Professional Documents
Culture Documents
Saba Tariq 061 CN Lab 4
Saba Tariq 061 CN Lab 4
Saba Tariq 061 CN Lab 4
Date: 20th-October-2022
LAB TASKS
10. Connect end station and server with Switch. The green dots show that
connection is working fine.
Connection working fine:
11. Double left click on any end station and select Desktop option.
12. Select IP configuration option.
13. Verify the assignment of the IP address by placing cursor on any end
device.
14. Double left click on server open config tab. Select HTTP services and
make sure the service is on by clicking on ON option.
HTTP service:
15. Select FTP services and make sure the service is on by clicking on ON
option. Create a new user by typing user name and password in
respective fields.
FTP service:
16. Select any permission i.e read, write etc by selecting the respective
check box.
17. Add the new user to the list by clicking the plus button.
IP configuration of Server.
18. On the end station access the web browser from the desktop tab.
19. In the URL enter the IP address of the server the default Cisco packet
tracer page opens.
Cisco packet trace open:
20. Open the command prompt-> write FTP Server IP addresses. It would
prompt with user name. Provide valid user name and password as
created in step 15. FTP mode will be turned on.
Setting Gateway and DNS server address: