Type Z1 (i.e. internal conditions includes temperatures till Fast drying intumescent coating
+5°C and high humidity) without topcoat Applicable on steel constructions exposed to weathering
Comply with the highest Quality requirements (Level 4) of DGNB CE-classified according ETAG 018 part 2, the system meets
Preserves the appearance of a steel construction Type X classification (i.e. exterior conditions)
Applicable to filigree steel structures and complex steel building Preserves the appearance of a steel construction
elements Applicable to filigree and complex steel building elements
Simple application, does not increase static load VOC < 350 g/l
Individual coloration possible with corresponding topcoat, various Simple application, does not increase static load
colour shades in RAL, DB, others available Individual coloration possible with corresponding topcoat,
various colour shades in RAL, others available
Sika® Unitherm® Platinum is a solvent-free, 100 % solids, 2-pack, modified epoxy based
intumescent fire protection coating for internally or externally exposed structural steel, where it
provides highest durability and combined corrosion protection (up to ISO 12944, corrosivity
category C5) and fire protection (up toR90). It is easily applied with standard airless spray
equipment, requires no reinforcement, cures rapidly to a very tough and damage resistant finish,
ready for handling and transport at the next day.
Uses:
Sika® Unitherm® Platinum may only be used by experienced professionals. It is designed primarily for inshop application on
structural steel that is to be internally or externally exposed. No additional sealers or top coats are required unless specific
lightfast coloured finishes are required.
Advantages:
Solvent-free, 100 % solids Durable for a long service life
Low odour and zero flash risk Expected life cycle > 25 years
Halogen-free Meets Type X classification (i.e. exterior conditions), no
Easy application with single-leg spray equipment primer and top coat needed
Can be applied in 1-coat for up to 4 mm dry film thickness, Excellent corrosion protection properties according to ISO
no additional reinforcement required at any time 12944, corrosivity class C5 (as coating system)
Application directly on blast cleaned steel surfaces Complies with the quality requirements (level 3) of DGNB
Rapid cure - next day handling and transport various colour shades in RAL, others available
Very tough - minimal handling damage and touch-up costs
Highly resistant to mechanical impact and damage in service
Suitable for small sections and complex steel sections
Very good cosmetic appearance
49
FIRE RESISTANT COATING
Sika® Unitherm® Platinum-120
Solvent-Free, Ultra High Build, 2-Pack, Modified Epoxy Based Intumescent Fire Protection
Coating For Internally or Externally Exposed Structural Steel
Sika® Unitherm® Platinum-120 is a solvent-free, 100 % solids, 2-pack, modified epoxy based
intumescent fire protection coating for internally or externally exposed structural steel, where it
provides highest durability and combined corrosion protection (up to ISO 12944, corrosivity class
C5) and fire protection (up to R120). It is easily applied with standard airless spray equipment,
requires no reinforcement, cures rapidly to a very tough and damage resistant finish, ready for
handling and transport at the next day. Solvent-free according to Protective Coatings Directive of
German Paint Industry Association (VdL-RL 04).
Packaging: Shelf Life:
17.2 Kg 12 months
Uses:
Sika® Unitherm® Platinum-120 may only be used by experienced professionals. Sika® Unitherm® Platinum-120 is designed
primarily for in-shop application on structural steel that is to be internally or externally exposed. No additional sealers or top
coats are required unless specific lightfast coloured finishes are required.
Advantages:
Solvent-free, 100 % solids Durable for a long service life
Low odour and zero flash risk Expected life cycle > 25 years
Halogen-free Meets Type X classification (i.e. exterior conditions), no primer
Easy application with single-leg spray equipment
Can be applied in 1-coat for up to 4 mm dft (dry film and top coat needed
thickness), no additional reinforcement required at any time Excellent corrosion protection properties according to ISO 12944,
Application directly on blast cleaned steel surfaces corrosivity class C5 (as coating system)
Rapid cure - next day handling and transport Complies with the highest quality requirements (level 4) of
Very tough - minimal handling damage and touch-up costs DGNB
Highly resistant to mechanical impact and damage in service
Suitable for small sections and complex steel sections
Very good cosmetic appearance
50
BUILDING FINISHIING
BUILDING FINISHING
Sets of solutions dedicated to tile setting,
facade protection and decoration, and interior
wall finishing
51
BUILDING FINISHING WALL SOLUTIONS
Lanko 103 PH Lankowall
Ready-To-Use Smooth Skim Rendering Paste
LANKO 103 PH LANKOWALL is a ready-to-use smooth skim rendering paste for thickness
0.3 - 4mm used to level surface defects in concrete or render.
Uses:
Can be applied for interior and exterior walls and ceilings
0.3 - 4mm thickness.
Interior / Exterior Interior Only
Shuttered Concrete Bricks
Reinforced concrete Gypsum block or board
shell-work Gypsum (consult website)
Precast concrete Lightweight concrete block
Concrete Soffits (with primer)
Possible covering materials: Thick plastic coating, paint, wallpaper,
fabric and bonded plastic
Advantages:
Ready-to-use and easy to apply
Perfectly white smooth finish
For interior and exterior use
Can be exposed or painted (no primer needed)
Interior / Exterior
Reinforced concrete
Precast concrete panels Advantages:
Traditional rendering mortars Perfectly smooth finish
High bonding strength
Interior only For interior or exterior use
Lightweight concrete or Can be exposed or painted on (no primer needed)
lightweight block (with primer)
Gypsum Board (in gypsum mix)
52
BUILDING FINISHING WALL SOLUTIONS
Lanko 113 Lankopatch
Used For The Repair Of Surface Defects On Concrete Panels,
Reinforced Concrete And Precast Concrete
LANKO 113 LANKOPATCH is a fine rendering mortar for the repair of surface defects on concrete
panels or traditional renders of walls or ceilings with thickness of 2mm to 10mm.
Uses: Advantages:
n Interior and exterior walls and n Easy to use
ceilings from 2mm to 10mm thickness n High bonding strength
n Reinforced concrete n For interior and exterior application
n Precast concrete n Compatible with decorative wall coverings
n Precast concrete panels
n Traditional rendering
53
BUILDING FINISHING WALL SOLUTIONS
Parex 121 Optimum
Basecoat And Adhesive
PAREX 121 OPTIMUM can be used as a basecoat for Parex EIFS and other architectural coatings. It can also be
an adhesive used to laminate EPS to common substrates. PAREX 121 OPTIMUM can be applied without the
addition of cement and mixed onsite with water. It is bent in class workability and features an extended pot life.
DAVCO Parex 201 Stuccowall is a white cement based exterior wall finish. It is ready-to-wet
and requires minimal maintenance.
Packaging:
25 kg net weight
Coverage:
Coverage will vary depending on substrate, thickness and texture of the application.
Shelf Life:
12 Months
Uses: Uses:
n Aids finishes in resisting chalking n Protects finishes from harmful UV light
n A protective exterior acrylic-based coating. Compatible with n Well-suited for use with darker colors to increase fade
Parex finishes. resistance
n Masonry Sealer n Aids finishes in resisting chalking
n A protective exterior acrylic-based coating. Compatible with
Shelf Life: Parex finishes.
12 Months n PAREX 610 for application requiring reduced gloss
n Masonry Sealer
54
BUILDING FINISHING TILING SOLUTIONS
Davco Dustless Premium
Premium Grade (C2S1 classification) TTB Tile Adhesive For All Types of Tiles
Davco Dustless Premium is a premium grade, thick or thin bed, cement-based tile adhesive
specifically formulated to provide higher coverage, easier application, longer open time and
high bond strength. It has low shrinkage capability.
Packaging:
Uses:
Types of Tiles: Suitable for porous and non-porous tiles i.e glass mosaics,glazed glass ceramics,
granite, slate and natural stones.
Substrates:
n Walls/floors, interior/exterior application
n Concrete, cement renders / screeds, block work,rendered brickwork and mortar leveling
n Smooth and even lightweight concrete block or thick bed application to level uneven parts
n Waterproofing membranes and immersed area especially swimming pools
Advantages:
n Easy-to-use, just mix with water or n Interior and exterior application
DAVCO Davelastic n Can be used for tile-on-tile application
n High bond strength
n Higher coverage
n Use on both walls and floors
Shelf Life:
12 months
Packaging:
25kg bag
Uses:
Can be used to lay tiles onto concrete, cement render, block work and rendered brickwork
surfaces. It can be used on walls and floors in both interior and exterior applications. (For
consultation on tile sizes)
Advantages:
n Easy - to - use, just mix with water or DAVCO Davelastic
n High bonding strength
n Non-toxic, non-flammable
n Quick grip
Shelf Life:
12 months
Uses:
For standard sized tiles (up to 60cm x 60cm) and all porous tiles such as ceramic tiles,
ceramic mosaics and baked clay tiles onto rendered concrete. tiles onto rendered concrete.
Advantages:
n Can be used for internal and external floors, internal walls (for consulation,
depending on tile size).
n Easy to use, just mix with water or DAVCO Davelastic.
n Can be used to lay tiles in wet areas such as shower floors etc.
n Non-toxic, non-flammable
n Easy mixing and tiling, saves time and costs
55
BUILDING FINISHING TILING SOLUTIONS
Davco Standard Tile Adhesive
Thick or Thin Bed TTB
DAVCO Standard Tile Adhesive is an economical thick or thin bed (TTB) cement based tile adhesive.
Ideal for laying the following tile types: ceramic tiles, baked clay tiles, quarry and most monocottura
tiles unto interior and exterior walls and floors.
Packaging:
25kg bag
Uses:
For standard sized tiles (up to 60cm x 60cm) and all porous tiles such as ceramic tiles, ceramic
mosaics, baked clay tiles and laterite tiles onto rendered concrete.
Advantages:
n Can be used for internal and external floors, internal walls (for consulation, depending on
tile size)
n Easy to use; just mix with water or DAVCO Davelastic
n Can be used to lay tiles in wet areas such as shower floors, etc.
n Non-toxic, non-flammable
n Easy mixing and tiling; saves time and cost
Shelf Life:
12 months
Advantages:
n Extra fine and smooth - No scratch on tiles
n Good strength, adhesion and crack resistance
n Prevents mold and bacteria growth
Shelf Life:
12 months
56
FFI & INDUSTRY
57
SILICONE SEALANTS
Sikasil® SG-18 Sikasil WS-305KR
One-Part Neutral-Curing Structural Silicone Adhesive Weatherproofing Sealant
Sikasil® SG-18 is a neutral-curing silicone adhesive One-part, silicone-based, moisture curing,
with excellent adhesion to a wide range of substrates low modulus elastic weather sealant
Packaging:
Sikasil® SG-18 is manufactured in 600ml sausage (20 pieces per box)
accordance with ISO 9001 quality Color:
assurance system and the Black, White, Grey
Responsible Care Program
Uses:
Packaging: For weatherproofing and sealing applications where
600ml sausage (20 pieces per box) durability under severe conditions is required
Color:
Black Advantages:
Ready-to-use, one-part sealant
Uses: Neutral-curing
Structural glazing adhesive and other bonding applications UV and weathering resistant
where superior resistance to UV radiation, high temperature and Highly flexible
weathering is required Complies with ASTM C920 class 50, TT-S 001543 A,
TT-S-00230 C, EN 15651-1, -1 (F EXT-INT CC 25LM, G CC 25 LM)
Advantages:
One-part structural glazing system Movement capability:
Neutral-curing ±50%
UV and weathering resistant
High mechanical strength Shelf Life:
Ready to process 15 months
High modulus
Complies with ASTM C1184, ASTM C920 class 12.5,
ETAG 002, EN 1279-2
Movement capability:
±12.5%
Shelf Life:
12 months
Sikasil® SG-500 CN
Two-Part, Neutral-Curing, Structural Silicone Adhesive
Sikasil® SG-500 CN is a two-part, high-modulus, neutral-curing structural silicone
adhesive
Uses:
For structural glazing and similar high demanding industrial
application
Advantages:
Two-part structural glazing system
For machine application
Neutral-curing
Fast vulcanization and through-cure
Excellent UV and weathering resistance
High mechanical strength
Complies with ASTM C1184 ASTM C920 class 25, GB 16776-2005
Movement capability:
±12.5%
Shelf Life:
Part A - 15 months
Part B - 12 months
58
SIKA® FULL RANGE SOLUTIONS
FOR CONSTRUCTION & INDUSTRY
Concrete Refurbishment Waterproofing
WHO WE ARE
Sika AG, Switzerland, is a globally active specialty chemicals company. Sika supplies the building and
construction industry as well as manufacturing industries (automotive, bus, truck, rail, solar and wind
power plants, facades) Sika is a leader in processing materials used in sealing, bonding, damping,
reinforcing and protecting loadbearing structures. Sika’s product lines feature high quality concrete
admixtures, specialty mortars, sealants and adhesives, building finishing solutions, damping and
reinforcing materials, structural stregthening systems, industrial flooring as well as roofing and
waterproofing systems.
SIKA PHILIPPINES
Sika Philippines Inc., a wholly-owned subsidiary of the Sika Group, has been serving the Philippine
Market since March 1994.
Like us on
@Sika Philippines Website: phl.sika.com
@Davco Philippines www.davco.com.ph